电话： 029-82665581
传真： +86-29-82663502
邮编： 710049
email： zengmin@mail.xjtu.edu.cn
地址： 陕西省西安市咸宁西路28号
新一代传热技术与新型换热设备研究组
《A HEAT TRANSFER TEXTBOOK: A free
electronic textbook》 下载1 下载2 本地下载
科学研究 - 曾 敏
-
2009-10-27
-
2009-10-19
-
2008-11-04
-
2008-07-05
-
2008-06-15
-
新一代传热技术与节能理论
主要研究内容：新一代传热技术的机理研究；特殊及极端条件下的过程强化技术；复杂流动与传热问题的数值模拟及工程应用；外场（如磁场、电场等）力作用下对流换热的控制规律及其应用；特殊结构的新型冷却技术开发；多孔介质传热传质机理；新型测试技术在复杂表面传热机理研究中的应用等。
新型高效换热设备的研究与开发
主要研究内容：新一代传热技术在换热设备中的应用研究；新型高效换热设备的优化设计及研发；以原表面为代表的微型燃机回热器核心技术研究；新型材料换热设备的研究与开发；工业设备中全流场的模拟计算研究等。
主要研究内容：新一代传热技术的机理研究；特殊及极端条件下的过程强化技术；复杂流动与传热问题的数值模拟及工程应用；外场（如磁场、电场等）力作用下对流换热的控制规律及其应用；特殊结构的新型冷却技术开发；多孔介质传热传质机理；新型测试技术在复杂表面传热机理研究中的应用等。
新型高效换热设备的研究与开发
主要研究内容：新一代传热技术在换热设备中的应用研究；新型高效换热设备的优化设计及研发；以原表面为代表的微型燃机回热器核心技术研究；新型材料换热设备的研究与开发；工业设备中全流场的模拟计算研究等。
| 项目编号 | 项目名称 | 项目来源 | 起讫时间 | 承担角色 | 项目类别 |
|---|---|---|---|---|---|
| 51276139 | 高温条件下换热单元流动/传热/应力耦合及强化传热机理研究 | 国家自然科学基金项目 | 2013-1~ | 负责人 | 纵向项目 |
| xxxxxx | ***系统 | 国防973专题 | 2012-1~ | 负责人 | 纵向项目 |
| 50876113 | 现代防暴水炮中的脉冲射流动力过程及雾化机理研究 | 国家自然科学基金项目 | 2009-1~ | 负责人 | 纵向项目 |
| 50576089 | 基于Dufour和Soret效应的多孔介质内热质传递机理研究 | 国家自然科学基金项目 | 2009-1~ | 负责人 | 纵向项目 |
著 作
1 王秋旺，曾敏. 《传热学要点与解题》，30.3万字，西安交通大学出版社，2006，8
国际杂志
2013年
1 Min Zeng, Peng Yu, Feng Xu, Qiuwang Wang. Natural convection in triangular attics filled with porous medium heated from below. Numerical Heat Transfer, Part A: Applications, 2013, 63(10):735-754.
2 X.P. Du, M. Zeng, Q.W. Wang, Z.Y. Dong, Experimental investigation of heat transfer and resistance characteristics of a finned oval-tube heat exchanger with different air inlet angles, Heat Transfer Engineering, (Accepted)
3 X.Y. Xu, M. Zeng, X. Yan, H.B. Zhu, Q.W. Wang.Numerical simulation and comparison of turbulent heat transfer in supercritical and subcritical water, Progress in Computational Fluid Dynamics, 2013,13(3-4):145-155.
4 Min Zeng, Ting Ma, Bengt Sundén, Mohamed B. Trabia, Qiuwang Wang. Effect of lateral fin profiles on stress performance of internally finned tubes in a high temperature heat exchanger. Applied Thermal Engineering, 2013, 50(1):886-895. (SCI:079RY, EI:20125015803169)
2012年
5 Min Zeng, Jinliang Yuan, Jian Zhang, Bengt Sundén, Qiuwang Wang. Investigation of thermal radiation effects on solid oxide fuel cell performance by a comprehensive model. Journal of Power Sources, 2012, 206:185-196 (SCI:925IR, EI: 20121114846866, IF=4.283)
6 Min Yan, Min Zeng, Qiuyang Chen, Qiuwang Wang. Numerical study on carbon deposition of SOFC with unsteady state variation of porosity. Applied Energy, 2012, 97:754-762. (SCI:984NC, EI:20122515138872)
7 Jin Wang, Bengt Sundén, Min Zeng, Qiu-wang Wang. Influence of different rim widths and blowing ratios on film cooling characteristics for a blade tip, ASME Journal of Heat Transfer,2012, 134:0601701-1
8 Ting Ma, Yi-tung Chen, Min Zeng, Qiu-wang Wang. Stress analysis of internally finned bayonet tube in a high temperature heat exchanger, Applied Thermal Engineering, 2012, 43:101-108 (SCI:960BX, EI:20122415103517, IF=1.823)
9 M.Zeng,L.X. Du, D. Liao,W.X. Chu et al. Investigation on pressure drop and heat transfer performances of plate-fin iron air preheater unit with experimental and Genetic Algorithm methods. Applied Energy, 2012, 92：725-732 (SCI:894YQ, EI:20120114663970, IF=3.915)
2011年
10 G.D. Chen, M. Zeng, Q.W. Wang, Experimental and numerical studies on shell-side performance of three different shell-and-tube heat exchangers with helical baffles, Journal of Enhanced Heat Transfer, 2011, 18(5):449-463 (EI:853QO,EI:20114614524128)
11 T. Ma, M. Zeng, Y.P.Ji, Q.W.Wang, CFD Optimization of Gas-side Flow Channel Configuration Inside a High Temperature Bayonet Tube Heat Exchanger with Inner and Outer fins, ASME Journal of Engineering for Gas Turbines and Power, 2011, 133(12): 122301 (SCI: 820MV, EI: 20113814336203)
12 Zeng M, Xue F, Zhu HB,Wang QW, Zhan RJ. Numerical Simulation of Unsteady 3D Air-Water Turbulent Flow in a Water Cannon, Progress in Computational Fluid Dynamics,2011,11(3-4):189-196 (SCI:797KU, EI:20112714119352)
13 Ting Ma, Min Zeng, Yanpeng Ji, Haibin Zhu, Qiuwang Wang，Investigation of a novel bayonet tube high temperature heat exchanger with inner and outer fins，International Journal of Hydrogen Energy , 2011, 36(5):3757-3768 (SCI:740ZT, EI: 20111013721952)
14 G. Wang, M. Zeng, Y.C. Ren, H. Ozoe, Q.W. Wang. Transient heat flux measurement of natural convection in an inclined enclosure with time-periodically-varying wall temperature, Experimental Thermal and Fluid Science,2011,35(1):105-111 (SCI: 689ZF ,EI: 20104513361732)
2010年
15 M. Zeng, L.H.Tang, M.Lin, Q.W.Wang. Optimization of heat exchangers with vortex- generator fin by Taguchi method, Applied ThermalEngineering,2010,30(13):1775-1783
(SCI:625PP, EI: 20103213126867)
16 Chen QY, Zeng M, Zhang J, Wang QW, Optimal design of bi-layer interconnector for SOFC based on CFD-Taguchi method, International Journal of Hydrogen Energy , 2010, 35(9) :4292-4300
(SCI: 598SD, EI: 20101412824953)
17 Yang J, Zeng M, Wang QW, Nakayama A. Forced convection heat transfer enhancement by porous pin fins in rectangular channels. ASME Journal of Heat Transfer, 2010, 132(5): 051702.
(SCI:566SJ，EI：20103213134351)
18 Yang J, Wang QW, Zeng M, Nakayama A. Computational study of forced convective heat transfer in structured packed beds with spherical or ellipsoidal particles. Chemical Engineering Science, 2010, 65(2): 726-738.
(SCI：577FE，EI: 20095112563290)
19 Wang QW, Yang J, Zeng M, Wang G. Three-dimensional numerical study of natural convection in an inclined porous cavity with time sinusoidal oscillating boundary conditions. International Journal of Heat and Fluid flow, 2010, 31(1): 70-82.
(SCI: 558CV，EI: 20100212625521)
2009年
20 Min Zeng, Qiu-wang Wang, Hiroyuki Ozoe, Gang Wang, Zi-peng Huang, Natural convection of diamagnetic fluid in an enclosure filled with porous medium under magnetic field, Progress in Computational Fluid Dynamics, 2009,9(2): 77-85
(SCI: 424VV, EI: 20092912196406)
21 Linghong Tang, Min Zeng, Gongnan Xie, Qiuwang Wang, Fin Pattern Effects on Air-Side Heat Transfer and Friction Characteristics of Fin-and-Tube Heat Exchangers with Large Number of Large-Diameter Tube Rows, Heat Transfer Engineering,2009, 30(3):171–180 (SCI: 360HJ, EI: 084311654461)
22 Linhong Tang, Min Zeng, Qiuwang Wang. Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns, Experimental Thermal and Fluid Science, 2009,33(5):818-827
(SCI460HF, EI: 20092212095757)
23 Wang Qiu-wang, Lin Mei, Zeng Min. Effect of Lateral Fin Profiles on Turbulent Flow and Heat Transfer Performance of Internally Finned Tubes, Applied Thermal Engineering, 2009,29(14-15):3006-3013
24 Qiuwang Wang, Qiuyang Chen, Min Zeng, A Taguchi Approach for Numerical Investigation of Natural Convection Cooling Performance of Air-core Reactor with Noise Reducing Cover, Numerical Heat Transfer Part A: Applications, 2009, 55(12) : 1116-1130 (SCI:457GZ, EI: 20093112235079)
2008年
25 Dahai Zhang, Qiuwang Wang, Min Zeng, Lu Sun. Numerical research on influence of different slot configurations on film cooling characteristics, Progress in Computational Fluid Dynamics, 2008 ,8(7/8): 518-525, (SCI: 378PH and EI: 084911765758)
26 Qiuwang Wang, Mei Lin, Min Zeng, Lin Tian. Computational Analysis of Heat Transfer and Pressure Drop Performance for Internally Finned Tubes with Three Different Longitudinal Wavy Fins, Heat and Mass Transfer, 2008, 45: 147-156
(SCI: 359SH and EI: 084311659941)
27 Wang Qiu-Wang,Zhao Cun-Lu, Zeng Min, Wu Yi-Ning.Numerical investigation of rarefied diatomic gas flow and heat transfer in a microchannel using DSMC with uniform heat flux boundary condition - Part I: Numerical method and validation,Numerical Heat Transfer, Part B: Fundamentals, 2008,53(2):160-173 2008年2月
(SCI: 251DS and EI: 075210991182)
28 Wang Qiu-Wang,Zhao Cun-Lu,Zeng Min, Wu Yi-Ning.Numerical investigation of rarefied diatomic gas flow and heat transfer in a microchannel using DSMC with uniform heat flux boundary condition - Part II: Applications,Numerical Heat Transfer, Part B: Fundamentals, 2008,53(2):174-187 2008年2月
(SCI: 251DS and EI: 075210991182)
29 Q.W. Wang, D.J. Zhang, M. Zeng, M. Lin, L. H. Tang, CFD simulation on a thermal power plant with air-cooled heat exchanger system in north China. Engineering Computations, 2008, 25(4): 342-365 2008年4月
(SCI: 315TI, EI: 082211278834)
30 Qiu-Wang Wang, Mei Lin, Min Zeng, Lin Tian, Investigation of Turbulent Flow and Heat Transfer in Periodic Wavy Channel of Internally Finned Tube with Blocked Core-Tube, ASME J Heat Transfer, 130(6), Article Number: 061801, 2008 6月
(SCI: 308PZ and EI: 082811356747)
31 Wang Qiu-wang, Lin Mei, Zeng Min. Effect of blocked core-tube diameter on heat transfer performance of internally longitudinal finned tubes, Heat Transfer Engineering ,2008, 29(1):107-115 1月
(SCI: 252OO and EI: 080511064248)
32 Gang Wang, Qiuwang Wang, Min Zeng, Hiroyuki Ozoe,Numerical study of natural convection heat transfer in an inclined porous cavity with time-periodic boundary conditions,Transport in porous media, 2008，74(3): 293-309 3月
(SCI: 338ZR and EI: 083611499717)
33 Gang Wang, Qiuwang Wang, Min Zeng, Hiroyuki Ozoe, Natural convection heat transfer in an inclined porous cavity under time-periodic boundary conditions with positive/negative angles, Journal of porous media, , 2008,11(6): 541-555 6月
(SCI: 296CK and EI: 081911241881)
34 Qiu-Wang WANG, Gang WANG, Min ZENG and Hiroyuki OZOE, Uni-directional heat flux through the horizontal fluid layer with sinusoidal wall temperature at the top or bottom boundaries, Int. J Heat Mass Transfer , 2008，51（7－8）:1675-1682 4月
(SCI: 284SK, EI: 080911126999)
2007年
35 Min Zeng, Qiu-wang Wang, Zi-peng Huang, Gang Wang, Hiroyuki Ozoe. Numerical investigation of natural convection in an enclosure filled with porous medium under magnetic field，Numerical Heat Transfer, Part A, Applications，2007，52（10）：959-971 (SCI: 210XX and EI:073910837733) 他引7次 20111107
36 Qiu-wang Wang, Min Zeng, Zi-peng Huang, Gang Wang, Hiroyuki Ozoe. Numerical investigation of natural convection in an inclined enclosure filled with porous medium under magnetic field，Int. J Heat Mass Transfer , 2007, 50(17-18): 3684-3689
(SCI: 179KI and EI: 071810584105) 他引12次 20111107
37 Xie Gong-Nan, Wang Qiu-Wang, Zeng Min, Luo Lai-Qin. Numerical Investigation of Heat Transfer and Fluid Flow Characteristics Inside a Wavy Channel, Heat and Mass Transfer , 2007 , 43(7): 603-611
(SCI: 151MK and EI: 072010599645)
38 Xie Gong-Nan, Wang Qiu-Wang, Zeng Min, Luo Lai-Qin. Heat transfer analysis for shell-and-tube heat exchangers with experimental data by artificial neural networks approach, Applied Thermal Engineering， 2007,27:1096-1104
(SCI: 136AX and EI: 065110316547)
39 Qiu-Wang WANG, Gang WANG, Min ZENG and Hiroyuki OZOE, Upward heat flux through the horizontal fluid layer of water with sinusoidal wall temperature at the top or bottom boundaries, Numerical Heat Transfer, Part A, Applications ,2007, 52 (9): 817-829 (SCI: 210XW and EI: 073910837736)
2006年以前
40 Qiuwang Wang, Feng Wu, Min Zeng, Laiqin Luo and Jiguo Sun. Numerical simulation and optimization on heat transfer and fluid flow in cooling channel of liquid rocket engine thrust chamber. Engineering Computations, 2006,v 23, n 8 p.907-921
(SCI: 116NB EI: 064610232459)
41 Wang, Qiuwang Xie, Gongnan; Zeng, Min; Luo, Laiqin. Prediction of heat transfer rates for shell-and-tube heat exchangers by artificial neural networks approach. Journal of Thermal Science, v 15, n 3, September, 2006, p 257-262
(EI:064310201184 )
42 Zeng M. , Tao W.Q. Numerical verification of the field synergy principle for turbulent flow. Journal of Enhanced Heat Transfer 2004，11（4）：453-459
(SCI: 883SR)
43 Zeng M.，Tao W.Q. A comparison study of the convergence characteristics for four variants of SIMPLE–family at fine grids. Engineering Computations, 2003,v 20, n 3 p.320-340 (SCI: 861FB and EI: 03277524153)
1 Min Zeng, Peng Yu, Feng Xu, Qiuwang Wang. Natural convection in triangular attics filled with porous medium heated from below. Numerical Heat Transfer, Part A: Applications, 2013, 63(10):735-754.
2 X.P. Du, M. Zeng, Q.W. Wang, Z.Y. Dong, Experimental investigation of heat transfer and resistance characteristics of a finned oval-tube heat exchanger with different air inlet angles, Heat Transfer Engineering, (Accepted)
3 X.Y. Xu, M. Zeng, X. Yan, H.B. Zhu, Q.W. Wang.Numerical simulation and comparison of turbulent heat transfer in supercritical and subcritical water, Progress in Computational Fluid Dynamics, 2013,13(3-4):145-155.
4 Min Zeng, Ting Ma, Bengt Sundén, Mohamed B. Trabia, Qiuwang Wang. Effect of lateral fin profiles on stress performance of internally finned tubes in a high temperature heat exchanger. Applied Thermal Engineering, 2013, 50(1):886-895. (SCI:079RY, EI:20125015803169)
2012年
5 Min Zeng, Jinliang Yuan, Jian Zhang, Bengt Sundén, Qiuwang Wang. Investigation of thermal radiation effects on solid oxide fuel cell performance by a comprehensive model. Journal of Power Sources, 2012, 206:185-196 (SCI:925IR, EI: 20121114846866, IF=4.283)
6 Min Yan, Min Zeng, Qiuyang Chen, Qiuwang Wang. Numerical study on carbon deposition of SOFC with unsteady state variation of porosity. Applied Energy, 2012, 97:754-762. (SCI:984NC, EI:20122515138872)
7 Jin Wang, Bengt Sundén, Min Zeng, Qiu-wang Wang. Influence of different rim widths and blowing ratios on film cooling characteristics for a blade tip, ASME Journal of Heat Transfer,2012, 134:0601701-1
8 Ting Ma, Yi-tung Chen, Min Zeng, Qiu-wang Wang. Stress analysis of internally finned bayonet tube in a high temperature heat exchanger, Applied Thermal Engineering, 2012, 43:101-108 (SCI:960BX, EI:20122415103517, IF=1.823)
9 M.Zeng,L.X. Du, D. Liao,W.X. Chu et al. Investigation on pressure drop and heat transfer performances of plate-fin iron air preheater unit with experimental and Genetic Algorithm methods. Applied Energy, 2012, 92：725-732 (SCI:894YQ, EI:20120114663970, IF=3.915)
2011年
10 G.D. Chen, M. Zeng, Q.W. Wang, Experimental and numerical studies on shell-side performance of three different shell-and-tube heat exchangers with helical baffles, Journal of Enhanced Heat Transfer, 2011, 18(5):449-463 (EI:853QO,EI:20114614524128)
11 T. Ma, M. Zeng, Y.P.Ji, Q.W.Wang, CFD Optimization of Gas-side Flow Channel Configuration Inside a High Temperature Bayonet Tube Heat Exchanger with Inner and Outer fins, ASME Journal of Engineering for Gas Turbines and Power, 2011, 133(12): 122301 (SCI: 820MV, EI: 20113814336203)
12 Zeng M, Xue F, Zhu HB,Wang QW, Zhan RJ. Numerical Simulation of Unsteady 3D Air-Water Turbulent Flow in a Water Cannon, Progress in Computational Fluid Dynamics,2011,11(3-4):189-196 (SCI:797KU, EI:20112714119352)
13 Ting Ma, Min Zeng, Yanpeng Ji, Haibin Zhu, Qiuwang Wang，Investigation of a novel bayonet tube high temperature heat exchanger with inner and outer fins，International Journal of Hydrogen Energy , 2011, 36(5):3757-3768 (SCI:740ZT, EI: 20111013721952)
14 G. Wang, M. Zeng, Y.C. Ren, H. Ozoe, Q.W. Wang. Transient heat flux measurement of natural convection in an inclined enclosure with time-periodically-varying wall temperature, Experimental Thermal and Fluid Science,2011,35(1):105-111 (SCI: 689ZF ,EI: 20104513361732)
2010年
15 M. Zeng, L.H.Tang, M.Lin, Q.W.Wang. Optimization of heat exchangers with vortex- generator fin by Taguchi method, Applied ThermalEngineering,2010,30(13):1775-1783
(SCI:625PP, EI: 20103213126867)
16 Chen QY, Zeng M, Zhang J, Wang QW, Optimal design of bi-layer interconnector for SOFC based on CFD-Taguchi method, International Journal of Hydrogen Energy , 2010, 35(9) :4292-4300
(SCI: 598SD, EI: 20101412824953)
17 Yang J, Zeng M, Wang QW, Nakayama A. Forced convection heat transfer enhancement by porous pin fins in rectangular channels. ASME Journal of Heat Transfer, 2010, 132(5): 051702.
(SCI:566SJ，EI：20103213134351)
18 Yang J, Wang QW, Zeng M, Nakayama A. Computational study of forced convective heat transfer in structured packed beds with spherical or ellipsoidal particles. Chemical Engineering Science, 2010, 65(2): 726-738.
(SCI：577FE，EI: 20095112563290)
19 Wang QW, Yang J, Zeng M, Wang G. Three-dimensional numerical study of natural convection in an inclined porous cavity with time sinusoidal oscillating boundary conditions. International Journal of Heat and Fluid flow, 2010, 31(1): 70-82.
(SCI: 558CV，EI: 20100212625521)
2009年
20 Min Zeng, Qiu-wang Wang, Hiroyuki Ozoe, Gang Wang, Zi-peng Huang, Natural convection of diamagnetic fluid in an enclosure filled with porous medium under magnetic field, Progress in Computational Fluid Dynamics, 2009,9(2): 77-85
(SCI: 424VV, EI: 20092912196406)
21 Linghong Tang, Min Zeng, Gongnan Xie, Qiuwang Wang, Fin Pattern Effects on Air-Side Heat Transfer and Friction Characteristics of Fin-and-Tube Heat Exchangers with Large Number of Large-Diameter Tube Rows, Heat Transfer Engineering,2009, 30(3):171–180 (SCI: 360HJ, EI: 084311654461)
22 Linhong Tang, Min Zeng, Qiuwang Wang. Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns, Experimental Thermal and Fluid Science, 2009,33(5):818-827
(SCI460HF, EI: 20092212095757)
23 Wang Qiu-wang, Lin Mei, Zeng Min. Effect of Lateral Fin Profiles on Turbulent Flow and Heat Transfer Performance of Internally Finned Tubes, Applied Thermal Engineering, 2009,29(14-15):3006-3013
24 Qiuwang Wang, Qiuyang Chen, Min Zeng, A Taguchi Approach for Numerical Investigation of Natural Convection Cooling Performance of Air-core Reactor with Noise Reducing Cover, Numerical Heat Transfer Part A: Applications, 2009, 55(12) : 1116-1130 (SCI:457GZ, EI: 20093112235079)
2008年
25 Dahai Zhang, Qiuwang Wang, Min Zeng, Lu Sun. Numerical research on influence of different slot configurations on film cooling characteristics, Progress in Computational Fluid Dynamics, 2008 ,8(7/8): 518-525, (SCI: 378PH and EI: 084911765758)
26 Qiuwang Wang, Mei Lin, Min Zeng, Lin Tian. Computational Analysis of Heat Transfer and Pressure Drop Performance for Internally Finned Tubes with Three Different Longitudinal Wavy Fins, Heat and Mass Transfer, 2008, 45: 147-156
(SCI: 359SH and EI: 084311659941)
27 Wang Qiu-Wang,Zhao Cun-Lu, Zeng Min, Wu Yi-Ning.Numerical investigation of rarefied diatomic gas flow and heat transfer in a microchannel using DSMC with uniform heat flux boundary condition - Part I: Numerical method and validation,Numerical Heat Transfer, Part B: Fundamentals, 2008,53(2):160-173 2008年2月
(SCI: 251DS and EI: 075210991182)
28 Wang Qiu-Wang,Zhao Cun-Lu,Zeng Min, Wu Yi-Ning.Numerical investigation of rarefied diatomic gas flow and heat transfer in a microchannel using DSMC with uniform heat flux boundary condition - Part II: Applications,Numerical Heat Transfer, Part B: Fundamentals, 2008,53(2):174-187 2008年2月
(SCI: 251DS and EI: 075210991182)
29 Q.W. Wang, D.J. Zhang, M. Zeng, M. Lin, L. H. Tang, CFD simulation on a thermal power plant with air-cooled heat exchanger system in north China. Engineering Computations, 2008, 25(4): 342-365 2008年4月
(SCI: 315TI, EI: 082211278834)
30 Qiu-Wang Wang, Mei Lin, Min Zeng, Lin Tian, Investigation of Turbulent Flow and Heat Transfer in Periodic Wavy Channel of Internally Finned Tube with Blocked Core-Tube, ASME J Heat Transfer, 130(6), Article Number: 061801, 2008 6月
(SCI: 308PZ and EI: 082811356747)
31 Wang Qiu-wang, Lin Mei, Zeng Min. Effect of blocked core-tube diameter on heat transfer performance of internally longitudinal finned tubes, Heat Transfer Engineering ,2008, 29(1):107-115 1月
(SCI: 252OO and EI: 080511064248)
32 Gang Wang, Qiuwang Wang, Min Zeng, Hiroyuki Ozoe,Numerical study of natural convection heat transfer in an inclined porous cavity with time-periodic boundary conditions,Transport in porous media, 2008，74(3): 293-309 3月
(SCI: 338ZR and EI: 083611499717)
33 Gang Wang, Qiuwang Wang, Min Zeng, Hiroyuki Ozoe, Natural convection heat transfer in an inclined porous cavity under time-periodic boundary conditions with positive/negative angles, Journal of porous media, , 2008,11(6): 541-555 6月
(SCI: 296CK and EI: 081911241881)
34 Qiu-Wang WANG, Gang WANG, Min ZENG and Hiroyuki OZOE, Uni-directional heat flux through the horizontal fluid layer with sinusoidal wall temperature at the top or bottom boundaries, Int. J Heat Mass Transfer , 2008，51（7－8）:1675-1682 4月
(SCI: 284SK, EI: 080911126999)
2007年
35 Min Zeng, Qiu-wang Wang, Zi-peng Huang, Gang Wang, Hiroyuki Ozoe. Numerical investigation of natural convection in an enclosure filled with porous medium under magnetic field，Numerical Heat Transfer, Part A, Applications，2007，52（10）：959-971 (SCI: 210XX and EI:073910837733) 他引7次 20111107
36 Qiu-wang Wang, Min Zeng, Zi-peng Huang, Gang Wang, Hiroyuki Ozoe. Numerical investigation of natural convection in an inclined enclosure filled with porous medium under magnetic field，Int. J Heat Mass Transfer , 2007, 50(17-18): 3684-3689
(SCI: 179KI and EI: 071810584105) 他引12次 20111107
37 Xie Gong-Nan, Wang Qiu-Wang, Zeng Min, Luo Lai-Qin. Numerical Investigation of Heat Transfer and Fluid Flow Characteristics Inside a Wavy Channel, Heat and Mass Transfer , 2007 , 43(7): 603-611
(SCI: 151MK and EI: 072010599645)
38 Xie Gong-Nan, Wang Qiu-Wang, Zeng Min, Luo Lai-Qin. Heat transfer analysis for shell-and-tube heat exchangers with experimental data by artificial neural networks approach, Applied Thermal Engineering， 2007,27:1096-1104
(SCI: 136AX and EI: 065110316547)
39 Qiu-Wang WANG, Gang WANG, Min ZENG and Hiroyuki OZOE, Upward heat flux through the horizontal fluid layer of water with sinusoidal wall temperature at the top or bottom boundaries, Numerical Heat Transfer, Part A, Applications ,2007, 52 (9): 817-829 (SCI: 210XW and EI: 073910837736)
2006年以前
40 Qiuwang Wang, Feng Wu, Min Zeng, Laiqin Luo and Jiguo Sun. Numerical simulation and optimization on heat transfer and fluid flow in cooling channel of liquid rocket engine thrust chamber. Engineering Computations, 2006,v 23, n 8 p.907-921
(SCI: 116NB EI: 064610232459)
41 Wang, Qiuwang Xie, Gongnan; Zeng, Min; Luo, Laiqin. Prediction of heat transfer rates for shell-and-tube heat exchangers by artificial neural networks approach. Journal of Thermal Science, v 15, n 3, September, 2006, p 257-262
(EI:064310201184 )
42 Zeng M. , Tao W.Q. Numerical verification of the field synergy principle for turbulent flow. Journal of Enhanced Heat Transfer 2004，11（4）：453-459
(SCI: 883SR)
43 Zeng M.，Tao W.Q. A comparison study of the convergence characteristics for four variants of SIMPLE–family at fine grids. Engineering Computations, 2003,v 20, n 3 p.320-340 (SCI: 861FB and EI: 03277524153)
发明专利
1. 王秋旺，贺群武，罗来勤，曾敏，钟文凯，杨小明，一种管壳式换热器，专利号：ZL2003 10105835.5，授予日期：2006年11月8日
2. 王秋旺，梁红侠，罗来勤，曾敏，吴一宁，丰镇平，一种适用于微型燃气轮机的原表面回热器，专利号：ZL 200510042727.7，授予日期：2007年5月30日
3. 王秋旺，张冬洁，王士元，罗来勤，曾敏，吴一宁，一种焊接单元组片和由其组成原表面回热器芯体的方法，专利号：ZL 200510041940.6，授予日期：2007年7月25日
4. 王秋旺，张冬洁，曾敏，罗来勤，吴一宁，一种新风换气机用原表面换热器，专利号：ZL 200510042697.X，授予日期：2007年11月28日
5. 王秋旺，陈秋炀，彭波涛，曾敏，罗来勤，吴一宁，一种连续螺旋折流板管壳式换热器，专利号：ZL 200510043033.5，授予日期：2008年1月30日
6. 王秋旺、陈秋炀、曾敏、吴一宁、罗来勤，一种多壳程螺旋折流板管壳式换热器，专利号：200610041949.1，授予日期：2008年5月7日
7. 王秋旺，张冬洁，曾敏，吴一宁，王士元. 一种微型燃气轮机用环形原表面回热器加工工艺，专利号：200610104725.0，授予日期：2008年7月16日
8. 王秋旺，张冬洁，曾敏，吴一宁，组合螺旋折流板管壳式换热器，专利号：200710017395.6，授予日期：2009年1月21日
9. 王秋旺, 陈秋炀, 曾敏, 吴一宁, 高强, 一种组合式多壳程螺旋折流板管壳式换热器，专利号：200710017478.5，授予日期：2008年11月19日
10. 王秋旺, 章大海，陈秋炀, 曾敏, 一种开槽气膜冷却孔，专利号：200710017790.4，授权通知：2009年1月16日
11. Qiuwang Wang, Qiuyang Chen, Dongjie Zhang, Min Zeng, Yining Wu, Qiang Gao. A Single Shell-Pass or Multiple Shell-Pass Shell-and-Tube Heat Exchanger with Helical Baffles, 专利号：US7740057，授权通知日期20100408
(创新港)
