Paper

1. Y.Arata, A.Ohmori and C.-J. Li, 1986, Basic study on properties of plasma sprayed ceramic coatings, Trans. Jpn. Weld. Res. Inst., Vol.15, pp.339-348.
2. Y.Arata, A.Ohmori and C.-J. Li, 1987, Characteristics of metal electroplating to plasma sprayed ceramic coatings, Trans. Jpn. Weld. Res. Inst., Vol.16, pp.259-265.
3. Y.Arata, A.Ohmori and C.-J. Li, 1988, Electrochemical method to evaluate the connected porosity in ceramic coatings, Thin Solid Films, Vol.156, pp.315-325.
4. 荒田吉明,大森明,李长久, 1988, アルミナ溶射皮膜の物性と构造,日本高温学会志,Vol.14, pp.220-233, (In Japanese).
5. Y.Arata, A.Ohmori and C.-J. Li, 1988, Fracture Behavior of plasma sprayed ceramic coatings in scratch test, Trans. Jpn. Weld. Res. Inst., Vol.17, pp.311-315.
6. 大森明,李长久, 荒田吉明,井上敬胜,岩本信也,1990, アルミナ溶射皮膜の贯通气孔率の皮膜构造依存性,(日本)高温学会志,Vol.16, (Supplement), pp.332-340, (In Japanese).
7. A.Ohmori, C.-J. Li and Y.Arata, 1990, Influence of plasma spray conditions on the structure of Al2O3 coatings, Trans. Jpn. Weld. Res. Inst., Vol.19, pp.259-270.
8. A.Ohmori and C.-J. Li, 1991, Quantitative characterization of the structure of plasma sprayed Al2O3 coating by using copper electroplating, Thin Solid Films, Vol.201, pp.241-252.
9. 谷和美,原田良夫,李长久,1995, WC-Co系溶射皮膜形成における粒子扁平化とその积层构造,日本金属学会志,Vol.59(No.11), pp.1130-1135 (In Japanese).
10. C.-J. Li, A.Ohmori and Y.Harada, 1996, Effect of powder structure on the structure of thermally sprayed WC-Co coatings, Journal of Materials Science, Vol.31, pp.785-794.
11. C.-J. Li, A.Ohmori and Y.Harada, 1996, Formation of an amorphous phase in thermally sprayed WC-Co, Journal of Thermal Spray Technology, Vol.5, pp.69-73.
12. C.-J. Li, and A.Ohmori, 1996, The lamellar structure of a detonation gun sprayed Al2O3 coating, Surface and Coating Technology, Vol.82, pp.254-258.
13. C.-J. Li, A.Ohmori and R.McPherson, 1997, Vol.32, pp.997-1004.
14. A.Ohmori, K.Yoshida and C.-J. LI, 1997, Characterization of graded Ti silicide coatings formed by thermal diffusion treatment of low pressure plasma sprayed silicon coating on titanium substrate, Trans. of Joining and Welding Research Institute, Vol.26 (No.2) pp.35-41.
15. 园家启嗣,李长久,纪岗昌,王豫跃,1998, 高速ガスフレ-ム溶射によるCr3C2-NiCr皮膜の物性に及ぼす溶射条件の影响,溶接学会論文集,Vol.16 (No.1), pp. 25-34.
16. A.Ohmori, N.Ohnishi, C.-J. LI and H.Shoyama, 1998, Characterization of the structure of plasma-sprayed metallic silicide coatings, Trans. of Joining and Welding Research Institute, Vol.27 (No.2), pp.47-52.
17. C.-J. Li, K. Sonoya, G.-C. Ji and Y.-Y Wang, 1998, Effect of spray conditions on the properties of HVOF Cr3C2-NiCr coatings, Welding in the World, Vol.41 No.2, pp.77-87.
18. C.-J. Li, A.Ohmori and K.Tani, 1999, Effect of WC particle size on the abrasive wear of thermally sprayed WC-Co coatings, Materials and Manufacturing Processes, Vol.14 (No.2), pp.175-184.
19. C.-J. Li, H.Yang and H.Li, 1999, Effect of gaseous conditions on the characteristics of HVOF flame and structure and property of WC-Co coatings, Materials and Manufacturing Processes, Vol.14 (No.3), pp.383-395.
20. C.-J. Li, K.Sonoya and F.-H.Li, 2000,Study of influence of plasma spray conditions on the mechanical properties of Ni-50%Cr coatings, by orthogonal experimental design, Welding In the World, Vol.44, No.3, pp.22-28.
21. K. Sonoya, C.-J. Li and F.-H. Li, 2001, Study of relationships between microstructure and mechanical properties of plasma-sprayed Ni-50Cr coatings and spray parameters, Quarterly Journal of Japan Welding Society, Vol.19(1) 27-36 In Japanese)
22. C.-J. Li, Y.Y. Wang, T. Wu and G.C. Ji, Effect of types of ceramic materials in aggregated powder on the adhesive strength of HVOF cermet coating, Surface & Coating Technology, Volume: 145, Issue: 1-3, August 1, 2001, pp. 113-120
23. C.-J. Li and A. Ohmori, Relationship between the structure and properties of thermally sprayed coatings, Journal of Thermal Spray Technology, Vol.11, No.3 (2002)365-374.
24. C.-J. Li and Y.-Y. Wang, Effect of particle state on the adhesive strength of HVOF sprayed metallic coating, Journal of Thermal Spray Technology, Vol.11(4)(2002)523-529.
25. C.-J. Li, G.-C. Ji, Y.-Y. Dominant effect of carbide rebounding on the carbon loss during high velocity oxy-fuel spraying of Cr3C2-NiCr, Thin Solid Films, Vol.419 (2002)137-143.
26. C.-J. Li, W.-Y. Li, Effect of sprayed powder particle size on the oxidation behavior of MCrAlY materials during HVOF deposition, Surface & Coating Technology, V.162 (2003)21-41.
27. C.-J. Li, W.-Y. Li, Deposition Characteristics of Titanium Coating in Cold Spraying, Surface & Coating Technology, Vol.167 No.2-3(2003)pp.278 – 283.
28. C.-J. Li, G.-J. Yang and Z. Wang, Formation of nano-structured TiO2 by flame spraying with liquid feedstock, Materials Letter, Vol.57(No.13-14), 2003, pp.2130-2134.
29. Keiji Sonoya, Chang-Jiu Li and Gang-Chang Ji, Relationship between the microstructure and properties of HVOF sprayed Cr3C2-NiCr coatings, Quarterly J. Japan Welding Society, 2003, Vol.21(No.1), 2003, pp.109-115 (In Japanese).
30. C.-J. Li, T. Wu and C.-X. Li, Effect of spray particle trajectories on the measurement signal of particle parameters based on thermal radiation, Journal of Thermal Spray Technology, Vol.12(1) ( 2003) 80-94.
31. C.-J. Li, W.-Z. Wang and Y. He, Measurement of fracture toughness of plasma-sprayed Al2O3 coatings using a tapered double beam method, J. Amer. Ceram. Soc., 2003, Vol.86 (8) 1437-39.
32. Chang-Jiu Li, Guan-Jun Yang and Akira Ohmori, Potential strengthening of erosion performance of plasma-sprayed Al2O3 coating by adhesives Impregnation, Journal of Materials Science Letters, Vol.22, 2003, 1499-1501.
33. Chang-Jiu Li and Bo Sun, Microstructure and Property of Al2O3 coating micro-plasma sprayed using a novel hollow cathode torch, Materials Letters, 2004,Vol 58/1-2 pp 179-183.
34.Chang-Jiu Li and Bo Sun, Effects of spray parameters on the microstructure and property of Al2O3 coatings sprayed by a low power plasma torch with a novel hollow cathode, Thin Solid Films, 2004, 450/2 pp. 282-289
35. Fuxing Ye, A Ohmori, Chang-Jiu Li, Formation of p-n junction by plasma spraying technique to enhance the photocatalytic activity of TiO2,Journal of Materials Science, Vol.39(2004) 353-355.
36. Chang-Jiu Li, Cheng-Xin Li and Xian-Jin Ning, Performance of YSZ Electrolyte Layer Deposited by Atmospheric Plasma Spraying for Cermet Supported Tubular SOFC, Vacuum, 2004, Vol 73/3-4 pp 699-703
37. Wei-Ze Wang, Chang-Jiu Li and Fu-Xing Ye, Effect of specimen geometry on fracture toughness measurement of plasma-sprayed ceramic coatings by the tapered double cantilever beam approach, Vacuum, 2004, Vol 73/3-4 pp 649-654
38. Chang-Jiu Li and Jing-long Li, Evaporated-gas-induced splashing model for splat formation during plasma spraying, Surface & Coatings Technology, 2004, Vol 184/1 pp 13-23.
39. F.-X Ye, A. Ohmori and C.-J. Li, New approach to enhance the photocatalytic activity of plasma sprayed TiO2 coatings using p-n junctions,Surface & Coatings Technology, 2004, Vol 184/2-3 pp 233-238.
40. Chang-Jiu Li and Bo Sun, Microstructure and Property of Micro-Plasma-Sprayed Cu Coating, Materials Science and Engineering A, 2004, Vol 379/1-2 pp 92-101
41. C.-J. Li and J.-L. Li; Transient contact pressure during flattening of thermal spray droplet and its effect on splat formation; Journal of Thermal Spray Technology, Vol.12(No.2) (2004) 229-238.
42. Guan-Jun Yang, Chang-Jiu Li, Fen Han, and Akira Ohmori, Microstructure and photocatalytic performance of HVOF sprayed TiO2 coatings, Thin Solid Films, 2004, Vol 466/1-2 pp 81-85.
43. Chang-Jiu Li, Wei-Ze Wang, Quantitative characterization of lamellar microstructure of plasma-sprayed alumina coating by visualization of Voids Distribution, Materials Science and Engineering A, 2004, Vol 386/1-2 pp 10-19.
44. Chang-Jiu Li, Yu-Yue Wang, Guan-Jun Yang, Akira Ohmori, K.A. Khor, Effect of solid carbide particle size on deposition behavior, microstructure and wear performance of HVOF cermet coatings, Materials Science and Technology, 2004. 20 (9): 1087-1096.
45. Chang-Jiu Li, Yu-Yue Wang, Hua Li, Effect of nano-crystallization of HVOF-sprayed NiCrBSi alloy on properties of coatings, J. Vaccum Sci. & Technol. A, 22(5)(2004)2000-2004.
46. Guan-Jun Yang, Chang-Jiu Li, Feng Han and Xin-Chun Huang, Effects of annealing treatment on microstructure and photo-catalytic performance of nanostructured TiO2 Coatings flame-sprayed with liquid feedstocks, J. Vaccum Sci. & Technol. B,22(5)(2004)2364-2368.
47. C.-J. Li, W.-Z. Wang and Y. He, Dependency of fracture toughness of plasma-spray Al2O3 coatings on the microstructure, J. Thermal Spray Technol., 2004, Vol.13(3)425-431.
48. LI Wen-ya, LI Chang-jiu, Optimization of spray conditions in cold spraying based on the numerical analysis of particle velocity, Trans. Nonferrous Met. Soc. China, 2004, Vol. 14, 43-48.
49. LI Chang-jiu, LI Wen-ya, Microstructure evolution of cold-sprayed coating during deposition and through post-spraying heat treatment, Trans. Nonferrous Met. Soc. China, 2004, Vol. 14,49-54.
50. YANG Guan-jun, LI Chang-jiu, WANG Yu-yue, Effect of substrate materials on the rutile crystalline orientation in plasma-sprayed TiO2 coatings, Trans. Nonferrous Met. Soc. China, 2004, Vol. 14, 62-66.
51. WANG Yu-yue, LI Chang-jiu, MA Jian, YANG Guan-jun, Effect of flame conditions on the abrasive wear performance of HVOF sprayed nanostructured WC-12Co coatings, Trans. Nonferrous Met. Soc. China, 2004, Vol. 14, 72-76.
52. C.-J. Li, H.-L. Liao. P. Gougen, G. Montovon, C. Coddet, Experimental determination of Relationship between flattening degree and Reynolds numbers for molten spray droplet, Surface & Coatings Technology, 2005, Vol 191/2-3 pp 375-383.
53. Chang-Jiu Li, Xian-Jin Ning and Cheng-Xin Li, Effect of Densification Process on the Properties of Plasma-Sprayed YSZ Electrolyte coatings for Solid Oxide Fuel Cell, Surface and Coatings Technology, Vol.190(2005)60-64.
54. Chang-Jiu Li,Cheng-Xin Li,Min Wang, Effect of Spray Parameters on the Electrical Conductivity of Plasma-Sprayed LA1-xSRxMnO3 coating for the cathode of SOFCs, Surface and Coatings Technology, Vol.198(2005)278-282.
55. Chang-Jiu Li, Wen-Ya Li, Yu-Yue Wang, Formation of metastable phases in cold-sprayed soft metallic deposit, Surface and Coatings Technology, Vol.198(2005)469-473.
56. Y.-Y. Wang, C.-J. Li, Effect of substrate surface conditions on the bonding mechanism of HVOF coatings, Thin Solid Films, Vol.485(2005)141-147.
57. Chang-Jiu Li, Wen-Ya Li, Yu-Yue Wang, Guan-Jun Yang, H. Fukanuma, A theoretical model for prediction of deposition efficiency in cold spraying, Thin Solid Films, Vol.489(2005) 79-85.
58. Wenya Li, Chang-Jiu Li, Optimal design of a novel cold spray gun nozzle at a limited space, Journal of Thermal Spray Technology, Vol.14(3)391-396.
59. Guan-Jun Yang, Chang-Jiu LI, Yu-Yue Wang, Phase Formation of Nano-TiO2 Particles during Flame Spraying with Liquid Feedstock, Journal of Thermal Spray Technology, Vol.14 (4) (2005)480-486.
60. Fu-Xing Ye, A. Ohmori, C.-J. Li, Photoresponse and donor concentration of plasma sprayed TiO2 and TiO2-ZnO electrodes, Journal of Thermal Spray Technology,Vol.14 (4) (2005)530-535.
61. Yu-Yue Wang,Chang-Jiu Li, Akira Ohmori, Examination of factors controlling bonding strength of HVOF sprayed coatings, Surface & Coatings Technology, Vol.200(2006)2923-2928.
62. Keiji Sonoya, Chang-Jiu Li, Wei-Ze, WangFracture toughness of plasma sprayed YSZ coatings Quarterly, Journal of Japan Welding Society, Vol.24 (2006) 65-69. (in Japanese)
63. Chang-Jiu Li, Guan-Jun Yang; Akira Ohmori, Relationship between particle erosion and lamellar microstructure for plasma sprayed alumina coatings, Wear, 260(2006)1166-1172
64. Wen-Ya Li, Chang-Jiu Li, Effect of annealing treatment on the microstructure and properties of cold-sprayed Cu coating, Journal of Thermal Spray Technology, Vol.15(2) (2006)206-211
65. Chang-Jiu Li, Wen-Ya Li, Examination of the critical velocity for deposition of particles in cold spraying, Journal of Thermal Spray Technology Vol.15(2) (2006)212-222
66. Xian-Jin Ning, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Effect of powder structure on microstructure and electrical properties of plasma-sprayed 4.5mol% YSZ coating, Vacuum, 80 (2006) 1261–1265
67. H. Li, S. Costil, H.-L. Liao, C.-J. Li, M. Planche, C. Coddet, Effects of surface conditions on the flattening behavior of plasma sprayed Cu splat, Surface Coating Technology, 200 (2006) 5435 – 5446
68. Gang-Chang Ji, Chang-Jiu Li, Yu-Yue Wang, Microstructural characterization and Abrasive wear performance of HVOF sprayed Cr3C2-NiCr coating, Surface & Coatings Technology, 200 (2006) 6749–6757
69. Wei-Ze Wang, Chang-Jiu Li, Yu-Yue Wang, Guan-Jun Yang, K. Sonoya, Elastic Behavior of Plasma-Sprayed Ni-Cr coatings, Surface & Coatings Technology, 201(2006) 842-847
70. Xian-jin Ning, Chang-jiu Li, Cheng-xin Li, Modification of microstructure and electrical conductivity of plasma-sprayed YSZ deposit through post-infiltration process Materials Science and Engineering A 428 (2006) 98–105
71. Chang-Jiu Li, Guan-Jun Yang, Yu-Yue Wang, Cheng-Xin Li, Phase formation during deposition of TiO2 coatings through high velocity oxy-fuel spraying, Mater. Trans. Vol.47 (7) (2006) 1690-1696
72. Cheng-Xin Li, Chang-Jiu Li, Min Gao, Wei Zhou, Guan-jun Yang, Yu-yue Wang, Characterization of the microstructure and electrical conductivity of plasma-sprayed La0.5Sr0.5CoO3 coating, Mater. Trans. Vol.47 (7) (2006) 1654-1657
73. Sheng-Qiang Fan, Chang-jiu Li, Cheng-Xin Li, Guang-Jian Liu, Guan-Jun Yang,Ling-Zi Zhang, Preliminary study of Performance of Dye-sensitized Solar Cell of nano-TiO2 Coating Deposited by Vacuum Cold Spraying, Mater. Trans. Vol.47 (7) (2006) 1703-1709
74. Wei-Ze Wang, Chang-Jiu Li, Yu-Yue Wang, Effect of spray distance on the mechanical properties of plasma sprayed Ni-Cr coatings, Mater. Trans. Vol.47 (7) (2006) 1643-1648
75. Y.-Y. Wang, C.-J. Li, K. Kusumoto, G.-J. Yang, Deposition Behaviors of Solid Phase in Liquid-Solid Two-Phase Particles in High Velocity Oxy-Fuel Spraying Mater. Trans. 47 (7) (2006) 1684-1689
76. Cheng-Xin Li, Chang-Jiu Li, Hui-Guo Long, Ya-Zhe Xing, Xin-Jin Ning, Chao Zhang, Han-Lin Liao, C. Coddet, Characterization of Atmospheric Plasma-Sprayed Sc2O3-ZrO2 electrolyte coating, Solid State Ionics, 177 (2006) 2149–2153
77. Chang-Jiu Li, Cheng-Xin Li, Ya-Zhe Xing, Min Gao, Guan-Jun Yang, Effect of YSZ electrolyte thickness on the characteristics of plasma-sprayed cermet supported tubular SOFC, Solid State Ionics, 177 (2006) 2065–2069
78. Wen-Ya Li, Hanlin Liao, Hong-Tao Wang, Chang-Jiu Li, Ga Zhang, C. Coddet, Optimal design of a convergent-barrel cold spray nozzle by numerical method, Applied Surface Science, 253(2006) 708-713
79. Wen-Ya Li, Hanlin Liao, Chang-Jiu Li, Gang Li, Christian Coddet, Xiaofang Wang, On high velocity impact of micro-sized metallic particles, Applied Surface Science, 253(2006) 2852-2862
80. Chang-Jiu Li, Cheng-Xin Li, Ya-Zhe Xing, Ying-Xin Xie, Hui-Guo Long, Influence of the characteristics of stabilized zirconia electrolyte on the performance of cermet supported tubular SOFCs, Rare Metals 25 (2006) 273-279.(special issue)
81. Sheng-Qiang Fan, Chang-Jiu Li, Guan-Jun Yang, Ling-Zi Zhang, Influence of TiCl4 Treatment on Performance of Dye-sensitized Solar Cell Assembled with Nano-TiO2 Coating Deposited by Vacuum Cold Spraying, Rare Metals, 25 (2006) 163-168 (special issue)
82. Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Yu-Yue Wang, Examination of Substrate Surface Melting-Induced Splashing during Splat Formation in Plasma Spraying, Journal of Thermal Spray Technology, 2006,15(4) 717-724
83. Sheng-Qiang, Fan, Guan-Jun Yang, Guang-Jian Liu, Cheng-Xin Li, Chang-jiu Li, Ling-Zi Zhang, Characterization of Microstructure of TiO2 Coating Deposited by Vacuum Cold Spraying, Journal of Thermal Spray Technology, 2006 15(4) 513-517
84. Wen-Ya Li, Hee-Seon Bang, Chang-Jiu Li, Hong-Tao Wang, Cheng-Xin Li, Measurement and numerical simulation of particle velocity in cold spraying, Journal of Thermal Spray Technology, 2006 15(4) 559-562
85. Guan-Jun Yang, Chang-Jiu Li, Cheng-Xin Li, Yu-Yue Wang, Xin-Chun Huang, Effect of metal ion doping on photocatalytic performance of liquid flame sprayed TiO2 coatings, Journal of Thermal Spray Technology, ?2006 15(4) 582-586
86. C. Zhang, H. Liao, C.-J. Li, W.-Y. Li, G. Zhang, C.-X. Li, X.-J. Ning, C. Coddet, Characterization of YSZ Electrolyte Deposit by Atmospheric Plasma Spraying and Low Pressure Plasma Spraying, Journal of Thermal Spray Technology, 2006 15(4) 598-603
87. Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Yu-Yue Wang, Examination of Substrate Surface Melting-Induced Splashing During Splat Formation in Plasma Spraying, Journal of Thermal Spray Technology, 2006, 15(4) 717-724