https://www.scopus.com/authid/detail.uri?authorId=36450861800
https://orcid.org/0000-0002-9482-4814
※ International Journal publications / 国际期刊
2020
Yanshan Lou*, Saijun Zhang*, Jeong Whan Yoon*, 2020. Strength modeling of sheet metals from shear to plane strain tension. International Journal of Plasticity 134, 102813. IF: 5.702
https://doi.org/10.1016/j.ijplas.2020.102813
Saijun Zhang*, Yanchun Lu, Zhaohui Shen, Chi Zhou, Yanshan Lou, 2020. Prediction of ductile fracture for Al6016-T4 with a ductile fracture criterion: Experiment and simulation. International Journal of Damage Mechanics 29, 1199-1221. IF: 3.125; Citation: 1
https://doi.org/10.1177/1056789519865771
2019
Yanshan Lou, Jeong Whan Yoon*, 2019. Alternative approach to model ductile fracture by incorporating anisotropic yield function. International Journal of Solids and Structures 164, 12-24. IF: 2.760; Citation: 10
https://doi.org/10.1016/j.ijsolstr.2019.01.011
Yanshan Lou, Saijun Zhang, Jeong Whan Yoon*, 2019. A reduced Yld2004 function for modeling of anisotropic plastic deformation of metals under triaxial loading. International Journal of Mechanical Science 161/162, 105027. IF: 2.884; Citation: 6
https://doi.org/10.1016/j.ijmecsci.2019.105027
Xinke Xiao*, Yaopei Wang, Vladislav V. Vershinin, Lin Chen, Yanshan Lou, 2019. Effect of Lode angle in predicting the ballistic resistance of Weldox 700 E steel plates struck by blunt projectiles. International Journal of Impact Engineering 128, 46-71. IF: 3.642; Citation: 8
https://doi.org/10.1016/j.ijimpeng.2019.02.004
Xinke Xiao*, Hao Pan, Yuanli Bai, Yanshan Lou, Lin Chen, 2019. Application of the modified Mohr–Coulomb fracture criterion in predicting the ballistic resistance of 2024-T351 aluminum alloy plates impacted by blunt projectiles. International Journal of Impact Engineering 123, 26-37. IF: 3.642; Citation: 16
https://doi.org/10.1016/j.ijimpeng.2018.09.015
Bingtao Tang*, Yanshan Lou*, 2019. Effect of anisotropic yield functions on the accuracy of material flow and its experimental verification. Acta Mechanica Solida Sinica 32, 50-68. IF: 1.149; Citation: 3
https://doi.org/10.1007/s10338-018-0043-5
Prudvi Reddy Paresi, Yanshan Lou, Arunachalam Narayanan, Jeong Whan Yoon*, 2019. Enhanced Constitutive Model for Aeronautic Aluminium Alloy (AA2024-T351) under High Strain Rates and Elevated Temperatures. International Journal of Automotive Technology, 20, 79–87.
https://doi.org/10.1007/s12239-019-0130-8
before 2019
1. Yanshan Lou, Jeong Whan Yoon*, Hoon Huh, 2014. Modeling of shear ductile fracture considering a changeable cut-off value for the stress triaxiality. International Journal of Plasticity 54, 56-80. IF: 5.702; Citation: 195; ESI Highly Cited paper
https://doi.org/10.1016/j.ijplas.2013.08.006
2. Jeong Whan Yoon*, Yanshan Lou*, Jong Hun Yoon, Michael V. Glazoff, 2014. Asymmetric yield function based on stress invariants for pressure sensitive metals. International Journal of Plasticity 56, 184-202. IF: 5.702; Citation: 105
https://doi.org/10.1016/j.ijplas.2013.11.008
3. Yanshan Lou, Jeong Whan Yoon*, 2017. Anisotropic ductile fracture criterion based on linear transformation. International Journal of Plasticity 93, 3-25. IF: 5.702; Citation: 44
https://doi.org/10.1016/j.ijplas.2017.04.008
4. Yanshan Lou, Jeong Whan Yoon*, 2018. Anisotropic yield function based on stress invariants for BCC and FCC metals and its extension to ductile fracture criterion. International Journal of Plasticity 101, 125-155. IF: 5.702; Citation: 55
https://doi.org/10.1016/j.ijplas.2017.10.012
5. Namsu Park, Hoon Huh, Sungjun Lim, Yanshan Lou, Yeon Sik Kang, Min Hong Seo, 2017. Fracture-based forming limit criteria for anisotropic materials in sheet metal forming. International Journal of Plasticity 96, 1-35. IF: 5.702; Citation: 69
https://doi.org/10.1016/j.ijplas.2016.04.014
6. Yanshan Lou, Hoon Huh*, Sungjun Lim, Keunhwan Pack, 2012. New Ductile Fracture Criterion for Prediction of Fracture Forming Limit Diagrams of Sheet Metal. International Journal of Solids and Structures 49, 3605-3615. IF: 2.760; Citation: 275; ESI Highly Cited paper
https://doi.org/10.1016/j.ijsolstr.2012.02.016
7. Yanshan Lou, Hoon Huh*, 2013. Extension of a shear-controlled ductile fracture model considering the stress triaxiality and the Lode Parameter. International Journal of Solids and Structures 50, 447-455. IF: 2.760; Citation: 111
https://doi.org/10.1016/j.ijsolstr.2012.10.007
8. Yanshan Lou, Lin Chen, Till Clausmeyer, A. Erman Tekkaya, Jeong Whan Yoon, 2016. Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals. International Journal of Solids and Structures 112, 169-184. IF: 2.760; Citation: 82
https://doi.org/10.1016/j.ijsolstr.2016.11.034
9. Yanshan Lou, Hoon Huh*, 2013. Prediction of ductile fracture for advanced high strength steel with a new criterion: experiments and simulation. Journal of Materials Processing Technology 213, 1284-1302. IF: 3.147; Citation: 114
https://doi.org/10.1016/j.jmatprotec.2013.03.001
10. Yanshan Lou, Hoon Huh*, Jeong Whan Yoon, 2013. Consideration of strength differential effect in sheet metals with symmetric yield function. International Journal of Mechanical Science 66, 214-223. IF: 2.884; Citation: 39
https://doi.org/10.1016/j.ijmecsci.2012.11.010
11. Yanshan Lou, Jeong Whan Yoon*, Hoon Huh, Qi Chao, Jung-Han Song, 2018. Correlation of the maximum shear stress with micromechanisms of ductile fracture for metals with high strength-to-weight ratio. International Journal of Mechanical Science
https://doi.org/10.1016/j.ijmecsci.2018.03.025
12. Yanshan Lou, Hoon Huh*, 2013. Evaluation of ductile fracture criteria in a general three-dimensional stress state considering the stress triaxiality and the Lode parameter. Acta Mechanica Solida Sinica 26, 642-658. IF: 1.149; Citation: 39
https://doi.org/10.1016/S0894-9166(14)60008-2
13. Yanshan Lou, Sungjun Lim, Hoon Huh*, 2013. Prediction of fracture forming limit of DP780 steel sheet. Metals and Materials International 19, 697-705.
14. Xinke Xiao*, Zhongcheng Mu, Hao Pan, Yanshan Lou, 2018. Effect of the Lode parameter in predicting shear cracking of 2024-T351 aluminum alloy Taylor rods. International Journal of Impact Engineering 120, 185-201. IF: 3.344;
15. Keunhwan Pack, Kwanghyun Ahn, Hoon Huh*, Yanshan Lou, 2014. Fracture modeling of DP780 sheets using a hybrid experimental-numerical method and two dimensional digital image correlation. International Journal of Materials and Product Technology 48, 34-46. IF: 0.365; Citation: 3
16. Guoqiang Wang, Xiaolei Qian, Xvefei Li, Haijing Hou, Yi Liu, Yanshan Lou*, 2014. A study on compressive anisotropic and non-associated flow plasticity of the AZ31 magnesium alloy in hot rolling. Mathematical Problems in Engineering Article ID 256194. IF: 0.802;
17. Hailiang Yu*, Kiet Tieu, Cheng Lu, Yanshan Lou, Xianghua Liu, Ajit Godbole, Charlie Kong, 2014. Tensile fracture of ultrafine grained Al 6061 sheets by asymmetric cryorolling. International Journal of Damage Mechanics 23, 1077-1095. IF: 1.783; Citation: 25
※ International Conference publications / 国际会议
1. Yanshan Lou, Jin Sung Kim, Hoon Huh,
2. Changsoo Lee, Gihyun Bae, Seokbong Kim, Yanshan Lou, Hoon Huh. Construction of the Hill48 and Yld89 for auto-body steel sheets considering the strain rate. 4th International Conference on High Speed Forming, 2010, pp. 307-317.
3. Hoon Huh, Yanshan Lou, Gihyun Bae, Changsoo Lee. Accuracy analysis of anisotropic yield functions based on the root-mean square error. Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes Dedicated to Professor O. C. Zienkiewicz (1921-2009). AIP Conference Proceedings, Volume 1252, 2010, pp. 739-746.
4. Yanshan Lou, Gihyun Bae, Changsoo Lee, Hoon Huh. Effect of the yield stress and r-value distribution on the earing profile of cup drawing with Yld2000-2d yield function. Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes Dedicated to Professor O. C. Zienkiewicz (1921-2009). AIP Conference Proceedings, Volume 1252, 2010, pp. 375-382.
5. Yanshan Lou, Seokbong Kim, Changsoo Lee, Hoon Huh. Prediction of forming limit diagrams of DP590 steel based on the M-K model with experimental verification. AEPA’2010, pp. 59-63, 2010.
7. Yanshan Lou, Hoon Huh, Gihyun Bae, Seokbong Kim, Younki Ko. Limit dome height prediction based on a new ductile fracture criterion. ICTP’2011, pp. 951-956, 2011.
8. Yanshan Lou, Hoon Huh. Prediction of ductile fracture with a new ductile fracture criterion: experiments and simulation. IDDRG’2012.
9. Yanshan Lou, Hoon Huh. Ductile fracture of dual phase steel: mechanisms, modeling, prediction and prospective applications. Forming Technology Forum’2012.
10. Keunhwan Pack, Kwanghyun Ahn, Hoon Huh, Yanshan Lou. Fracture modeling of DP780 sheets using a hybrid experimental-numerical method and two dimensional digital image correlation. AMPT, 2012.
11. Yanshan Lou, Jeong Whan Yoon, Thomas B. Stoughton, 2013. Linear transformation based anisotropic yield function in full stress spaces for metals with intermediate orthotropy. ESAFORM’2013,
12. Yanshan Lou, Jeong Whan Yoon, Hoon Huh, 2014. Modeling of shear ductile fracture considering a changeable cut-off value for the stress triaxiality. NUMISHEET’2014,
13. Yanshan Lou, Jeong Whan Yoon, 2015. Anisotropic behavior in plasticity and ductile fracture of an aluminum alloy. ESAFORM’2015,
14. Yanshan Lou, Lin Chen, Till Clausmeyer, Tobias R. Ortelt, Hui Chen, A. Erman Tekkaya, 2015. Anisotropic ductile fracture behavior of an aluminum alloy. ICDM2,
15. Yanshan Lou, Jeong Whan Yoon, 2016. A shear ductile fracture criterion for metal forming. NUMISHEET’2016, Bristol, UK.
16. Yanshan Lou, Jeong Whan Yoon, 2017. Linear transformation based orthotropic shear ductile fracture criterion for lightweight metals. ESAFORM’2017, Dublin, Ireland.
17. Shunying Zhang, Jeong Whan Yoon, Sunguk Lee, Yanshan Lou, 2017. Shape optimization of shear fracture specimen considering plastic anisotropy. ESAFORM’2017, Dublin, Ireland.
18. Yanshan Lou, Jeong Whan Yoon, 2017. J2-J3 based anisotropic yield function under spatial loading. ICTP’2017, Cambridge, UK.
19. Saijun Zhang, Yanshan Lou, Jeong Whan Yoon, 2017. Finite element formulation of a general asymmetrical yield function for pressure sensitive metals. ICTP’2017, Cambridge, UK.
20. Adrien Pradeau, Jeong Whan Yoon, Sandrine Thuillier, Yanshan Lou, Shunying Zhang, 2018. Rupture model based on non-associated plasticity. ESAFORM 2018, AIP Conference Proceedings 1960, 090011.
21. Saijun Zhang, Yanshan Lou, Jeong Whan Yoon, 2018. Earing prediction of AA2008-T4 with anisotropic Drucker yield function based on the second and third stress invariants. NUMISHEET 2018, Journal of Physics 1063, 012113.
22. Robert E. Dick, Yanshan Lou, Shunying Zhang, Jeong Whan Yoon, 2018. Material characterization and fracture prediction with advanced constitutive model and Polar EPS fracture diagram for AA 3104-H19. NUMISHEET 2018, Journal of Physics 1063, 012156.
23. Yanshan Lou, Jeong Whan Yoon, 2018. Extension of the DF2016 isotropic model into an anisotropic ductile fracture criterion. NUMISHEET 2018, Journal of Physics 1063, 012148.
(创新港)
