英文专著章节

[1] Z.G. Qu, H.J. Xu, T.S. Wang, W.Q. Tao, T.J. Lu. Thermal transport in metallic porous media (Chapter 8), Heat Transfer – Engineering Application, edited by Vyacheslav S. Vikhrenko. ISBN 979-953-307-656-9, Intech Publisher.

[2] Z. Liu, J. Hu, Z.G. Qu, F. Xu, Paper-based immunoassays (Chapter 8), Handbook of ImmunoassayTechnologies: Approaches, Performances, and Applications. edited by S. Vashist, J. Luong. ISBN:9780128117620. San Diego, California: Academic Press; 2018.

授权专利

没有找到条目。
专利名称 申请号 专利类型 申请日期
基于吸附材料的热驱离子电渗水-电联产装置与方法 202210560406.X 发明 2022.05.19
一种燃料电池余热利用系统 202210267238.5 发明 2022.05.17
静电收水型冷却塔 202111259381.1 发明 2021.10.27
耦合催化层结块的质子交换膜燃料电池建模方法 202111200589.6 发明 2021.10.14
冷媒循环流量自适应调节系统 202111190571.2 发明 2021.10.12
基于太阳能的锅炉烟气处理系统及方法 202111167907.3 发明 2021.09.29
一种基于双动力驱动强化传热的重力热管 202110740054.1 发明 2021.06.30
管式空气预热器能效的定量评价方法 202011324698.4 发明 2020.11.23
Solar electroosmosis power generation device 201911321802.1 发明 2020.10.01
一种多通道的消雾节水装置及冷却塔 2020105322365 发明 2020.06.11
波浪能和太阳能耦合离子电渗发电装置及发电方法 202010343213X 发明 2020.04.27
太阳能光驱离子电渗发电和光热蒸发海水淡化耦合装置 202010343212.5 发明 2020.04.27
基于离子风的污泥干燥系统及干燥方法 2019113239437 发明 2019.12.19
全预混冷凝式燃气换热设备及换热方法 201910714834.1 发明 2019.08.07
温度传感器套管处理方法、温度传感器套管及温度传感器 201910598393.3 发明 2019.07.04
基于共轭梯度法的多层复合材料导热系数测量方法 201910598394.8 发明 2019.07.04
管壳式换热器能效定量的测量方法 201910422002.2 发明 2019.05.20
绝缘介电泳矿石分选系统 201811343838.5 发明 2018.11.12
太阳池 201811338834.8 发明 2018.11.12
侧流试纸检测装置及其制备方法 201810591801.8 发明 2018.06.08

英文期刊论文

2024年论文

  1. X.L. Wang, S.J. Wei, Y.H. Wu, H. Cai, Z.G. Qu*, P. He. Achieving high electrochemical performance of PEMFCs with ultrathin and highly conductive graphite-resin composite bipolar plates. International Journal of Hydrogen Energy, 2024, 55: 654-664.
  2. G.F. Ren, Z.G. Qu*, X.L. Wang, G.B. Zhang, Y. Wang*. Electrospun fabrication and experimental characterization of highly porous microporous layers for PEM fuel cells. International Journal of Hydrogen Energy, 2024, 55: 455-463.
  3. J.F. Zhang, W. Li, G.B. Zhang, H.W. Bai, Z.G. Qu*. Enhancing water hydration in air-cooled proton exchange membrane fuel cell using a staggered tapered slotted flow field. Applications in Energy and Combustion Science, 2024, 17: 100239.
  4. J. Guo, Z.G. Qu*. Transient freeform thermal metamaterials via inverse-design. Applied Thermal Engineering, 2024, 240: 122247.
  5. Z.Y. Jiang, H.B. Li, Z. Sun, Z.G. Qu*. Experimental study on 18650 lithium-ion battery-pack cooling system composed of heat pipe and reciprocating air flow with water mist. International Journal of Heat and Mass Transfer, 2024, 222: 125171.
  6. G.B. Zhang, Z.G. Qu*, W.Q. Tao, Y.T. Mu, K. Jiao, H. Xu, Y. Wang*. Advancing next-generation proton-exchange membrane fuel cell development in multi-physics transfer. Joule, 2024, 8: 1-19.
  7. Y.Q. Zhu, Z.G. Qu*, G.B. Zhang, B. Yu*. A one-dimensional model for Pt degradation and precipitation in proton exchange membrane fuel cell considering Pt nucleation, particle size growth, and band formation. Electrochimica Acta, 2024, 475: 143590.
  8. G.F. Ren, T. Lai, Z.G. Qu*, X.L. Wang, G.B. Zhang. Electrospun gas diffusion layers with reverse gradient pore structures for proton exchange membrane fuel cells under low humidity. Applied Thermal Engineering, 2024, 239: 122109.
  9. X. Zhang, Z.G. Qu*, Z.T. Tang, M. Iqbal. pH-temperature coupled regulation for promoted nanofluidic osmotic energy conversion. Desalination, 2024, 572: 117131.
  10. G.F. Ren, Z.G. Qu*, X.L. Wang, G.B. Zhang. Enhancing the performance of proton exchange membrane fuel cell using nanostructure gas diffusion layers with gradient pore structures. International Journal of Hydrogen Energy, 2024, 52: 1161-1172.
  11. W. Gao, J. Meng, Z.G. Qu, J.F. Zhang*. Experimental and numerical study on thermofluidic characteristics of microchannel heat sinks with various micro pin-fin arrays arrangement patterns. Applied Thermal Engineering, 2024, 240(1): 122236.
  12. T.Y. Shu, X.L. Wang, M. Li, S.Y. Ma, J. Cao, G. Sun, T. Lai, S.B. Liu, A. Li, Z.G. Qu, D.D. Pei*. Nanoscaled titanium oxide layer provokes quick osseointegrationon 3D-Printed dental implants: A domino effect induced by hydrophilic surface. ACS Nano, 2024, 18: 783−797.
  13. H. Rehman1, W. Rehman, Z. Qu, M. Ahmad, S. Yousaf, A. Jamal, M. Iqbal. Electromagnetic biochar: a novel material for cadmium adsorption from industrial wastewater. International Journal of Environmental Science and Technology, 2024, 21: 747-756.

2023年论文

  1. H. Wang, Z.L. Wang, Z.G. Qu*, J.F. Zhang. Deep-learning accelerating topology optimization of three-dimensional coolant channels for flow and heat transfer in a proton exchange membrane fuel cell. Applied Energy, 2023, 352: 121889.
  2. Q. Liu, H.Y. Zhu, Z.G. Qu*. Experiment and simulation analyses of GOM based salinity gradient osmotic energy conversion with nonsymmetric photothermal effect. Energy Conversion and Management, 2023, 198: 117783.
  3. W.K. Wang, Z.G. Qu*. Molecular dynamics simulation of the mechanical properties and thermal conductivity of aromatic electrolytes in proton exchange membrane fuel cells. Journal of Power Sources, 2023, 585(30): 233622.
  4. D. Tian, Z.G. Qu*, J.F. Zhang. Electrochemical condition optimization and techno-economic analysis on the direct CO2 electroreduction of flue gas. Applied Energy, 2023, 351: 121787.
  5. N. Wang, Z.G. Qu*, G.B. Zhang, Z.T. Tang, Y. Wang. Cross flow and distribution characteristics in automobile polymer electrolyte membrane fuel cells: A three-dimensional full-scale modeling study. Journal of Power Sources, 2023, 580: 233348.
  6. Z.Y. Jiang, Z.G. Qu*, Q. Wang. Experimental and numerical investigation of fast preheating of lithium ion pouch cell via low-power inductive heating in cold climate. International Journal of Heat and Mass Transfer, 2023, 214: 124381.
  7. B.B. Hu, Z.G. Qu*, W.Q. Tao. A comprehensive system-level model for performance evaluation of proton exchange membrane fuel cell system with dead-ended anode mode. Applied Energy, 2023.347: 121327.
  8. Q. Liu, Q. Wang, Z.G. Qu*, J.F. Zhang. Interfacial binding rope theory of ion transport in sub-nanochannels and its application for osmotic energy conversion. Nano Energy, 2023, 113: 108545.
  9. X.H. Zhang, Z.G. Qu*, H. Wang. Enhanced sound insulation performance by a staggered phononic crystal with fins. Applied Acoustics, 2023, 208: 109398.
  10. J. Guo, Z.G. Qu*. Adaptive thermal convective cloak via inverse design. International Journal of Heat and Mass transfer, 2023, 212: 124314.
  11. Q. Wang, X. Zhang, H.Y. Zhu, X.F. Zhang, Q. Liu, M.X. Fu, J.J. Zhu, J.Q. Pu, Z.G. Qu*. Nanochannel-Based Ion Transport and its Application in Osmotic Energy Conversion: A Critical Review. Advanced Physics Research, 2023, 2: 2300016.
  12. T. Lai, Z.G. Qu*. Pore-scale parametric sensitivity analysis of liquid water transport in the gas diffusion layer of polymer electrolyte membrane fuel cell. Applied Thermal Engineering, 2023, 229: 120616.
  13. X.L. Wang, Z.G. Qu*, G.F. Ren. Collective enhancement on hydrophobicity and electrical conductivity of gas diffusion layer and the electrochemical performance of PEMFCs. Journal of Power Sources, 2023, 575: 233077.
  14. Q. Liu, Z.G. Qu*, J.F. Zhang. Photothermal enhanced salinity-gradient osmotic energy conversion for sustainable power generation with phase change material. Solar Energy Materials and Solar Cells, 2023, 257: 112369.
  15. G.B. Zhang, Z.G. Qu*, Y. Wang. Proton exchange membrane fuel cell of integrated porous bipolar plate-gas diffusion layer structure: Entire morphology simulation. eTransportation, 2023, 17: 100250.
  16. Z.Y. Jiang, W.K. Wang, H.Y. Zhu, Y. Yin, Z.G. Qu*. Review of shale gas transport prediction: Basic theory, numerical simulation, application of AI methods and perspectives. Energy & Fuels, 2023, 37(4): 2520-2538.
  17. T. Lai, Z.G. Qu*. Two polytetrafluoroethylene distribution effects on liquid water dynamic behavior in gas diffusion layer of polymer electrolyte membrane fuel cell with a pore-scale method. Energy, 2023, 271: 126920.
  18. G.B. Zhang, L.Z. Wu, C. Tongsh, Z.G. Qu*, S.Y. Wu, B. Xie, W.M. Huo, Q. Du, H.Z. Wang, L. An, N. Wang, J. Xuan, W.M. Chen*, F.Q. Xi, Z.X. Wang, K. Jiao*. Structure design for ultrahigh power density proton exchange membrane fuel cell. Small Methods, 2023, 7: 2201537.
  19. G.B. Zhang, Z.G. Qu*, W.Q. Tao, X.L. Wang, L.Z. Wu, S.Y. Wu, X. Xie, C. Tongsh, W.M. Huo, Z.M. Bao, K. Jiao*, Y. Wang*. Porous flow field for next-generation proton exchange membrane fuel cells: Materials, characterization, design, and challenges. Chemical Reviews, 2023, 123(3): 989-1039.
  20. H.Y. Zhu , Z.G. Qu*, Q. Wang , J.F. Zhang. Dimension unification and dominance evaluation of multi-physical parameters for nanochannel-based ionic thermoelectric energy conversion using similarity principle. Energy Conversion & Management, 2023, 276: 116589.
  21. M.J. Zeng, Z.G. Qu*, J.F. Zhang. Experimental study on water collection performance of wire-to-plate electrostatic fog collector at various fog generation rates and fog flow velocities. Separation and Purification Technology, 2023, 305: 122465.
  22. B. Cong, Y.M. Kong*, Y.X. Ye, R.W. Liu, X.B. Du, L.H. Yu, S.Q. Jia, Z.G. Qu*, B.B. Jiao*. A combined solution of thermoelectric coolers and microchannels for multi-chip heat dissipation with precise temperature uniformity control. Applied Thermal Engineering, 2023, 219: 119370.
  23. J.F. Zhang, M. Yang, H.Y. Zhu, Q.L. Ren, Z.G. Qu*. Physical similarity and parametric sensitivity analysis of the capacitive deionization process, International Journal of Green Energy, 2023, 20(12): 1284-1296.
  24. Y. Yin, Z.G. Qu*, M. Prodanović, C.J. Landry. Identifying the dominant transport mechanism in single nanoscale pores and 3D nanoporous media. Fundamental Research, 2023, 3(3): 409-421.
  25. C. Chen, H.T. Yu, T. Lai, J. Guo, M.M. Qin, Z.G. Qu, Y.Y. Feng*, W. Feng*. Flexible and elastic thermal regulator for multimode intelligent temperature control. SusMat, 2023, 3(6): 843-858.
  26. Q. Wang, R.J. Yan, J.C. Chen, Z.Y. Jiang*, Z.G. Qu. Numerical study of vanadium redox flow battery with gradient porosity induced by electrode compression. Journal of Energy Storage, 2023, 72: 108465.
  27. Y.Q. Wei, Z.L. Li, Z.C. Chen, P.Y. Gao, M.X. Gao, C.H. Yan, Z.J. Wu, Q.H. Ma, Y.Z. Jiang, X.B. Yu, X. Zhang, Y.F. Liu, Y.X. Yang*, M.X. Gao, W.P. Sun, Z.G. Qu, J. Chen*, H.G. Pan*. A wide temperature 10 V solid-state electrolyte with a critical current density of over 20 mA cm-2. Energy & Environmental Science, 2023, 16: 4679-4692.
  28. Z.R. Sun, M.J. Li, Z.G. Qu, D. Tian, J.F. Zhang*. A quasi-2D thermodynamic model for performance analysis and optimization of liquid hydrogen storage system with multilayer insulation and vapor-cooled shield. Journal of Energy Storage, 2023, 73; 109128.
  29. X. Chen*, F.S. Chai, S.L. Hu, J.Y. Tan, L. Luo, H.H. Xie, Z.M. Wan*, Z.G. Qu. Design of PEMFC bipolar plate cooling flow field based on fractal theory. Energy Conversion and Management: X, 2023, 20: 100445.
  30. J.L. Fu, Z.G. Qu, J.F. Zhang*, G.B. Zhang. Performance analysis of PEMEC with non-uniform deformation based on a comprehensive numerical framework coupling image recognition and CFD. Applied Energy, 2023, 350: 121772.
  31. C.Y. Zhang, Z.J. Ma, Z.G. Qu, H.T. Xu*, Q.G. Yang. Numerical energy and exergy evaluation for a multiple-layer latent heat storage unit enhanced with nanoparticles under different seasons. Journal of Cleaner Production, 2023, 417: 138098.
  32. S.Y. Zhang, Y.J. Mao, F. Liu, H.T. Xu*, Z.G. Qu, X.W. Liao. Multi-objective optimization and evaluation of PEMFC performance based on orthogonal experiment and entropy weight method. Energy Conversion and Management, 2023, 291: 117310.
  33. W. Rehman, Z.Y. Jiang*, Z.G. Qu, X.L. Wang, X.F. Du, A. Ghani, F. Kabir, Y.L. Xu. Porous carbon derived from cherry blossom leaves treatment with Fe3O4 enhanced the electrochemical performance of a lithium storage anode. Electrochimica Acta, 2023, 455: 142426.
  34. Z.Q. Luo, X.M. Liu, Q.G. Yang, Z.G. Qu, H.T. Xu*, D. Xu. Numerical study on performance of porous brick roof using phase change material with night ventilation. Energy and Buildings, 2023, 286: 112972.
  35. X. Wang*, W.J. Lu, H. Wang*, J.Z. Zhang, Z.G. Qu, F.M. Chen*. Role of solvent in plasma-assisted peroxymonosulfate-hydrothermal process for plastic conversion. Journal of Hazardous Materials, 2023, 448: 130968.
  36. W. Rehman, Z.Y. Jiang*, Z.G. Qu, Y.L. Xu, X.L. Wang, I. Ullah. Preparation of Mn2SnO4 wrapped with N-doped reduced graphene oxide as a stable anode material for lithium-ion storage. Journal of Alloys and Compounds, 2023, 939: 168829.
  37. X. Chen*, S.C. Long, C.X. Wang, F.S. Chai, L.L. Li, P.F. Duan, S.L. Li, Z.M. Wan*, Z.G. Qu. Comprehensive assessment on a hybrid PEMFC multi-generation system integrated with solar-assisted methane cracking. International Journal of Hydrogen Energy, 2023, 48(37): 14025-14037.
  38. X.C. He, Y.Y. Yang, Y.L. Han, C.Y. Cao, Z.B. Zhang, L.X. Li, C.L. Xiao, H. Guo, L. Wang, L.C. Han, Z.G. Qu, N. Liu*, S. Han*, F. Xu*. Extracellular matrix physical properties govern the diffusion of nanoparticles in tumor microenvironment. PANS, 2023, 120(1): e2209260120.
  39. Z.Y. Jiang, M. Yang, Q. Wang, Z.G. Qu, J.F. Zhang*. Magnetic-assisted strategy for performance enhancement of flow-by capacitive deionization. Desalination, 2023, 548: 116274.
  40. Y.T. Mu*, P. He, F. Bai, L. Chen, Z.G. Qu, W.Q. Tao. Numerical analyses on oxygen transport resistances in polymer electrolyte membrane fuel cells using a novel agglomerate model. International Journal of Hydrogen Energy, 2023, 48(4): 3232-3251.

2022年论文

  1. X. Zhang, Z.G. Qu*, Q. Wang, M. Iqbal. Geometry design and mechanism analysis of artificial nanoroughness for enhanced osmotic energy conversion. Energy Conversion & Management, 2022, 273: 116373.
  2. M.J. Zeng, Z.G. Qu*, J.F. Zhang. Negative corona discharge and flow characteristics of a two-stage needle-to-ring configuration ionic wind pump for temperature and relative humidity. International Journal of Heat and Mass Transfer, 2022, 201: 123561.
  3. X.F. Zhang, X. Zhang, Z.G. Qu*, J.Q. Pu, Q. Wang. Thermal-enhanced nanofluidic osmotic energy conversion with the interfacial photothermal method. Applied Energy, 2022, 326: 120005.
  4. H. Wang, R.T. Ji, G.M. Xiao, Z.G. Qu. Pore scale visualization of thermal-fluid-structural evolution in the ablation of carbon/carbon composites. Aerospace Science and Technology, 2022, 130: 107924.
  5. G.B. Zhang, Z.G. Qu*, Y. Wang. Full-scale three-dimensional simulation of air-cooled proton exchange membrane fuel cell stack: temperature spatial variation and comprehensive validation. Energy Conversion & Management, 2022, 270: 116211.
  6. D. Tian, Z.G. Qu*, T. Lai, G.D. Zhu. A prediction model for nanoparticle diffusion behavior in fibrous materials considering steric and hydrodynamic resistances. Physical Chemistry Chemical Physics, 2022, 24: 24394-24403.
  7. Z.Y. Jiang, J.Y. Li, Z.G. Qu*, L. Wang, J.Y. Miao. Theoretical analysis on thermal grease dry-out degradation in space environment. International Journal of Thermal Sciences, 2022, 179: 107694.
  8. N. Wang, Z.G. Qu*, Z.Y. Jiang, G.B. Zhang. A unified catalyst layer design classification criterion on proton exchange membrane fuel cell performance based on a modified agglomerate model.   Chemical Engineering Journal, 2022, 447: 137489.
  9. Q. Wang, Z.G. Qu*, X. Zhang, L. Chen. Electronic-level insight into interfacial effects and their induced anisotropic ion diffusion and ion selectivity in nanochannels. ACS Applied Materials & Interfaces, 2022, 14: 37608-37619.
  10. W. Rehman, Z.Y. Jiang, Z.G. Qu*, S. Ahmed, A. Ghani, Y.L. Xu. Highly crystalline Prussian blue cubes filled with tin oxide as anode materials for lithium-ion batteries. Applied Surface Science, 2022, 604: 154533.
  11. J.J. Zhang, Z.G. Qu*, J.F. Zhang. Diode model of nonuniform irradiation treatment to predict multiscale solar-electrical conversion for the concentrating plasmonic photovoltaic system.  Applied Energy, 2022, 324: 119698.
  12. N. Wang, Z.G. Qu*, G.B. Zhang. Modeling analysis of polymer electrolyte membrane fuel cell with regard to oxygen and charge transport under operating conditions and hydrophobic porous electrode designs. eTransportation, 2022, 14: 100191.
  13. J.H. Yu, Z.G. Qu*, J.F. Zhang, S.J. Hu, J.L. Song, Y.D. Chen. A comprehensive energy efficiency assessment indicator and grading criteria for natural draft wet cooling towers. Energy, 2022, 254: 124375.
  14. J.J. Zhang, Z.G. Qu*, J.F. Zhang. MCRT-FDTD investigation of the solar-plasmonic-electrical conversion for uniform irradiation in a spectral splitting CPVT system. Applied Energy, 2022, 315: 119054.
  15. J. Guo, G.Q. Xu, D. Tian, Z.G. Qu*, C.W. Qiu*. A real-time self-adaptive thermal metasurface.Advanced Materials, 2022, 34: 2201093.
  16. J. Guo, G.Q. Xu, D. Tian, Z.G. Qu*, C.W. Qiu*. Passive ultra-conductive thermal metamaterials. Advanced Materials, 2022, 34: 2200329. 
  17. J.F. Zhang, X.W. Wu, J.G. Qu, D.W. Zhang, Z.G. Qu*. Electrohydrodynamic and heat transfer characteristics of a planar ionic wind generator with flat electrodes. Applied Thermal Engineering, 2022, 211: 118508.
  18. X.L. Wang, Z.G. Qu*, T. Lai, G.F. Ren, W.K. Wang. Enhancing water transport performance of gas diffusion layers through coupling manipulation of pore structure and hydrophobicity. Journal of Power Sources, 2022, 525: 231121.
  19. X.L. Wang, Z.G. Qu*, H.T. Yang, G.B. Zhang, Y.C. Zhang*, C.F. Liu. Collective enhancements on thermal-electrical and mechanical properties of graphite-based composite bipolar plates through the coupled manipulations of molding and impregnation pressures. Membranes, 2022, 12: 222.  
  20. Wang M#, Wang H#, Y. Yin, S. Rahardja, Z.G. Qu*. Temperature field prediction for various porous media considering variable boundary conditions using deep learning method. International Communications in Heat and Mass Transfer, 2022, 132: 105916.
  21. H. Wang, B.Z. Lai, Z.G. Qu*, P.W. Ming. Moving impingement heat transfer in a three-dimensional rarefied hydrogen gas jet based on the direct simulation Monte Carlo method coupled with the finite difference method. International Journal of Heat and Mass Transfer, 2022, 188: 122586.
  22. Z.Y. Jiang, H.B. Li, Z.G. Qu*, J.F. Zhang. Recent progress in lithium-ion battery thermal management for a wide range of temperature and abuse conditions. International Journal of Hydrogen Energy, 2022, 47(15): 9428-9459.
  23. X.H. Zhang, Z.G. Qu*. Viscous and thermal dissipation during the sound propagation in the continuously graded phononic crystals. Applied Acoustics, 2022, 189: 108606.
  24. Q.L. Ren, K.L. Chen, H.Y. Zhu, J.F. Zhang, Z.G. Qu*. Nanoparticle enhanced salinity-gradient osmotic energy conversion under photothermal effect. Energy Conversion and Management, 2022, 251: 115032.
  25. Q.L. Ren, H.Y. Zhu, K.L. Chen, J.F. Zhang, Z.G. Qu*. Similarity principle based multi-physical parameter unification and comparison in salinity-gradient osmotic energy conversion. Applied Energy, 2022, 307: 118312.
  26. J.H. Yu, Z.G. Qu*, J.F. Zhang, S.J. Hu, J. Guan. Comprehensive coupling model of counter-flow wet cooling tower and its thermal performance analysis. Energy, 2022, 238: 121726.
  27. G.F. Ren, Z.G. Qu*, X.L. Wang, J.F. Zhang. Liquid water transport and mechanical performance of electrospun gas diffusion layers. International Journal of Green Energy, 2022, 19(2): 210-218.
  28. W.J. Lu, X. Wang*, J.Z. Zhang, H. Wang*, Z.G. Qu, F.M. Chen*, Z.C. Wang. Plasma boosted the conversion of waste plastics into liquid fuel by a peroxymonosulfate-hydrothermal process. Chemical Engineering Journal, 2022, 446: 137236.
  29. D. Xu, Z.G. Qu, H.T. Xu*, Q.G. Yang, Z.Q. Luo, H.T. Pan. Pore-scale study on the effects of randomly distributed void cavities on the thermal performance of composite phase change materials. Journal of Energy Storage, 2022, 55: 105715.
  30. C.Y. Zhang, N. Wang, Q.G. Yang, H.T. Xu*, Z.G. Qu, Y. Fang. Energy and exergy analysis of a switchable solar photovoltaic/thermal-phase change material system with thermal regulation strategies. Renewable Energy, 2022, 196: 1392-1405.
  31. F. Wang, R.J. Zhao*, C.M. Ma, D. Huang,, Z.G. Qu. Reversely-variable circuitry for finned-tube heat exchanger in air source heat pump to enhance its overall energy performance. International Journal of Refrigeration, 2022, 142: 48-57.
  32. F. Wang, W.W. Li, C. Ding*, Z.G. Qu, R.B. Luo, X. Chen. Optimization on annual energy efficiency of heat pumps based on maximum solving of definition functions with multi constraints. Applied Energy, 2022, 321: 119423.
  33. S.Y. Zhang, H.T. Xu*, Z.G. Qu, S. Liu, F.K. Talkhoncheh. Bio-inspired flow channel designs for proton exchange membrane fuel cells: A review. Journal of Power Sources, 2022, 522: 231003.
  34. Y.T. Mu*, P. He, Z.L. Gu, Z.G. Qu, W.Q. Tao. Modelling the reactive transport processes in different reconstructed agglomerates of a PEFC catalyst layer. Electrochimica Acta, 2022, 404: 139721.

2021年论文

  1. X.C. He, L.X. Li, Y.Y. Yang, Z.T. Dong, L. Wang, Z.G. Qu*, F. Xu. Tailoring patchy nanoparticle design to modulate serum albumin adsorption and membrane interaction. Soft Matter, 2021,17: 2071.
  2. H. Wang, Z.G. Qu*, Y. Yin, J.F. Zhang, P.W. Ming. Thermal management for hydrogen charging and discharging in a screened metal-organic framework particle tank. ACS Applied Materials & Interfaces, 2021, 13(51): 61838-61848.
  3. Q. Liu, Z.T. Tang, Z.G. Qu*, Q.L. Ren, J.F. Zhang, R.X. Tang. A capacitor-based power equivalent model for salinity-gradient osmotic energy conversion. Energy Conversion and Management, 2021, 250: 114862.
  4. J.J. Zhang, Z.G. Qu*, Q. Wang, J.F. Zhang, Y.L. He. Multiscale investigation of the plasmonic solar cell in the spectral splitting concentrating photovoltaic-thermal system. Energy Conversion and Management, 2021, 250: 114846.
  5. Z.N. Duan, Z.G. Qu*, Q.L. Ren, J.F. Zhang. Review of bipolar plate in redox flow batteries: materials, structures, and manufacturing. Electrochemical Energy Reviews, 2021, 4(4): 718-756.
  6. X.L. Wang, W.K. Wang, Z.G. Qu*, G.F. Ren, H.C. Wang. Surface roughness dominated wettability of carbon fiber in gas diffusion layer materials revealed by molecular dynamics simulations. International Journal of Hydrogen Energy, 2021, 46: 26489-26498.
  7. J.F. Zhang, D.W. Zhang, X.W. Wu, Q.L. Ren, Z.G. Qu*. Current-voltage characteristics and breakdown of different structural planar microelectrodes in atmospheric air. AIP Advances, 2021, 11(6): 065301.
  8. Q. Wang, Z.G. Qu*, Z.Y. Jiang, J. Xuan, H.Z. Wang. A pluggable current collector for in-operando current measurements in all-vanadium redox flow batteries with flow field. Electrochimica Acta, 2021, 389: 138725.
  9. Z.N. Duan, Z.G. Qu*, J.F. Zhang. Thermodynamic and electrochemical performance analysis for an electrochemical refrigeration system based on iron/vanadium redox couples. Electrochimica Acta, 2021, 389: 138675.
  10. R.P. Fu, Z.G. Qu*, W.Q. Tao, X.B. Zhu, J.R. Liu. Experimental and numerical study on performance of hybrid refrigeration system that combines vapor compression and thermoelectric systems. Applied Thermal Engineering, 2021, 194: 117107.
  11. D. Tian, Z.G. Qu*, J.F. Zhang, Q.L. Ren. Enhancement of solar pond stability performance using an external magnetic field. Energy Conversion and Management, 2021, 243: 114427.
  12. Y. Yin, Z.G. Qu*, C.Y. Zhu, J.F. Zhang. Visualizing gas diffusion behaviors in three-dimensional nanoporous media. Energy & Fuels, 2021, 35(3): 2075-2086.
  13. J. Guo, X.N. Chen, Z.G. Qu*, Q.L. Ren. Reverse identification method for simultaneous estimation of thermal conductivity and thermal contact conductance of multilayered composites. International Journal of Heat and Mass Transfer, 2021, 173: 121244.
  14. W.K. Wang, Z.G. Qu*, X.L. Wang, J.F. Zhang. A molecular model of PEMFC catalyst layer: Simulation on reactant transport and thermal conduction. Membranes, 2021, 11(2): 148-162.
  15. Q.L. Ren, Z.X. Wang, T. Lai, J.F. Zhang, Z.G. Qu*. Conjugate heat transfer in anisotropic woven metal fiber-phase change material composite. Applied Thermal Engineering, 2021, 189: 116618.
  16. M.J. Zeng, J.F. Zhang*, S. Wang, Z.G. Qu*.  Analysis of a two-stage ionic wind pump with multiple needle-to-mesh electrodes for cooling electronics. Applied Thermal Engineering, 2021, 185: 116340.
  17. H.T. Xu, N. Wang, C.Y. Zhang, Z.G. Qu*, F. Karimi. Energy conversion performance of a PV/T-PCM system under different thermal regulation strategies. Energy Conversion and Management, 2021, 229: 113660.
  18. Q.L. Ren*, Z.X. Wang, J.J. Zhu, Z.G. Qu*. Pore-scale heat transfer of heat sink filled with stacked 2D metal fiber-PCM composite. International Journal of Thermal Sciences, 2021, 161: 106739.
  19. J.J. Zhang, Z.G. Qu*, J.F. Zhang, A. Maharjan. A three-dimensional numerical study of coupled photothermal and photoelectrical processes for plasmonic solar cells with nanoparticles. Renewable Energy, 2021, 165: 278-287.
  20. Q. Wang, Z.G. Qu*, Z.Y. Jiang, Y. Yin, L. Chen. The numerical study of vanadium redox flow battery performance with different electrode morphologies and electrolyte inflow patterns. Journal of Energy Storage, 2021, 33: 101941.
  21. H. Wang, Z.G. Qu*, Y. Yin, J.Q. Bai, C. He. Prediction of the effective thermal conductivity of an adsorption bed packed with 5A zeolite particles under working conditions. International Journal of Thermal Sciences, 2021, 159: 106630.
  22. W.H. Song*, Y. Yin, C.J. Landry, M. Prodanović, Z.G. Qu, J. Yao. A local-effective-viscosity multirelaxation-time lattice Boltzmann pore-network coupling model for gas transport in complex nanoporous media. SPE Journal, 2021, 26 (1): 461-481.
  23. W. Gao, J.F. Zhang*, Z.G. Qu, W.Q. Tao. Numerical investigations of heat transfer in hybrid microchannel heat sink with multi-jet impinging and trapezoidal fins. International Journal of Thermal Sciences, 2021, 164: 106902.
  24. F. Wang, R.J. Zhao*, W.M. Xu, D. Huang, Z.G. Qu. A heaterassisted air source heat pump air conditioner to improve thermal comfort with frost-retarded heating and heat-uninterrupted defrosting. Energies, 2021, 14(9): 2646.
  25. S.Y. Zhang, Z.G. Qu, H.T. Xu*, F.K. Talkhoncheh, S.L. Liu, Q. Gao. A numerical study on the performance of PEMFC with wedge-shaped fins in the cathode channel. International Journal of Hydrogen Energy, 2021, 46(54): 27700-27708.
  26. Y.Q. Zhu, P. Wang, D.L. Sun, Z.G. Qu, B. Yu. Multiphase porous media model with thermo-hydro and mechanical bidirectional coupling for food convective drying. International Journal of Heat and Mass Transfer, 2021, 175: 121356.
  27. Y.Q. Zhu, P. Wang*, Y. Wang, R.K. Tong, B. Yu, Z.G. Qu. Assessment method for gas supply reliability of natural gas pipeline networks considering failure and repair. Journal of Natural Gas Science and Engineering, 2021, 88: 103817.
  28. Q.L. Ren*, C.X. Liang, Z.X. Wang, Z.G. Qu. Continuous trapping of bacteria in non-Newtonian blood flow using negative dielectrophoresis with quadrupole electrodes. Journal of Physics D: Applied Physics, 2021, 54: 015401.

2020年论文

  1. J.P. Wang, J.F. Zhang*, Z.G. Qu*, W.Q. Tao. An adaptive inner iterative pressure-based algorithm for steady and unsteady incompressible flows. International Journal of Numerical Methods for Heat & Fluid Flow, 2020, 30(4): 2003-2024.
  2. H. Wang, X.Y. Hui, Y. Yin, Z.G. Qu*, J. Q. Bai. Screening Study of the Effects of Impurity Gases on Hydrogen Storage in Metal-Organic Frameworks. Journal of Energy Engineering, 2020, 146(6): 04020065.
  3. H. Wang, Y. Yin, X.Y. Hui, J.Q. Bai, Z.G. Qu*. Prediction of effective diffusivity of porous media using deep learning method based on sample structure information self-amplification. Energy and AI, 2020, 2:100035.
  4. J. Guo, Z.G. Qu*, X.L. Wang. A reverse thermal cloak design method based on inverse problem theory. ES Energy & Environment, 2020, 7: 71-83.
  5. Z.Y. Jiang, M.Z. Jing, X.B. Feng, J.C. Xiong, C. He*, M. Douthwaite, L.R. Zheng, W.Y. Song, J. Liu*, Z.G. Qu*. Stabilizing platinum atoms on CeO2 oxygen vacancies by metal-support interaction induced interface distortion: mechanism and application. Applied Catalysis B: Environmental, 2020, 278: 119304.
  6. P.Z. Lyu, X.J. Liu, J. Qu, J.T. Zhao, Y.T. Huo, Z.G. Qu*, Z.H. Rao*. Recent advances of thermal safety of lithium ion battery for energy storage. Energy Storage Materials, 2020, 31: 195-220.
  7. Y. Fang, Z.G. Qu*, J.F. Zhang, H.T. Xu, G.L. Qi. Charging performance of latent thermal energy storage system with microencapsulated phase-change material for domestic hot water. Energy & Buildings, 2020, 224: 110237.
  8. Y. Fang, Z.G. Qu*, J.F. Zhang, H.T. Xu, G.L. Qi. Simultaneous charging and discharging performance for a latent thermal energy storage system with a microencapsulated phase change material. Applied Energy, 2020, 275: 115353.
  9. H.T. Xu, N. Wang, C.Y. Zhang, Z.G. Qu*, M. Cao. Optimization on the melting performance of triplex-layer PCMs in a horizontal finned shell and tube thermal energy storage unit.  Applied Thermal Engineering, 2020, 176: 115409.
  10. W.Z. Li, W.W. Yang*, N. Wang, Y.H. Jiao, Y. Yang, Z.G. Qu*. Optimization of blocked channel design for a proton exchange membrane fuel cell by coupled genetic algorithm and three-dimensional CFD modeling. International Journal of Hydrogen Energy, 2020, 45:  17759-17770.
  11. X.H. Zhang, Z.G. Qu*, H. Wang. Engineering acoustic metamaterials for sound absorption: From uniform to gradient structures. iScience, 2020, 23(5): 101110.
  12. X.L. Wang, B. Li, Z.G. Qu*, J.F. Zhang, Z.G. Jin. Effects of graphite microstructure evolution on the anisotropic thermal conductivity of expanded graphite/paraffin phase change materials and their thermal energy storage performance. International Journal of Heat and Mass Transfer, 2020, 155: 119853.
  13. X.C. He, Z.L. Gu, L. Wang, Z.G. Qu*, F. Xu*. Coarse-grained molecular dynamics simulation of dendrimer transmembrane transport with temperature-dependent membrane phase states. International Journal of Heat and Mass Transfer, 2020, 155: 119797.
  14. Z.Y. Jiang, Z.G. Qu*, J.F. Zhang, Z.H. Rao. Rapid prediction method for thermal runaway propagation in battery pack based on lumped thermal resistance network and electric circuit analogy. Applied Energy, 2020, 268: 115007.
  15. X.L. Wang, Z.G. Qu*, G.F. Ren, C. Feng, F. Cheng. Prolonged yield platform in bioinspired three dimensional carbon materials derived from crack deflection. Materials Letters, 2020, 270: 127759.
  16. Y. Yin, Z.G. Qu*, T. Zhang, J.F. Zhang, Q.Q. Wang. Three-dimensional pore-scale study of methane gas mass diffusion in shale with spatially heterogeneous and anisotropic features. Fuel, 2020, 273: 117750.
  17. J.F. Zhang, G.M. Wei, Z.G. Qu*. A time-saving method to evaluate the thermal insulation performance of cryogenic vessels. Journal of Cleaner Production, 2020, 258: 120632.
  18. H. Wang, L. Chen, Z.G. Qu*, Y. Yin, Q.J. Kang, B. Yu, W.Q. Tao. Modeling of multi-scale transport phenomena in shale gas production — A critical review. Applied Energy, 2020, 262: 114575. 
  19. H.T. Xu, C.Y. Zhang, N. Wang, Z.G. Qu*, S.Y. Zhang. Experimental study on the performance of a solar photovoltaic/thermal system combined with phase change material. Solar Energy, 2020, 198: 202-211.
  20. Y.S. Pang, J.J. Zhang, R.M. Ma, Z.G. Qu*, E. Lee*, T.F. Luo*. Solar-thermal water evaporation: a review. ACS Energy Letter, 2020, 5: 437-456.
  21. P.Z. Lyu, Y.T. Huo, Z.G. Qu*, Z.H. Rao*. Investigation on the thermal behavior of Ni-rich NMC lithium ion battery for energy storage. Applied Thermal Engineering, 2020, 166: 114749.
  22. Z.G. Qu*, Y. Yin, H. Wang, J.F. Zhang. Pore-scale investigation on coupled diffusion mechanisms of free and adsorbed gases in nanoporous organic matter. Fuel, 2020, 260: 116423.
  23. A.H.A. Khan, I. Nawaz, Z.G. Qu, T.A. Butt, S. Yousaf*, M. Iqbal*. Reduced growth response of ornamental plant Nicotiana alata L. upon selected heavy metals uptake, with co-application of ethylenediaminetetraacetic acid. Chemosphere, 2020, 241: 125006.
  24. G.L. Qi*, X.M. Liu*, Z.W. Wang, S.S. Zhang, J. Guan, H. Liu, Z.G. Qu. Numerical simulation and optimization of heat-insulation material and structure for CFB boiler. Thermal Science and Engineering Progress, 2020, 20: 100692.

2019年论文

  1. D.Z. Huang, T. Zhang, G.P. Xiong, L.J. Xu, Z.G. Qu*, E. Lee*, T.F. Luo*. Tuning water slip behavior in nanochannels using self-assembled monolayers. ACS Applied Materials & Interfaces, 2019, 11: 32481-32488.
  2. Y. Yin, Z.G. Qu*, J.F. Zhang. Multiple diffusion mechanisms of shale gas in nanoporous organic matter predicted by the local diffusivity lattice Boltzmann model. International Journal of Heat and Mass Transfer, 2019, 143: 118571.
  3. X.H. Zhang, Z.G. Qu*, Y. C. Xu. Enhanced sound absorption in two-dimensional continuously graded phononic crystals. Japanese Journal of Applied Physics, 2019, 589: 090904.
  4. Z. Liu#, X.C. He#, A. Li, Z.G. Qu*, F. Xu*. A two-dimensional mathematical model for analyzing the effects of capture probe properties on the performance of lateral flow assays. Analyst, 2019, 144(18): 5394-5403.
  5. Y. Liu, Z.G. Qu*, J. Guo, X.M. Zhao. Numerical study on effective thermal conductivities of plain woven C/SiC composites with considering pores in interlaced woven yarns. International Journal of Heat and Mass Transfer, 2019, 140: 410-419.
  6. Z.N. Duan, Z.G. Qu*, Q. Wang, J.J. Wang. Structural modification of vanadium redox flow battery with high electrochemical corrosion resistance. Applied Energy, 2019, 250: 1632-1640.
  7. X.L. Wang, Y.P. Wang, Y. Su, Z.G. Qu*. Synergetic strengthening effects on copper matrix induced by Al2O3 particle revealed from micro-scale mechanical deformation and microstructure evolutions. Ceramics International, 2019, 45: 14889-14895.
  8. X.C. He#, Z. Liu#, Y.Y. Yang, L.X. Li, L. Wang, A. Li, Z.G. Qu*, F. Xu*. Sensitivity enhancement of nucleic acid lateral flow assays through a physical-chemical coupling method: dissoluble saline barriers. ACS Sensors, 2019, 4(6): 1691-1700.
  9. Z.Y. Jiang, Z.G. Qu*. Lithium-ion battery thermal management using heat pipe and phase change material during discharge-charge cycle: A comprehensive numerical study. Applied Energy, 2019, 242: 378-392. 
  10. H. Wang, J.Q. Bai*, Z.G. Qu*, M. Chang. Numerical study of heat transfer in process of gas adsorption in a Cu-benzene- 1, 3, 5-tricarboxylic acid particle adsorption bed. International Journal of Hydrogen Energy, 2019, 44: 11989-12002.
  11. X.H. Zhang, Z.G. Qu*, D. Tian, Y. Fang. Acoustic characteristics of continuously graded phononic crystals. Applied Acoustics, 2019, 151: 22-29.
  12. J.J. Zhang, Z.G. Qu*, A. Maharjan. Numerical investigation of coupled optical-electrical-thermal processes for plasmonic solar cells at various angles of incident irradiance. Energy, 2019, 174: 110-121.
  13. Z.G. Qu*, Z.Y. Jiang, Q. Wang. Experimental study on pulse self-heating of lithium-ion battery at low temperature. International Journal of Heat and Mass Transfer, 2019, 135: 696-705.
  14. Y. Yin, Z.G. Qu*, J.F. Zhang. Pore-scale prediction of the effective mass diffusivity of heterogeneous shale structure using the lattice Boltzmann method. International Journal of Heat and Mass Transfer, 2019, 133: 976-985. 
  15. L. Zhou, Z.G. Qu*, G. Chen, J.Y. Huang, J.Y. Miao. One-dimensional numerical study for loop heat pipe with two-phase heat leak model. International Journal of Thermal Sciences, 2019, 137:461-481. 
  16. J.F. Zhang, S. Wang; M.J. Zeng, Z.G. Qu*. Experimental and numerical investigation on flow characteristics of large cross-sectional ionic wind pump with multiple needles-to-mesh electrode. ASME Journal of Fluid Engineering, 2019, 141(3): 031105-1.
  17. H.T. Xu, Z.Q. Luo, N. Wang, Z.G. Qu*, J. Chen, L. An. Experimental study of the selective catalytic reduction after-treatment for the exhaust emission of a diesel engine. Applied Thermal Engineering, 2019, 147: 198-204.
  18. H. Wang, Z.G. Qu*, Y. Yin, J.Q. Bai, B. Yu. Review of molecular simulation method for gas adsorption/desorption and diffusion in shale matrix. Journal of Thermal Sciences, 2019, 28 (1): 1-16.
  19. J.F. Zhang*, L.J. Kong, J.G. Qu, S. Wang, Z.G. Qu. Numerical and experimental investigation on configuration optimization of the large-size ionic wind pump. Energy, 2019, 171: 624-630.
  20. A. Raza, A.H.A. Khan, I. Nawaz, Z.G. Qu, S. Yousaf, M.A. Ali, A.U. Sayal, M. Iqbal*. Evaluation of Arsenic-induced stress in Dahlia pinnata Cav.: Morphological and physiological response. Soil and Sediment Contamination: An International Journal, 2019, 28(7): 716-728.
  21. W.Z. Li, W.W. Yang*, W.Y. Zhang, Z.G. Qu, Y.L. He. Three-dimensional modeling of a PEMFC with serpentine flow field incorporating the impacts of electrode inhomogeneous compression deformation. International Journal of Hydrogen Energy, 2019, 44: 22194-22209.
  22. S. Wang, J.G. Qu, L.J. Kong, J.F. Zhang*, Z.G. Qu. Numerical and experimental study of heat-transfer characteristics of needleto-ring-type ionic wind generator for heated-plate cooling. International Journal of Thermal Sciences, 2019, 139: 176-185.
  23. S.F. Zhang, L.N. Liu, R.H. Tang*, Z. Liu, X.C. He, Z.G. Qu, F. Li*. Sensitivity enhancement of lateral flow assay by embedding cotton threads in paper. Cellulose, 2019, 26: 8087-8099.

2018年论文

  1. Z. Liu#, X.C. He#, J.X. Han, X.H. Zhang, F. Li, A. Li, Z.G. Qu*, F. Xu*. Liquid wicking behavior in paper-like materials: Mathematical models and their emerging biomedical applications. Microfluidics and Nanofluidics, 2018, 22(110): 132.
  2. Z.G. Qu*, G. Chen, L. Zhou, J.Y. Miao. Numerical study on the operating characteristics of cryogenic loop heat pipes based on a one-dimensional heat leak model. Energy Conversion and Management, 2018, 172: 485-496.
  3. X.L. Wang, X. Wang, M. Liu, M. A. Crimp, Y.P. Wang, Z.G. Qu*. Anisotropic thermal expansion coefficient of multilayer graphene reinforced copper matrix composites. Journal of Alloys and Compounds, 2018, 755: 114-122.
  4. L.Q. Ren, S.J. Yang, P.R. Zhang, Z.G. Qu*, Z.M. Mao, P.H. Huang, Y.C Chen, M.X. Wu, L. Wang, P. Li, T. J. Huang*. Standing surface acoustic wave (SSAW)-based fluorescence-activated cell sorter. Small, 2018, 14(40): 1801996.
  5. H.T. Xu, Y.B. Miao, N. Wang, Z.G. Qu*, X.C. Wang. Experimental investigations of heat transfer characteristics of MPCM during charging. Applied Thermal Engineering, 2018, 144: 721-725.
  6. J. Guo, Z.G. Qu*. Thermal cloak with adaptive heat source to proactively manipulate temperature field in heat conduction process. International Journal of Heat and Mass Transfer, 2018, 127: 1212-1222.
  7. Z. Liu, Z.G. Qu*, R.H. Tang, X.C. He, H. Yang, D. Bai, F. Xu*. An improved detection limit and working range of lateral flow assays based on a mathematical model. Analyst, 2018, 143(12): 2775-2783
  8. J.P. Wang, J.F. Zhang*, Z.G. Qu*, W.Q. Tao. Adaptive inner iteration processes in pressure-based method for viscous compressible flows. Numerical Heat Transfer, Part B: Fundamentals, 2018, 74(3): 603-622
  9. J.F. Zhang, S. Wang, H.Y. Li, Z.G. Qu*. Parametric study and optimization of flow characteristics of wire-nonparallel plate-type electrostatic air accelerators. Journal of Fluids Engineering, 2018, 140(10): 101105.
  10. H. Wang, Z.G. Qu*, J.Q. Bai, Y.S. Qiu. Combined grand canonical Monte Carlo and finite volume method simulation method for investigation of direct air capture of low concentration CO2 by 5A zeolite adsorbent bed. International Journal of Heat and Mass Transfer, 2018, 126: 1219-1235.
  11. Z.Y. Jiang, Z.G. Qu*, L. Zhou. Lattice Boltzmann simulation of ion and electron transport during the discharge process in a randomly reconstructed porous electrode of a lithium-ion battery. International Journal of Heat and Mass Transfer, 2018, 123: 500-513.
  12. Q. Wang, Z.G. Qu*, Z.Y. Jiang, W.W. Yang*. Numerical study on vanadium redox flow battery performance with non-uniformly compressed electrode and serpentine flow field. Applied Energy, 2018, 220: 106-116.
  13. H. Wang, Z.G. Qu*, L. Zhou. Coupled GCMC and LBM simulation method for visualizations of CO2/CH4 gas separation through Cu-BTC membranes. Journal of Membrane Science, 2018, 550: 448-461
  14. Z.G. Qu*, Y.D. Fu, Y. Liu, L. Zhou. Approach for predicting effective thermal conductivity of aerogel materials through a modified lattice Boltzmann method. Applied Thermal Engineering, 2018, 132: 730-739.
  15. X.B. Feng, Z.G. Qu*. Methane combustion with cobalt-substituted barium-lanthanum hexaaluminate catalysts supported on porous monolithic honeycombs. Journal of Energy Engineering, 2018, 144(3): 04018015.
  16. Q. Wang, Z.G. Qu*, Z.Y. Jiang, W.W. Yang*. Experimental study on the performance of a vanadium redox flow battery with non-uniformly compressed carbon felt electrode. Applied Energy, 2018, 213: 293-305.
  17. W.W. Yang*, F.Y. Yan, Z.G. Qu, Y.L. He. Effect of various strategies of soc-dependent operating current on performance of a vanadium redox flow battery. Electrochimica Acta, 2018, 259: 772-782.

2017年论文

  1. H. Wang, Z.G. Qu*, L. Zhou. A combined GCMC and LBM simulation method for CH4 capture in Cu-BTC particle adsorption bed. International Communications in Heat and Mass Transfer, 2017, 88: 48-53.
  2. Z.Y. Jiang, Z.G. Qu*, L. Zhou, W.Q. Tao. A microscopic investigation of ion and electron transport in lithium-ion battery porous electrodes using the lattice Boltzmann method. Applied Energy, 2017, 194: 530-539.
  3. Y. Yin, Z.G. Qu*, J.F. Zhang. An analytical model for shale gas transport in kerogen nanopores coupled with real gas effect and surface diffusion. Fuel, 2017, 210: 569-577.
  4. M.M.U. Rehman, Z.G. Qu*, R.P. Fu. Numerical study on free-surface jet impingement cooling with nanoencapsulated phase-change material slurry and nanofluid. International Journal of Heat and Mass Transfer, 2017, 109: 312-325.
  5. H.T. Xu, T.T. Wang, Z.G. Qu*, J. Chen, B.B. Li. Lattice Boltzmann simulation of the double diffusive natural convection and oscillation characteristics in an enclosure filled with porous medium. International Communications in Heat and Mass Transfer, 2017, 81: 104-115.
  6. H.T. Xu, X.W. Liao, Z.G. Qu*, Y.Z. Li, J. Chen. Experimental study of the effect of a radiant tube on the temperature distribution in a horizontal heating furnace. Applied Thermal Engineering, 2017, 113: 1-7.
  7. Y. Fang, Z.G. Qu*, Y.D. Fu. Experimental study of the thermal characteristics of microencapsulated phase change composite cylinders. Applied Thermal Engineering, 2017, 114, 1256-1264.
  8. X.C. He, Z.G. Qu*, F. Xu. Simulation study of interaction mechanism between peptide and asymmetric membrane. Molecular Simulation, 2017, 43(1): 34-41.
  9. Z. Liu#, J. Hu#, A. Li, S.S. Feng, Z.G. Qu*, F. Xu*. The effect of report particle properties on lateral flow assays: A mathematical model. Sensors and Actuators B: Chemical, 2017,248: 699-707.
  10. H.B. Gao, X.B. Feng, Z.G. Qu*. Combustion in a hybrid porous burner packed with alumina pellets and silicon carbide foams with a gap. Journal of Energy Engineering,  2017, 143(5): 04017032.
  11. Z.G. Qu*, H. Wang, W. Zhang*. Highly efficient adsorbent design using a Cu-BTC/CuO/ carbon fiber paper composite for high CH4/N2 selectivity. RSC Advances, 2017, 7: 14206-14218.
  12. S. Wang, J.F. Zhang*, L.J. Kong, Z.G. Qu, W.Q. Tao. An numerical investigation on the cooling capacity of needle-ring type electrostatic fluid accelerators for round plate with uniform and non-uniform heat flux. International Journal of Heat and Mass Transfer, 2017, 113: 1-5.
  13. Z.D. Li, F. Li*, Y. Xing, Z. Liu, M.L. You, Y.C. Li, T. Wen, Z.G. Qu, X.L. Li, F. Xu. Pen-on-paper strategy for point-of-care testing: Rapid prototyping of fully written microfluidic biosensor. Biosensors and Bioelectronics, 2017, 98: 478-485.
  14. R.H. Tang, H. Yang*, Y. Gong, Z. Liu, X.J. Li, T. Wen, Z.G. Qu, S.F. Zhang, Q.B. Mei, F. Xu*. Improved analytical sensitivity of lateral flow assay using sponge for HBV nucleic acid detection. Scientific Reports, 2017, 7(1): 1360.
  15. R.H. Tang, H. Yang*, Y. Gong, M.L. You, Z. Liu, J. R. Choi, T. Wen, Z.G. Qu, Q.B. Mei, F. Xu*. A fully disposable and integrated paper-based device for nucleic acid extraction, amplification and detection. Lab on a Chip, 2017, 17(7): 1270-1279.
  16. H. Liu, Q.N. Yu*, Z.G. Qu, R.Z. Yang. Simulation and analytical validation of forced convection inside open cell metal foams. International Journal of Thermal Sciences, 2017, 111: 234-245.

2016年之前论文

  1. Z.G. Qu*, A. Li, W.Q. Tao. A numerical study of film condensation on a metallic foam-sintered plate with considering convection and super-cooling effects. International Communications in Heat and Mass Transfer, 2016, 79: 105-113.
  2. X.H. Zhang, Z.G. Qu*, X.C. He, D.L. Lu. Experimental study on the sound absorption characteristics of continuously graded phononic crystals. AIP Advances, 2016, 6(10): 105205.
  3. X.B. Feng, Z.G. Qu*. Lean methane premixed combustion over a catalytically stabilized zirconia foam burner. International Journal of Green Energy, 2016 13(14): 1451-1459.
  4. M.M.U. Rehman, Z.G. Qu*, R.P. Fu. Three-dimensional numerical study of laminar confined slot jet impingement cooling using slurry of nano-encapsulated phase change material. Journal of Thermal Science. 2016, 25(5): 431-439.
  5. X.B. Feng, Z.G. Qu*, H.B. Gao. Premixed lean methane/air combustion in a catalytic porous foam burner supported with perovskite LaMn0.4Co0.6O3catalyst with different support materials and pore densities. Fuel Processing Technology, 2016, 150: 117-125.
  6. J.J. Zhang, Z.G. Qu*, Y. Liu. Numerical study on the melting thermal characteristics of a microencapsulated phase change plate. Numerical Heat Transfer Part A, 2016, 70 (4): 399-419.
  7. H. Wang, Z.G. Qu*, W. Zhang, L.Q. Zhang. A multi-scale porous composite adsorbent with copper benzene-1,3,5-tricarboxylate coating on copper foam. RSC Advances, 2016, 6: 52888-52897.
  8. L. Zhou, Z.G. Qu*, T. Ding, J.Y. Miao. Lattice Boltzmann simulation of the gas-solid adsorption process in reconstructed random porous media. Physical Review E, 2016, 93, (4): 043101.
  9. X.C. He, M. Lin, J. Guo, Z.G. Qu*, F. Xu*. Experimental and simulation studies of polyarginines across the membrane of giant unilamellar vesicles. RSC Advances, 2016, 6(36): 30454-30459.
  10. H.B. Gao, G.H. Huang, H.J. Li, J. Li, Z.G. Qu*, Y. J. Zhang. Development of stove-powered thermoelectric generator: A review. Applied Thermal Engineering, 2016, 96: 297-310.
  11. H. Wang, Z.G. Qu*, W. Zhang, Q.N. Yu, Y.L. He. Experimental and numerical study of CO2 adsorption on copper benzene-1,3,5-tricarboxylate (Cu-BTC) metal organic framework. International Journal of Heat and Mass Transfer, 2016, 92: 859-863.
  12. H. Liu, Q.N. Yu*, Z.C. Zhang, Z.G. Qu, C.Z. Wang. Analytical solutions for heat transfer efficiency in metallic honeycombs using two-equation method. International Communications in Heat and Mass Transfer, 2016, 75: 147-153.
  13. J. R. Choi, Z. Liu, J. Hu, R.H. Tang, Y. Gong, S.S. Feng, H. Ren, T. Wen, H. Yang, Z.G. Qu, B. Pingguan-Murphy, F. Xu*. Polydimethylsiloxane-Paper hybrid lateral flow assay for highly sensitive point-of-care nucleic acid testing. Analytical chemistry, 2016, 88(12): 6254-6264.
  14. H. Liu, Q.N. Yu*, Z.C. Zhang, Z.G. Qu, C.Z. Wang. Two-equation method for heat transfer efficiency in metal honeycombs: An analytical solution. International Journal of Heat and Mass Transfer, 2016, 97: 201-210.
  15. X.C. He, M. Lin, T.J. Lu, Z.G. Qu*, F. Xu*. Molecular analysis of interactions between PAMAM dendrimer-paclitaxel conjugate and biomembrane. Physical Chemistry Chemical Physics, 2015, 17(44): 29507-29517.
  16. X.C. He, M. Lin, B.Y. Sha, S.S. Feng, X.H. Shi, Z.G. Qu*, F. Xu*. Coarse-grained molecular dynamics studies of the translocation mechanism of polyarginines across asymmetric membrane under tension. Scientific Reports, 2015, 5: 12808.
  17. Z.G. Qu*, Y. H. Bai, L. Pu. One-dimensional numerical study of thermal performance of an organic Rankine cycle system using liquefied natural gas as a cold source for cold energy recovery. Journal of Natural Gas Science and Engineering, 2015, 26: 1399-1413.
  18. L. Zhou, Z.G. Qu*, L. Chen, W.Q. Tao. Lattice Boltzmann simulation of gas-solid adsorption processes at pore scale level. Journal of Computational Physics, 2015, 300: 800-813.
  19. W.Q. Li, Z.G. Qu*. Experimental study of effective thermal conductivity of stainless steel fiber felt.  Applied Thermal Engineering, 2015, 86: 119-126.
  20. Z. G. Qu*, X. B. Feng. Catalytic combustion of premixed methane/air in a two-zone perovskite-based alumina pileup-pellets burner with different pellet diameters. Fuel, 2015, 159: 128-140.
  21. Z.G. Qu*, W.Q. Li, J.J. Zhang, W.Q. Tao. Numerical study of heat conduction with a chemical reaction at the moving frontal surface for a graphite plate. Numerical Heat Transfer, Part A, 2015, 67(2): 189-209.
  22. Z.G. Qu*, H.B. Gao, X.B. Feng, W.Q. Tao. Premixed combustion in a porous burner with different fuels. Combustion Science and Technology, 2015, 187(3): 489-504.
  23. X.C. He#, M. Lin#, F. Li, B.Y. Sha, F. Xu, Z.G. Qu*, L. Wang*. Advances in studies of nanoparticle-biomembrane interactions. Nanomedicine, 2015, 10(1): 121-141.
  24. J. J. Zhang, Z.G. Qu*, R.P. Fu, Y. L. He. Experimental study on the transient thermal characteristics of an integrated deflector under the periodic impingement of a supersonic flame jet. International Journal of Heat and Mass Transfer, 2015, 85: 811-823.
  25. J.J. Zhang, Z.G. Qu*, R.P Fu, W.Q. Tao. Part II: Numerical study on the flow and thermal characteristics of an integrated deflector under the periodic impingement of a supersonic high temperature jet. International Journal of Heat and Mass Transfer, 2015, 85: 1095-1111.
  26. Z. Liu#, J. Hu#, Y.M. Zhao, Z.G. Qu*, F. Xu*. Experimental and numerical studies on liquid wicking into filter papers for paper-based diagnositcs. Applied Thermal Engineering, 2015, 88: 280-287.
  27. Z.B. Liu, Y.L. He*, Y.S. Li, Z.G. Qu, W.Q. Tao. Heat transfer characteristics of supercritical CO2 flow in metal foam tubes. Journal of Supercritical Fluids, 2015, 101: 36-47.
  28. Z.B. Liu, Y.L. He*, Z.G. Qu, W.Q. Tao. Experimental study of heat transfer and pressure drop of supercritical CO2 cooled in metal foam tubes. International Journal of Heat and Mass Transfer, 2015, 85: 679-693.
  29. W.T. Ji, Z.Y. Li*, Z.G. Qu, J.F. Guo, D.C. Zhang, Y.L. He, W.Q. Tao. Film condensing heat transfer of R134a on single horizontal tube coated with open cell copper foam. Applied Thermal Engineering, 2015, 76: 335-343.
  30. H.R. Liu, M. Azarpeyvand, J.J. Wei*, Z.G. Qu. Tandem cylinder aerodynamic sound control using porous coating. Journal of Sound and Vibration, 2015, 334: 190-201.
  31. J.J. Zhang, Z.G. Qu*, H.J. Xu, W.Q. Tao. Semi-analytical solution for fully developed forced convection in metal-foam filled tube with uniform wall temperature. Science China-Technological Sciences, 2014, 57(12): 2487-2499.
  32. H .Wang,  Z.G. Qu*, W. Zhang,  Y.X. Chang, Y. L. He. Experimental and numerical study of CO2 adsorption on Ni/DOBDC metal-organic framework. Applied Thermal Engineering, 2014, 73: 1501-1509.
  33. Z.G. Qu, H. Wang, W. Zhang*, L. Zhou, Y.X. Chang. Prediction and experimental verification of CO2 adsorption on Ni/DOBDC using a genetic algorithm-back-propagation neural network model. Industrial & Engineering Chemistry Research, 2014, 53(30): 12044-12053.
  34. Z.G. Xu, Z.G. Qu*, C.Y. Zhao, W.Q. Tao. Experimental correlation for pool boiling heat transfer on metallic foam surface and bubble cluster growth behavior on grooved array foam surface. International Journal of Heat and Mass Trasnfer, 2014, 77: 1169-1182.
  35. J.J. Zhang, Z.G. Qu*, Z.G. Jin. Experimental study on the thermal characteristics of a microencapsulated phase-change composite plate. Energy, 2014, 71: 94-103.
  36. X.C. He, Z.G. Qu*, F. Xu, M. Lin, J.L. Wang, X.H. Shi, T.J. Lu. Molecular analysis of interactions between dendrimers and asymmetric membranes at different transport stages. Soft Matter, 2014, 10(1): 139-148.
  37. H.J. Xu, Z.G. Qu*, W.Q. Tao. Numerical investigation on self-coupling heat transfer in a counter-flow double-pipe heat exchanger filled with metallic foams. Applied Thermal Engineering, 2014, 66: 43-54.
  38. W.Q. Li, Z.G. Qu*, Y.L. He, Y.B. Tao. Experimental study of a passive thermal management system for high-powered lithium ion batteries using porous metal foam saturated with phase change materials. Journal of Power Sources, 2014, 255: 9-15.       
  39. Z.G. Qu*, W.Q. Li, W.Q. Tao. Numerical model of the passive thermal management system for high-power lithium ion battery by using porous metal foam saturated with phase change material. International Journal of Hydrogen Energy, 2014, 39(8): 3904-3913.
  40. H.B. Gao, Z.G. Qu*, X.B. Feng, W.Q. Tao. Methane/air premixed combustion in a two-layer porous burner with different foam materials. Fuel, 2014, 115: 154-161.
  41. H.B. Gao, Z.G. Qu*, X.B. Feng, W.Q. Tao. Combustion of methane/air mixtures in a two-layer porous burner: A comparison of alumina foams, beads, and honeycombs. Experimental Thermal and Fluid Science, 2014, 52: 215-220.
  42. L. Pu, Z.G. Qu*, Y.H. Bai, D. Qi, K. Song, P. Yi. Thermal performance analysis of intermediate fluid vaporizer for liquefied natural gas. Applied Thermal Engineering, 2014, 65: 564-574.
  43. A. Ozcelik, D. Ahmed, Y.L. Xie, N. Nama, Z.G. Qu, A. A. Nawaz, T. J. Huang*. An acoustofluidic micromixer via bubble inception and cavitation from microchannel sidewalls. Analytical Chemistry, 2014, 86 (10): 5083-5088.
  44. J.P. Wang, J.F. Zhang*, Z.G. Qu, Y.L. He, W.Q. Tao. Comparison of robustness and efficiency for SIMPLE and CLEAR algorithms with 13 High-resolution convection schemes in compressible flows. Numerical Heat Transfer, Part B, 2014, 66(2): 133-161.
  45. J.F. Zhang*, J.P. Wang, Z.G. Qu, Y.L. He, W.Q. Tao. The study of different discretized schemes for density and convection terms in high speed compressible flow using the pressure-based method. Applied Thermal Engineering, 2014, 73: 1533-1540.
  46. C. Wei, Z.J. Liu, Z.Y. Li, Z.G. Qu, Y.L. He, W.Q. Tao*. Numerical study on some improvements in the passive cooling system of a radio base station base on multiscale thermal modeling methodology-Part I: Confirmation of simplified models. Numerical Heat Transfer, Part A-Applications, 2014, 65(9): 844-862.
  47. C. Wei, Z.J. Liu, Z.Y. Li, Z.G. Qu, Y.L. He, W.Q. Tao*. Numerical study on some improvements in the passive cooling system of a radio base station base on multiscale thermal modeling methodology-Part II: Results of multiscale numerical simulation and subsequent improvements of cooling techniques. Numerical Heat Transfer, Part A-Applications, 2014, 65(9): 863-884.
  48. H.R. Liu, J.J. Wei*, Z.G. Qu. The interaction of porous material coating with the near wake of bluff body. ASME Journal of Fluids Engineering, 2014, 136(2): 021302.
  49. B.Y. Sha, W. Gao, S.Q. Wang, X.C. Gou, W. Li, X. Liang, Z.G. Qu, F. Xu*, T.J. Lu*. Oxidative stress increased hepatotoxicity induced by nano-titanium dioxide in BRL-3A cells and Sprague-Dawley rats. Journal of Applied Toxicology, 2014, 34 (4): 345-356.
  50. Z.G. Qu, X.C. He, M. Lin, B.Y. Sha, X.H. Shi, T.J. Lu, F. Xu*. Advances in the understanding of nanomaterial-biomembrane interactions and numerical modeling. Nanomedicine, 2013, 8(6): 995-1011.
  51. Z.G. Qu*, H.J. Xu, W.Q. Tao. Conjugated natural convection in horizontal annuli partially filled with metallic foams by using two-equation model. Journal of Porous Media, 2013, 16(11): 979-995.
  52. W.Q. Li, Z.G. Qu*, B.L. Zhang, K. Zhao, W.Q. Tao. Thermal behavior of porous stainless-steel fiber felt saturated with phase change material. Energy, 2013, 55: 846-852.
  53. H.B. Gao, Z.G. Qu*, W.Q. Tao, Y.L. He. Experimental investigation of methane/(Ar, N2, CO2)-air mixture combustion in a two-layer packed bed burner. Experimental Thermal and Fluid Science, 2013, 44: 599-606.
  54. Z.G. Xu, Z.G. Qu*, C.Y. Zhao, W.Q. Tao. Experimental study of pool boiling heat transfer on metallic foam surface with U-shaped and V-shaped grooves. Journal of Enhanced Heat Transfer, 2012, 19(6): 549-559.
  55. H.B. Gao, Z.G. Qu*, Y.L. He, W.Q. Tao. Experimental study of combustion in a double-layer burner packed with alumina pellets of different diameters. Applied Energy, 2012, 100: 295-302.
  56. Z.G. Qu*, H.J. Xu, W.Q. Tao. Fully developed forced convective heat transfer in an annulus partially filled with metallic foams: An analytical solution. International Journal of Heat and Mass Transfer, 2012, 55(25-26): 7508-7519.
  57. Z.G. Qu*, T.S. Wang, W.Q. Tao, T.J. Lu. Experimental study of air natural convection on metallic foam-sintered plate. International Journal of Heat and Fluid Flow, 2012, 38: 126-132.
  58. Z.G. Qu*, W.Q. Li, J.L. Wang, W.Q. Tao. Passive thermal management using metal foam saturated with phase change material in a heat sink. International Communications in Heat and Mass Transfer, 2012, 39 (10): 1546-1549.
  59. Z.G. Qu*, T.S. Wang, W.Q. Tao, T.J. Lu. A theoretical octet-truss lattice unit cell model for effective thermal conductivity of consolidated porous materials saturated with fluid. Heat and Mass Transfer, 2012, 48(8): 1385-1395.
  60. Z.G. Qu*, H.J. Xu, W.Q. Tao. Numerical simulation of non-equilibrium conjugate heat transfer in tubes partially filled with metallic foams. Journal of Thermal Science and Technology, 2012, 7(1): 151-165.
  61. Z.G. Qu*, Z.G. Xu, C.Y. Zhao, W.Q. Tao. Experimental study of pool boiling heat transfer on horizontal metallic foam surface with crossing and single-directional V-shaped groove in saturated water. International Journal of Multiphase Flow, 2012, 41: 44-45.
  62. Z.G. Qu*, D.G. Li, J.Y. Huang, Z.G. Xu, X.L. Liu, W.Q. Tao. Experimental investigations of pool boiling heat transfer on horizontal plate sintered with metallic fiber felt. International Journal of Green Energy, 2012, 9(1): 22-38.
  63. W.Q. Li, Z.G. Qu*, Y.L. He, W.Q. Tao. Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin. Applied Thermal Engineering, 2012, 37: 1-9.
  64. H.R. Liu, J.J. Wei*, Z.G. Qu. Prediction of aerodynamic noise reduction by using open-cell metal foam. Journal of Sound and Vibration, 2012, 331(7): 1483-1497.
  65. Y.P. Du, C.Y. Zhao*, Y. Tian, Z.G. Qu. Analytical considerations of flow boiling heat transfer in metal-foam filled tubes. Heat and Mass transfer, 2012, 48(1): 165-173.
  66. Y.B. Tao, Y.L. He*, Z.G. Qu. Numerical study on performance of molten salt phase change thermal energy storage system with enhanced tubes. Solar Energy, 2012, 86(5): 1155-1163.
  67. X.Y. Li, W.W. Yang, Y.L. He*, T.S. Zhao, Z.G. Qu. Effect of anode micro-porous layer on species crossover through the membrane of the liquid-feed direct methanol fuel cells. Applied Thermal Engineering, 2012, 48: 392-401.
  68. C. Wei, Z.J. Liu, Z.Y. Li, Z.G. Qu, W.Q. Tao*. Numerical study on some improvements in the passive cooling system of a radio base station. Numerical Heat Transfer Part A, 2012, 62(4): 319-335.
  69. H.J. Xu, Z.G. Qu*, W.Q. Tao. Analytical solution of forced convective heat transfer in tubes partially filled with metallic foam using the two-equation model. International Journal of Heat and Mass Transfer, 2011, 54(17-18): 3846-3855.
  70. Y.P. Du, Z.G. Qu*, H.J Xu, Z.Y. Li, C.Y. Zhao, W.Q. Tao. Numerical simulation of film condensation on vertical plate embedded in metallic foams. Progress in Computational Fluid Dynamics, 2011, 11(3-4): 198-205.
  71. H.J. Xu, Z.G. Qu*, T.J. Lu, Y.L. He, W.Q. Tao. Thermal modeling of forced convection in a parallel-plate channel partially filled with metallic foams. ASME Journal of Heat Transfer, 2011, 133(9): 092603.
  72. W.T. Ji, Z.G. Qu*, Z.Y. Li, J.F. Guo, D.C. Zhang, W.Q. Tao. Pool boiling heat transfer of R134a on single horizontal tube surfaces sintered with open-celled foam. International Journal of Thermal Sciences, 2011, 50(11): 2248-2255.
  73. H.J. Xu, Z.G. Qu*, W.Q. Tao. Thermal transport analysis in parallel-plate channel filled with open-celled metallic foams. International Communications in Heat and Mass Transfer, 2011, 38(7): 868-873.
  74. Z.G. Xu, Z.G. Qu*, C.Y. Zhao, W.Q. Tao. Pool boiling heat transfer on open-celled metallic foam sintered surface under saturation condition. International Journal of Heat and Mass Transfer, 2011, 54(17-18): 3856-3867.
  75. H.B. Gao, Z.G. Qu*, W.Q. Tao, Y.L. He, J. Zhou. Experimental study of biogas combustion in a two-layer packed bed burner, Energy and fuels. 2011, 25(7): 2887-2895.
  76. Y.B. Tao, Y.L. He*, Z.G. Qu, W.Q. Tao. Numerical study on performance and fin efficiency of wavy fin-and-tube heat exchangers. Progress in Computational Fluid Dynamics, 2011, 11(3-4): 246-254.
  77. D.L. Sun, W.Q. Tao*, J.L. Xu, Z.G. Qu. Implementation of the IDEAL algorithm on nonorthogonal curvilinear coordinates for the solution of 3-D incompressible fluid flow and heat transfer problems. Numerical Heat Transfer Part B-Fundamentals, 2011, 59 (2): 147-168.
  78. Y.P. Du, Z.G. Qu*, C.Y. Zhao, W.Q. Tao. Numerical study of conjugated heat transfer in metal foam filled double-pipe. International Journal of Heat and Mass Transfer, 2010, 53 (21-22): 4899-4907. 
  79. C.Y Zhao*, L.N. Dai, G.H. Tang, Z.G. Qu, Z.Y. Li. Numerical study of natural convection in porous media (metals) using Lattice Boltzmann Method (LBM). International Journal of Heat and Fluid Flow, 2010, 31(5): 925-934.
  80. Y.L. Lu, W.H. Zhang, P. Yuan, M.D. Xue, Z.G. Qu, W.Q. Tao*. Experimental study of heat transfer intensification by using a novel combined shelf in food refrigerated display cabinets. Applied Thermal Engineering, 2010, 30(2-3): 85-91.
  81. D.L. Sun, Z.G. Qu, Y.L. He, W.Q. Tao*. Implementation of an efficient segregated algorithm-IDEAL on 3D collocated grid system. Chinese Science Bulletin, 2009, 54(6): 929-942.
  82. D.L. Sun, Z.G. Qu, Y.L. He, W.Q. Tao*. Performance analysis of IDEAL algorithm for three-dimensional incompressible fluid flow and heat transfer problems. International Journal for Numerical Methods in Fluids, 2009, 61(10): 1132-1160.
  83. D.L. Sun, Z.G. Qu, Y.L. He, W.Q. Tao*. An efficient segregated algorithm for incompressible fluid flow and heat transfer problems-IDEAL (Inner Doubly Iterative Efficient Algorithm for Linked Equations) Part Ӏ: Mathematical formulation and solution procedure. Numerical Heat Transfer, Part B, 2008, 53(1): 1-17.
  84. D.L. Sun, Z.G. Qu, Y.L. He, W.Q. Tao*. An efficient segregated algorithm for incompressible fluid flow and heat transfer problems-IDEAL (Inner Doubly Iterative Efficient Algorithm for Linked Equations), Part II: Application examples. Numerical Heat Transfer, Part B, 2008, 53(1): 18-38.
  85. Z.G. Wu, Z.G. Qu, Y.L. He, W.Q. Tao*. A comprehensive performance comparison for segregated algorithms of flow and heat transfer in complicated geometries. Progress in Computational Fluid Dynamics, 2008, 8(5): 233-247.
  86. Z.G. Qu, Y.L. He, C.Y. Zhao, W.Q. Tao*. Implementation of CLEAR algorithm on non-orthogonal curvilinear coordinates for solution of incompressible flow and heat transfer. International Journal of Numerical Methods in Fluids, 2007, 53(7): 1077-1105.
  87. Z.G. Qu, W.Q. Tao*, Y.L. He. An improved numerical scheme for SIMPLER method on nonorthogonal curvilinear coordinates: SIMPLERM. Numerical Heat Transfer, B, 2007, 51(1): 43-66.  
  88. J. Huang, R. Li, Y.L. He*, Z.G. Qu. Solution for variable density low Mach number flows with a compressible pressure-based algorithm. Applied Thermal Engineering, 2007, 27(11-12): 2104-2112.
  89. W.Q. Tao*, W.W. Jin, Y.L. He, Z.G. Qu, C.C. Zhang. Optimum design of two-row slotted fin surface with X-shape strip arrangement positioned by “Front Coarse and Rear Dense” principle, Part I: Physical/mathematical models and numerical methods. Numerical Heat Transfer, Part A, 2006, 50 (8): 731-749.
  90. W.W. Jin, Y.L. He, Z.G. Qu, C.C. Zhang, W.Q. Tao*. Optimum design of two-row slotted fin surface with X-shape strip arrangement positioned by “Front Coarse and Rear Dense” principle, Part II: Results and discussion. Numerical Heat Transfer, Part A, 2006, 50(8): 751-771.
  91. Z.G. Qu, W.Q. Tao*, Y.L. He. Implementation of CLEAR algorithm on collocated grid system and application examples. Numerical Heat Transfer, Par B, 2005, 47(1): 64-96.
  92. W.Q. Tao*, Y.L. He, Z.Y. Li, Z.G. Qu. Some recent advances in finite volume approach and their applications in the study of heat transfer enhancement. International Journal of Thermal Sciences, 2005, 44(7): 623-643.
  93. Z.G. Qu, W.Q. Tao*, Y.L. He. Three-dimensional numerical simulation on laminar heat transfer and fluid flow characteristics of strip fin surface with X-arrangement of strips. ASME Journal of Heat Transfer. 2004, 126(5): 697-707.
  94. W.Q. Tao*, Y.L. He, Z.G. Qu, Y.P. Cheng. Applications of the Field synergy principle in developing new type heat transfer enhanced surfaces. Journal of Enhanced Heat Transfer, 2004, 11(4): 438-451.
  95. Y.L. He*, W.Q. Tao, Z.G. Qu, Z.Q. Chen. Steady natural convection in a vertical cylindrical envelope with adiabatic lateral wall. International Journal of Heat and Mass Transfer, 2004, 47(14-16): 3131-3144.
  96. W.Q. Tao*, Z.G. Qu, Y.L. He. A novel segregated algorithm for incompressible fluid flow and heat transfer problems - CLEAR (Coupled and Linked Equations Algorithm Revised) part II: Application examples. Numerical Heat Transfer, Part B, 2004, 45 (1): 19-48.
  97. W.Q. Tao*, Z.G. Qu, Y.L. He. A novel segregated algorithm for incompressible fluid flow and heat transfer problems - CLEAR (Coupled and Linked Equations Algorithm Revised) part I: Mathematical formulation and solution procedure. Numerical Heat Transfer, Part B, 2004, 45 (1): 1-17.
  98. Y.P. Cheng, Z.G. Qu, W.Q. Tao*, Y.L. He. Numerical design of efficient slotted fin surface based on the field synergy principle. Numerical Heat Transfer, Part A, 2004, 45(6): 517-538.
  99. W.Q. Tao*, Y.L. He, Q.W. Wang, Z.G. Qu, F.Q. Song. A unified analysis on enhancing single phase convective heat transfer with field synergy principle. International Journal of Heat and Mass Transfer, 2002, 45(24): 4871-4879.