西安交通大学教师个人主页 范 学领

 

 2019:

 

1      Z.S. Mei, C.Y. Shi, X.B. Wang, X.L. Fan, Numerical Simulation of Hypersonic Reentry Flow Field with Gas-phase and Surface Chemistry Models, Materials Today Communications, 2019, 100773.

2     D.H. Chen, X.L. Fan, Z.P. Yin, Brittle failure of blunt V-shaped notch under mode I loading, Theoretical and Applied Fracture Mechanics, 2019.

3     关迪，范学领，肖滨，刘杰. 某型机载模块的随机振动疲劳分析.机械强度, 2019,41(1) : 66-71.

4     吕计男，郭力，范学领，陈刚，刘子强.大展弦比机翼翼段气动弹性效应下拓扑优化分析. 空气动力学学报, 2018, 36(6): 1047-1051.

5    Z.M. Xu, K.P. Meng, C.X. Yang, W.X. Zhang, X.L. Fan, Y.L. Sun. Elasto-plastic behaviour of transversely isotropic cellular materials with inner gas pressure. Metals 2019, 9, 901.

6    X.C. Jin, Y.L. Sun, C. Hou, X.B. Wang, G.Y. He, X.L. Fan, Investigation into cooling-rate dependent residual stresses in ZrB2–SiC composites using improved Raman spectroscopy method, Ceramics International. 2019. 

7     W.X. Zhang, H.M. Li, X.L. Fan, F. xie, Modelling of alloying process of cold sprayed Ni/Al coating, Mechanics of Materials, 2019.

8    X.J. Yan, X.C. Jin, P. Li, C. Hou, X. Hao, Z.G. Li, X.L. Fan, Microstructures and mechanical properties of ZrB2-SiC-Ni ceramic composites prepared by spark plasma sintering, Ceramics International, 2019.

9     B. Lv, R. Mücke, D.P. Zhou, X.L. Fan, T.J. Wang, O. Guillon, R. Vaßen, A constitutive model for the sintering of suspension plasma‐sprayed thermal barrier coating with vertical cracks, Journal of the American Ceramic Society. 2019. DOI: https://doi.org/10.1111/jace.16491.

10    D.H. Chen, X.L. Fan, Evaluation of the brittle failure of blunt U-shaped notch under mode I loading, Engineering Fracture Mechanics. 2019, 214:40-61.

11     X.K. Wang, X.L. Fan, Y.L. Sun, R. Xu. P. Jiang, Modelling and analysis of the oxide growth coupling behaviour of thermal barrier coatings, Journal of Materials Science. 2019.

12      P. Li, X. Jin, C. Hou, H. Li, X. Yan, M. Yuan, X. Fan, Cyclic thermal shock behaviours of ZrB2-SiC ultra-high temperature ceramics joints bonded with Ni interlayer, Journal of Alloys and Compounds, 2019, 793:49-55.

13     B.W Wang and X.L. Fan, Ground Flutter Simulation Test Based on Reduced Order Modelling of Aerodynamics by CFD/CSD Coupling Method, International Journal of Applied Mechanics,2019. https://doi.org/10.1142/S175882511950008X

14     X.C. Jin, P. Li, C. Hou, X.B. Wang, X.L. Fan*, C.S. Lu, G.S. Xiao, X.F. Shu, Oxidation behaviors of ZrB2 based ultra-high temperature ceramics under compressive stress, Ceramics International, 2019.

15     C. Hou, X.C. Jin, X.L. Fan*, R. Xu*, Z.Y. Wang, A generalized maximum energy release rate criterion for mixed mode fracture analysis of brittle and quasi-brittle materials, Theoretical and Applied Fracture Mechanics, 2019, 100: 78-85.

16     X.C. Jin, C. Hou, C.L. Li, X.B. Wang, X.L. Fan*, Strain rate effect on mechanical properties of 3D needle-punched C/C composites at different temperatures. Composites Part B, 2019,160:140-146.

 

  

2011-2018:

 

17      范学领，李定骏，吕伯文，方宇，赵世全，张伟旭，王铁军。国之重器，十载砥砺—重型燃气轮机制造基础研究进展，中国基础科学，2018，2：32-40.

18      B. Li, X.L. Fan*, H. Okada, T.J. Wang*, Mechanisms governing the failure modes of dense vertically cracked thermal barrier coatings. Engineering Fracture Mechanics, 2018, 189: 451-480.

19       B. Li, X.L. Fan*, T.J. Wang, K. Zhou*, Interfacial fracture behavior of double-ceramic-layer thermal barrier coating system with segmented structure, Engineering Fracture Mechanics, 2018, 201: 13-28.

20     P. Li, X.C. Jin, C. Hou, X.B. Wang, M.N. Yuan*, X.L. Fan*, Cyclic ablation behaviors of ZrB2-SiC composites sintered with nano-sized particles, Advanced Engineering Materials, 2018, DOI: 10.1002/adem.201800551.

21    Y. Chen, X.L. Fan*, Y.L. Sun*, W.X. Zhang. Effect of tensile load on high temperature oxidation of CoNiCrAlY coating, Surface & Coatings Technology,2018,352:399-405.

22    B.V. Lv, R. Mückea, X.L. Fan,T.J. Wang,O. Guillon, R. Vaßena.Sintering resistance of advanced plasma-sprayed thermal barrier coatings with strain-tolerant microstructures. Journal of the European Ceramic Society. 2018 (38), 5092-5100 .

23     G.H. Zhang, X.L. Fan*, R. Xua, L.C. Su, T.J. Wang. Transient thermal stress due to the penetration of calcium-magnesium-alumino-silicate in EB-PVD thermal barrier coating system. Ceramics International. 2018, 44(11):12655-12663.

24   P. Jiang, X.L. Fan, Y.L. Sun, H.T. Wang, L.C. Su, T.J. Wang. Thermal-cycle dependent residual stress within the crack-susceptible zone in thermal barrier coating system. Journal of the American Ceramic Society. 2018, 101: 4256-4261.

25   C.L. Li, X.L. Fan, P. Jiang, X.C. Jin, Delamination-indicating of atmosphere-plasma-sprayed thermal barrier coating system using Eu3+ luminescence mapping, Materials Letters. 2018, 222:41-44.

26  X.C. Jin, X.L. Fan*, C. Lu, T.J. Wang. Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites. Journal of the European Ceramic Society, 2018,38(1): 1-28.

27  P. Jiang, Xueling Fan*, Y.L. Sun, D.J. Li, T.J. Wang*. Bending-driven failure mechanism and modelling of double-ceramic-layer thermal barrier coating system, International Journal of Solids and Structures, 2018, 130-131:11-20.

28    X.C. Jin, C. Hou, X.L. Fan*, Y. Sun, J.N. Lv, C.S. Lu . Investigation on the static and dynamic behaviors of non-pneumatic tires with honeycomb spokes. Composite Structures, 2018, 187:27-35.

29       B. Li, X.L. Fan*, K. Zhou, T.J. Wang*. A semi-analytical model for predicting stress evolution in multilayer coating systems during thermal cycling. International Journal of Mechanical Sciences, 2018, 135：31-42.

30      Z. Duanmu, M. Yin, X.L. Fan* , et al. A patient-specific lumped-parameter model of coronary circulation. Scientific Reports, 2018, 8(1):874,DOI:10.1038/s41598-018-19164-w.

31  Xueling Fan, M.N. Yuan, Q. Qin. Failure mechanisms of Ti-Al3Ti metal-intermetallic laminate composites under high-speed impact.Rare Metal Materials and Engineering. 2018,47(9):2615-2620.

32    B.W. Lv, X.L. Fan, Y.L. Sun, T.J. Wang*.Towards enhanced sintering resistance: air-plasma-sprayed thermal barrier coating system with porosity gradient. Journal of the European Ceramic Society, 2018, 38(4):1946-1956.

33    Xueling Fan, M.D. Zhao, T.J. Wang*, An experimental investigation of the fatigue crack propagation in a closed-cell aluminum alloy foam. Materials Science Engineering. A, 2017, 708: 424-431.

34     X.C. Jin, C. Hou, X.L. Fan*, C.S.Lu, H.W Yang, X.F. Shu, Z.H. Wang. Quasi-static and dynamic experimental studies on the tensile strength and failure pattern of concrete and mortar discs. Scientific Reports,2017, 1700239.

35    B. Li, X.L. Fan*, K. Zhou, T. J. Wang*. Effect of oxide growth on the stress development in double-ceramic-layer thermal barrier coatings. Ceramics International, 2017, 43(17):14763-14774.

36    P. Jiang, X.L. Fan*, Y.L. Sun, D.J. Li, B. Li, T.J. Wang*. Competition mechanism of interfacial cracks in thermal barrier coating system. Material & Design, 2017, 132, 559-566.

37   X.C. Jin, X.L. Fan*,P. Jiang, Q. Wang. Microstructure evolution and ablation mechanism of C/C and C/C-SiC composites under a hypersonic flowing propane torch. Advanced Engineering Materials, 2017, 19(11): 1700239.

38    B. Li, X.L. Fan*, D.J. Li, P. Jiang. Design of thermal barrier coatings thickness for gas turbine blade based on finite element analysis. Mathematical Problems in Engineering, 2017: 2147830, 13 pages.

39   B.W. Lv, X.L. Fan*, H. Xie, T. J. Wang*. Effect of neck formation on the sintering of air-plasma-sprayed thermal barrier coating system. Journal of the European Ceramic Society, 2017,37(2):811–821.

40   J.N. Lv, X.L. Fan, Q. Li. The impact of the growth of thermally grown oxide layer on the propagation of surface cracks within thermal barrier coatings. Surface and Coatings Technology, 2017,309,1033-1044.

41   X.D. Zhang, H.X. Zong, L.S. Cui, X.L. Fan, X.D. Ding, J. Sun. Origin of high strength, low modulus superelasticity in nanowire-shape memory alloy composites. Scientific Reports,2017,7, 46360. doi:10.1038/srep46360.

42  Xueling Fan, Peng Jiang, Biao Li, Xiaochao Jin, Yong Zhao. Experimental and numerical evaluation of the ablation process of carbon/carbon composites using high velocity oxygen fuel system. Advances in Materials Science and Engineering, 2017,1543203, 7 pages.

43    Xiaochao Jin, Huawei Yang, Xueling Fan*, Zhihua Wang, Xuefeng Shu. Spherical and cylindrical cavity expansion models based prediction of penetration depths of concrete targets. PLoS ONE,2017,12(5): e0175785.

44     范学领，张光辉，江鹏。瞬态热载荷下热障涂层系统界面断裂研究。固体火箭技术，2017,40(6):765-769.

45     任晓雪，江鹏，范学领*，王铁军。La2Ce2O7/YSZ热障涂层抗热震性能的陶瓷层厚度影响研究。稀有金属材料与工程，待出版，2017.

46      王铁军，范学领，孙永乐，苏罗川，宋岩，吕伯文。重型燃气轮机高温透平叶片热障涂层系统中的应力和裂纹问题研究进展。固体力学学报，2016,37(6):477-517.

47      R. Xu, X.L. Fan, T.J. Wang. Mechanisms governing the interfacial delamination of thermal barrier coating system with double ceramic layers, Applied Surface Science, 2016, 370:394-402.

48    Modi Zhao, Xueling Fan, T.J. Wang*. Fatigue damage of closed-cell aluminum alloy foam: modeling and mechanisms, International Journal of Fatigue, 2016,87:257-265.

49      Bowen Lv, Hua Xie, Rong Xu, Xueling Fan, Weixu Zhang, T.J. Wang. Effects of sintering and mixed oxide growth on the interface cracking of air-plasma-sprayed thermal barrier coating system at high temperature. Applied Surface Science, 2016, 360: 461-469.

50     Xueling Fan. Surface crack and interfacial delamination in thermal barrier coating system. 2016 International Symposium on Frontiers in Applied Mechanics, 1–4 December, 2016, Melbourne, Australia.

51    Xueling Fan. Failure mechanisms of C/C and C/C-SiC composites under high-velocity oxygen-fuel ablation. The 10th International Conference on Fracture and Strength of Solids (FEOFS 2016), August 28th through September 1st in 2016,Tokyo, Japan.

52    Xueling Fan. Surface crack and interfacial delamination in thermal barrier coating system. 12th World Congress on Computational Mechanics (WCCM XII) and 6th Asia-Pacific Congress on Computational Mechanics (APCOM VI), 24 – 29 July, 2016, Seoul, Republic of Kore.

53  Modi Zhao, Xueling Fan*, Qingzhi Fang, T.J. Wang*. Experimental investigation of the fatigue of closed-cell aluminum alloy foam. Materials Letters, 2015,160:68-71. 

54   Zhimin Xu, Xueling Fan, Weixu Zhang, T.J. Wang*. Numerical analysis of anisotropic elasto-plastic deformation of porous materials with arbitrarily shaped pores.International Journal of Mechanical Sciences, 2015,96-97:121-131.    

55     Z. Jing, X.L. Fan*, Q. Sun. Stacking sequence optimization of composite laminates for maximum buckling load using permutation search algorithm. Composite Strucutres, 2015,121:225-236. 

56    Z. Jing, X.L. Fan*, Q. Sun. Global shared-layer blending method for stacking sequence optimization design and blending of composite structures. Composites Part B, 2015,69:181-190. 

57    Xueling Fan, Bowen Lv, Tiejun Wang. Effects of Sintering and Mixed Oxide Growth on the Interface Cracking of Air-Plasma-Sprayed Thermal Barrier Coating System at High Temperature. 2015 XJTU-TUS Joint Workshop on Applied Mechanics, Xi’an, 2015.10.

58    Dingjun Li, Xueling Fan, T.J.Wang. Investigation on water-droplet erosion resistance of coating for steam turbine blades. 7th Asian Thermal Spray Conference (ATSC2015), September 23-25, 2015, Xi’an, China.

59    范学领,许荣,王铁军.新型层级热障涂层失效机制. 中国力学大会,上海,2015.8.

60    R. Xu, X.L. Fan, W.X. Zhang, T.J. Wang. Interfacial fracture mechanism associated with mixed oxides growth in thermal barrier coating system. Surface and Coatings Technology,2014,253:139-147.

61   X.L. Fan, R. Xu, T.J. Wang. Interfacial delamination of double-ceramic-layer thermal barrier coating system. Ceramic International, 2014,40(9):13793-13802.

62    Y.J. Liu, Q. Sun, X.L. Fan*. A non–intrusive global/local algorithm with non-matching interface: Derivation and numerical validation. Computer Methods in Applied Mechanics and Engineering.2014,277,81-103. 

63    X.L. Fan, W. Jiang, J.G. Li, T. Suo, T.J. Wang, R. Xu. Numerical study on the interfacial delamination of thermal barrier coatings with multiple separations. Surface and Coatings Technology,2014,244,117-122.

64     Xueling Fan, Wenjun Qin, Tao Suo. An experimental investigation on the tensile strength of composite laminates containing open and filled holes. Strength of Materials, 2014,46(2),270-274.

65    X.L. Fan, R. Xu, M. Kikuchi. Fracture of thermal barrier coating with multiple surface cracks and delaminations: Interlayer effect. Journal of Central South University, 2014,12,2579-2583.

66   Q. Sun, H.N. Dui, X.L. Fan. A statistically consistent fatigue damage model based on Miner’s rule. International Journal of Fatigue,2014,69,16-21.

67    Z.B. Tang, T. SUO, B.S. Zhang, Y.L. Li, F. Zhao, X.L. Fan. Uniaxial compressive behavior of equal channel angular pressing Al at wide temperature and strain rate range. Transactions of Nonferrous Metals Society of China, 2014 (24): 2447-2452.

68   Xueling Fan, Rong Xu, Weixu Zhang, Tiejun Wang. Surface cracking and its influence on interface delamination in thermal barrier coating system. The 51th Society of Engineering Science (SES) Annual Technical Meeting. 1-3 October 2014, West Lafayette, IN, USA. 

69     Xueling Fan, Rong Xu, Weixu Zhang, Tiejun Wang, Masanori Kikuchi. Surface and interface cracks in thermal barrier coating system.2014 SKKU-TUS Mehcanical Engineering Workshop. 22-25 May 2014, Seoul, Korea

70  X.L. Fan, T.J. Wang, M. Kikuchi.On the interfacial degradation in thermal barrier coating with multiple interface separations.Computational Engineering and Science for Safety and Environmental Problems (COMPSAFE2014), 13-16 April 2014, Sendai, Japan

71     T. Suo, X.L. Fan, G.L. Xu, Y.L. Li, Z.B. Tang, P. Xu. Compressive behavior of C/SiC composites over a wide range of strain rates and temperatures. Carbon, 2013, 62,481-492.

72    T. Suo, L. Ming, F. Zhao, Y.L. Li, X.L. Fan. Temperature and strain rate sensitivity of ultrafine-grained copper under uniaxial compression. International Journal of Applied Mechanics,2013,15(2):1350016.        

73    Y.J. Liu, Q. Sun, X.L. Fan*, T. Suo. A stress-invariant based multi-parameters ductile progressive fracture model. Materials Science & Engineering A, 2013,576(1):337-345. 

74     Tao Suo, Yulong Li, Feng Zhao, Xueling Fan, Weiguo Guo. Compressive behavior and rate-controlling mechanisms of ultrafine grained copper over wide temperature and strain rate ranges. Mechanics of materials,2013, 61:1-10.

75     Tao Suo,Yuzeng Chen, Yulong Li, Cunxian Wang, Xueling Fan. Strain rate sensitivity and deformation kinetics of ECAPed aluminium over a wide range of strain rates. Materials Science & Engineering A, 2013,560: 545-551.

76     X.L. Fan, T. Suo, T.J. Wang. Dynamic mechanical behavior of 6061 Al alloy at elevated temperatures and high stain rates. Acta Mechanica Solida Sinica , 2013, 26 (2):111-120.

77    R. Xu, X.L. Fan, W.X. Zhang, Y. Song, T.J. Wang. Effects of geometrical and material parameters of top and bond coats on the interfacial fracture in thermal barrier coating system. Materials & Design,2013, 47:566–574.

78     刘超, 孙秦, 刘彦杰, 范学领.延性金属渐进破坏试验与数值研究,航空材料学报, 2013,33(1):93-99.

79    X.L. Fan, W.X. Zhang, M. Kikuchi, T.J. Wang.Influence of microstructure on multiple surface cracking behavior of film/substrate structure. The 5th Asia Pacific Congress on Computational Mechanics & 4th International Symposium on Computational Mechanics, 11-15 December, 2013, Singapore.

80    Xueling Fan, Wenjun Qin, Tao Suo. An experimental investigation on the tensile strength of composite laminates containing open and filled holes. The 2nd Global Conference on Materials Science and Engineering (CMSE 2013), Nov. 20-22, 2013, China.

81    X.L. Fan, R. Xu, T.J. Wang, M. Kikuchi. Surface cracking in thermal barrier coating system.The 2nd Student Seminar on Mechanical Engineering (SSME 2013), 10-13 November, Taiwan.

82     Rong Xu, Xueling Fan, Weixu Zhang, Tiejun Wang. Parametric studies of interfacial delamination in APS thermal barrier coating. The 2nd Student Seminar on Mechanical Engineering (SSME 2013), 10-13 November, Taiwan.

83     X.L. Fan, R. Xu, W.X. Zhang, T.J. Wang, M. Kikuchi.Interlayer constraint of thermal barrier coating with multiple surface cracks and delaminations. The 9th International Conference on Fracture & Strength of Solids (FEOFS), 9-13 June, Jeju Island, Korea, 2013.

84    Xu Rong, Zhang Weixu, Fan Xueling, Wang Tiejun. Effect of interfacial defect on surface crack behavior of an air plasma sprayed thermal barrier coating. The 13th International Conference on Fracture (ICF13), June 16-21, Beijing, China, 2013.

85     张伟旭, 范学领, 王铁军.热障涂层强度机理研究现状及展望.第十五届中国科协年会-先进能源开发装置中的关键力学问题研讨会, 贵阳, 2013.

86   X.L. Fan, W.X. Zhang, T.J. Wang, Q. Sun. The effect of thermally grown oxide on multiple surface cracking in air plasma sprayed thermal barrier coating system. Surface & Coatings Technology, 2012, 208:7-13.

87    X.L. Fan, R. Xu, W.X. Zhang, T.J. Wang. Effect of periodic surface cracks on the interfacial fracture of thermal barrier coating system. Applied Surface Science,2012, 258:9816-9823.

88   X.L. Fan, Q. Sun, Y.J. Liu.A modified ductile fracture model incorporating synergistic effects of pressure and Lode angle. International Journal of Applied Mechanics, 2012, 4 (2):1250022 (16 pages).

89  Y.J. Liu, Z. Li, Q. Sun, X.L. Fan*,W.Z. Wang. Separation dynamics of large scale fairing section: a fluid-structure interaction study. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2013,227(11), 1167-1779.

90     陈景昊,孙秦,范学领.基于共享铺层融合技术复合材料层压板铺层顺序优化设计,固体火箭技术, 2012,35(6):803-806.

91    田薇,孙秦,范学领.某型飞机前起舱段结构几何刚度分布优化设计.西北工业大学学报, 2012,30(6):857-861.

92     李哲,范学领,孙秦,万小朋.大型整流罩分离动力学简化建模及仿真分析.固体火箭技术,2012,32(5):583-587.

93     展全伟,范学领,徐红炉.复合材料加筋壁板稳定性影响分析.机械设计与制造, 2012,3:47-49.76

94    X.L. Fan, W.X. Zhang, T.J. Wang, G.W. Liu, J.H. Zhang. Investigation on periodic cracking of elastic film/substrate system by the extended finite element method. Applied Surface Science, 2011, 257(15):6718-6724.

95   W.X. Zhang, X.L. Fan, T.J. Wang. The surface cracking behavior in air plasma sprayed thermal barrier coating system incorporating interface roughness effect. Applied Surface Science, 2011, 258: 811-817.

96     X.L. Fan, Q.Sun, T.J. Wang. Damage evolution of sandwich composite structure using a progressive failure analysis methodology. Procedia Engineering, 2011, 10:530-535.

97     X.L. Fan, W.J. Qin. Stress distribution in the vicinity of thermally grown oxide of thermal barrier coatings. Advanced Material Research, 2011, 160-162: 721-725.

98     展全伟, 范学领, 孙秦.复合材料孔板在湿热环境下的力学性能研究.固体火箭技术,2011,34(6):764-767.

99     范学领, 孙秦.复合材料分层断裂判据及扩展准则研究.计算力学学报, 2011, 28(3): 1- 5.