论文列表

2019年
  • 保持架打滑对航空发动机主轴承故障特征频率的影响  景新, 曹宏瑞, 陈雪峰 1000-8055
  • Xi, Songtao;Cao, Hongrui;Chen, Xuefeng Dynamic modeling of spindle bearing system and vibration response investigation  2019 114:486-511
  • Wang, Chenxi;Zhang, Xingwu;Yan, Ruqiang;Chen, Xuefeng;Cao, Hongrui Multi harmonic spindle speed variation for milling chatter suppression and parameters optimization 2019 55:268-274
  • Zhang, Xingwu;Wang, Chenxi;Liu, Jinxin;Yan, Ruqiang;Cao, Hongrui;Chen, Xuefeng Robust active control based milling chatter suppression with perturbation model via piezoelectric stack actuators 2019 120:808-835
  • Wang, Chenxi;Zhang, Xingwu;Liu, Jinxin;Yan, Ruqiang;Cao, Hongrui;Chen, Xuefeng Multi harmonic and random stiffness excitation for milling chatter suppression 2019 120:777-792
  • Shi, Jianghai;Cao, Hongrui;Jin, Xiaoliang Investigation on the static and dynamic characteristics of 3-DOF aerostatic thrust bearings with orifice restrictor 2019 138:435-449
  • He, Dong;Cao, Hongrui;Wang, Shibin;Chen, Xuefeng Time-reassigned synchrosqueezing transform: The algorithm and its applications in mechanical signal processing  2019 117:255-279
2018年
  • Cao H, He D, Xi S, et al. Vibration signal correction of unbalanced rotor due to angular speed fluctuation[J]. Mechanical Systems & Signal Processing, 2018, 107:202-220.
  • Wang C, Zhang X, Cao H, et al. Milling stability prediction and adaptive chatter suppression considering helix angle and bending[J]. International Journal of Advanced Manufacturing Technology, 2018(11):1-13.
  • Cao H, Yue Y, Chen X, et al. Chatter detection based on synchrosqueezing transform and statistical indicators in milling process[J]. International Journal of Advanced Manufacturing Technology, 2018, 95(1):1-12.
  • Cao H, Niu L, Xi S, et al. Mechanical model development of rolling bearing-rotor systems: A review[J]. Mechanical Systems & Signal Processing, 2018, 102:37-58.
  • Xi S, Cao H, Chen X, et al. A dynamic modeling approach for spindle bearing system supported by both angular contact ball bearing and floating displacement bearing[J]. Journal of Manufacturing Science and Engineering-transactions of the ASME, 2018, 140(2).
  • Guo W, Cao H R, Zi Y Y, et al. Material analysis of the fatigue mechanism of rollers in tapered roller bearings[J]. Science China Technological Sciences, 2018: 1-9.
  • Sierant J E. Reviewer's Recognition[J]. Journal of Thermal Science & Engineering Applications, 2018.
  • Wang C, Zhang X, Liu Y, et al. Stiffness variation method for milling chatter suppression via piezoelectric stack actuators[J]. International Journal of Machine Tools and Manufacture, 2018, 124: 53-66
2017年

  • Cao H, Zhou K, Chen X, et al. Early chatter detection in end milling based on multi-feature fusion and 3σ criterion[J]. The International Journal of Advanced Manufacturing Technology, 2017, 92(9-12): 4387-4397.
  • Cao H, Li D, Yue Y. Root Cause Identification of Machining Error Based on Statistical Process Control and Fault Diagnosis of Machine Tools[J]. Machines, 2017, 5(3): 20.
  • Niu L, Cao H, Xiong X. Dynamic modeling and vibration response simulations of angular contact ball bearings with ball defects considering the three-dimensional motion of balls[J]. Tribology International, 2017, 109: 26-39.
  • Cao H, Yue Y, Chen X, et al. Chatter detection in milling process based on synchrosqueezing transform of sound signals[J]. The International Journal of Advanced Manufacturing Technology, 2017, 89(9-12): 2747-2755.
  • Cao H, Riemer O, Brinksmeier E. Dynamic modelling and vibration simulation of air bearing spindle systems due to unbalance[J]. International Journal of Mechatronics and Manufacturing Systems, 2017, 10(3): 260-276.

  • Cao H, Dörgeloh T, Riemer O, et al. Adaptive separation of unbalance vibration in air bearing spindles[J]. Procedia CIRP, 2017, 62: 357-362.
  • Cao H, Zhang X, Chen X. The concept and progress of intelligent spindles: a review[J]. International Journal of Machine Tools and Manufacture, 2017, 112: 21-52.
2016年
  • H. Cao, X. Zhang, X. Chen, The concept and progress of intelligent spindles: A review, International Journal of Machine Tools and Manufacture, 112 (2017) 21-52.

  • 张兴武, 刘金鑫, 陈雪峰, 曹宏瑞, J. Liu, X. Chen, H. Cao, 基于神经网络的薄壳多目标振动优化控制研究, 机械工程学报, 52 (9) (2016) 56-64.

  • S. Xi, H. Cao, X. Chen, Zoom Synchrosqueezing Transform for Instantaneous Speed Estimation of High Speed Spindle, in: Materials Science Forum, 2016

  • L. Niu, H. Cao, Z. He, Y. Li, An investigation on the occurrence of stable cage whirl motions in ball bearings based on dynamic simulations, Tribology International, 103 (2016) 12-24.

  • S.X. Hongrui Cao, Xuefeng Chen, Shibin Wang, Zoom synchrosqueezing transform and iterative demodulation: Methods with application, Mechanical Systems and Signal Processing, 72b (2016).

  • H. Cao, Y. Li, X. Chen, A New Dynamic Model of Ball-Bearing Rotor Systems Based on Rigid Body Element, Journal of Manufacturing Science and Engineering, 138 (7) (2016) 071007-071007.

  • H. Cao, F. Fan, K. Zhou, Z. He, Wheel-bearing fault diagnosis of trains using empirical wavelet transform, Measurement, 82 (2016) 439-449.

2015年
  • 牛蔺楷, 曹宏瑞, 何正嘉, H. Cao, Z. He, 考虑三维运动和相对滑动的滚动球轴承局部表面损伤动力学建模研究, 机械工程学报, 51 (19) (2015) 53-59.

  • X. Zhang, B. Wang, H. Cao, B. Li, X. Chen, Operational Reliability Assessment of Compressor Gearboxes with Normalized Lifting Wavelet Entropy from Condition Monitoring Information, Entropy, 17 (5) (2015) 3479-3500.
  • C. Zhang, B. Li, B. Chen, H. Cao, Y. Zi, Z. He, Weak fault signature extraction of rotating machinery using flexible analytic wavelet transform, Mechanical Systems and Signal Processing, 64 (2015) 162-187.
  • S. Xi, H. Cao, X. Chen, X. Zhang, X. Jin, A frequency-shift synchrosqueezing method for instantaneous speed estimation of rotating machinery, Journal of Manufacturing Science and Engineering, 137 (3) (2015) 031012.
  • Z. Wan, H. Cao, Y. Zi, W. He, Y. Chen, Mesh stiffness calculation using an accumulated integral potential energy method and dynamic analysis of helical gears, Mechanism and Machine Theory, 92 (2015) 447-463.
  • C. Sun, Z. He, H. Cao, Z. Zhang, X. Chen, M.J. Zuo, A non-probabilistic metric derived from condition information for operational reliability assessment of aero-engines, IEEE Transactions on Reliability, 64 (1) (2015) 167-181.
  • L. Niu, H. Cao, Z. He, Y. Li, A systematic study of ball passing frequencies based on dynamic modeling of rolling ball bearings with localized surface defects, Journal of Sound and Vibration, 357 (2015) 207-232.
  • Y. Li, H. Cao, L. Niu, X. Jin, A General Method for the Dynamic Modeling of Ball Bearing–Rotor Systems, Journal of Manufacturing Science and Engineering, 137 (2) (2015) 021016.
  • Y. Li, H. Cao, X. Chen, Modelling and vibration analysis of machine tool spindle system with bearing defects, International Journal of Mechatronics and Manufacturing Systems, 8 (1-2) (2015) 33-48. 
  • W. Guo, H. Cao, Z. He, L. Yang, Fatigue Life Analysis of Rolling Bearings Based on Quasistatic Modeling, Shock and Vibration, 2015 (2015).
  • X. Chen, G. Cai, H. Cao, W. Xin, Condition assessment for automatic tool changer based on sparsity-enabled signal decomposition method, Mechatronics, 31 (2015) 50-59. 
  • H. Cao, K. Zhou, X. Chen, Chatter identification in end milling process based on EEMD and nonlinear dimensionless indicators, International Journal of Machine Tools and Manufacture, 92 (2015) 52-59.
  • H. Cao, K. Zhou, X. Chen, Stability-based selection of cutting parameters to increase material removal rate in high-speed machining process, in, SAGE Publications, 2015.
  • H. Cao, S. Xi, W. Cheng, Model Updating of Spindle Systems Based on the Identification of Joint Dynamics, Shock and Vibration, 2015 (2015).
  •  

2014年
  • Cao H*, Li Y, He Z, et al. (2014):Time varying bearing stiffness and vibration response analysis of high speed rolling bearing-rotor systems. Journal of Mechanical Engineering (In Chinese) (Published online)

  • Sun C. He Z*. Cao H, et al. (2014):A non-probabilistic metric derived from condition information for operational reliability assessment of aero-engine, IEEE Transaction on Reliability.(Published online)

  • Niu, L, Cao H*, He, Z, et al. (2014): Dynamic modeling and vibration response simulation for high speed rolling ball bearings with localized defects in raceways, Journal of Manufacturing Science and Engineering, Transactions of the ASME. http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1857510, (Published online).

  • Wan Z, Cao H, Zi Y*, et al. (2014): An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack. Engineering Failure Analysis, http://dx.doi.org/10.1016/j.engfailanal.2014.04.005 (Published online).

  • He Z, Cao H*, Zi Y, et al. (2014): Developments and thoughts on operational reliability assessment of mechanical equipment. Journal of Mechanical Engineering (In Chinese), 50(2): 171-186.

2013年
  •  Cao H, Li B, He Z. Finite element model updating of machine-tool spindle systems [J]. Journal of Vibration and Acoustics, Transactions of the ASME, 2013, 135(2):024503. .

  • Cao H, Lei Y, He Z. Chatter identification in end milling process using wavelet packets and Hilbert–Huang transform[J]. International Journal of Machine  Tools   and Manufacture, 2013, 69 (0): 11-19.

  •  Liu Z, Cao H, Chen X, et al. Multi-fault classification based on wavelet SVM with PSO algorithm to analyze vibration signals from rolling element bearings[J]. Neurocomputing, 2013, 99 (0): 399-410.

  • Li B, Jin W, Han L, Cao H, He Z. A spring dashpot model for dynamic analysis of beam-like structure with clearance[J]. Journal of Vibroengineering, 2013, 15 (3): 1490-1503.

  • Cao H, Li Y, He Z. Rolling bearing modeling with localized defects and vibration response simulation of a rotor-bearing system. The Ninth International Conference on VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY: Nanjing, 2013.

  • Li Y, Cao H, Zhu Y. Study on nonlinear stiffness of rolling ball bearing under varied operating conditions[C], Assembly and Manufacturing (ISAM), 2013 IEEE International Symposium on, Xi’an, 2013.

  • Niu L, Cao H, He Z. Dynamic Modeling and Vibration Response Simulation for Rolling Ball Bearings with Local Surface Defects. The Ninth International Conference on VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY: Nanjing, 2013.

  • Guo W, Cao H, He Z. Deterministic Life Models for Rolling Contact Fatigue:A Brief Review of Recent Trends. The Ninth International Conference on VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY:Nanjing, 2013. 

  • 曹宏瑞, 陈雪峰, 何正嘉. 主轴-切削交互过程建模与高速铣削参数优化[J]. 机械工程学报, 2013, 49 (5): 161-166.

  • 曹宏瑞, 何正嘉. 模型驱动的数字化加工过程状态监测与诊断[J]. 振动、测试与诊断, 2013, 33 (4): 550-554.

  • 万志国, 訾艳阳, 曹宏瑞, et al. 时变啮合刚度算法修正与齿根裂纹动力学建模[J]. 机械工程学报, 2013, 49 (11): 153-160.

  • 孙闯, 何正嘉, 张周锁, 陈雪峰, 曹宏瑞,宁喜钰,邹利民. 基于状态信息的航空发动机运行可靠性评估[J]. 机械工程学报, 2013, 49 (6): 30-37.

  • 何正嘉, 蔡改改, 申中杰, 曹宏瑞等. 基于机械诊断信息的设备运行可靠性研究[J]. 中国工程科学, 2013, (01): 9-14.

  • 牛蔺楷, 曹宏瑞, 何正嘉. 滚动轴承表面损伤建模与冲击力的定量计算[J]. 振动、测试与诊断, 2013, 33 (S1): 5-8. 

  • 汪友明, 吴青, 曹宏瑞. 一维算子自定义小波有限元的构造方法研究[J]. 应用力学学报, 2013, 30 (3): 445-450.

2012年
  • Cao H, Li B, He Z. Chatter stability of milling with speed-varying dynamics of spindles[J]. International Journal of Machine Tools & Manufacture, 2012, 52 (1): 50-58.

  • Cao H, Li B, He ZJ. A joint stiffness identification method based on finite element modeling and frequency response functions[J]. Journal of Vibroengineering, 2012, 14 (2): 611-620.

  • Cao H, Niu L, He Z. Method for Vibration Response Simulation and Sensor Placement Optimization of a Machine Tool Spindle System with a Bearing Defect[J]. Sensors, 2012, 12 (7): 8732-8754.

  • Cao H, Holkup T, Chen X, et al. Study on characteristic variations of high-speed spindles induced by centrifugal expansion deformations[J]. Journal of Vibroengineering, 2012, 14 (3): 1278-1291.

  • Zhang X, Chen X, He Z, Cao H. The multivariable finite elements based on B-spline wavelet on the interval for 1D structural mechanics[J]. Journal of Vibroengineering, 2012, 14 (1): 363-380. (SCI:913UJ)

  • 曹宏瑞, 何正嘉. 机床—主轴耦合系统动力学建模与模型修正[J]. 机械工程学报, 2012, (03): 88-94.

  • 曹宏瑞, 李兵, 陈雪峰, 何正嘉. 高速主轴离心膨胀及对轴承动态特性的影响. 机械工程学报, 2012, 48 (19): 59-64.

  • 曹宏瑞, 李兵, 何正嘉. 高速主轴动力学建模及高速效应分析[J]. 振动工程学报, 2012, 25 (2): 103-109.

  • 曹宏瑞, 何正嘉, 訾艳阳. 高速滚动轴承力学特性建模与损伤机理分析[J]. 振动与冲击, 2012, 31 (19): 134-140.

  • 曹宏瑞, 牛蔺楷, 何正嘉. 高速主轴轴承损伤建模与振动响应仿真研究[J].  振动与冲击, 2012, 31(S): 241-244.

  • 牛蔺楷, 曹宏瑞, 何正嘉. 滚动轴承表面损伤建模与冲击力的定量计算[C].第五届全国振动利用工程学术会议暨第四次全国超声电机技术研讨会 ,南京,2012年.
     

2011年
  • Cao H, Holkup T, Altintas Y. A comparative study on the dynamics of high speed spindles with respect to different preload mechanisms[J]. International Journal of Advanced Manufacturing Technology, 2011, 57 (9-12): 871-883.

  • Li B, Cao H, He Z. The construction of one-dimensional Daubechies wavelet-based finite elements for structural response analysis[J]. Journal of Vibroengineering, 2011, 13 (4): 729-738.

  • Chen B, He Z, Chen X, Cao H, et al. A demodulating approach based on local mean decomposition and its applications in mechanical fault diagnosis[J]. Measurement Science and Technology, 2011, 22 (5): 055704.

  • Chen B, Chen X, Li B, He Z, Cao H, et al. Reliability estimation for cutting tools based on logistic regression model using vibration signals[J]. Mechanical Systems and Signal Processing, 2011, 25 (7): 2526-2537.

  • Li B, Cao H, Yang Z. Thermal analysis of axial driving system for numerically controlled machine tool[C]. Xi‘an, China: Trans Tech Publications, 2011: 879-882.

  • Cao H, Li B, He ZJ. Study on modeling of digital machining process and its condition monitoring & diagnosis method[J]. Advanced Materials Research, 2011, 411: 622-625625.

  • 陈保家, 陈雪峰, 李兵,曹宏瑞等. Logistic回归模型在机床刀具可靠性评估中的应用[J]. 机械工程学报, 2011, 47 (18): 158-164.

  

2010年
  •  Holkup T, Cao H, Kolar P, et al. Thermo-mechanical model of spindles[J]. Cirp Annals-Manufacturing Technology, 2010, 59 (1): 365-368.

  • Cao H, Altintas Y, Holkup T. Modeling and comparison of high speed spindle systems with different bearing preload mechanisms. CIRP - 2nd International Conference, Process Machine Interactions: The University of British Columbia, Vancouver, Canada, 2010.

2009年
  • 陈雪峰, 曹宏瑞, 何正嘉. 数字化制造装备的主轴服役性能监测与诊断[J]. 机械工程学报, 2009, (05): 140-146.

  • He Z, Cao H, Li Z, et al. The principle of second generation wavelet for milling cutter breakage detection[J]. Science in China Series E-Technological Sciences, 2009, 52 (5): 1312-1322.

2008年
  • Chen X, Li B, Cao H, et al. The condition monitoring and performance evaluating of digital manufacturing process[C]. Wuhan, China: Springer Verlag,             2008: 593-603.

  • Cao H, Chen,Xuefeng, Zi Y, et al. End milling tool breakage detection using lifting scheme and Mahalanobis distance[J]. International Journal of Machine Tools and Manufacture, 2008, 48 (2): 141-151.

 

出版物
出版物 作者 出版日期 出版社
有限元方法及其工程案例 陈雪峰,李兵,曹宏瑞2014-07-01科学出版社
共有1条记录 共有1页面 每页面显示 条记录 页索引: 1 链接到第 页面