论文著作

 

期刊论文

 

                2018年

[1]      赵莹,解社娟,田明明,仝宗飞,李勇,陈振茂. 已知深度范围缺陷的选频带脉冲涡流检测方法.中国机械工程,201829(6)639-644(中文核心).

[2]      Haochen Liu , Shejuan Xie, Cuixiang Pei, Jinxing Qiu, Yong Li, Zhenmao Chen, Development of a Fast Numerical Simulator for Infrared Thermography Testing Signals of Delamination Defect in a Multilayered Plate[J]. IEEE Transactions on Industrial Informatics, 2018, PP(99):1-1.

[3]      Xudong Li, Shejuan Xie, Hongwei Yuan, Cuixiang Pei, Zhenmao Chen, An FEM-BEM method for halo current problem and its application to HL-2M Tokamak, Fusion Engineering and Design, 2018.

[4]    Xie Shejuan, Wu Lei, Tong Zhongfei, Chen Hongen, Chen Zhenmao*, Tetsuya Uchimoto, Toshiyuki Takagi, Influence of Plastic Deformation and Fatigue Damage on Electromagnetic Properties of 304 Austenitic Stainless Steel, IEEE Transactions on Magnetics, Vol. 54, no. 8, pp. 1-10, 2018 (SCI, doi: 10.1109/TMAG.2018.2819123)

[5]     Cherdppong JOMDECHA, Wenlu CAI, Shejuan XIE, Zhenmao CHEN*, Isaratat PHUNG-ON and Rungrueang PATTANAKUL, Fabrication of Imitative Stress-Corrosion Cracks for Electromagnetic NDE Using Synchrotron Deep X-ray Lithography and Powder Metallurgy Processing, Studies on Appl. Electromagn. Mech. Vol.43, 80-87, 2018.

[6]     李丽娟,解社娟,陈洪恩,陈玲莉,何曼如,陈振茂. 碳钢塑性变形对增量磁导率信号的影响分析.中国机械工程, 2018.

[7]     田明明,解社娟,裴翠祥,陈玲莉,陈振茂,基于小波分析的脉冲涡流/电磁超声复合无损检测方法,中国机械工程,2018.

[8]    Jingda Tang, Zongfei Tong, Yukun Xia, Ming Liu, Zengyao Lv, Yang Gao, Tongqing Lu, Shejuan Xie, Yongmao Pei*, Daining Fang and T. J. Wang*, Super tough magnetic hydrogels for remotely triggered shape morphing, Journal of Materials Chemistry B, vol. 6, pp. 2713–2722, 2018 (SCI).

 

                2017年

[1]       Kaiqiang Wang, Shejuan Xie, Hongwei Yuan, Weixin Li, Cuixiang Pei, Zhenmao Chen*, Yudong Pan, Lijun Cai, Jiaxian Li, Influence of Shield Plates on Electromagneto-Mechanical Dynamic Response of HL-2M Vacuum Vessel During Vertical Displacement Event, Compel, 36(6), 1759-1773, 2017.

[2]       Cherdpong Jomdecha, Wenlu Cai, Shejuan Xie, Zhenmao Chen*, Ghuangyi Zhu, Peng Li,A Numerical Study on Eddy Current Signal Characteristics of Imitative Stress Corrosion Cracks, Int. J. Appl. Electromagn. Mech., Vol.55, 257-269, 2017.

[3]       Yali Du, Shejuan Xie, Zhenmao Chen*, Guangyi Zhu and Peng Li, Detectability Evaluation of Eddy Current Testing Probes for Inspection of Defects in Carbon Fiber Reinforced Polymer Laminates, Int. J. Appl. Electromagn. Mech., Vol.55, 185-193, 2017.

[4]       Manru He, Zongfei Tong, Hong-En Chen, Shejuan Xie, Zhenmao Chen*, Simultaneous Evaluation of Residual Stress and Plastic Deformation in Ferromagnetic Steel by using an Integrated NDE Method, Int. J. Appl. Electromagn. Mech., Vol.55, S77–S85, 2017.

[5]      Xudong Li, Shejuan Xie, Hongwei Yuan, Zhenmao Chen*, Toshiyuki Takagi, A Research on Numerical Simulation of ACFM Signals for Nondestructive Inspection of Buried Pipes in Nuclear Power Plants,E-Journal of Advanced Maintenance, Vol.9-2, 104-111, 2017.

[6]     Shejuan Xie, Mingming Tian, Cuixiang Pei, Hong-En Chen, Zhenmao Chen, Toshiyuki Takag, Composite Defects Evaluation Using the Hybrid NDT Methods of PECT and EMAT, Stud. Appl. Electromagn. Mech., Vol.41, 139 – 149, 2017. 

[7]      Shejuan Xie, Mingming Tian, Pan Xiao, Cuixiang Pei, Zhenmao Chen, Toshiyuki Takagi, A hybrid nondestructive testing method of pulsed eddy current testing and electromagnetic acoustic transducer techniques for simultaneous surface and volumetric defects inspection, NDT&E International, vol. 86, pp. 153–163, 2017 (SCI).

[8]       Shejuan Xie, Mingming Tian, Hong-En Chen, Ying Zhao, Lei Wu, Zhenmao Chen, Tetsuya Uchimoto and Toshiyuki Takagi, Evaluation of wall thinning defect in magnetic material based on PECT method under magnetic saturation, International Journal of Applied Electromagnetics and Mechanics, 2017 (SCI, accepted, in press).

[9]       Wenlu Cai, Shejuan Xie, Cuixiang Pei, Cherdpong Jomdecha, Xiaojuan Wang, Yong Li, Noritaka Yusa, Zhenmao Chen, Assessment of local conductivity distribution in stress corrosion crack region using direct current potential drop method, Corrosion Science, 2017 (SCI, accepted, in press).

[10]      吴磊,解社娟,仝宗飞,王功起,陈洪恩,陈振茂,朱光艺,任国栋,基于塑性变形及疲劳损伤的304奥氏体不锈钢电磁特性的研究,应用力学学报, 2017, 34(5):842-847.

 


 

          2016年

[1]       Shejuan Xie, Beipei Fang, Wenlu Cai, Mingming Tian, Hong-En Chen, Zhenmao Chen, Sizing of defects in special shaped coolant pipe of tokamak magnet based on eddy current testing signals, International Journal of Applied Electromagnetics and Mechanics, vol. 52, no. 1-2, pp. 307-314, 2016 (SCI).

[2]       Haochen Liu, Shejuan Xie, Cuixiang Pei and Zhenmao Chen, Numerical simulation method for IR thermography NDE of delamination defect in multilayered plate, International Journal of Applied Electromagnetics and Mechanics, vol. 52, no. 1-2, pp. 381-389, 2016 (SCI).

[3]       Wenlu Cai, Zheng Xie, Shejuan Xie, Cuixiang Pei, Yong Li and Zhenmao Chen, Influence of the online closure loading on the eddy current testing signals of closed fatigue crack, International Journal of Applied Electromagnetics and Mechanics, vol. 52, no. 1-2, pp. 297-306, 2016 (SCI).

[4]       解社娟,马向锋,陈玲莉,赵莹,陈振茂,ITER包层脱粘缺陷的声发射检测,无损检测,vol. 38(10), pp. 1-5, 2016.

[5]       赵莹,解社娟,张东亮,田明明,吴磊,李勇,陈振茂, 脉冲涡流激励信号参数对检测能力的影响, 无损检测,vol. 38(10), pp. 14-17, 2016.

[6]   田明明,解社娟,肖盼,裴翠祥,李勇,陈振茂, 基于脉冲涡流/电磁超声复合检测方法的复杂缺陷检测, 无损检测,vol. 38(12), pp. 9-14, 2016.

 

            2015年

[1]       Shejuan Xie, Zhenmao Chen, Toshiyuki Takagi, Tetsuya Uchimoto, Quantitative Non-destructive Evaluation of Wall Thinning Defect in Double-layer Pipe of Nuclear Power Plants using Pulsed ECT Method, NDT&E International, Vol. 75, pp. 87-95, 2015 (SCI).

[2]       Shejuan Xie, Wenlu Cai, Mingming Tian, Lei Wu, Zhenmao Chen, Toshiyuki Takagi, Tetsuya Uchimoto, Numerical Method for Nonlinear Simulation of Magnetic Saturated Pulsed Eddy Current Testing Signals and Its Application to Evaluation of Wall Thinning in Carbon Steel Piping, Submitted to IEEE Transactions on Magnetics (2015, SCI).

[3]       Wenlu CAI, Shejuan XIE, Xiaojuan WANG, Cuixiang PEI, Yong LI, Zhenmao CHEN, Reconstruction of Conductivity Distribution of Stress Corrosion Crack from DC Potential Drop Signals, Submitted to IEEE Transactions on Magnetics (2015, SCI).

[4]       S. Xie, H. Chen, W. Cai, Z. Chen, T. Takagi, T. Uchimoto, K. Yoshihara, Feasibility Investigation of NDE for Plastic Deformation in Biaxial Specimen using PECT Method, Studies in Applied Electromagnetics and Mechanics, Vol. 40, pp. 43-50, 2015 (ISTP).

 

           Before 2015年

[1]       S. Xie, Z. Chen, H. Chen, S. Sato, T. Uchimoto, T. Takagi and Y. Yoshida, Evaluation of plastic deformation and characterization of electromagnetic property using pulsed eddy current testing method, International Journal of Applied Electromagnetics and Mechanics, Vol. 45, pp. 755-761, 2014 (SCI).

[2]       Shejuan Xie, Zhenmao Chen, Hong-En Chen, Xiaowei Wang, Toshiyuki Takagi* and Tetsuya Uchimoto, Sizing of wall thinning defects using pulsed eddy current testing signals based on a hybrid inverse analysis method, IEEE Transactions on Magnetics, Vol. 49, pp. 1653-1656, 2013 (SCI). 

[3]       Shejuan Xie, Yunfei Li, Wenlu Cai, Hong-En Chen, Zhenmao Chen*, Toshiyuki Takagi, Tetsuya Uchimoto and Yasuhiko Yoshida, A numerical method for simulation of nonlinear eddy current testing signals based on transient Ar formulation, Materials Transactions, Vol. 54, No.6, pp. 964-968, 2013 (SCI).

[4]       Shejuan Xie, Zhenmao Chen, Toshiyuki Takagi* and Tetsuya Uchimoto, Development of a very fast simulator for pulsed eddy current testing signals of local wall thinning, NDT & E International, Vol. 51, pp. 45-50, 2012 (SCI).

[5]       Shejuan Xie, Zhenmao Chen, Li Wang, Toshiyuki Takagi* and Tetsuya Uchimoto, An inversion scheme for sizing of wall thinning defect from pulsed eddy current testing signals, International Journal of Applied Electromagnetics and Mechanics, Vol. 39, pp. 203-211, 2012 (SCI).

[6]       Shejuan Xie, Zhenmao Chen, Toshiyuki Takagi* and Tetsuya Uchimoto, Efficient numerical solver for simulation of pulsed eddy current testing signals, IEEE Transactions on Magnetics, Vol. 47, pp. 4582-4591, 2011 (SCI).

[7]       Shejuan Xie, Toshiyuki Takagi* and Zhenmao Chen, Sizing of metallic foam bubble flaws using direct current potential drop signals with the help of the neural network method, International Journal of Applied Electromagnetics and Mechanics, Vol. 36, no. 4, pp. 339-353, 2011 (SCI).

 

[8]       Shejuan Xie, Zhenmao Chen and Toshiyuki Takagi, Development of a novel fast solver for the direct current potential drop method and its verification with nondestructive testing of metallic foam, International Journal of Applied Electromagnetics and Mechanics, Vol. 33 (2010), pp. 1253-1260, 2010 (SCI).

 

[9]       Xiaojuan Wang, Shejuan Xie, Zhenmao Chen*, An efficient numerical scheme for sizing of cavity defect in metallic foam from signals of DC potential drop method, IEEE Transactions on Magnetics, Vol. 50, No. 2, pp. 125-128, 2014 (SCI).

[10]     Xiaojuan Wang, Shejuan Xie, Yong Li, Zhenmao Chen*, Efficient numerical simulation of DC potential drop signals for application to NDT of metallic foam, The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 33, No. 1/2, pp. 147-156, 2014 (SCI).

[11]     Li Wang, Shejuan Xie, Zhenmao Chen*, Yong Li, Xiaowei Wang and Toshiyuki Takagi, Reconstruction of stress corrosion cracks using signals of pulsed eddy current testing, Nondestructive Testing and Evaluation, Vol. 28, pp. 145–154, 2013 (SCI).

[12]     Jing Zhang, Shejuan Xie, Xiaojuan Wang, Yong Li and Zhenmao Chen*, Quantitative non-destructive testing of metallic foam based on direct current potential drop method, IEEE Transactions on Magnetics, Vol. 48, pp. 375-378, 2012 (SCI).

[13]     Hong-En Chen, Shejuan Xie, Haiqiang Zhou, Zhenmao Chen*, Tetsuya Uchimoto, Toshiyuki Takagi and Yasuhiko Yoshida, Numerical simulation of magnetic incremental permeability for ferromagnetic material, International Journal of Applied Electromagnetics and Mechanics, Vol. 45, pp. 379-386, 2014 (SCI).

[14]     Wenlu Cai, Hong-En Chen, Shejuan Xie, Yong Li, Zhenmao Chen*, Tetsuya Uchimoto, Toshiyuki Takagi, Yasuhiko Yoshida, A study on influence of plastic deformation on the global conductivity and permeability of carbon steel, International Journal of Applied Electromagnetics and Mechanics, Vol. 45, pp. 371-378, 2014 (SCI).

[15]     H. Chen, S. Xie, Z. Chen, T. Takagi, T. Uchimoto, K. Yoshihara, Quantitative Nondestructive Evaluation of Plastic Deformation in Carbon Steel Based on Electromagnetic Methods, Materials Transactions, Vol. 55, No. 12, pp. 1806-1815, 2014 (SCI).

[16]     Shejuan Xie, Zhenmao Chen, Toshiyuki Takagi* and Tetsuya Uchimoto, Pulsed eddy current testing method for quantitative non-destructive evaluation of wall thinning defects, International Journal of Aerospace and Lightweight Structures, Vol. 3, No. 1, pp. 75–86, 2013.

[17]      S. Xie, Z. Chen, H. Zhou, W. Cai, T. Takagi, T. Uchimoto, G. Dobmann, Evaluation of Wall Thinning in Carbon Steel Piping Based on Magnetic Saturation Pulsed Eddy Current Testing Method, Studies in Applied Electromagnetics and Mechanics,Vol. 39, pp. 296-303, 2014 (ISTP).

[18]      S. Xie, Z. Chen, H. Chen, W. Cai, T. Takagi, T. Uchimoto, K. Yoshihara, Feasibility Investigation of NDE for Plastic Deformation in Biaxial Specimen using PECT Method, Studies in Applied Electromagnetics and Mechanics 2014 (ISTP, 已接收).

[19]      Shejuan Xie, Toshiyuki Takagi*, Tetsuya Uchimoto, Zhenmao Chen and Li Wang, Forward and inverse simulations of pipe wall thinning using pulsed eddy current signals, Studies in Applied Electromagnetics and Mechanics, Vol. 37, pp. 85-99, 2012 (ISTP).

[20]      Shejuan Xie, Toshiyuki Takagi*, Tetsuya Uchimoto and Zhenmao Chen, Quantitative non-destructive testing of local wall thinning defect based on an efficient simulator of pulsed eddy current testing signals, Studies in Applied Electromagnetics and Mechanics, Vol. 36, pp. 257-263, 2012 (ISTP).

[21]      Shejuan Xie, Toshihiro Yamamoto, Toshiyuki Takagi* and Tetsuya Uchimoto, Pulsed ECT method for evaluation of pipe wall-thinning of nuclear power plants using magnetic Sensor, Studies in Applied Electromagnetics and Mechanics, Vol. 35, pp. 203-210, 2011 (ISTP).

[22]      H. Chen, S. Xie, Z. Chen, T. Uchimoto, T. Takagi, K. Yoshihara, Evaluation of Plastic Deformation in an Austenitic Stainless Steel based on Nonlinear ECT Method, Studies in Applied Electromagnetics and Mechanics, Vol. 39, pp. 101-108, 2014 (ISTP).

 

 

会议论文

 

[1]       Shejuan Xie, Mingming Tian, Cuixiang Pei, Hong-En Chen, Zhenmao Chen, Composite defects evaluation using the hybrid NDT methods of PECT and EMAT, Proceedings of ENDE2016, pp. 143-144, 2016.

[2]       Shejuan Xie, Lei Wu, Zongfei Tong, Mingming Tian, Hong-En Chen, Zhenmao Chen, Tetsuya Uchimoto and Toshiyuki Takagi, Influence of plastic deformation and fatigue damage on electromagnetic properties of 304 austenitic stainless steel, Proceedings of 2DM2016, pp. 55-56, 2016.

[3]       Shejuan Xie, Mingming Tian, Hong-En Chen, Ying Zhao, Lei Wu, Zhenmao Chen, Tetsuya Uchimoto and Toshiyuki Takagi, Evaluation of wall thinning defect in magnetic material based on PECT method under magnetic saturation, Proceedings of 2DM2016, pp. 53-54, 2016.

[4]       Hong-En Chen, Shejuan Xie, Manru He, Zhenmao Chen, Evaluation of plastic deformation in carbon steel based on AC MFL method considering the effects of temperature and rolling directions, Proceedings of ENDE2016, pp. 141-142, 2016.

[5]       Manru He, Zongfei Tong, Hong-En Chen, Shejuan Xie, Zhenmao Chen, Simultaneous evaluation of residual stress and plastic deformation in ferromagnetic steel by using hybrid electromagnetic nondestructive testing method, Proceedings of 2DM2016, pp. 57-58, 2016.

[6]       Shejuan Xie, Wenlu Cai, Mingming Tian, Lei Wu, Zhenmao Chen, Tetsuya Uchimoto, Toshiyuki Takagi, Numerical method for nonlinear simulation of magnetic saturated pulsed eddy current testing signals and its application to evaluation of wall thinning in carbon steel piping, Proceedings of COMPUMAG2015, pp. 1-2, 2015.

[7]       Shejuan Xie, Beipei Fang, Wenlu Cai, Hong-En Chen, Zhenmao Chen, Sizing of defects in special shaped coolant pipe of tokamak magnet based on eddy current testing signals, Proceedings of ISEM2015, pp. 1-2, 2015.

[8]       Xiangfeng Ma, Shejuan Xie, Zhenmao Chen, Lingli Chen, Defects generation and propagation monitoring in multilayer structure of tokamak magnet based on acoustic emission method, Proceedings of ENDE2015, pp. 90-91, 2015.

[9]       Yali Du, Shejuan Xie, Xiaojuan Wang, Zhenmao Chen, Reconstruction of multiple cavity defects in metallic foam from DC potential drop signals, Proceedings of ENDE2015, pp. 88-89, 2015.

[10]      Haochen Liu, Shejuan Xie, Zhenmao Chen, Cuixiang Pei, Numerical simulation method for IR thermography NDE of delamination defect in multilayered plate, Proceedings of ISEM2015, pp. 5-6, 2015.

[11]      Wenlu Cai, Shejuan Xie, Xiaojuan Wang, Cuixiang Pei, Yong Li, Zhenmao Chen, Reconstruction of conductivity distribution of stress corrosion crack from DC potential drop signals, Proceedings of COMPUMAG2015, pp. 3-4, 2015.

[12]      Shejuan Xie, Zhenmao Chen, Hong-En Chen, Wenlu Cai, Toshiyuki Takagi, Tetsuya Uchimoto, Kensuke Yoshihara, Feasibility investigation of NDE for plastic deformation in biaxial specimen using PECT method, Proc. 19th ENDE, pp. 22-23, 2014.

[13]      S. Xie, Z. Chen, T. Takagi, T. Uchimoto, K. Yoshihara, Nondestructive evaluation of plastic deformation in biaxial specimen using pulsed ECT method, Proceedings of ICFD2014, pp. 262-263, 2014.

[14]      X. Wang, S. Xie, Z. Chen, Development of DCPD probe array for quantitative NDT of cavity defect in metallic foam, Proceedings of ENDE2014, pp. 119-120, 2014.

[15]      H. Feng, R. Urayama, S. Xie, T. Uchimoto, T. Takagi, Evaluation of environmental fatigue cracks using eddy current testing, Proceedings of ENDE2014, pp. 14-15, 2014.

[16]      Z. Chen, H. Chen, S. Xie, T. Uchimoto, T. Takagi, Characterization of plastic deformation by using electromagnetic NDT methods, Proceedings of AFI2014, pp. 76-77, 2014.

[17]      Shejuan Xie, Zhenmao Chen, Hong-En Chen, Wenlu Cai, Toshiyuki Takagi*, Tetsuya Uchimoto, Kensuke Yoshihara, Feasibility investigation of NDE for plastic deformation in biaxial specimen using PECT method, ENDE’2014, 西安,中国, 2014/6/25-28.

[18]      Shejuan Xie, Zhenmao Chen, Seiya Sato, Hong-En Chen, Tetsuya Uchimoto, Toshiyuki Takagi* and Yasuhiko Yoshida, Evaluation of plastic deformation and characterization of electromagnetic property using pulsed eddy current testing method, Proc. 16th ISEM, pp. 297-298, 魁北克, 加拿大, 2013/7/31-8/2.

[19]      Shejuan Xie, Zhenmao Chen, Haiqiang Zhou, Toshiyuki Takagi*, Tetsuya Uchimoto and Gerd Dobmann, Evaluation of wall thinning in carbon steel piping based on magnetic saturation pulsed eddy current testing method, Proc. 18th ENDE, pp. 61-64, 布拉迪斯拉发, 斯洛伐克共和国, 2013/6/25-28.

[20]      Shejuan Xie, Toshiyuki Takagi*, Tetsuya Uchimoto and Zhenmao Chen, Reconstruction of wall thinning from pulsed eddy current testing signals by using a hybrid inverse analysis method, Proc. 5th Annual ELyT Lab Workshop, pp. 1-2, Zaou, 日本, 2013/02/17-20.

[21]      Shejuan Xie, Zhenmao Chen, Hong-En Chen, Xiaowei Wang, Toshiyuki Takagi* and Tetsuya Uchimoto, Sizing of wall thinning defects using pulsed eddy current testing signals based on a hybrid inverse analysis method, Proc. of CEFC’2012, pp. 488, 大分, 日本, 2012/11/11-14.

[22]      Shejuan Xie, Zhenmao Chen, Toshiyuki Takagi* and Tetsuya Uchimoto, Sizing of pipe wall thinning using pulsed eddy current testing method based on inversion analysis, Proc. of Ninth International Conference on Flow Dynamics, pp. 132-133, 仙台, 日本, 2012/09/21.

[23]      Shejuan Xie, Zhenmao Chen, Xiaowei Wang, Li Wang, Toshiyuki Takagi* and Tetsuya Uchimoto, Three dimensional wall thinning defect reconstruction from pulsed eddy current testing signals, Proc. of Eighth International Conference on Flow Dynamics, pp. 426-427, 仙台, 日本, 2011/11/09.

[24]      Shejuan Xie, Toshiyuki Takagi*, Tetsuya Uchimoto, Zhenmao Chen and Li Wang, Forward and inverse simulations of pipe wall thinning using pulsed eddy current signals, Proc. of SiMCRT’2011 (Simulation and Modeling related to Computational Science and Robotics Technology), pp. 1-8, 神户, 日本, 2011/11/03,大会报告.

[25]      Shejuan Xie, Zhenmao Chen, Li Wang, Toshiyuki Takagi* and Tetsuya Uchimoto, An inversion scheme for sizing of wall thinning defect from pulsed eddy current testing signals, Proc. of ISEM’2011, pp. 293-294,  纳普勒斯, 意大利, 2011/09/08.

[26]      Shejuan Xie, Zhenmao Chen, Toshiyuki Takagi* and Tetsuya Uchimoto, Development of a very fast simulator for pulsed eddy current testing signals, COMPUMAG’2011, 悉尼, 澳大利亚, 2011/07/12.

[27]      Shejuan Xie, Toshiyuki Takagi*, Tetsuya Uchimoto and Zhenmao Chen, Quantitative non-destructive testing of local wall thinning defect based on an efficient simulator of pulsed eddy current testing signals, Proc. of ENDE’2011, pp. 58-59, 钦奈, 印度, 2011/03/11.

[28]      Shejuan Xie, Toshiyuki Takagi* and Tetsuya Uchimoto, Development of efficient numerical solver for signal prediction of pulsed eddy current testing, 2011 Annual ELyT Workshop, 仙台, 日本, 2011/02/22.

[29]      Xiaojuan Wang, Shejuan Xie, Jin Zhang, Zhenmao Chen*, An Efficient Numerical Scheme for Sizing of Cavity Defect in Metallic Foam from Signals of DC Potential Drop Method, Digit of Compumag’2013, PA5-19, 2013.

[30]      Xiaojuan Wang, Shejuan Xie, Xiaowei Wang, Zhenmao Chen*, Sizing of Cavity Defect in Metallic Foam from DC Potential Drop Signals with Stochastic Inversion Methods, Proc. Far East NDT Forum, 2013.

[31]      Zhenmao Chen*, Shejuan Xie, T. Uchimoto, Toshiyuki Takagi, Reconstruction of Wall Thinning from Pulsed Eddy Current Testing Signals, Proc. 13th Int. Symp. Adv. Fluid Inf., 28-29, 2013.

[32]      Zhenmao Chen*, Shejuan Xie, Xiaojuan Wang, Tetsuya Uchimoto, Toshiyuki Takagi, Evaluation of Cavity Defect in Metallic Foam with DCPD Method, Proc. 1st Int. Symp. Smart Layered Material and Structures for Energy Saving, OS8-12, p1-2, 2013.

[33]      Zhenmao Chen*, Shejuan Xie, Xiaowei Wang, Yong Li, Tetsuya Uchimoto and Toshiyuki Takagi, Comparison of Inversion method for reconstruction of defect from pulsed eddy current testing signals, in 8th AFI/TFI, 9-th ICFD, 1-2, 2012.

[34]      Zhenmao Chen*, Shejuan Xie, Xiaowei Wang, Yong Li, Tetsuya Uchimoto and Toshiyuki Takagi, Reconstruction of Wall thinning from pulsed eddy current signals, in Prof. of 7th AFI/TFI, 158-159, 2011.

[35]    Zhenmao Chen*, Shejuan Xie, Li Wang, Tetsuya Uchimoto and Toshiyuki Takagi, Reconstruction of Stress Corrosion Crack with multifrequency ECT signals, presented in 8th ICFD, OS8-12, 2011.

 

 

专著和主编国际丛书

[1]       陈振茂,解社娟,曾志伟,裴翠祥,电磁无损检测数值模拟方法,机械工业出版社,2017.

[2]       Zhenmao ChenShejuan Xie, Yong Li, Electromagnetic Nondestructive Evaluation XVIII, Vol.40 of Studies on Applied Electromagnetics and Mechanics Book Series. IOS Press, (ISSN 1383-7281), 2015.

 

【授权专利】

[1]       解社娟,田明明,朱光艺,李鹏,尚巍,陈振茂,一种针对管道缺陷检测的磁力传动式阵列涡流探头及方法,发明专利,授权号:ZL201710037001.7,中国,2018-03-13.

[2]       解社娟,田明明,朱光艺,李鹏,尚巍,陈振茂,一种针对管道缺陷检测的磁力传动式阵列涡流探头,实用新型专利,授权号:ZL201720060472.5,中国,2017-09-12.

[3]       解社娟,田明明,朱光艺,李鹏,陈振茂,一种针对管道检测的磁力传动式穿透型涡流探头,实用新型专利,授权号:ZL201720060473.X,中国,2017-09-12.

[4]       解社娟,赵莹,田明明,陈振茂,仝宗飞,一种基于缺陷深度的选频带脉冲涡流无损检测方法,发明专利,授权号:ZL201611031113.3,中国,2017-11-28.

[5]       解社娟,田明明,陈振茂,陈洪恩,吴磊,一种基于脉冲涡流和电磁超声复合的体缺陷无损检测方法,发明专利,授权号:ZL201510639133.8,中国,2017-07-28.

[6]       解社娟,陈振茂,吴磊,陈洪恩,蔡文路,田明明,方倍培,基于非线性磁饱和脉冲涡流的铁磁管道定量无损评价方法,发明专利,授权号:ZL201510350720.5,中国,2017-09-12.

[7]      陈振茂,蔡文路,解社娟,裴翠祥,基于四端子直流电位检测信号的裂纹电导率测定方法,发明专利,授权号:ZL201510718109.3,中国,2017-12-26.

[8]      陈振茂,谢铮,蔡文路,解社娟,裴翠祥,一种可进行在线检测的裂纹闭口装置和使用方法,发明专利,授权号:ZL201510116228.1,中国,2017-07-25.

[9]      陈振茂,蔡文路,谢铮,解社娟,裴翠祥,一种涡流检测用模拟应力腐蚀裂纹的制备方法,发明专利,授权号:ZL201510116230.9,中国,2017-06-20.

[10]     陈振茂,杨桂才,李勇,解社娟,蔡文路. 一种基于电磁超声相控阵聚焦原理的小径弯管无损检测方法, 2015.08.05,中国,ZL201410289724.2.

[11]     陈振茂,杨桂才,李勇,解社娟,蔡文路. 一种基于旋转磁场的小径管结构电磁超声无损检测方法, 2015.08.05,中国,ZL201410216529.7.

[12]     陈振茂,蔡文路,解社娟,李勇,黄太回,李红梅,王丽,基于四端子实验信号和数值仿真的局域电导率测定方法, 2015.07.08,中国,ZL201410193554.8.

 

【申请专利】

[1]      解社娟,田明明,仝宗飞,任国栋,刘烨,陈振茂,基于小波分析的脉冲涡流电磁超声复合无损检测方法,发明专利,申请号:201711161571.3,中国,申请日:2017-11-20.
[2]      解社娟,仝宗飞,朱光艺,李鹏,田明明,陈振茂,一种基于直流电位和涡流检测法的材料电磁属性测量方法,发明专利,申请号:201711258187.5,中国,申请日:2017-12-01.
[3]      解社娟,许盼盼,陈华,陈洪恩,陈振茂,周海强,张伟斌,一种基于声发射信号的PBX损伤演化CT原位分析方法,发明专利,申请号:201711332249.2,中国,申请日:2017-12-13.
[4]      解社娟,张磊,孔玉莹,王小刚,马强,陈振茂,引入多介质单元的指套管不规则磨损缺陷的涡流检测方法,发明专利,申请号:201711498577.X,中国,申请日期:2017-12-29.
[5]      解社娟,仝宗飞,唐敬达,陈振茂,许盼盼,乔严程,基于交变磁场脉冲红外的磁性水凝胶均匀性无损评价方法,发明专利,申请号:201810086447.3,中国,申请日期:2018-01-29.
[6]      解社娟,仝宗飞,陈振茂,李旭东,孙祥,基于频域叠加法和能量等效法的脉冲涡流红外数值模拟方法,发明专利,申请号:201810226773.X,中国,申请日期:2018-03-19.

 

【学术获奖】

[1]      解社娟,2017年度新疆维吾尔自治区科技进步奖二等奖,定量涡流检测新技术和在承压静设备无损检测中的应用,朱光艺,陈振茂,李鹏,解社娟,尚巍,依马木艾山•买买提,刘烨,蔡文路,任国栋。2018. 02. 28
[2]     解社娟,2016 年度国内远东无损检测新技术论坛攀登奖(每年 2 人,国内国际各1人),2016.
[3]     解社娟,A Research on Numerical Simulation of ACFM Signals for Nondestructive Inspection of Buried Pipes in Nuclear Power Plants,日本保全学会论文奖,2018.
[4]     李丽娟,解社娟,陈洪恩,陈振茂,碳钢塑性变形对增量磁导率信号的影响分析,2017 年度远东无损检测新技术论坛优秀论文一等奖,2017.
[5]     田明明,解社娟,肖盼,裴翠祥,李勇,陈振茂,基于脉冲涡流/电磁超声复合检测方法的复杂缺陷检测,2016 年度远东无损检测新技术论坛优秀论文一等奖,2016.
[6]     张静,解社娟,陈振茂*,直流电位法泡沫金属无损检测实验研究,2010 年度远东无损检测新技术论坛优秀论文一等奖,2010.