Prof. Ke Huang
Department of Mechanical Engineering
Xi'an Jiaotong University (XJTU)
Prof. Ke Huang
Department of Mechanical Engineering
Xi'an Jiaotong University (XJTU)
1) Editorial Member:
Metallurgical and Materials Transactions A,
Scientific Reports
Materials Science Technology
2) Scientific Committee member:
Thermec (International Conference on Processing & Manufacturing of Advanced Materials)
3) Reviewer of ~80 Sci journals (Including Science, Acta Mater etc)
Department of Mechanical Engineering
Xi'an Jiaotong University
No. 28 Xianning West Road
710049 Xi'an P.R. China
Prof. Huang (born 1983) received his doctorate degree in Material Science and Engineering in 2012 from CEMEF,Mines ParisTech, France. He joined the department of Material Science and Engineering, NTNU in March 2012 as a postdoctoral fellow. He was scientist at École polytechnique fédérale de Lausanne (EPFL), Switzerland from November 2014 to November 2017. Prof. Huang's main scientific interests include microstructural evolution during thermo-mechanical processing of metallic materials and its numerical modeling, as well as additive manufacturing. He became a professor at the department of mechanical engineering at XJTU since December 2017. His work has been published in prestigeous journals including Prog Mater Sci, Acta Mater, Int J Mach Tools Manuf, Addit Manuf, Int J Plasticity (Google Scholar citation >3400, H-index=25,2023 Stanford University Top 2% Scientists List),3 ESI highly cited papers.
1) Postdoc/Ph.D positions :
1) X.Z. Li, X.W. Fang, M.G. Zhang, H.K. Zhang,Y.S. Duan, K. Huang*. Gradient microstructure and prominent performance of wire-arc directed energy deposited magnesium alloy via laser shock peening. Int J Mach Tools Manuf, 188(2023) 104029
2) X.Z. Li, X.W. Fang, X. Jiang, Y.S. Duan, Y. Li, H.K. Zhang, X.P. Li, K. Huang*. Additively manufactured high-performance AZ91D magnesium alloys with excellent strength and ductility via nanoparticles reinforcement. Addit Manuf, 69(2023) 103550
3) X.Z. Li, M.G. Zhang, X.W. Fang, Z.X. Li, G.H. Jiao. K. Huang*. Improved strength-ductility synergy of directed energy deposited AZ31 magnesium alloy with cryogenic cooling mode. Virtual Phys Prototyp, 18(2023) e2170252
4) T. Chang, X. Fang, G. Liu, H. Zhang, K. Huang*, Wire and arc additive manufacturing of dissimilar 2319 and 5B06 aluminum. Journal of Materials Science & Technology 124(2022)65-75
5) N. Xi, K. Tang, X. Fang, Y. Li, Y. Duan, K. Huang*. Enhanced comprehensive properties of directed energy deposited Inconel 718 by a novel integrated deposition strategy. Journal of Materials Science & Technology, 141(2023)42-55 (ESI 高被引论文)
6) X. Fang, C. Ren, L. Zhang, C. Wang, K. Huang*, B. Lu*. A model of bead size based on the dynamic response of CMT-based wire and arc additive manufacturing process parameters. Rapid Prototyping Journal. 27(2021) 741-753
7) X.W. Fang, H. Li, X.G.Li, K. Huang*, L.J. Zhang*, B.H. Lu. Effect of post heat treatment on the microstructure and mechanical properties of wire-arc additively manufactured A357 alloy components. Mater Lett 269(2020)127674
8) X.W. Fang, L.J. Zhang, G.P. Chen, K. Huang*, F. Xue, L. Wang, J.Y. Zhao, B.H. Lu*. Microstructure evolution of wire-arc additively manufactured 2319 aluminum alloy with interlayer hammering. Mater Sci Eng A 800(2021)140168
9) Z. Chen, P. Wei, S.Z. Zhang, B.H. Lu*, L.J. Zhang*, X.G. Yang, K. Huang, Y. Z.Huang, X.P. Li, Q. L. Zhao. Graphene reinforced nickel-based superalloy composites fabricated by additive manufacturing. Mater Sci Eng A 769(2020)138484
10) X.W. Fang, L.J. Zhang, J.N. Yang, H. Bai, L. Zhao, K. Huang*, B.H. Lu*. Effect of characteristic substrate parameters on the deposition geometry of CMT additive manufactured Al-6.3%Cu alloy. Appl Therm Eng 162(2019) 114302
11) X. Fang, G. Chen, J. Yang, Y. Xie, K. Huang*, B. Lu. Wire and arc additive manufacturing of high strength Al-Zn-Mg aluminum alloy. Frontiers in Materials 8(2021) 656429
12) A. K. Sahu, S. Bag, Ke Huang. Mitigation of micro-cracks in dissimilar welding of Inconel 718 and austenitic stainless steel. Philo Mag Lett 100(2020)365-374
13) 黄科,方学伟,卢秉恒. 《锻压手册》第四版 第一卷 锻造,《增材制造》章节,2020年,机械工业出版社。
14) X. Fang, J. Yang, S.Wang, C. Wang, K. Huang*, H. Li, B. Lu. Additive manufacturing of high performance AZ31 magnesium alloy with full equiaxed grains: Microstructure, mechanical property, and electromechanical corrosion performance. J. Mater. Process. Technol 300(2022)117430
15) N. Xi, X. Fang, Y. Duan, Q. Zhang, K. Huang*, Wire arc additive manufacturing of Inconel 718: Constitutive modelling and its microstructure basis,Journal of Manufacturing Processes 75(2022)1134-1143
16) M. Zhang, X. Fang, Y. Wang, X. Jiang, T. Chang, N. Xi, K. Huang*, High superelasticity NiTi fabricated by cold metal transfer based wire arc additive manufacturing. Mater Sci Eng A 840 (2022) 143001
17)X.W. Fang, L.J. Zhang, G.P. Chen, X.F. Dang, K. Huang, L. Wang, B.H. Lu*. Correlations between microstructure characteristics and mechanicalproperties in 5183 aluminium alloy fabricated by wire-arc additivemanufacturing with different arc modes. Materials 11(2018) 207
18) 李新志,方学伟,常天行,冯成慧,黄科*. 选区激光熔化精密成形轻质镁合金的研究进展。精密成形工程.14(2022)78-93
19) X. Li, X. Fang, S. Wang, S. Wang, M. Zha, K. Huang*. Selective laser melted AZ91D magnesium alloy with superior balance of strength and ductility, Journal of Magnesium and Alloys, 2022 https://doi.org/10.1016/j.jma.2022.06.004
20) M. Zhang, Y. Duan, X. Fang*, H. Zhang, G. Jiao, Y. Li, K. Huang*, Tailoring the superelasticity of NiTi alloy fabricated by directed energy deposition through the variation of residual stress. Mater Des 224(2022)111311
21) Y.D. Jing, X.W. Fang, N.Y. Xi, X.L. Feng, K. Huang*. Investigation of microstructure and mechanical properties evolution in 7050 aluminum alloy and 316L stainless steel treated by laser shock peening. Mater Charact 182(2021)111571
22) Y.D. Jing, X.W. Fang, N.Y. Xi, T.X. Chang, Y.S. Duan, K. Huang*. Improved tensile strength and fatigue properties of wire-arc additively manufactured 2319 aluminum alloy by surface laser shock peening. Mater Sci Eng A 2023(864)144599
23) X.W. Fang, L.J. Zhang*, H. Li, C. Li, K. Huang, B.H. Lu. Microstructure evolution and mechanical behavior of 2219 aluminum alloys additively fabricated by cold metal transfer process. Materials 11(2018) 812
24) K. Huang*, T.X. Chang, Y.D. Jing, X.W. Fang, B.H. Lu. Additive Manufacturing of Magnesium Alloys. In "Additive and Subtractive Manufacturing", J. Paulo Davim (ed), De Gruyter, 2019. (Book Chapter)
25) G.H. Jiao, X.W. Fang, X.M. Chen*, N.Y. Xi, M. G. Zhang, Y. Liu, H.Y. Wu, K. Huang*. The origin of low thermal expansion coefficient and enhanced tensile properties of Invar alloy fabricated by Directed Energy Deposition. J Mater Process Technol, 317(2023) 117994
26) N. Kalentics*, K. Huang*, M. Ortega Varela de Seijas, A. Burn, V. Romano, R.E.Logé. Laser shock peening: a promising tool for tailoring metallic microstructures in selective laser melting. J. Mater. Process. Technol 266(2019)612-618
27) T.X. Chang, H.K. Zhang, X.W. Fang, Y.D. Jing, N.Y. Xi, K. Huang*. Tailoring precipitation of directed energy deposited Al-Cu alloy via laser shock peening. Addit Manuf, 73(2023) 103652
28)N. Xi, Z. Ni, X.W. Fang, Y. Zhou, K. Tang, H.K. Zhang, K. Huang*. Role of δ-phase on Mechanical Behaviors of Additive Manufactured Inconel 718: Detailed Microstructure Analysis and Crystal Plasticity Modelling. Int J Plasticity, 168(2023)103708
29) X.Z. Li, X.W. Fang, D.Q. Fang, W. Fu, X.R. Zhang, X.P. Li, K. Huang*. On the excellent strength-ductility synergy of wire-arc directed energy deposited Mg-Gd-Y-Zn-Zr alloy via manipulating precipitates. Addit Manuf, 69(2023) 103550 77(2023)103794
30) Y.D. Jing, X.W. Fang, Y.L. Geng, Y.S. Duan, K. Huang*. Simultaneous strength and ductility enhancement of wire-arc directed energy deposited Al–Cu alloy by interlayer laser shock peening. Mater Sci Eng A. 887(2023) 145699
31) Y. Zhou, T.X. Chang, X.W. Fang*, Y.K. Chen, Y.F. Li, K. Huang*. Tailoring the mechanical properties and thermal stability of additive manufactured micro-alloyed Al-Cu alloy via multi-stage heat treatment. Mater Des 233(2023)112287
32) X.W. Fang, J.N. Yang, X. Jiang, X.Z. Li, R.K. Chen, K. Huang*. Wire-arc directed energy deposited high-performance AZ31 magnesium alloy via a novel interlayer hammering treatment. Mater Sci Eng A. 889(2024) 145864
33) Y. Liu, X. Fang, X. Li, K. Huang*. The optimization of residual stress in arc bridge Hastelloy X components fabricated by Laser Powder Bed Fusion. Int J Adv Manuf Technol 129(2023) 4457–4471.
34) Z. Wu, S. Wu*, Y. Duan, K. Huang*, W. He, D. Du, A. Dong*. In situ X-ray tomography of fracture behaviour in low-porosity L-PBF AlSi10Mg alloy with laser shock peening. Virtual Phys Prototy. 18(2023)e2273955
35) X.Z. Li, X.W. Fang, M.G. Zhang, B.L. Wang, K. Huang*. Enhanced strength-ductility synergy of magnesium alloy fabricated by ultrasound assisted directed energy deposition. J Mater Sci & Technol 178C (2024) 247-261
36) M. Zhang, B.Wang, X. Li, G. Jiao, X. Fang, K. Huang*. Grain refinement of NiTi alloys during ultrasound-assisted wire-arc directed energy deposition. Virtual Phys Prototy. 19(2024)ee2289465
37) X.Z. Li, X.W. Fang, Z.Y. Zhang, S.Ghafoor, R.K. Chen, Y. Liu, K.X. Tang, K. Li, K. Huang*. Revealing precipitation behavior and mechanical response of wire-arc directed energy deposited Mg-Gd-Y-Zr alloy by tailoring aging procedures. Int J Extrem Manuf. Accepted
(2)Hot deformation
1) K. Huang*, R.E. Logé. A review of different dynamic recrystallization phenomena in metallic materials. Mater & Design 111 (2016) 548-574 (ESI 高被引文章)
2) K. Huang*, R.E. Logé. Microstructure and flow stress evolution during hot deformation of 304L stainless steel in variable conditions. Mater Sci Eng A 711(2018) 600-610
3) H.K. Zhang, H. Xiao, X.W. Fang, Q. Zhang, R.E. Logé, K. Huang*. A critical assessment of experimental investigation of dynamic recrystallization of metallic materials Mater & Design 193 (2020) 108873
4) K. Huang*. Editor.《Recrystallization: Types, Techniques and Applications》. 2020, Nova Publisher (Book)
5) O. Beltran, K. Huang*, R.E. Logé. A mean field model of dynamic and post-dynamic recrystallization predicting kinetics, grain size and flow stress. Comp. Mater. Sci 102 (2015) 293-303
6) P. Bernard, S. Bag, K.Huang, R.E.Logé*.A two-site mean field model of discontinuous dynamic recrystallization. Mater Sci Eng A 528(2011) 7357-7367
(3)Microstructure and properties control