Basic Information

   

     

Name : Dongfeng DIAO   
Present-Title: Professor&Director      
Key Laboratory of Education Ministry for Modern 
Design and Rotor-Bearing System
Xi’an Jiaotong University;

Institute of Nanosurface Science & Engineering(INSE)

Shenzhen University
TEL:0086-29-8266-9151/755-26902415
Email:dfdiao@mail.xjtu.edu.cn     
    
Editoral Board:Lubrication Science, Friction  
     

 


I. Qualifications
1979.09 to 1983.07     B.S.:    Changchun Institute of Optics and Fine Mechanics (CAS, China)
1983.09 to 1986.07     M.S.:  Changchun Institute of Optics and Fine Mechanics (CAS, China) 
1988.04 to 1992.12     PhD.:  Tohoku University(Japan)
CAS: Chinese Academy of  Sciences 

II. Appointments
1993.2 to 1994.3       Research Associate          School of Engineering, Tohoku University(Japan)
1994.4 to 1994.12     Lecturer                            Faculty of Engineering, Shizuoka University(Japan)
1995.1 to 2002.3      Associate Professor       Faculty of Engineering, Shizuoka University(Japan)
2002.4 to 2005.3      Tengfei Professor                                         School of Mechanical Engineering
                                        Xian Jiaotong University(China)  
2005.4 to present     Professor                                                      School of Mechanical Engineering
                                                                                                              Xian Jiaotong University(China)
2003.11 to 2013.12  Director               Key Laboratory of Education Ministry for Modern Design 
                                                              and Rotor-Bearing System, Xian Jiaotong University(China)
2012.12 to present   Director            Institute of Nanosurface Science and Engineering(INSE),
                                                                                                                    Shenzhen University(China)
III. Relevant Appointmens
1996.3 to 1996.8      JSPS  Fellow         Depart. of Mech. Eng., The Ohio State University (USA)
1997.4 to 1997.5      Academic Visiting      Depart. of Mech. Eng., Louisiana State University(USA)
2000.2 to 2000.3      Academic Visiting   Depart. of Phy. Mater. Sci., City University of Hong Kong
1999.8 to 2001.3      Research Fellow                                       National Aerospace Laboratory(Japan)
2002.12 to Now      Guest Professor                                            Shanghai Jiaotong University(China)
2003.9 to 2004.3      Research Fellow                                                    JWRI, Osaka University(Japan)
2004.5 to 2004.6      Visiting Professor            Depart. of Phy. and Mater. Sci.,CityUniversity of HK
2006.4 to 2006.5      Academic Visiting                            Depart. of Mech. Eng., UCB (Berkley,USA)
2006.7 to 2006.8      Visiting Professor                 School of Engineering, Tohoku University(Japan)
2010.10 to 2010.10  JSPS Fellow                    Depart. of Met. Eng., The University of Tokyo(Japan)
 
IV. Biographical Sketch
      Professor Dongfeng Diao is internationally known for pioneering research in nano- and micro-scale surface sciences and engineering with emphasis on the integration of fundamentals from mechanical engineering, materials science, contact mechanics, plasma physics, and tribology.  
 
      Dongfeng Diao had studied from 1988 to 1992 in Department of Mechanical Engineering of Tohoku Univeristy(Sendai, Japan) to earn a Ph.D in the area of “Spalling mechanisms of ceramic coating in indentation and sliding” (Supervisor: Prof. Koji Kato).  After the study, he was appointed in 1993 as a Research Associate at same department and started his Faculty of life, in studying FEM analysis of contact mechanics of coated surface, interface fracture mechanics analysis of hard coatings in indentation, in sliding, in-situ-Observation of micro-wear and teaching the Tribo-Test of undergraduate students until 1994. He moved from Tohoku University to Shizuoka University(Hamamatsu campus, Japan) in 1994 where he teaches both undergraduate and graduate courses on Mechanical Behavior of Materials and Tribology, he is also involved in the Nanotribology Doctor Course Program at Shizuoka University. During the period of Shizuoka University, Diao developed a traning course on DLC coating technology in Fuji Industrial Research Institute of Shizuoka Prefecture as a consultant for local industries from 1999 to 2001. Diao had worked for the Computer Microtribology and Contamination Laboratory of the Department of Mechanical Engineering at the Ohio State University, Columbus from 1996.3 to 1996.8 as a JSPS Research Fellow and an Associated Professor of Shizuoka University, where he developed a “new method for measuring the fracture toughness of thin film in nanoindentation” in collaborated with Dr. X.Li and Professor B.Bhushan. He managed a number of research projects sponsored by Japanese Ministry of Education, Japan Society for the Promotion of Science and Technology and many companies during work in Japan. Diao had been a supervisor of 8 MS students(Appendix-I) and taught about 1500 undergraduate students in Shizuoka University from 1994 to 2001.  
 
     Diao was invited to be appointed as a “Tengfei” special professor in Xian Jiaotong University in 2002(XJTU hopes its academic level in world ranging to be improved). He was appointed as the director of Laboratory of Education Ministry for Modern Design and Rotor-Bearing System in 2003. After moved back to XJTU, he has established a micro/nano particles tribological environmental laboratory for industry; set-up a Mirror-Confinement-type Electron Cyclotron Resonance (MCECR) plasma sputtering system for nanosurface engineering study; designed and made multi-scale ultra precise measurement system for tribological performance study. He has made the educational curriculums in collaboration with many universities(Tohoku University, Nagoya University, Tokyo University, OSU, UCB, University Southamption, etc) and the technical projects in collaboration with companies(Hitachi Co., Richo Co., NSK Co., etc). He has managed a number of research projects(Appendix-III)and developed  five types of Pin-on-Disk Tribometer for universities and industries. He has founded the "Jiaotong University - Hitachi combination lab" with the Hitachi Mechanical Research Institute. In addition to teaching and research, Diao also devotes significant time to administration duties at the Key Laboratory, his main work includes “Building high level of research and contribution”; “Team building and personnel training” and “Open communication and operation management”.  Every four years, he has faced to a large evaluation event for keeping the position of  Key Laboratory at a higher level. These works promote him to be one of the most interdisciplinary Faculties within the Xian Jiaotong University campus. 
       From 2012-12,  Prof. Diao was appointed as the director of Institute of  Nanosurface Science and Engineering, Shenzhen University, where He starts to build a new
 team for studying the nanosurfacing science and engineering.  
      Over the past fifteen years,   Diao’s research has been at the interfaces of mechanical and materials engineering, surface physics and chemistry, and is characterized by the unique interdisciplinary nature and combination of analytical and experimental techniques that have provided insight into complex surface interaction phenomena. His research is based on the integration of fundamentals from mechanics, materials science, and surface physical chemistry and spans a broad range of length scales, from the macro to nano and molecular levels. The significance of the previous discoveries by Diao is reflected by more than 110 publications in various archival journals, conference proceedings and 10 China patents, the best paper has been cited 110 times, and graduation of 4 PhD and 27 MS students(Appendix-I,II). He has given many invited presentations in Hong Kong, Taiwan, Korea, Japan, USA. He has the eligibilities for memberships of China Association of Science and Technology; Japan Society of Tribology; Japan Society of Materials Science and Japan Association of Science and Technology. His biography has been listed in 18th Edition of Who’s Who Books in the world. And he is the Editoral Board of Journal of  Lubrication Science and the associated editor of Friction.
       Now, he is building  the  Nanosurface Science and Engineering Laboratory , with emphasis on the exploration of various surface microprobe techniques for atomic and molecular level surface analysis, deposition of nanometer-thin and smooth diamond like carbon films for reducing adhesion between silicon devices, ultrathin and ultrasmooth amorphous carbon films used in contact nanopositioning device interface, super low friction coefficient carbon-based films used in the various device surfaces like HDD, bearing, etc., synthesized by Electron Cyclotron Resonance (ECR) plasma sputtering method. The detail would be the following directions;
   
(1) ECR-Plasma-Sputtering Method for Nanocoating and Nanohole Surface Science&Techonology
(2) Design of Multi-Tribometer for Micro/nano-Tribological and Surface Engineering Study
(3) FEM-MD Computer Simulation on Micro/Nano-Tribological and Surface Engineering Study
(4) Mechanisms of Tribo-Demagnetization of  Magnetic Thin Film Device(HDD, Card-Head)
(5) Nanoindentation/Nanoscratching Mechanics of  Thin Film and Biological Surfaces
(6) Graphene Sheets Embedded Nano Carbon-based Coating Technology
(7) ECR Plasma-Based Low Energy Electron and Ion Irradiation Technolgoy for Nanosurface Manufacturing
   
Among his future teaching plans is the development of a graduate course on Nano-Surface Engineering, Nano-Tribology, Nano-Tribotest; Nano-Contat Mechanics for graduate students in the Colleges of Engineering.
 

V. List of  Select  Publications

= 2014 = *corresponding author

(8) Chao Wang and Dongfeng Diao*, The structural transition and magnetic behavor of graphene sheet embedded carbon film prepared under electron  irridiation, 2014-3-17 submitted, review completed.(Carbon under review)

(7) Cheng Chen, Dongfeng Diao*, Xue Fan, Lei Yang and Chao Wang, Frictional behavior of carbon film embedded with controlling-sized graphene nanocrystallites, 2014-3-17 submitted, under revision.(Tribology Letters under review)

(6) Qi Zhang, Dongfeng Diao*, Momoji Kubo, Nanoscratching of multi-graphene layers by molecular dynamics simulations, 2014-3-17 submitted for publication.(Tribology International)

(5) Meiling Guo, Dongfeng Diao*Xue Fan, Lei Yang, Liwei Yu, Scratch Behavior of Re-structured Carbon Coating by Oxygen Plasma Etching Technology for Magnetic Disk Application, in press, 10.1016/j.surfcoat.2014.04.014 (IF1.867-JCR2)

(4) Lei Yang and Dongfeng Diao*,Contact Stress Induced Micromagnetic Behavior in Magnetic Recording Disk, Tribology Letters, 54 (2014) 287-295. (IF1.743-JCR2)

(3) Hongyan Fan, Dongfeng Diao*, Zhiru Yang and Xue Fan, The Lubrication Performance of Nanoparticles-Laden Gas Film in Thrust Bearing under Non-Contact and Contact Conditions,  ASME,Trans., Journal of Tribology, 136 (2014) 034505. (IF1.213-JCR3)

(2) Zhiru Yang, Dongfeng Diao*,   Xue Fan and Hongyan Fan, Nanoparticles-Laden Gas Film in Thrust Bearing, ASME,Trans., Journal of Tribology, 136 (2014) 043501. (IF1.213-JCR3)

(1)  Zhiru Yang, Dongfeng Diao*, Hongyan Fan, Xue Fan,  Experimenal study on Load Capacity of Nanoparticles-laden Gas Film in Thrust Bearing,

         Ind. Lubr. Tribol., accepted.

 

=2013 = 

(10)  Qi Zhang and Dongfeng Diao*, Dangling bonds Induced Cross-Linking Structure in Nanoscrached Graphene Layers,  Surface &Coatings Technology,

        237 (2013) 230-233. (IF1.867-JCR2)

(9) S.Y.Huang, J.J.Huang, Dongfeng Diao* and Y.Z.Duan, Reduction of fluoride-induced corrosion and improvement of frictional properties by coating NiTi archwires with diamond-like carbon films, J Mater Sci: Mater Med 24 (2013) 2287–2292. (IF2.316-JCR2).

(8)  Cheng Chen and Dongfeng Diao*, Tribological Thermostability of Carbon Film with Vertically Aligned Grapheen Sheets, Tribology Letters,

       50 (2013)305-311. (IF1.7-JCR2) .

(7)  Xue Fan, Kenji Nose, Dongfeng Diao* and Toyonobu Yoshida, Nanoindentation Behavior of Amorphous Carbon Films Containing Nanocrystalline 

      Graphite and Diamond Prepared by Radio Frequency SputteringApplied Surface Science, 273 (2013) 816-823.(IF:2.112-JCR2) 

(6)  Zhiru Yang, Dongfeng Diao* and Lei Yang, Numerical Analysis on Nanoparticles-Laden Gas Film Thrust Bearing,  CSME, Trans., J. Mech. Engineering,  26 (2013) 675-680.     

(5)  Dongfeng Diao*, Chao Wang, Xue Fan, Frictional Behavior of Nanostructured Carbon Films, Friction, 1(2013)63-71. 

(4)  Tianxiao Cai, Pengyu Zhang and Dongfeng Diao*, Evolution of Maximum Contact Stresses in Amorphous Carbon Coated Silicon during Sliding 

      Wear  against Si3N4  Ball,  ASME,Trans., Journal of Tribology, 135 (2013) 021401-10. (IF:1.213-JCR3)

(3)  Qi Zhang and Dongfeng Diao*, Potential of Graphene Layer Controlling NanoWear during C60 Intrusion by Molecular Dynamics Simulation,  

       Wear, 306 (2013)248-453.(IF: 1.262-JCR2)

(2) Chao Wang and  Dongfeng Diao*,  Magnetic Behavior of Graphen Sheets Embedded Carbon Film Induced by Graphen Nano Crystallite,  

      Appl. Phys. Lett. 102 (2013) 052402 .(IF3.844-JCR2)

(1)  Dongfeng Diao and Koji Kato, Wear and Wear Maps of Hard Coatings, Tribology of Polymeric Nanocomposites: Friction and Wear 

      of Bulk Materials and Coatings (2nd Edition), Elsevier B.V., 2013, Page 387-403.

=2010-2012=
(20)  Xue Fan, Kenji Nose, Dongfeng Diao*, Toyonobu Yoshida, Nanoindentation behaviors of amorphous carbon films containg nanocrystalline graphite
        Si3N4 Ball, ASME-Tribology, APRIL 2013, Vol.135/021401-1. 
        DOI10.1007/S115249-013-0129-7. 
(17)  Chao Wang, Dongfeng Diao*, Xue Fan, and Cheng Chen, Graphene Sheets Embedded Carbon Film Prepared by Electron Irradiation in Electron
       Cyclotron Resonance Plasma, Applied Physics Letters, 100(24):073224APL, 11-JUN-2012.
(16)  Dongfeng Diao and Koji Kato, Wear and Wear Maps of Hard CoatingsTribology of Polymeric Nanocomposites: Friction and Wear of Bulk Materials
        and Coatings(2nd Edition), Elsevier B.V.,  Chaper 11(2012) in press.  
(15)  Zhiru Yang, Dongfeng Diao* and Lei Yang, Numerical Analysis on Nanoparticles-Laden Gas Film Thrust Bearing,  CSME, Trans.,
        Journal of Mechanical Engineering, (2012) accepted.
(14)  Lei Yang, Dongfeng Diao* and Wenjing Zhan, Data Loss and Demagnetization of Perpendicular Magnetic Recording Disk under Sliding
        Contact,  Tribology Letters,  46 (2012)329-335.
(13)  Pengyu Zhang, Dongfeng Diao*, Zhanjiang Wang, Critical Maximum Contact Pressure for Yielding in Hard Coating Under Sliding Contact,  Rare Metal
        Materials and Engineering, 41(2012)239-242.
(12)  Lei Yang, Ke Mu, Wenjing Zhan, Dongfeng Diao*, Effect of Heat Source Sliding Contact on the CoPtCr-based Magnetic Recording Disk,  Rare Metal
        Materials and Engineering, 41(2012)128-131.
(11)  Qi Zhang, Dongfeng Diao*, Pei Li, Intrusion Simulation of a C60 Ball into Sliding Contact Space with Graphene Layered Surfaces, Rare Metal Materials
        and Engineering,  41(2012)132-135.
(10)  Xue Fan, Chao Wang, Lei Yang, Dongfeng Diao*,Co Filled Porous Anodic Alumina Film Fabricated on ECR-Al Film with Silicon Substrate,  Rare Metal
        Materials and Engineering, 41(2012)136-139.
(9)  Pengyu Zhang, Dongfeng Diao* and Z. J. Wang, Three-Dimensional Local Yield Maps of Hard Coating Under Sliding Contact,  ASME,Trans., Journal of
      Tribology , 134(2012) 021301.
(8)  Pei Li and Dongfeng Diao*, Molecular dynamics simulation of intrusion of a C60 molecule ball into sliding contact space,   Lubrication Science, 24-1
      (2012)1-10.
(7)  T.Tokoroyama, M. Kamiya, N. Umehara, C. Wang and Dongfeng Diao*,Influence of UV irradiation for low frictional performance of CNx
      coatings, Lubrication Science, 24-3 (2012)129-139.
(6)  Xue Fan, Dongfeng Diao*, Kai Wang, Chao Wang,
Multi-functional ECR plasma sputtering system for preparing amorphous carbon and Al-O-Si films,
      Surface & Coatings  Technology, 206 (2011) 1963-1970. 
(5)  Chao Wang, Dongfeng Diao*, Cross-linked graphene layer embedded carbon film prepared using electron irradiation in ECR plasma sputtering, Surface
      &  Coatings Technology, 206(2011)1899-1904.
(4)  Xue Fan and Dongfeng Diao*, Contact Mechanisms of Transfer Layered Surface During Sliding Wear of Amorphous Carbon Film, ASME,Trans.,
      Journal of Tribology, 133 (2011) 042301.
(3)  Wu Tonghai, Dongfeng Diao and Fang Liang, Abrasive Wear Mechanisms of Sand Particles Intruding into ATM Roller-Scraper Tribosystem, CSME,
      Trans., Journal of Mechanical Engineering, 24(2011) 905-910. 
(2) Weifeng Jiang and Dongfeng Diao*, The Critical Conditions for Tribo-Demagnetization of  Perpendicular Magnetic Recording Disk Under
     Sliding Contact, ASME,Trans., Journal of Tribology,Vol. 132, APRIL 2010.
(1) Fuxun Li, Dongfeng Diao* and Xue Fan,
The Critical Condition for Intrusion of A Steel Ball into Sliding Contact Space, Lubrication Science, Vol. 22,
      MAY 2010.

Top Three Highly Cited Papers in Surface Engineering&Tribology Areas
(1) X.Li, Dongfeng Diao and B. Bhushan, Fracture Mechanisms of Thin Amorphous Carbon Films in 
      Nanoindentation, Acta Materialia, Vol.45, No.11, pp. 4453-4461, 1997.  
 (Sci-Paper 120 citations)
(2) Dongfeng Diao, K.Kato and K.Hokkirigawa, Fracture Mechanisms of Ceramic Coatings in Indentation, 
      ASME, Trans., Journal of Tribology, Vol.116, No.4, pp.860-869, 1994.  (Sci-Paper 54 citations)
(3) Dongfeng Diao, K.Kato and K.Hayashi, The Maximum Tensile Stress on a Hard Coating under 
        Sliding Friction, Tribology International, Vol.27, No.4, pp.267-272, 1994. (Sci-Paper 35 citations)
      
Patents in Tribology& Surface Engineering Areas
(1) Dongfeng Diao and Li Pu-Xun, A Tribometer for Measuring the Spherical Particle into Contact Interface, Patent number: P200910021269.7, 2009.
(2) Dongfeng Diao and Jiang Wei-Feng, The Tribometer of Demagnetization of Magnetic Re­cording Disk, Patent number:  P200910021309.8, 2009.
(3) Dongfeng Diao, Zhang Li-Zhang, The Tribometer for Measuring Friction and Wear in Online, Patent number: P200910021407.1, 2009.
(4) Dongfeng Diao and Wang Kai, The Chamber Structure of ECR Plasma Sputtering, Patent number: P200910021522.9, 2009.
(5) Dongfeng Diao and Zhao Sha-Sha, The Tribometer for Measuring Magnetic Card-Head Wear Life, Patent number:P200910022065.5, 2009.
(6) Dongfeng Diao and Lifeng Wang, A Tribometer for Measuring the Stick-Slip of Contact Interface in Online, Patent number: ZL201020199263.7.
(7) Dongfeng Diao and Xinzhi Pei, A Small load Tribometer for Measuring Interface Strength, Patent number: ZL201020199266.0. 
(8) Dongfeng Diao and Wenhao Sun, A System for Simulating Nature Sand Dust Paticles Motion in Closed Chamber,  Patent number: ZL201020199264.1.

A. Papers in English Journals  
(1) Dongfeng Diao*, K.Kato and K.Hokkirigawa, Fracture Mechanisms of Ceramic Coatings in Indentation ASME, Trans., Journal of Tribology, Vol.116, No.4, pp.860-869, 1994.
(2) Dongfeng Diao* and K.Kato, Interface Yield Map of a Hard Coating under Sliding Contact, Thin Solid Films, Vol.245, pp.115-121, 1994.
(3) Dongfeng Diao*, K.Kato and K.Hayashi, The Maximum Tensile Stress on a Hard Coating under Sliding Friction, TRIBOLOGY INTERNATIONAL, Vol.27, No.4, pp.267-272, 1994.
(4) Dongfeng Diao* and K.Kato, Spalling Mechanism of Al2O3 Ceramic Coating Coated WC-Co Substrate under Sliding Contact, Thin Solid Films, Vol.245, pp.104-108, 1994.
(5) Dongfeng Diao* and Y.Sawaki, Fracture Mechanisms of Ceramic Coating during Wear, Thin Solid Films, Vol. 270, pp. 362-366, 1995.
(6) Dongfeng Diao*, Y.Sawaki and H.Suzuki, Effect of Interlayer on Maximum Contact Stresses of Hard Coating under Sliding Contact, Surface and Coatings Technology, Vol.86-87, pp.480-485, 1996.
(7) Dongfeng Diao*, Local Yield Map of Hard Coating with an Interlayer under Sliding Contact, Thin Solid Films, Vol. 290-291, pp.221-225, 1996.
(8)Dongfeng Diao*, X. Li and B. Bhushan, A Method on Fracture Toughness of Thin Films with Nanoindentation, Academic Journal of Shizuoka University, No.47, pp.1-10, 1996.
(9) X.Li, Dongfeng Diao* and B. Bhushan, Fracture Mechanisms of Thin Amorphous Carbon Films in Nanoindentation, Acta Materialia, Vol.45, No.11,pp. 4453-4461, 1997.
(10) S.Y.Yu, H. Ishii, K. Tohgo, T.C. Young and Dongfeng Diao*, Temperature Dependence of Sliding Wear Behavior in SiC Whiskers or SiC Particlate Reinforced 6061 Aluminum Alloy Composite, WEAR, Vol. 213, pp.21-28,1997.
(11) Dongfeng Diao*, Finite Element Analysis on Local Yield Map and Critical Maximum Contact Pressure for Yielding in Hard Coating with an Interlayer under Sliding Contact, Tribology International, Vol 32, No.1, pp.25-32,1999.
(12) Dongfeng Diao* and K.Ito, Local Yield Map and Elastic-Plastic Deformation Map of Hard Coating with Lubricative Particles under Sliding, Surface and Coatings Technology, Vol.115, pp.193-200, 1999.
(13) Cai Chang-long, Dongfeng Diao*, S.Miyake and T.Matsumoto, Influence of Bias on Properties of Carbon Film Deposited by MCECR plasma Sputtering Method, Transactions of Nonferrous Metals Society of China, Vol.14, No.2, pp.251-254, 2004.
(14) Changlong CAI, Dongfeng DIAO*, Weihong MA and Yixin Yan, Properties of Carbon Films by MCECR Plasma Sputtering, Vacuum, Vol.80, pp.939-943, 2006.  
(15) Xu JQ,Kousaka H,Umehara N, Dongfeng Diao*,  Plasma properties of a new surface-wave-sustained plasma source under the conditions of depositing DLC films, Surface and Coatings Technology, Vol.201 pp.4273-4277, 2006. 
(16) Liu JY and Dongfeng Diao*, Demagnetization map for textured magnetic layered disk in contact against head, Surface and Coatings Technology, Vol.201 pp.4273-4277, 2006. 
(17) Dongfeng Diao* and Akira Kandori , Finite element analysis of the effect of interfacial roughness and adhesion strength on local delamination of hard coating under sliding contact , Tribology International, Vol.39, pp.887-895, 2006.  
(18) WU Tong-hai and Dongfeng Diao*, Abrasive Wear Map of Polymer Tapes in Sand Dust Envirnment, Academic Journal of China Univ. of Mining & Tech. (English Edition), Vol.16, No.2, pp.1-5, 2006.
(19) WU Tong-hai and Dongfeng Diao*, Fractal Characteristics of Polymer Tapes Abraded by Sand Particles, Academic Journal of Xi’an Jiaotong University(English Edition), Vol.18, No.1, pp.17-20, 2006.
(20)Junqi Xu, Huiqing Fan, Hiroyuki Kousaka N. Umehara, Dongfeng Diao*, Growth and properties of hydrogen-free DLC films deposited by surface-wave-sustained plasma, Diamond and Related Materials, Vol.16 No.1, 2007.
(21) Dongfeng Diao* and Tonghai Wu, Tribology in Natual Sand Dust Environment, Tribology online, Vol.3, No.7, pp.370-375, 2008.
(22) JIANG Weifeng and Dongfeng Diao*, The Critical Conditions for Tribo-Demagnetization of Magnetic Disk under Sliding Contact, ASME, Trans., J.Tribology, VOl.132, p.021901, 2010.
(23) LI Pu-Xun and Dongfeng Diao*, Intrusion Mechanisms of Nano-particles into OPC-Blade Contact Interface, Lubrication Science, VOL.22, pp.195-205,  2010.
(24) Li Pei and Dongfeng Diao*"
Molecular dynamics simulation of intrusion of a C60 molecule ball into sliding contact space" , Lubrication Science(SCI), 24-1(2012)1-10.
(25) Wu Tonghai ,
Dongfeng DIAO* and Fang Liang, "
Abrasive Wear Mechanisms of Sand Particles Intruding into ATM Roller-scraper Tribosystem",  Chinese Journal of  Mechanical  Engineering(SCI),Vol. 24,aNo. 5,app. 913-916, 2011.

(26) Chao Wang and Dongfeng Diao*, Cross-linked graphene layer embedded carbon film prepared using electron irradiation in ECR plasma sputtering, Surface and

Coatings Technology(SCI), 206(2011)1899-1904.

(27) Xue Fan, Dongfeng Diao*, Kai Wang and Chao Wang, Multi-Functional ECR Plasma Sputtering System for Preparing Amorphous Carbon and Al-O-Si Films,

Surface and Coatings Technology(SCI), 206( 2011)1963-1970.

(28)Xue Fan and Dongfeng Diao*, Contact Mechanisms of Transfer Layered Surface During Sliding Wear of Amorphous Carbon Film, ASME, J.Tribology(SCI), Vol.133

(2011)042301.

(29) Pengyu Zhang, Dongfeng Diao* and Zhanjiang Wang, 3D-Local Yield Maps of Hard Coating under Sliding Contact, ASME, J.Tribology(SCI), 134( 2012)011301.

(30) Zhiru Yang and Dongfeng Diao*, "Numerical Analysis on Nanoparticles-Laden Gas Film Thrust Bearing", Chinese Journal of  Mechanical  Engineering(SCI),

accepted 2012.

(31) T. Tokoroyama, N.Umahara, Wang Chao and Dongfeng Diao* Influence of UV Irradiation for Low Frictional Performance of CNx Coatings, Lubrication Science

(SCI)24-3(2012)129-139

(32) Pengyu Zhang, Dongfeng Diao* and Zhanjiang Wang, Critical Maximum Contact Pressure in Hard Coating under Sliding Contact on Three-Dimensional Elastic Half

Space, Rare Metals Materials and Engineering(SCI), in press, Vol.41. 2012.

(33) Lei Yang, Ke Mu, Wenjing Zhang and Dongfeng Diao*,  Study on the Damage of Multilayer Thin Film Magnetic Recording Disk under Heat Source Sliding Contact,

Rare Metals Materials and Engineering(SCI), in press, Vol.41. 2012.

(34) Qi Zhang, Pei Li and  Dongfeng Diao*,  Intrusion Simulation of a C60 Ball into Sliding Contact Space with Graphene Layered Surfaces, Rare Metals Materials and

Engineering, in press(SCI), Vol.41. 2012.

(35) Xue Fan, Lei Yang, Chao Wang and Dongfeng Diao*, Porous Anodic Alumina Films Filling with Magnetic Co Fabricated on ECR-Al Film with Silicon Substrate,Rare

Metals Materials and Engineering(SCI), in press, Vol.41. 2012(36) Lei Yang, Dongfeng Diao* and Wenjing Zhan, Data Loss and Demagnetization of Perpendicular Magnetic Recording Disk under Sliding Contact,  Tribology Letters, 46(2012)329-335.
(37) Chao Wang, Dongfeng Diao*, Xue Fan, and Cheng Chen,
Graphene Sheets Embedded Carbon Film Prepared by Electron Irradiation in Electron Cyclotron Resonance Plasma, Applied Physics Letters, 100(24):073224APL, 11-JUN-2012.
(38) Zhiru Yang,
Dongfeng Diao* and Lei Yang, Numerical Analysis on Nanoparticles-Laden Gas Film Thrust Bearing, CSME, Trans., Journal of Mechanical Engineering, (2012) accepted.
(39) Qi Zhang and Dongfeng Diao*, Potential of Graphene Layer Controlling Nano-Wear during C60 Intrusion by Molecular Dynamics Simulation, 2012-5 submit for publication.
(40) Dongfeng Diao and Koji Kato,
Wear and Wear Maps of Hard Coatings, Tribology of Polymeric Nanocomposites: Friction and Wear of Bulk Materials and Coatings(2nd Edition), Elsevier B.V., Chapter 11(2012) in press.

Papers in Chinese Journals
(41) Dongfeng Diao, A Calculation Method of the Transformed and Finite Element Method Using in an Externally Pressurized Simple-Orifice Gas Bearing, Journal of Optical Machine, Vol.90, pp.63-70, 1986.
(42) WU Tong-hai, Dongfeng Diao and XIE You-bai, Study on the Dust Environment based on Tribology, J. Lubrication Engineering, No.6, November, pp. 49-51, 2004.
(43) Cai Changlong, Dongfeng Diao, Shoji Miyake and Matsumoto Takeshi, Influence of substrate bias on the properties of hard carbon films prepared by MCECR sputtering, Acta Photonica Sinica, Vol.34, No.5, pp.734-736, 2005. 
(44) Liu, Jinyi, Dongfeng Diao, Xie Youbai, Temperature of Hard Disk and Critical Condition for Heat-Induced Demagnetization in Head/Disk Continuous Sliding Contact, J. TRIBOLOGY, Vol.25, No.5, pp.451-455,2005.
(45) WU Tong-hai, Dongfeng Diao and XIE You-bai, Wear Characteristics of ATM Tribosystem in Sand Dust Environment, Wear Characteristics of ATM Tribosystem in Sand Dust Environment,  J. TRIBOLOGY, Vol.25, No.5, pp.466-469, 2005.
(46) Wu Tonhai, Dongfeng Diao and Xie Youbai, Sand dust abrasive wear behavior of two polymer tapes, Lubrication Engineering, No.1, January, pp. 11-13, 2006. 
(47) Xu,Junqi, Kousaka,Hiroyuki, Umehara Noritsugu and Dongfeng Diao, Diagnosis and properties of newly developed surface-wave-sustained plasma,  Journal of Vacuum Science and Technology, Vol. 26, pp. 214-218, 2006. 
(48) WU Tong-hai, Dongfeng Diao and XIE You-bai,   Fractal Characteristics of Abrasive Wear of PEN Tape in Sand Dust Environment, J. TRIBOLOGY, Vol.26, No.3, pp.279-282, 2006.
(49) Cai Changlong, Dongfeng Diao, Ma Weihong and Yan Yixin, Carbon films deposited by MCECR plasma sputtering, Vacuum, Vol 80, No. 9, pp. 939-943, 2006.
(50) Liu, Jinyi, Diao Dongfeng, XIE You-bai, Coupled Temperature-Displacement Finite Element Analysis of a Slider Sliding Contact with a Textured Disk Surface and the Critical Condition for Demagnetization, J. TRIBOLOGY, Vol.26,No.5, pp461-466, 2006.
(51) WU Tong-hai and Dongfeng Diao, Intrusion Map of Particle into Roller-Scraper Tribosystem, J. TRIBOLOGY, Vol.28, No.2, pp.1-5, 2008. 
       
B. Invited Speech(Keynote) in Surface Engineering&Tribology Areas
(1) K.Kato and Dongfeng Diao, Sliding Contact Mechanism of Hard Coating, ASME, 93 Winter Annual Meeting on  Manufacturing and Tribological Systems, New Orleans, USA, 1993.
(2) Dongfeng Diao,Tribo-Design of Coating/Substrate System, The 2nd International Symposium on High Performance of Tribosystem, Taegu, Korea, 1999.
(3) Dongfeng Diao, Nanocoatings Tribology, 3rd International Conference on Surface Engineering, Chengdu, China, 2002.
(4) Dongfeng Diao, Nanotribology of ECR-Nano Carbon films, City University of HongKong, HongKong, 2004. 
(5) Dongfeng Diao, Contact Mechanics in Tribology of Nanocoatings, Proc.Inter. Forum on Coating nd Surface Engineering, Xian, China, 2005.
(6) Dongfeng Diao, Contact Mechanics in Tribology ofHard Coatings, International Tribology Conference, Kobe, Japan, 2005.
(7) Dongfeng Diao, Contact Mechanics in Tribology of Micro/Nano Hard Coatings, The 3rd Asia International Tribology Conference, Kanazawa, Japan, 2006.
(8) Dongfeng Diao, Design on Tape-scraper Tribosystem in Natual Sand Dust Environment, The 2rd International Symposium on High Performance of Tribosystem & Mechatronics, Teagu, Korea, 2006.
(9)Dongfeng Diao,Tribology in Natural Sand Dust Environment,2008-Autumn Tribology Conference Inernational Symposium Section,Nagoya,Japan,2008.
(10)Dongfeng Diao,New Solutions to New Problems-Tribology in Natuaral Sand Dust Environment,World Tribology Congress IV 2009,Kyoto,Japan,pp.584-584,2009
     
C-1. Peer-Reviewed International Conference in Surface Engineering&Tribology Areas
(1) Dongfeng Diao, K.Hokkirigawa and K.Kato, The Critical Loads for the Generation of Hertzian and Lateral Cracks in the Ceramic Coating Films,Proc. Int. Tribology Conf., Nagoya, Japan, pp.1-6, 1990.
(2) K.Kato, Dongfeng Diao and M.Tsutsumi, The Wear Mechanism of Ceramic Coating Film in Repeated Sliding Friction, ASME, Proc. Int. Conf. on Wear of Materials, pp. 243- 248, 1991.
(3) Dongfeng Diao, K.Kato and K.Hayashi, The Local Yield Map of Hard Coating under Sliding Contact, Thin Films in Tribology, Tribology Series 25, Elsevier Science Publisher, Edit. D.Dowson et.al., pp.419-427, 1993, Proc.19th Leeds-Lyon Symposium on Tribology, Leeds, UK, 1992.
(4) K.Kato and Dongfeng Diao, Sliding Contact Mechanism of Hard Coating, ASME’93 Winter Anuual Meeting on Contact Problems and Surface Interactions in Manufacturing and Tribological Systems, Edit. M.H.Attia & R. Komanduri, pp.243-248, 1993.
(5) Dongfeng Diao, Y.Sawaki and H.Kazuo, Critical Maximum Contact Pressure for the Generation of Yielding in the Hard Coating with an Interlayer under Sliding Contact , Proc. Inter. Tribology Conf., Yokohama, Japan, pp.31-36, 1995.
(6) Dongfeng Diao and Y.Sawaki, Fracture Mechanisms of Ceramic Coating during Wear, Proceeding of the 22nd International Conference on Metallurgical Coating and Thin Films, San Diego, California, U.S.A, pp.362-366,1995.
(7) Dongfeng Diao, Y. Sawaki and H.Suzuki, Effect of Interlayer on Maximum Contact Stresses of Hard Coating Under Sliding Contact, Proceeding of the 23rd International Conference on Metallurgical Coating and Thin Films, San Diego, California, U.S.A, pp.480-485, 1996.
(8) Dongfeng Diao, Local Yield Map of Hard Coating with an Inter Layer under Sliding Contact Proceeding of the 23rd International Conference on Metallurgical Coating and Thin Films, San Diego, California, U.S.A, pp.221-225, 1996.
(9) Dongfeng Diao and M.Oomura, A New Method for Estimating Wear Life of Thin Hard Coatings, Proceedings of The International Tribology Conference, Nagasaki, Japan, pp.937-942, 2000.
(10) Dongfeng Diao, F.Iwada, S.Hirono, S.Umemura and Y.B.Xie, Nanocoatings Tribology, 3rd International Conference on Surface Engineering, China, pp.77-81, 2002.
(11) Dongfeng Diao and Shoji Miyake, Tribology of Superhard Conductive Carbon Nanocrystallite Films by ECR Plasma Sputtering Method, International Conference on Novel Materials Processing by Advanced Electromagnetic Energy Sources, Elsevier Science Publisher, Edit. S.Miyake, Osaka, Japan, pp. 360-363, 2004.
(12) Cai Changlong, Mi Qian, Ma Weihong, Wu Lingling, Yan Yixin and Dongfeng Diao, Deposition Uniformity of Pulsed Vacuum Arc Ion Source,  International Conference on Novel Materials Processing by Advanced Electromagnetic Energy Sources, Elsevier Science Publisher, Edit. S.Miyake, Osaka, Japan, pp. 33-37, 2004.
(13) Cai Changlong, Mi Qian, Ma Weihong, Yan Yixin and Dongfeng Diao,New Method for Measuring Ion Energy in Pulsed Vacuum Arc, International Conference on Novel Materials Processing by Advanced Electromagnetic Energy Sources, Elsevier Science Publisher, Edit. S.Miyake, Osaka, Japan, pp.42-46, 2004.
(14) Dongfeng Diao and Shoji Miyake, Finite Element Analysis of Texture of Substrate Surface on Local Damage of Hard Coating under Sliding Contact, International Conference on Novel Materials Processing by Advanced Electromagnetic Energy Sources, Elsevier Science Publisher, Edit. S.Miyake, Osaka, Japan, pp.360-363, 2004.
(15) Wonghai Wu, Dongfeng Diao and Kazushi Yoshida, Wear Characteristics of Polymer Tapes on ATM Tape-Scraper Tribosystem in Dust Environment, Proceedings of WTC-2005,World Tribology Congres III, Washington, D.C., USA, pp.909-910, 2005.
(16) Jinyi Liu and Dongfeng Diao, Finite Element Analysis on Critical Conditions for Heat Induced Demagnetization in Head/Disk Sliding Conditions Contact, Proceedings of WTC-2005, World Tribology Congress III, Washington, D. C. , USA , pp. 687-688, 2005.
(17) Cai, CL, Dongfeng Diao, Ma, WH, et al., Properties of Carbon Films by MCECR Plasma Sputtering, The 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies, China, Vol.6149, pp.1490-1490, 2006.
(18) Xu, JQ; Kousaka, H; Umehara, N and Dongfeng Diao, Plasma properties of a new-type surface wave-sustained plasma source under the conditions of depositing DLC films, 20th Congress of the International-Commission-for-Optics, Changchun, China, Vol.6029, pp.L290-L290, 2006.
(19) Xu, JQ; Kousaka, H; Umehara, N and Dongfeng Diao, Effect of technique parameters on characteristics of hydrogen-free DLC films deposited by surface wave-sustained plasma, 20th Congress of the International-Commission-for-Optics, Changchun, China, Vol.6029, pp.P290-P290, 2006.
(20) Dongfeng Diao, New Solutions to New Problems-Tribology in Natural Sand Dust Environment, World Tribology Congress IV 2009, Kyoto, Japan, pp.584-584, 2009.
(21) Xue Fan, Dongfeng Diao, Yan Chen, Pengfei Wang, Tribological behavior of MCECR nano carbon-based films, World Tribology Congress IV 2009, Kyoto, Japan, , pp.444-444, 2009.
(22) Weifeng Jiang, Dongfeng Diao, The Critical Conditions for Tribo-Demagnetization of Magnetic Disk under Sliding Contact, World Tribology Congress IV, Kyoto, Japan, pp.774-774, 2009.
(23) Jianhua Chen and Dongfeng Diao, Finite Element Analysis on Effect of Surface Texture on Precise Positioning, World Tribology Congress IV, Kyoto, Japan , pp.199-199, 2009.
(24) Xue Fan, Kenji Nose, Makoto Kambara, Dongfeng Diao* and Toyonobu Yoshida, The dependence of mechanical properties on the nano structures of carbon films prepared by ECR and RF plasma sputtering. International Tribology Conference 2011, Hiroshima, Japan, October 30-November 3, 2011. 
(25) Zhiru Yang,
Dongfeng Diao*, Numerical Analysis of Pressure and Velocity Distribution in Nanoparticles-Laden Oil Flow of Clearance Seal, International Tribology Conference 2011, Hiroshima, Japan, October 30-November 3, 2011. 
(26) Qi Zhang, Pei Li,
Dongfeng Diao* Molecular Dynamics Simulation of Intrusion of a C60 Ball into Sliding Contact Space with Graphene Layered Surfaces, International Tribology Conference 2011, Hiroshima, Japan, October 30-November 3, 2011.
(27) Lei Yang,
Dongfeng Diao*, The Study on the Critical Conditions for Demagnetization and Data Loss in Perpendicular Magnetic Recording Disk, International Tribology Conference 2011, Hiroshima, Japan, October 30-November 3, 2011. 
(28) Pengyu Zhang,
Dongfeng Diao*, 3D-Local Yield Map of Hard Coating under Sliding Contact, International Tribology Conference 2011, Hiroshima, Japan, October 30-November 3, 2011
(29) Wenjing Zhan, Ke Mu, Dongfeng Diao*, Data Loss of Magnetic Disk under Heat Source Sliding Contact, International Tribology Conference 2011, Hiroshima, Japan, October 30-November 3, 2011. 
(30) Xue Fan and Dongfeng Diao*, Structure Effect on Mechanical Properties of ECR Plasma Sputtering Carbon Films, 6th China International Conference on Surface Engineering, Xian, China, May 10-13, 2011. 
(31) Chao Wang and Dongfeng Diao*, Nano Carbon Film with Embedded Graphene Layers Prepared under Electron Irradiation by ECR-PVD Method, 6th China International Conference on Surface Engineering, Xian, China, May 10-13, 2011. 
(32) Xue Fan and Dongfeng Diao*, Porous Anodic Alumina Films Filling with Magnetic Co Fabricated on ECR-Al Film with Silicon Substrate, 6th China International Conference on Surface Engineering, Xian, China, May 10-13, 2011. 
(33) Lei Yang, Wenjing Zhan and Dongfeng Diao*, Effect of Heat Source Sliding Contact on the CoPtCr-based Magnetic Recording Disk, 6th China International Conference on Surface Engineering, Xian, China, May 10-13, 2011. 
(34) Qi Zhang and Dongfeng Diao*, Intrusion Simulation of a C60 Ball into Sliding Contact Space with Graphene Layered, 6th China International Conference on Surface Engineering, Xian, China, May 10-13, 2011. 
(35) Pengyu Zhang and Dongfeng Diao*, Critical Maximum Contact Pressure in Hard Coating under Sliding Contact, 6th China International Conference on Surface Engineering, Xian, China, May 10-13, 2011. 
(36) Chao Wang and Dongfeng Diao*, Cross-linked graphene layer embedded carbon film prepared using electron irradiation in ECR plasma sputtering, 38th International Conference on Metallurgical Coatings and Thin Films, San Diego, USA, May 2-6, 2011
(37) Xue Fan, Dongfeng Diao*, Kai Wang and Chao Wang, MultiFunctional ECR Plasma Sputtering System for Preparing Amorphous Carbon and Al-O-Si films, 38th International Conference on Metallurgical Coatings and Thin Films, San Diego, USA, May 2-6, 2011.
(38) Dongfeng Diao, Y.Sawaki and H.Yoshida, Wear Mechanisms of Ceramic Coating under Sliding Contact, International Symposium on Applied Mechanics, Gyongsan, Korea, pp.71-76, 1994. 
(39) Y. Sawaki, Dongfeng Diao, H.Yoshida and A.Inoue, Fatigue Characteristic Stress Intensity Factors and Crack Propagation Curve, International Symposium on Applied Mechanics, Gyongsan, Korea, pp.122-127, 1994.
(40) Y.Sawaki, Dongfeng Diao, H.Yoshida and A.Inoue, Fatigue Characteristic Stress Intensity Factors at Low Temperature Proc. First International Symposium on Thermal Stresses and Related Topics, Hamamatsu, Japan, pp.501-504, 1995.
(41) Dongfeng Diao and Y.Sawaki, The Critical Thickness for the Generation of Buckling of Compressed Ceramic Coating, International Symposium on Applied Mechanics, Nagasaki, Japan, pp.65-70, 1995.
(42) Y. Sawaki, Dongfeng Diao, H.Yoshid and A.Inoue, Determination of Four Parameter Values in Weibull Function Used to Express Fatigue Cracking Behavior, International Symposium on Applied Mechanics, Nagasaki, Japan, pp.7-12, 1995.
(43) Y.Sawaki, S.Kumagai, H.Yoshida and Dongfeng Diao, Fatigue Characteristic Stress Intensity Factors and Crack Propagation in the Hardness Gradient Material, Symposium on Applied Mechanics Materials Science and Thermo-Fluids Engineering, Hamamatsu, Japan, pp.11-16, 1996.
(44) Y.Sawaki, H.Yoshida and H.Takemura and Dongfeng Diao, Shaping of Internal Geared Parts by Extrusion, Symposium on Applied Mechanics Materials Science and Thermo-Fluids Engineering, Hamamatsu, Japan, pp.107-112, 1996.
(45) Dongfeng Diao, Buckling formation of Thin Hard Coatings during Wear, Proceeding of the International Conference on Surface Engineering, Shanghai, China, pp.303-306, 1997.
(46) Dongfeng Diao, H.Suzuki, N.Asai and Y.Sawaki, Breakdown Mechanisms of Ceramic Coatings during Wear, The 24th International Conference on Metallurgical Coating and Thin Films, San Diego, California, U.S.A, p.222, 1997.
(47) Dongfeng Diao, Buckling Fromation of Ceramic Coatings during Wear, First Tribology Congress, London, UK, p.486, 1997.
(48) Dongfeng Diao and K.Ito, Local Yield Map of Hard Coating with Lubricative Particles under Sliding, Proceeding of Asian Tribology Conference, Beijing, China, pp.730-735,1998.
(49) Dongfeng Diao and K.Ito, Local Yield Map and Elastic-Plastic Deformation Map of Hard Coating with   Lubricative Particles under Sliding. The 25th International Conference on Metallurgical Coating and Thin Films, San Diego, California, U.S.A, p.136, 1998.
(50) Dongfeng Diao, Finite Element Analysis of the Effect of Roughness and Adhesion Strength of Interface on Coating Delamination, The 26th International Conference on Metallurgical Coating and Thin Films, San Diego, California, U.S.A, p.136, 1999.
(51)Dongfeng Diao, Tribo-Design of Coating/Substrate System, The 2nd International Symposium on High Performance of Tribosystem, Korea, pp.36-41, 1999.
(52) Tonghai Wu and Dongfeng Diao, Abrasive Wear Behavior of Polymer Tape by natural sand Particles, Proceeding of International Forum on Coating Painting and Surface Engineering, Xian, China, pp.125-127, 2005.
(53) Liu, Jinyi and Dongfeng Diao, Finite Element Analysis of Temperature Field of a Four-Layered Disk in Sliding Contact, Proceeding of International Forum on Coating Painting and Surface Engineering, Xian, China, pp.121-124, 2005.
(54) Dongfeng Diao, Tonghai Wu. Design on Roller-Scraper tribosystem in natural sand dust environment. The 8th Intertational Symposium on High Performance of Tribosystem & Mechatronics, Daegu, Korea, pp.14-25, 2006.
    
D. Publications in Japanese in Tribology&Mechanics Areas
(1) Dongfeng Diao, K.Hokkirigawa and K.Kato, Fracture Map of Ceramic Coatings In Indentation, JSLE Conf. pp.249-252, 1989. 
(2) Dongfeng Diao, K.Hokkirigawa and K.Kato, The Critical Loads for Generation of Lateral and Hertzian Cracks, JSLE Conf. pp.9-12,1989. 
(3) K.Kato, K.Hokkirigawa and Dongfeng Diao, Wear Mechanisam of Ceramic Coatings Observed by SEM-VTRTribosystem, JSLE Conf. pp.565-568, 1991. 
(4) Dongfeng Diao and K.Kato, The mechanism of Delamination of Ceramic Coatings under Sliding, JSLE Conf. , pp.83-86, 1991. 
(5) Dongfeng Diao, K.Hayashi and K.Kato, Maximum Tensile Stress of Ceramic Coatings under Sliding Contact, JSLE Conf. ,  pp.87-90, 1991. 
(6) Dongfeng Diao, K.Hokkirigawa and K.Kato, Local Yield Map of Ceramic Coatings in Sliding, JSLE Conf. pp.91-94, 1991. 
(7) Dongfeng Diao and K.Kato, The effect of parameters on local yield at the interface between coating and substrate in sliding friction, JSLE Conf. pp.235-238, 1993. 
(8) Dongfeng Diao, K.Kato and K.Hayashi, The Local Yield Map of Hard Coating under Sliding Contact , 5th Research Meeting of Tohoku University, pp.173-180, 1993. 
(9) Dongfeng Diao and K.Sawaki, Fracture Mechanisms of Ceramic Coatings in Indentation. 44th JSME Conf., pp.116-117,1995.
(10) Dongfeng Diao, K.Kato and K.Hayashi, Interface Yield Map of a Hard Coating under Sliding Contact, 7th Research Meeting of  Tohoku University, pp.267-272. 1995.
(11) H.Yoshida, Y.Sawaki, Dongfeng Diao, S.Mori and H.Takemura, Shaping of Eccentric Inner Helical Toothed Parts by Two-Step Method I , JSME Conf. pp.131-132, 1995  
(12) Y.Sawaki, H.Yoshida, S.Mori and Dongfeng Diao, Shaping of Internal Helical by Two-Step Cold Extrusion , JSME Conf. pp.193-132,1995  
(13) H.Yoshida, Y.Sawaki, Dongfeng Diao and H.Takemura: Shaping of Eccentric Inner Helical Gear by Cold Extrusion , JSME Conf. pp.195-196,1995. 
(14) Dongfeng Diao, K.Ito and K.Sawaki, Local Yield Map Hard Coating with Lubricative Particles under Sliding, JSME Conf. pp.104-105, 1997. 
(15) Dongfeng Diao, Nanoindentation and Microwear of Thin hard Coatings, Shizuoka University research report, Vol.2, pp.24-27,1996. 
(16) Y.Sawaki, H.Yoshida, H.Takemura, Dongfeng Diao and S.Mori, Shaping of Eccentric Inner Helical Toothed Parts by Two-Step Method II, JSME, Plasticity Processes Conf., pp.136-137,1996  
(17) Dongfeng Diao, H.Suzuki, M.Akira and Y.Sawaki, Study on Buckling Mechanisms of Ceramic Coating during Wear, JSME Conf ., pp.244-245, 1997. 
(18) Dongfeng Diao , X.Li , Bharat Bhushan, A Measured Method on Fracture Toughness of Thin Films with Nanoindentation, JSLE Conf., pp.275-278, 1997.
(19) Y.Sawaki, H.Yoshida, Y.Yishihara and Dongfeng Diao, Shaping of Helical Gear by Cold Extrusion I, JSME Conf., pp.98-99, 1997.
(20) Y.Sawaki, S. Kumagai, Dongfeng Diao, Y.Hajime, Effect of Closed Crack on Fatigue Crack Propagation in Hardness Gradient  Material, JSME Conf., pp.116-117, 1997.
(21) Y.Sawaki, H.Yoshida, M.Takemura, Dongfeng Diao, Shaping of Helical Gear by Two-Step Method II, JSME, Plasticity Processes Conf., pp.477-478,1997.
(22) Y.Sawaki, H.Yoshida,Y.Yishihara and Dongfeng Diao, Shaping of Helical Gear by Two-Step Method under Changing Modulus of  Materials, JSME Conf., pp.375-376,1997.
(23) H.Yoshida, Y.sawaki and Dongfeng Diao, Shaping of Eccentric Helical Gear by Two-Step Method, 48th JSME, Plasticity Processes Conf., pp.173-174,1997.
(24) H.Yoshida, Y.sawaki, T.Hajime and Dongfeng Diao, Shaping of Helical Gear by Cold Extrusion I, JSME Conf., JSME Conf. , pp.97-98,1997.
(25) H.Yoshida, Y.sawaki and Dongfeng Diao, Shaping of Helical Gear by Two-Step Method-effect of Materials, JSME Conf. , pp.377-378,1997.
(26) Dongfeng Diao and A. Asai ,Evaluation of Hard Coatings based on the Critical Conditions of Buclking ,JSLE Conf., pp.338-339, 1998.
(27) Dongfeng Diao, K.Akira and Xinghua Ye, Design on Interfacial Roughness of Coatings Basted on the Plastic Yield Conditions, JSLE Conf, pp.69-70, 1998.
(28) Dongfeng Diao, Friction and wear of Diamond like carbon coatings, JSME Conf., pp.177-178, 2000.
       
Appendix-I   Teaching at Shizuoka University, Japan(1994 to 2001)
(a) Lectures
    Mechanical Behavior of Materials for undergraduate students
    Tribology for Master courses students
    Nanotribology for Doctor courses students
(b) Supervisor of Graduated Master Students in Shizuoka University, Japan(1994 to2001)
(1) Suzuki, Study on Spalling Mechanism of Ceramic Coating in sliding, 1996.3
(2) Zhongjie Liu, Study on Micro-Tribology of Layered Magnetic Disk Sliding against to Head, 1997.3
(3) Asai, Study on the buckling mechanism of ceramic coating during friction and wear, 1997.3
(4) Inoue, Study on the behavior of magnetic fluid in thin film space, 1997.3
(5) Minami, Study on plastic yield and delamination of coated surface under sliding condition, 1997.3
(6) Hanzawa, Study on tribological behavior of DLC coatings, 1998.3
(7) Oomura, Study on friction and wear behavior DLC coatings under low load sliding condition, 1999.3
(8) Kantori, Study on 3D-Finite element analysis on local yield map of hard coating in sliding,1999.3
     
Appendix-II   Teaching at Xian Jiaotong Univeristy, China(2002-)
(a) Lectures
     Tribology for Master courses students
     Contact Mechanics for Doctor courses students
(b) Supervisor of Graduated Master Students in Xian Jiaotong Univeristy
(1) Dao-Peng Gan, Study on wear characteristics of ATM tribo-system in sand dust environment, 2006.06
(2) Peng-Fei Wang, Preparation and Tribological Properties of the Carbon Films Deposited with MCECR Plasma Sputtering Technique, 2007.03.
(3)Feng Lui, Research on Friction and Wear of Polyurethane in Dust Environment, 2007.03.
(4) Xiao-Feng Xu, Experimental and simulation study on flat-on-flat friction-induced vibration, 2007.06
(5) Yan Chen, Preparation and Tribological Properties of the CNx Films Deposited with MCECR Plasma Technique, 2008.06
(6)Hong-Gang Ji, Preparation and Tribological Properties of Diamond-like Carbon Films Deposited on High-carbon Chromium Bearing Steel Surface, 2008.06
(7) Wei-FEng Jiang, Research of the Critical Conditions for Tribo- demagnetization of Perpendicular Magnetic Re­cording Disk under Sliding Contact, 2009.06
(8) Pu-Xun Li, The intrusion mechanisms of spherical particle into OPC-Blade tribosystem, 2009.06
(9) Li-Zhang Zhang, Research on Friction and Wear Property of Rubber Roller’s Materials in ATM, 2009.06
(c) Supervisor of Graduated Ph.D Students in Xian Jiaotong Univeristy
(1) Tong-Hai Wu, Friction and Wear Mechanisms of Tape-Scraper Tribosystem in Sand Dust Environment, 2006.12
(2) Jin-Yi Liu, Simulations and Experiments of Critical Conditions for Demagnetization of Magnetic Disk Under Sliding Contact, 2006.12.
    
Appendix-III   Recent Research Projects
I . National Natural Science Foundation of China (NSFC)
 (1Preperation of ECR nano carbon films and the research on the tribological propertiesGrant number50475092
           2005.01--2007.12

 (2Study on Tribo-demagnetazation Behavior of A1203-Co Nanohole Patterned MediaGrant number50775173
           2008.1--2010.12

 (3Principle and methods for ECR nano surface extreme manufacuringGrant number909230272010.01--2012.12
II . National High-Tech Research and Develop Plan(863)
 (1Study on Developing and Application of ECR Plasma Sputtering nano Surface Machining SystemGrant number
          2007AA04Z3072007.10--2010.06

III . International Cooperation Research Project 
 
1Research on the Tribological Behavior of Information Mechanical SystemHItachi Mechanical Research Institute 
            http://www.hitachi.com/rd/
2003.04--2011.03

 
2Study on Tribo-demagnetazation Behavior of Magnetic Materials in Natural Sand/Dust EnvironmentHItachi 
           Mechanical Research Institute
2008.04--2011.03

 
3Research on the Tribological Behavior of Printing SystemRicoh Printing System http://www.rps.ricoh.co.jp/
           2005.09--2008.09

 
4Research on the Nano Sealing Properties of Precise Bearing System in Micro/Nano ParticleEnvironmen
         (NSK R&D Insititute  http://www.nsk.com/2005.03--2010.03

IV. International Foundation 
 
1Research on the On-Off Tribological Properties of Micro Rotor-Bearing System EMTAF Foundation of Japan 
           http://www.emtaf.or.jp/
2005.01--2007.01

 
2Contact Mechanism of Carbon Based MCECR-Nano Films with Nano-Textures and Nano-StructuresTTRF
           Foundation of America http://www.ttrf.org/
2009.01-2009.12