研究成果

 

发表的论文统计(Publication list)
 

Welcome to my Researcher ID

 

 

2019

1.      周小楠,张建飞,黄鑫,智强,杨建锋,王波,多孔重结晶碳化硅陶瓷的烧结颈结构调控与力学性能,硅酸盐学报,47 [9] XX (2019)

2.      朱宇璇, 智强, 王波, 杨建锋, 顾士甲, 张国军,α-Si3N4 粉体原料对多孔氮化硅陶瓷微观组织和力学性能的影响, 硅酸盐学报,47 [9] XX (2019)

3.      李紫璇, 丁克, 郝留成, 袁端鹏, 杨建锋, 王波. 特高压气体绝缘金属封闭 开关设备用Al 2 O 3 /环氧树脂复合材料的非等温固化动力学及蠕变性能[J/OL].复合材料学报. https://doi.org/10.13801/j.cnki.fhclxb.20190625.002

4.      王阳阳, 贾晨, 贾先, 杨建锋, 碳化硅晶须增韧复合材料的研究现状, 兵器材料科学与工程,42[4] 142-146 (2019)

5.      王阳阳, 贾晨, 杨建锋, 贾先,高铬铸铁的冲蚀磨损性能研究,热加工工艺,48[4] 63-66 (2019)

6.      Nan-Long Zhang, Jian-Feng Yang, Yu-Chen Deng, Bo Wang, Ping Yin. Preparation and properties of reaction bonded silicon carbide (RB-SiC) ceramics with high SiC percentage by two-step sintering using compound carbon sources, CERAMICS INTERNATIONAL, 45 [12] 15715-15719 (2019)

7.      Yuchen Deng, Yaming Zhang, Nanlong Zhang, Qiang Zhi, Bo Wang, Jianfeng Yang. High Thermal Conductivity of Pure Dense SiC Ceramics Prepared via HTPVT, Functional Materials Letters, 12 (3) 1950032 (2019)

 

2018

8.      赵杉, 张建飞, 刘虎林, 杨建锋, 王波, 碳热还原结合重结晶制备多孔SiC陶瓷及其力学性能第13 10 文,1194-1198

9.      唐健江, 刘波波, 杨建锋, 白俊春, 3MOCVD 生长高质量 InGaN/AlGaN MQW 紫光 LED 的研究,科技视界,177-178

10.  于方丽, 杨建锋, 白宇, 基于多孔 Si3N4 陶瓷基底 BN 涂层制备与表征2017 8 Vol.53 No.8 陶瓷,11-15

11.  Yaming Zhang, Haixia Guo, Hui Zhang, Yuchen Deng, Bo Wang and Jianfeng Yang, Effect of Added Mullite Whisker on Properties of Lithium Aluminosilicate (LAS) Glass-Ceramics Prepared for Dental Restoration, JOURNAL OF BIOMEDICAL NANOTECHNOLOGY, 14[11] 1944-1952 (2018)    IF=5.068

12.  Yaming Zhang, Haixia Guo, Bo Wang and Jianfeng Yang, Effect of ZrO2 and MgO doping on microstructure and properties of translucent alumina fabricated by rapid vacuum sintering, FUNCTIONAL MATERIALS LETTERS, 11[5: SI] 1850040 (2018)    IF=1.084

13.  Haixia Guo, Biaoqiang Hou, Yaming Zhang, Bo Wang and Jianfeng Yang, Influence of Fe and Al2O3 Addition on the Mechanical and Tribological Properties of Cu-Based Composites, SCIENCE OF ADVANCED MATERIALS, 10[8] 1100-1104 (2018)     IF=1.318

14.  Jinxiao Wang, Jun Yang, Ning Han, Jianfeng Yang, Acetone Gas Sensing Properties of Au-activated Ni-doped ZnO Nanoparticles Prepared by Coprecipitation Method, RARE METAL MATERIALS AND ENGINEERING, 47[6] 1682-1688 (2018)

15.  Yaming Zhang, Dejun Zeng, Bo Wang and Jianfeng Yang, Effect of heating parameters on sintering behaviors and properties of mullite whisker frameworks, NANOTECHNOLOGY, 29 (16) 164001, 2018      IF=3.404

16.   Jinxiao Wang, Jianfeng Yang, Jun Yang, Guanjun Qiao, Hang Wang,  WangRui HuSuperior MoS2-decorated CNT composite materials for photoelectric detectorsOptical Materials 86 (2018) 113–118 IF=2.3   

 

2017

17.  高昌乐, 王子敬, 刘凯凯, 王旭东, 杨建锋, 波,两步常压烧结工艺对氧化铝陶瓷制备及性能的影响《铸造技术》061269-1273 (2017)

18.  Jinxiao Wang, Zheng Xie, Yuan Si, Xinyi Liu, Xinyuan Zhou, Jianfeng Yang, Peng Hu, Ning Han, Jun Yang and Yunfa Chen, Ag-Modified In2O3 Nanoparticles for Highly Sensitive and Selective Ethanol Alarming, Sensors, 17[10], 2220 (2017)

19.  Qiang Zhi, Zhaoyun Xu, Huan Pan, Jianfeng Yang, Yuchen Deng, and Bo Wang, Fabrication and strengthening of porous Si3N4 ceramics by replacement of oxide phase with Si3N4 at grain boundary through carbothermal nitridation, JOURNAL OF MATERIALS RESEARCH, 32[17], 3344-3352 (2017)

20.  Jinxiao Wang, Jun Yang, Ning Han, Xinyuan Zhou, Shuyan Gong, Jianfeng Yang, Peng Hu, Yunfa Chen, Highly sensitive and selective ethanol and acetone gas sensors based on modified ZnO nanomaterials, MATERIALS & DESIGN, 121, 69-76 (2017)

21.  Xiao Zhang, Sen Liang, Haibo Li, Jianfeng Yang, Mechanical and optical properties of transparent alumina obtained by rapid vacuum sintering, CERAMICS INTERNATIONAL, 43 [1], 420-426 (2017)

 

2016

22.  Shao-Chun Xu, Nan-Long Zhang, Jian-Feng Yang, Bo Wang, Chang-Yeoul Kim, Silicon carbide-based foams derived from foamed SiC-filled phenolic resin by reactive infiltration of silicon, CERAMICS INTERNATIONAL, 42[13] 14760–14764 (2016)

23.  Dejun Zeng, Haihong Zhang, Jianfeng Yang, Bo Wang, Xiaolin Zhang, Microstructure and property of porous mullites with a whiskers framework obtained by a sol–gel process, Ceramics International, 42[9] 11270–11274 (2016)

24.  De-Jun Zeng, Ya-Ming Zhang, Jian-Feng Yang, Bo Wang, and Junichi Matsushita, Fabrication and Property of Mullite Whiskers Frameworks with an Ultrahigh Porosity by Expandable Mesocarbon Microbeads, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 99[7] 2226-2228 (2016)

25.  Xinghua Yang, Jianguang Bai, Wenjia Jing, Bo Wang, Jianfeng Yang, Strengthening of low-temperature sintered vitrified bond cBN grinding wheels by pre-oxidation of cBN abrasives, Ceramics International, 42 [7] 9283–9286 (2016)

26.  Yaming Zhang, Haihong Zhang, Jianfeng Yang and Gangqiang Ge, Erosion Resistance and Interface Properties of Epoxy Composite Filled With Graded Silicon Carbide, POLYMERS & POLYMER COMPOSITES, 24 [2] 161-166 (2016)

 

2015

27.  Yi Qin, Ting Zhao, Bo Wang, Jian-Feng Yang, Deposition Time Dependent Size of Si Quantum Dots Embedded in Amorphous SiC Matrix, Journal of Nanoscience and Nanotechnology, 15 [9] 7346-7350 (2015)

28.  Dejun Zeng, Haihong Zhang, Bo Wang, Kezheng Sang, and Jianfeng Yang, 
Effect of Ammonia Concentration on Silica Spheres Morphology and Solution Hydroxyl Concentration in 
Stober Process 
 Journal of Nanoscience and Nanotechnology, 15[9] 7407-7411 (2015)

29.  Ting Zhao, Yi Qin, Bo Wang, and Jian-Feng Yang, Comparative Study of Hydrogen and Argon Dilution Effects in Amorphous SiC Thin Films Deposited by 
Plasma Enhanced Chemical Vapor Deposition, 
Journal of Nanoscience and Nanotechnology, 15, 7371-7375 (2015)

30.  HaiHong Zhang, YaLi Xu, Bo Wang, Xiao Zhang, Jianfeng Yang, Koichi Niihara, Effects of heating rate on the microstructure and mechanical properties of rapid vacuum sintered translucent alumina, CERAMICS INTERNATIONAL, 41[9] 12499-12503 (2015)

31.  Yingying Zhao, Hongyan Xia, Rui Tang, Zhongqi Shi, Jianfeng Yang, Jiping Wang, A low cost preparation of C/SiC composites by infiltrating molten Si into gelcasted pure porous carbon preform, CERAMICS INTERNATIONAL, 41[5] 6478-6487 (2015)

32.  Haihong Zhang, Yaming Zhang, Bo Wang, Jianfeng Yang, Preparation and characterization of continuous alumina based fiber reinforced with orientated mullite whisker, CHEMICAL ENGINEERING JOURNAL, 268, 109-115 (2015)

33.  Bo Wang, Zhao-Yun Xu, Feng Jin, Jian-Feng Yang, Kozo Ishizaki, Synthesis of rod-like beta-Si3N4 seed crystals with tailored morphology, CERAMICS INTERNATIONAL, 41[4] 5348-5354 (2015)

34.  鲁元,杨建锋,李京龙,李鹏,Yuan LU, Jianfeng Yang, Jinglong LI, Peng LI, 挤压铸造法制备双连续氮化钛增强铝基复合材料, 硅酸盐学报, 43[4] 1-6 (2015)

35.  , 李京龙, 杨建锋, , Yuan Lu, Jing-Long Li, Jian-Feng Yang, Peng Li, 热处理温度对双连续β-氮化硅增强铝基复合材料性能的影响(Effects of Heat-treatment Temperature on Properties of Co-continuous beta-Si3N4 Reinforced Al Matrix Composites), 无机材料学报(JOURNAL OF INORGANIC MATERIALS), 30 [3] 277-281 (2015)

36.  Bo Wang, Hui Zhang, Hoang-Tuan Phuong, Feng Jin, Jian-Feng Yang, Kozo Ishizaki, Gas permeability and adsorbability of the glass-bonded porous silicon carbide ceramics with controlled pore size, CERAMICS INTERNATIONAL, 41[2] 2279-2285 (2015)

37.  Ting Zhao, Yi Qin, Bo Wang, Jian-Feng Yang, Improved densification and properties of pressureless-sintered lithium disilicate glass-ceramics, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 620, 399-406 (2015)

38.  牛永辉; 杨军; 朱浪涛; 杨建锋; 白宇,超音速等离子喷涂ZrO2 -MoSi2涂层的组织及耐磨性能,金属热处理, 40 [8] 83-87 (2015)

39.  徐照芸; 王波; 杨建锋; 赵中坚; 胡伟; 施志伟, Si3N4的氧化预处理对浆料流变性及多孔陶瓷性能的影响(Effects of oxidation treatment of Si3N4 on rheology of aqueous suspensions and properties of porous Si3N4 ceramic), 科学通报(Chinese Science Bulletin),  60[3] 309-315 (2015)

40.   鲍崇高; 宋奕侨; 侯书增; 杨兴化; 杨建锋; 姚文静, 磨料表面微氧化对cBN磨具磨削性能的影响(Effect of the cBN Grit Surface Oxidation on Grinding Performance of the Vitrified cBN Tool), 西安交通大学学报(Journal of Xi'an Jiaotong University), 49[2] 124-129 (2015)

41.  Kuo Zhang, Zhongqi Shi, Hongyan Xia, Ke Wang, Guiwu Liu, Guanjun Qiao, Jianfeng Yang, Preparation and thermophysical properties of directional SiC/Cu-Si composite via spontaneous infiltration, Ceramics International, 42[1] 996-1001 (2015)

 

2014

42.  Jianguang Bai, Xinghua Yang, Shaochun Xu, Wenjia Jing, Jianfeng Yang, Preparation of foam glass from waste glass and fly ash, MATERIALS LETTERS, 136, 52-54 (2014)

43.  Zhaoyun Xu, Bo Wang, Jianfeng Yang, Zhongjian Zhao, Preparation of Porous Si3N4 Ceramics with Controlled Porosity and Microstructure by Fibrous alpha-Si3N4 Addition, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 97[11] 3392-3395 (2014)

44.  Pei Zhang, Xinghua Li, Jianfeng Yang, Shaochun Xu, Effect of heat treatment on the microstructure and properties of lithium disilicate glass-ceramics, JOURNAL OF NON-CRYSTALLINE SOLIDS, 402, 101-105 (2014)

45.  Wanli Yang, Zhongqi Shi, Hailong Wang, Guanjun Qiao, Yongfeng Li, Jianfeng Yang, Zhihao Jin, Effects of ZrO2 on the Nitridation Behavior and Mechanical Properties of Reaction-Bonded Si3N4/h-BN Composite, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 23[10] 3436-3443 (2014)

46.  赵婷、秦毅、吴桐、王波、杨建锋Effect of Particle Size on the Sintering Behavior, Microstructure and Flexural Strength of Lithium Disilicate Glass-Ceramics, 稀有金属材料与工程, 2014,43(Z1): 24-28 (2014)

47.  Ting Zhao, Yi Qin, Pei Zhang, Bo Wang, Jian-Feng Yang, High-performance, reaction sintered lithium disilicate glass-ceramics, CERAMICS INTERNATIONAL, 40[8] 12449-12457 (2014)

48.  张俊禧,徐照芸,王波,秦毅,杨建锋,赵中坚,胡伟,施志伟,氮气压力对多孔氮化硅陶瓷显微组织和力学性能的影响, 无机材料学报, 29[7] 701-705 (2014)

49.  秦毅,赵婷,王波,杨建锋PECVD沉积和原位退火时间对h-BN薄膜组成及光学带隙的影响,无机材料学报, 29[7] 729-734 (2014)

50.  Bo Wang, Zhao-Yun Xu, Wei-Zhong Lu, Feng Jin, Jian-Feng Yang, Koichi Niihara, Effect of porous Si3N4 preform on the mechanical properties of Si3N4/Al composites with interpenetrating network structure MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 607, 307-312 (2014)

51.  Bo Wang, Yi Qin, Feng Jin, Jian-Feng Yang, Kozo Ishizaki, Pulse electric current sintering of cubic boron nitride/tungsten carbide-cobalt (cBN/WC-Co) composites: Effect of cBN particle size and volume fraction on their microstructure and properties, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 607, 490-497 (2014)

52.  Pei Zhang, Xinghua Li, Jianfeng Yang, Shaochun Xu, The crystallization and microstructure evolution of lithium disilicate-based glass-ceramic Journal of Non-Crystalline Solids, 392, 26-30 (2014)

53.  Kezheng Sang, Jianfeng Yang, Wenpeng Shi, Hongyang Sun, Preparation of coatings on alumina ceramic for wettability, Ceramics International, 40[4] 5659-5663 (2014)

54.  Bo Wang, Shao-Chun Xu, Feng Jin, Jian-Feng Yang, Kozo Ishizaki, Koichi Niihara, Effect of LiAlSiO4 particle size on the properties of LAS/SiC porous ceramics with near zero thermal expansion, Ceramics International, 40[2] 2853-2856 (2014)

55.  Haihong Zhang, Dejun Zeng, Bo Wang, Jian-Feng Yang, Preparation and characteristics of spinnable sol and continuous mullite fibers with nano silica addition, Journal of Sol-Gel Science and Technology, 69[2] 311-319 (2014)

56.  Haihong Zhang, Yong Hang, Yi Qin, Jian-Feng Yang, Bo Wang, Synthesis and characterization of sol-gel derived continuous spinning alumina based fibers with silica nano-powders, Journal of the European Ceramic Society, 34[2] 465-473 (2014)

57.  Yi Qin, Ting Zhao, Bo Wang, Pengxiang Zhang, Jianfeng Yang, Development of a transverse thermoelectric voltage effect in artificial SrTiO3/SrTi1-xNbxO3 epitaxial multilayer films with incline-oriented sublayers, Crystengcomm, 16[24] 5345-5351 (2014)

58.  Wang, Bo; Yang, Xing-Hua; Zeng, De-Jun; Jian-Feng Yang, Kozo Ishizaki, Koichi Niihara, Effect of glassy bonding materials on the properties of LAS/SiC porous ceramics with near zero thermal expansion, Journal of the European Ceramic Society, 34[1] 97-101 (2014)

59.  桑可正,韩璐,史文鹏,杨建锋,氧化铝陶瓷表面化学气相沉积钛涂层的制备及性能,《硅酸盐学报》2014,42(7):836-840

60.  刘娟娟,桑可正,韩璐,杨建锋Al2O3陶瓷表面化学气相沉积Ni涂层及其与Cu润湿性,《硅酸盐学报》 2014,42(4):397-401

 

2013

61.   Zhao, L.; Bai, Y.; Tang, J. J.; Liu, K; Ding, C. H; Yang, J. F.; Han, Z. H. Effect of particle in-flight behavior on the composition of thermal barrier coatings, Applied Surface Science, 286, 184-191 (2013)

62.  Zhang Xiao; Lu Lingtao; Yang Jianfeng; et al. Effect of the Sealing Process on the Structure and Mechanical Properties of Ceramic-Metal Sealing Fitting, Rare Metal Materials and Engineering: 42 [1] 145-148 (2013)

63.  Yonggui Shi, Xinghua Yang, Dong Wang, Peng Zhang, Jincheng Zhang, Yue Hao, Jianfeng Yang. Enlargement of Silicon Carbide Lely Platelet by Physical Vapor Transport Technique, Materials and Manufacturing Processes, 28 [11] 1248-1252 (2013)

64.  Sen Liang, Xiao Zhang, Haibo Li, Min Luo, Jin Li, Lijun He, Jianfeng Yang. Fabrication and characterization of Ni-Mn-Si-Al-O NTC thermistor and its application as temperature wire sensor, Functional Materials Letters, 6 [4] 1350039 (2013)

65.  Jianguang Bai, Xinghua Yang, Shaochun Xu, et al. Fabrication of highly dense Al2O3 ceramics, Scripta Materialia Volume: 68 Issue: 6 Pages: 393-395 Published: MAR 2013

66.  Yuan Lu, Jian-Feng Yang, Jing-Long Li, Fabrication of Porous Silicon Nitride with High Porosity by Carbothermal Reduction-reaction Bonding, Journal of Inorganic Materials 28 [5] 469-473 (2013)

67.  Yu Bai, Jianjiang Tang, Yanmei Qu, et al. Influence of original powders on the microstructure and properties of thermal barrier coatings deposited by supersonic atmospheric plasma spraying, Part I: Microstructure, Ceramics International, 39 [5] 5113-5124 (2013)

68.  Yu Bai, Lei Zhao, Jianjiang Tang, et al. Influence of original powders on the microstructure and properties of thermal barrier coatings deposited by supersonic atmospheric plasma spraying, part II: Properties, Ceramics International, 39[4] 4437-4448 (2013)

69.  Fang-Li Yu, Yu Bai, Yi Qin, et al. Influence of Substrate Temperature on the Morphology, Composition and Growth Rate of SiC Films Deposited by PECVD, Journal of Inorganic Materials, 28 [2] 201-206 (2013)

70.  Yi Qin, Ting Zhao, Hai-Hong Zhang et al. Large transverse thermoelectric voltage effect in incline-oriented SrTi1-xNbxO3 films with cubic structure, 102 [25] 253901 (2013)

71.  Sen Liang, Xiao Zhang, Min Luo et al. Study of structural and electrical properties of Ni-Mn-Mg-AI-O NTC thermistor thick film prepared by SAPS method, Electronic Components & Materials, 32 [5] 26-9 (2013)

 

2012

72.  Rongzhen Liu, Guiwu Liu, Jianfeng Yang, Haiyun Jin, Yuan Lu, Wenwei Gu, Effect of removal of silicon on preparation of porous SiC ceramics following reaction bonding and recrystallization, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 552, 9-14 (2012)

73.  Bo Wang, Koji Matsumaru, Jianfeng Yang, Zhengyi Fu, Kozo Ishizaki, The Effect of cBN Additions on Densification, Microstructure and Properties of WC-Co Composites by Pulse Electric Current Sintering, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 95(8), 2499-2503 (2012)

74.  Qian Zhang, Litong Guo, Tianwen Guo, Jianfeng Yang, Influence of Sn on the adhesion between titanium and porcelain, MATERIALS LETTERS, 79, 300-302 (2012)

75.  Jun Li, Jianfeng Yang, Guagjun Qiao, Effect of Bonding Temperature on Microstructure and Strength of W/CuCrZr Alloy Joints Diffusion Bonded with a Ti Interlayer, RARE METAL MATERIALS AND ENGINEERING, 41(7) 1235-1238 (2012)

76.  Yong-gui Shi, Pei-yun Dai, Jianfeng Yang, Zhi-hao Jin, Hu-lin Liu, Effect of 6H-SiC crystal growth shapes on thermo-elastic stress in the growing crystal, INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 19(7) 622-627 (2012)

77.  Xiao Zhang, Sen Liang, Pei Zhang, Ting Zhao, Yu Bai, Chong-Gao Bao, Jianfeng Yang, Guan-Jun Qiao, Fabrication of Transparent Alumina by Rapid Vacuum Pressureless Sintering Technology, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 95(7) 2116-2119 (2012)

78.  J. M. Li, J. Y. Yin, C. Cai, Z. Zhang, J. F. Li, Jianfeng Yang, M. Z. Xue, Y. G. Liu, Corrosion behavior of nanostructured Ni-Si3N4 composite films: A study of electrochemical impedance spectroscopy, MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 63 (7) 620-626 (2012)

79.  Jianguang Bai, Xinghua Yang, Yonggui Shi, Shaochun Xu, Jianfeng Yang, Fabrication of directional SiC porous ceramics using Fe2O3 as pore-forming agent, MATERIALS LETTERS, 78, 192-194 (2012)

80.  Yonggui Shi, Jianfeng Yang, Hulin Liu, Peiyun Dai, Bobo Liu, Zhihao Jin, Guanjun Qiao, Hailiang Li, Fabrication and mechanism of 6H-type silicon carbide whiskers by physical vapor transport technique, JOURNAL OF CRYSTAL GROWTH, 349(1) 68-74 (2012)

81.  Bo Wang, Koji Matsumaru, Jianfeng Yang, Zhengyi Fu, Kozo Ishizaki, Mechanical behavior of cellular borosilicate glass with pressurized Ar-filled closed pores, ACTA MATERIALIA, 60(10) 4185-4193 (2012)

82.  Chao Cai, Zhao Zhang, Zhong-ling Wei, Jianfeng Yang, Jin-feng Li, Electrochemical and corrosion behaviors of pure Mg in neutral 1.0% NaCl solution, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 22(4) 970-976 (2012)

83.  Qiongxi Liu, Jianfeng Yang, The Ultimate Stress of Small Grain Shellproof Ceramic Composite, FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6, Applied Mechanics and Materials, 121-126, 524-528 (2012)

84.  Yu Bai, Fang Li Yu, Soo Wohn Lee, Huang Chen, Jianfeng Yang, Characterization of the Near-Eutectic Al2O3-40wt% ZrO2 Composite Coating Fabricated by Atmospheric Plasma Spray. Part II: Microstructure and Mechanical Properties of Nanocomposite Coating, MATERIALS AND MANUFACTURING PROCESSES, 27(1) 58-64 (2012)

85.  Yonggui Shi, Peiyun Dai, Jianfeng Yang, Zhihao Jin, Jikuan Cheng, Hulin Liu, Effects of Grain Size of Source Material on Growing 6H-SiC Bulk Crystal by Physical Vapor Transport, MATERIALS AND MANUFACTURING PROCESSES, 27(1) 84-87 (2012)

86.  Jian Zhang, Jun Yang, Langtao Zhu, Zhihai Han, Jianfeng Yang, Yu Bai, Microstructure and thermal shock resistance of Cr2O3 ceramic coatings deposited by supersonic atmosphere plasma spraying, Journal of the Chinese Ceramic Society, 40[9] 1356-1362 (2012)

87.  Chang Chen, Dongping Tian, Jianfeng Yang, Guanjun Qiao, Tingshu He, Yonghua Wu, High-temperature performance of porous Fe-Cr-Ni matrix composites reinforced with nano-particles of Al2O3, Journal of the Chinese Ceramic Society, 40 [7] 1040-1045 (2012)

88.  Fang-Li Yu, Yu Bai, Jun Du, Huan-Rui Wang, Jianfeng Yang, Study on the microstructure, mechanical properties and gas permeability of porous Si3N4 ceramics, Journal of Synthetic Crystals, 41 [3] 656-660 (2012)

 

 

2011

89.  J. Li, J.-F. Yang, J.-L. Chen, “High heat load properties of actively cooled W/CuCrZr mock-ups by diffusion bonding with Ni or Ti interlayer”, Fusion Engineering and Design, 86 [12] 2874-2878 (2011)