代表性文章

[1] Niu,L.,Zhang,Q.,Ma,Y.,Chen,Y.,Han,B.,Huang,K.,2022.Multiscalemodelingofductilefracturebasedmoleculardynamicsandrepresentativevolumeelementinwarm-workingconditions.InternationalJournalofPlasticity.

[2] Niu,L.,Zhang,Q.,Han,B.,2022.MaterialcharacteristicsevaluationforDC04-weldedtubehydroforming.TheInternationalJournalofAdvancedManufacturingTechnology

[3] Niu,L.,Zhang,Q.,Wang,B.,Han,B.,Li,H.,Mei,T.,2021.AmodifiedHansel-SpittelconstitutiveequationofTi-6Al-4Vduringcoggingprocess.JournalofAlloysandCompounds.2022;894.doi:10.1016/j.jallcom.2021.162387

[4] Niu,L.,Zhang,Q.,2022.AvoidclosuremodelbasedonhydrostaticintegrationandtheLodeparameterforadditivemanufacturingAlSi10Mg.JournalofManufacturingProcesses.2022;73:235-247.doi:10.1016/j.jmapro.2021.10.056

[5]  Zhang, Q*, Niu L, Liang Z, Cao M, Zhou T. A porosity closure model considering stress triaxiality ratio and Lode stress parameter[J]. Journal of Materials Processing Technology 2020, 286.

[6]  Hao L, Zhang Q*, et al. Establishment of macro-micro constitutive model and deformation mechanism of semi-solid Al6061[J]. Journal of Alloys & Compounds, 2020, 854.

[7]  Niu L, Cao M, Liang Z, Han B, Zhang Q*. A modified Johnson-Cook model considering strain softening of A356 alloy[J]. Materials Science and Engineering: A 2020, 789.

[8]  Zhang Q*, Mei T, Zhang D, Cao M, Han B, Preparation of chemically etched surface texture and its friction characteristics in sheet forming[J]. Procedia Manufacturing, 2020, 50, 439-443.

[9]  M Cao*, JC Wang, Q Zhang*, K Huang. In situ observation of deformation-induced spherical grains in semi-Solid state of C5191 copper alloy [J]. Materials, 2020, 13 (5496): 1-11

[10]  M Cao*, Q Zhang, K Huang, XJ Wang, BT Chang, L Cai. Microstructural evolution and deformation behavior of copper alloy during rheoforging process [J]. Journal of materials science and technology, 2020, 42: 17-27.

[11]  Liang ZL, Zhang Q*. Microstructure and mechanical properties of A356 aluminum alloy prepared by casting combined with back extrusion [J]. Physics of Metals and Metallography, Accepted, 2018-9-3.

[12]  Liang ZL, Zhang Q*. Quasi-Static Loading Responses and Constitutive Modeling of Al–Si–Mg alloy [J]. Metals, 2018, 8(838): 1-11.

[13]  Liang ZL, Zhang Q*, Niu LQ, et al. Hot deformation behavior and processing maps of as-cast hypoeutectic Al-Si-Mg alloy [J]. Journal of Material Engineering and Performance, Accepted, 2019-6-28.

[14]Liang ZL, Zhang Q*. Mechanical Properties and Microstructures of A356 Alloy Prepared by Casting Combined with Forging [C]. Proceedings of the ASME 12TH International Manufacturing Science and Engineering Conference, Los Angeles, Jun 4-8, 2017.

[15]Liang ZL, Zhang Q*. Simulation and Experiment Research on Squeeze Casting Combined with Forging of Automobile Control Arm [C]. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Pittsburgh, Nov 9-15, 2018.

[16]Ben N Y, Zhang Q*, Meng D A, et al. Analysis of Real Contact Area and Re-lubrication in Oscillating Bulk Forming Process by Corrosion Method[J]. Journal of Materials Processing Technology, 2017, 253.

[17]Zhang Q*, Ben N Y, Yang K. Effect of variational friction and elastic deformation of die on oscillating cold forging for spline shaft[J]. Journal of Materials Processing Technology, 2017, 244:166-177.

[18]Cao M, Zhang Q*, Zhang Y. Effects of plastic energy on thixotropic microstructure of C5191 alloys during SIMA process[J]. Journal of Alloys & Compounds, 2017, 721.

[19]Cao M, Wang Z, Zhang Q*. Microstructure-dependent mechanical properties of semi-solid copper alloys[J]. Journal of Alloys & Compounds, 2017, 715.

[20]Q Zhang*, Z Liang, M Cao, et al. Microstructure and mechanical properties of Ti6Al4V alloy prepared by selective laser melting combined with precision forging [J]. Transactions of Nonferrous Metals Society of China, 2017, 27(5): 1036.

[21]Qi Z*, Zhang Y, Miao C, et al. Joining process for copper and aluminum tubes by rotary swaging method[J]. International Journal of Advanced Manufacturing Technology, 2016, 89(1):1-11.

[22]Zhang Q*, Cao M, Cai J. AlSi9Mg aluminum alloy semi-solid slurry preparation by intermediate frequency electromagnetic oscillation process[J]. Journal of Materials Processing Technology, 2015, 215(8):42-49.

[23]Zhang Q*, Wang Z R. Shape improvement of a dieless hydro-bulged sphere made of hexagonal and pentagonal shaped panels[J]. Journal of Materials Processing Technology, 2015, 220:87-95.

[24]Zhang Q*, Jin K, Mu D, et al. Energy-controlled rotary swaging process for tube workpiece[J]. International Journal of Advanced Manufacturing Technology, 2015, 80(9-12):2015-2026.

[25]Zhang Q*, Zhang C, Zhang M J, et al. Research of net-shape power spinning technology for poly-V grooved aluminum pulley[J]. International Journal of Advanced Manufacturing Technology, 2015, 81(9-12):1601-1618.

[26]王聚存,田天泰,张以升,彭谦之,曹苗,张琦. 航空发动机用薄壁细长轴旋锻校形工艺研究[J]. 塑性工程学报. 2020, 27(11)92-96

[27]徐宏图,张琦,罗伟,田天泰,,李文浩,王聚存. 轴类零件直线度检测系统研究[J]. 航空制造技术. 2020.

 

授权专利(均为第一发明人)

没有找到条目。
专利名称 申请号 专利类型 申请日期
一种台阶内孔大深径比轴的加工工艺 CN201510130470.4 发明 2020.01.01
一种大尺寸环类件的橡皮囊精密校形装置 CN201910645048.0 发明 2019.07.17
基于直接电阻加热技术的半固态金属增材制造设备及工艺 CN201910434321.5 发明 2019.05.23
一种PEEK材料螺杆压缩机转子锻轧复合成形装置及方法 CN201811567885.8 发明 2018.12.21
一种航空发动机法兰轴智能检测校形装置 CN201610812104.1 发明 2016.09.09
一种具有表面织构的楔形变模数多孔润滑花键轴挤压模具 CN201610186563.3 发明 2016.03.29
一种板材零件冲/焊一体化制造装置 CN201510320597.2 发明 2015.06.09
一种半固态坯料制备方法 CN201410830658.5 发明 2014.12.26
一种全电动微型压铸机 CN201310176165.X 发明 2013.05.14
一种深筒形件多次拉深装置 CN201210556319.3 发明 2012.12.20
一种汽车轮毂整体锻造的连铸连锻模具 CN201210380826.6 发明 2012.10.09
大型离心风机用叶轮盖盘的板材翻边镦粗弯曲热锻工艺 CN201210207997.9 发明 2012.06.22
一种平衡式高压大流量交流伺服直驱插装阀 CN201210164843.6 发明 2012.05.25
一种花键挤压成形设备 CN201210083919.2 发明 2012.03.27
一种纤维增强树脂基复合材料板热冲压成形装置及方法 CN201210044277.5 发明 2012.02.24
一种高压水射流板材微成形装置 CN201110435232.6 发明 2011.11.16
一种内螺纹管旋锻成形送料装置 CN201110054988.6 发明 2011.03.09
一种旋锻成形设备 CN201110054795.0 发明 2011.03.09
一种大吨位管材内高压成形装置 CN201110024626.2 发明 2011.01.21
一种厚壁管材内高压成形装置 CN201110002654.4 发明 2011.01.07