Basic Information

    张林杰,男,汉族,工学博士,教授,博士生导师,从事难熔材料激光焊接与增材制造、轻量化材料激光焊接与增材制造、激光加工过程“热-力-冶金-疲劳”仿真研究。中国焊接学会焊接力学及结构设计与制造专业委员会副主任,中国焊接学会高能束及特种焊接专业委员会委员,中国焊接学会计算机辅助焊接工程专业委员会委员,中国焊接学会青年工作委员会常务委员,获陕西高等学校科学技术奖一等奖2项。

 

Educational Experience

2003.03 - 2008.03    西安交通大学       材料加工工程专业(焊接)  博士

2000.09 - 2003.03    西北工业大学       材料加工工程专业(焊接)  硕士

1991.09 - 1995.07    哈尔滨工业大学   焊接工艺及设备专业             学士

Work Experience

2020.01 -                 西安交通大学材料学院焊接所             教授

2015.01 - 2019.12   西安交通大学材料学院焊接所             副教授

2008.07 - 2014.12    西安交通大学材料学院焊接所            讲师

2012.01 - 2013.01    韩国科学技术院                                  BK21博士后

2006.04 - 2007.04    日本大阪大学接合科学研究所             研究员

1995.08 - 2000.08    航天部第四研究院7422厂容器分厂     助理工程师

Honorary Title

已授权的专利和软著:

[37] ZL202210938227.5,西安交通大学,钼合金热管套接接头的组焊方法.

[36] ZL202210877469.8,西安交通大学,氮化铝增强铝合金缸套的制备方法.

[35] ZL202111514324.3,西安交通大学,一种大厚板窄间隙激光填丝焊成形质量的控制方法.

[34] 2023SR0555269,西安交通大学,纳米压痕三位形貌表征结果后处理软件.

[33] 2022SR1293749,西安交通大学, 基于道路实测应变的机车焊接结构疲劳寿命及多级疲劳载荷谱计算软件.

[32] 2022SR0838333,西安交通大学,激光填丝焊接过程金属流动传热行为计算软件.

[31] ZL2021101122148,西安交通大学,一种铁基材料载能束粉末增材修复的集约化方法.

[30] ZL2020108885259,西安交通大学,一种通过渗氮提高钼及钼合金焊接性的方法.

[29] ZL202010879365.1,西安交通大学,通过氮气合金化的方式提高钼及钼合金激光焊接头的方法.

[28] 202010208498.6,西安交通大学,用于电弧增材制造的Al-Zn-Mg系铝合金焊丝及其制备方法.

[27] 2021SR1234926,西安交通大学,激光电弧复合焊气液界面运动驱动力计算软件.

[26] 2021SR1212098,西安交通大学,激光焊接气液界面运动驱动力计算软件.

[25] 2021SR1212096,西安交通大学,基于光路追踪的激光焊接气液界面传热计算软件.

[24] 2021SR1212091,西安交通大学,基于光路追踪的激光电弧复合焊气液界面传热传质计算软件.

[23] 2021SR1212097,西安交通大学,基于渐进式光路追踪的金属铺粉3D打印气液界面传热传质计算软件.

[22] ZL2021105075803, 西安交通大学,面向陶瓷基复合材料及碳/碳复合材料的高温感应钎焊装置.

[21] ZL2021105953085,西安交通大学,促进钛合金增材制造柱状晶向等轴晶转变和组织细化方法.

[20] ZL20210707153337,西安交通大学,一种增材修复用钛焊丝及其制备方法.

[19] ZL2020102729327,西安交通大学,一种钼合金事故容错燃料棒的焊接封装方法.

[18] ZL2020104277150,西安交通大学, 一种基于激光扫描的窄间隙厚板填丝焊接方法.

[17] ZL201910872920.5, 西安交通大学,电弧增材制造应急修复船舶受损Al-Mg系铝合金构件的方法.

[16] ZL201911329190.0,西安交通大学,一种微量微米级RE2O3颗粒多级细化微观组织的钛合金填丝增材制造方法.

[15] ZL201911288776.7,西安交通大学,一种含工艺台阶外部件与薄板基体的激光调制焊接方法.

[14] ZL2019109953513,西安交通大学,基于超声波驻场防止熔池下榻的发卡式接头焊缝控形系统.

[13] ZL2017109097222,西安交通大学,一种基于热循环调控的钼及钼合金激光焊接方法.

[12] ZL2019103421679,西安交通大学,一种钼滤网叠层结构的孔眼嵌填钛粉电阻焊方法.

[11] ZL2019107118863,西安交通大学,一种用于研究钼合金高压环境激光焊接的无增压泵焊接实验装置.

[10] ZL2018116167154,西安交通大学,一种厚板单面填充焊接接头残余应力变形控制方法.

[9] ZL2017102842510,西安交通大学,一种基于微合金化与同步寄生钎焊的钼合金熔焊方法.

[8] ZL2017102834552,西安交通大学, 一种提高钼及钼合金熔焊焊缝强韧性的微合金化方法.

[7] ZL2018102366241,西安交通大学,一种核燃料棒包壳高压充氦与激光焊接成套焊接设备.

[6] ZL2017101340610,西安交通大学,一种用于大长径比燃料棒包壳环焊的激光焊接装置.

[5] ZL2017108126340,西安交通大学,基于波形调制的钼及钼合金对接接头的脉冲激光焊接方法.

[4] ZL2017104333271,西安交通大学,提高机械结合型双金属复合管中覆层与基层结合强度的方法.

[3] ZL2016106171718,西安交通大学,T2紫铜作为过渡层的钛 钢复合板激光填丝对接焊方法.

[2] ZL2016108751826,西安交通大学,一种基于阶梯孔法的内部残余应力测量方法.

[1] ZL2014102137827,西安交通大学,厚钢板激光全穿透焊接熔池三维形状检测及重构方法.

 已发表的学术论文:

2024

[138] Jiaxuan Zhao, Linjie Zhang*, et al. Laser welding of molybdenum socket joint for ultra-high-temperature heat pipes based on niobium alloying[J]. Transactions of Nonferrous Metals Society of China, 2024, Accept.

[137] Jiaxuan Zhao, Linjie Zhang*, et al. Fiber laser fillet welding of Nb1Zr thin tube and molybdenum end-plug in ultra-high temperature heat pipe [J]. Journal of Materials Engineering and Performance, 2024, Accept.

[136] Linjie Zhang, Han Yu, Xueliang Zeng, et al. Influences of Si-Ti combined alloying on microstructures and properties of laser welded socket joints of molybdenum [J]. Optics & Laser Technology, 2024, 175: 110749.

[135] Han Yu, Jiaxuan Zhao, Linjie Zhang*. Effects of filler materials on the microstructural characteristics and mechanical properties of laser-welded lap joints of TAM alloys [J]. International Journal of Refractory Metals and Hard Materials, 2024, 120:106696.

[134] Han Yu, Hongda Zhang, Linjie Zhang*, et al. Effect of the addition of titanium filler on high temperature strength and microstructural characteristics of laser welded tube-end plug socket joints of molybdenum alloy [J]. International Journal of Refractory Metals and Hard Materials, 2024, 120:106598.

[133] Jian Long, Linjie Zhang*, Suck Joo Na, et al. Fracture toughness of electron-beam-welded parts of super-thick TC4-DT Ti alloy for aeronautical use [J]. Engineering Fracture Mechanics, 2024, 298: 109927.

[132] M.X. Xie, Q.K. Xin, J. Long, L.J. Zhang, et al. Effects of root gap on anti-fatigue properties of fillet welds for a tie rod seat of locomotive bogie [J]. Journal of Mechanical Science and Technology, 2024, 38(6): 187–199.

[131] Feipeng An, Xiwang Liu, Hongda Zhang, Linjie Zhang*, et al. Comparison of performance of laser powder bed fusion thin-walled TC11 alloy samples welded via laser welding and electron beam welding[J]. Optics & Laser Technology, 2024, 170: 110256.

[130] Hongda Zhang, Han Yu, Linjie Zhang*, et al. Experimental research on micro-drilling of refractory material tungsten by multi-pulse femtosecond laser ablation[J]. Optics & Laser Technology, 2024, 168: 109962.

[129] J. Ning, L.Z. Pan, L.J. Zhang*, et al. Laser-welded butt joints of Ti2AlNb/42CrMo steel with addition of V interlayer[J]. Journal of Materials Research and Technology, 2024, 28: 3422-3434.

[128] Lei Zhu, Qiang Zhou, Congbin Song Linjie Liu, Linjie Zhang, et al. Microstructure and mechanical properties of T2 copper /316L stainless steel explosive welding composite with small size wavy interface[J]. Journal of Materials Research and Technology, 2024, 28: 668-682.

[127] Jian Long, Linjie Zhang*, et al.Effect of post-welding heat treatment on microstructure and properties of electron beam welding joint of new high-strength TB18 titanium alloy[J]. Welding in the World, 2024, 68: 155–162.

2023

[126] Jian Long, Linjie Zhang*, et al.Comparison of low-cycle fatigue properties of two kinds of high energy beam welded joints of TC4 alloy[J]. Transactions of Nonferrous Metals Society of China, 2023, 33(11): 3376-3386.

[1251] Han Yu, Hongda Zhang*, Linjie Zhang*, et al. Regulation of performance of laser-welded socket joint of Mo-14Re ultra- high-temperature heat pipe by introducing Ti into both weld and heat affected zone[J]. Journal of Materials Research and echnology, 2023, 22: 569-584.

[124] M.X. Xie, Q.K. Xin, J. Long, L.J. Zhang, et al. Fatigue life analysis of fillet weld with root gap in bogie tie rod seat under road traffic load[J]. Engineering Failure Analysis, 2023, 153(1):107596.

[123] Feipeng An, Xiwang Liu, Linjie Zhang*, et al. Dramatic improvement of the strength of laser welded joints of Nb521 to GH3128 by adding pure copper as an interlayer[J]. Journal of Materials Research and Technology, 2023, 116: 106367.

[122] Liang Liang Zhang, Yang Zhou, Linjie Zhang, et al. Effect of niobium on the mechanical strength of the laser beam welding joints of molybdenum[J]. Journal of Materials Research and Technology, 2023, 113: 106207.

[121] Feipeng An, Zhengxiong Ma, Kun Sun, Linjie Zhang*, et al. Influences of the Ag content on microstructures and properties of Zn-3Mg-xAg alloy by spark plasma sintering[J]. Journal of Materials Research and Technology, 2023, 24: 595-607

2022

[120] Feipeng An, Linjie Zhang, Jie Ning et al.Influence of annealing on the microstructure and Charpy impact toughness of wire arc additive manufactured Ti5111 alloy[J]. Materials Science and Engineering A, 2022, 860: 144255..

[119] Long J., Zhang LJ., Ning J. et al. Effect of ambient pressure change on pure tungsten laser spot welding [J]. Welding in the World, 2022, 66: 2403.

[118] Jie Ning, Zheng-Xiong Ma, Lin-Jie Zhang, Di-Pin Wang, Suck-Joo Na. Effects of magnesium on microstructure, properties and degradation behaviors of zinc-based alloys prepared by selective laser melting [J]. Materials Research Express, 2022, 9(8): 086511.

[117] Jian Long, Jin-Long Jia, Lin-Jie Zhang, Ming-Xiang Zhuang, Jiu-Hui Wu, Fatigue inhomogeneity of 140 mm thick TC4 titanium alloy double-sided electron beam welded joints [J]. International Journal of Fatigue, 2022, 165: 107214.

[116] Mirza Zahid Hussain, Jiangtao Xiong, Jinglong Li, Farah Siddique, Lin Jie Zhang et al. Structural characterization of a composite joint prepared during laser welding of Ti–22Al–27Nb intermetallic alloy with an interlayer of Cu-Hf-Ni-Ti-Zr high entropy bulk metallic glass [J]. Composites Part B: Engineering, 2022, 243: 110167.

[115] Jian Long, Jie Ning, Linjie Zhang, Suck-Joo Na. Fiber laser spot welding of Mg–10Li–3Al–3Zn alloy in a hyperbaric environment [J]. Applied Physics B, 2022, 128: 114.

[114] Liang Liang Zhang, Linjie Zhang, Qing-Jie Yang. Weldability of Molybdenum–Rhenium Alloy Based on a Single-Mode Fiber Laser [J]. Metals, 2022, 12(5), 841.

[113] Jie Ning, Jia-Hao Wen, Lin-Jie Zhang, Suck-Joo Na, Assessment of the universality of duplex stainless steel powder in laser additive repair based on Schaeffler diagram [J]. Additive Manufacturing 2022, 55: 102864.

[112] Han Yu, Long-Zheng Pan, Linjie Zhang et al. Effect of Beam Oscillating and Nitrogen Alloying Upon Microstructure and Mechanical Properties in Laser Welding of Molybdenum Alloy [J]. Transactions of the China Welding Institution, 2022 43(5): 49-55.

[111] Cheng, PX., Zhang, LJ., Ning, J. et al. Effects of Addition of Titanium on Microstructures and Properties of Laser Butt Welded Joints of Mo–30W Alloy [J]. J. of Materi Eng and Perform2022 https://doi.org/10.1007/s11665-022-06863-9.

[110] Xiang Wang, Lin-Jie Zhang, Jie Ning, Suck-joo Na, Fluid thermodynamic simulation of Ti-6Al-4V alloy in laser wire deposition [J]. 3D Printing and Additive Manufacturing, 2022. doi.org/10.1089/3dp.2021.0159.

[109 Mirza Zahid Hussain, Xiong Jiangtao, Li Jinglong, Farah Siddique, Lin Jie Zhang, Xian Rong Zhou [J]. Effect of Ta microalloying on joint performance by tailoring the microstructure during laser beam welding of Ti-22Al-27Nb, Materials Science and Engineering: A, 2022, 845: 143157.

[108] Jian Long, Lin-Jie Zhang, Ming-Xiang Zhuang, Li-an Bai, Suck-Joo Na, Narrow-gap laser welding with beam wobbling and filler wire and microstructural performance of joints of thick TC4 titanium alloy plates [J]. Optics & Laser Technology, 2022, 152: 108089.

[107] Mirza Zahid Hussain, Jiangtao Xiong, Jinglong Li, Farah Siddique, Lin Jie Zhang, Yajie Du, Xian Rong Zhou, Effect of Ti-Hf-Zr-Cu-Ni high entropy alloy addition on laser beam welded joint of Ti2AlNb based intermetallic alloy [J]. Journal of Materials Science & Technology, 2022, 120: 214-226.

[106] Long, J, Zhang, L-J, Zhang, L-X, Wu, J, Zhuang, M-X. Comparison of fatigue performance of TC4 titanium alloy welded by electron beam welding and laser welding with filler wire [J]. Fatigue Fract Eng Mater Struct. 2022; 45( 4): 991- 1004.

[105] Jie Ning, Hai-Bo Zhang, Su-Ming Chen, Lin-Jie Zhang, Suck Joo Na, Intensive laser repair through additive manufacturing of high-strength martensitic stainless steel powders (II): evaluation of intensive repair ability of high strength martensitic steel powder based on Schaeffler diagram [J]. Journal of Materials Research and Technology, 2022, 16: 1494-1507.

[104] Pubo Li, Luyao Chen, Bintao Wu, Linjie Zhang, Mangmang Gao, Strength-ductility synergy of reduced graphene oxide/2024Al matrix composites by heterogeneous structure design and hybrid nanoparticles optimized interface [J]. Journal of Alloys and Compounds, 2022, 898: 162757.

2021

[103] Xiang Wang, Linjie Zhang*, Jie Ning, et al. Fe element promotes the transformation from columnar to equiaxed grains and the formation of ultrafine microstructure of Ti-6Al-4V alloy by laser wire deposition[J]. Additive Manufacturing, 2021, 48: 102442.

[102] Sang-Woo Han, Won-Ik Cho, Linjie Zhang, Suck-Joo Na*. Coupled Simulation of Thermal-Metallurgical-Mechanical Behavior in Laser Keyhole Welding of AH36 Steel [J]. Materials & Design, 2021, 212: 110275.

[101] Xiang Wang, Linjie Zhang*, Jie Ning, Suck-Joo Na. Effect of Cu-induced eutectoid transformation on microstructure and mechanical properties of Ti–6Al–4V alloy by laser wire deposition [J]. Materials Science and Engineering A, 2021, 142316.

[100] Zheng-Xiong Ma, Jie Ning, Bing Yu, Linjie Zhang*, et al. Effects of process parameters and scanning patterns on quality of thin-walled copper flanges manufactured by selective laser melting [J]. Journal of Manufacturing Processes, 2021, 72: 419-430.

[99] Zheng-Xiong Ma, Pei-Xin Cheng, Jie Ning, Lin-Jie Zhang and Suck-Joo Na. Innovations in Monitoring, Control and Design of Laser and Laser-Arc Hybrid Welding Processes [J]. Metals, 2021, 11: 1910.

[98] Jie Ning, Hai-Bo Zhang, Su-Ming Chen, Linjie Zhang*, et al. Intensive laser repair through additive manufacturing of high-strength martensitic stainless steel powders (I) –powder preparation, laser cladding and microstructures and properties of laser-cladded metals[J]. Journal of Materials Research and Technology, 2021, 15: 5746-5761.

[97] Sen Li, Linjie Zhang*, Jie Ning, et al. Microstructures and properties of wire-arc additively manufactured 5356 aluminium alloy protected by different proportions of nitrogen and argon [J]. Journal of Materials Science, 2021, 56: 17785-17804.

[96] Zhuang MX, Liu YQ, Liu B, Wang WX, Long J., Zhang LJ*. Microstructure and Properties of Double-side and Double-pass Unequal Penetration EBW TC4 Joint in Hollowed-out Load-bearing Thick Beam [J]. Rare Metal Materials and Engineering, 2021, 50(8): 2933-2940.

[95] Liang-Liang Zhang, Lin-Jie Zhang*, Jie Ning, et al. Effect of various combinations of Ti and Zr interlayers on the tensile properties of laser welded joints of molybdenum [J]. International Journal of Refractory Metals and Hard Materials, 2021, 101:105662.

[94] Liang-Liang Zhang, Lin-Jie Zhang*, Jie Ning, et al. On the laser gas (N2) alloying in the welding of molybdenum alloy [J]. Journal of Materials Processing Technology, 2021, 296(1): 117184.

[93] Wei Ma, Jie Ning, Lin-Jie Zhang, Suck-Joo Na. Regulation of microstructures and properties of molybdenum silicon boron alloy subjected to selective laser melting [J]. Journal of Manufacturing Processes, 2021,69: 593-601.

[92] Xian-Rong Zhou, Jie Ning, Suck-Joo Na, Lin-Jie Zhang. Microstructures and properties of the dissimilar joint of pure molybdenum/T2 copper by single-mode laser welding [J]. International Journal of Refractory Metals and Hard Materials, 2021, 101: 105667.

[91] Liang-Liang Zhang, Lin-Jie Zhang*, Jie Ning, et al. Strengthening mechanisms of combined alloying with carbon and titanium on laser beam welded joints of molybdenum alloy [J]. Journal of Manufacturing Processes, 2021, 68(3):1637-1649.

[90] Xiang Wang, Lin-Jie Zhang*, Jie Ning, et al. Hierarchical grain refinement during the laser additive manufacturing of Ti-6Al-4V alloys by the addition of micron-sized refractory particles [J]. Additive Manufacturing, 2021, 45: 102045.

[89] Jian Long, Lin-Jie Zhang*, Jie Ning, et al. Zoning study on the fatigue crack propagation behaviors of a double-sided electron beam welded joint of TC4 titanium alloy with the thickness of 140mm [J]. International Journal of Fatigue, 2021, 146: 106145.

[88] Jian Long, Lin-Jie Zhang*, Jie Ning, et al. Effects of post-weld heat treatment on microstructures and properties of laser welded joints of new high-strength Ti-55531 alloy [J]. Journal of Manufacturing Processes, 2021, 64:1329-1335.

[87] Sang-Woo Han, Cho Won-Ik , Lin-Jie Zhang , Suck-Joo Na, et al. A study on laser keyhole welding in vacuum by computational fluid dynamics simulations with plume effect models [J]. Journal of Laser Applications, 2021, 33(1): 12042.

[86] Sen Li, Ning J, Gui-Feng Zhang, Lin-Jie Zhang*, et al. Microstructural and mechanical properties of wire-arc additively manufactured Al–Zn–Mg aluminum alloy: The comparison of as-deposited and heat-treated samples [J]. Vacuum, 2021, 184(6):109860.

[85] Jian Long, Lin-Jie Zhang*, Jie Ning, et al. Dynamic behavior of plasma and molten pool of pure titanium during hyperbaric laser welding [J]. Infrared Physics & Technology, 2021, 115(10):103686.

[84]Jian Long, Lin-Jie Zhang*, Jie Ning, et al. Instantaneous phenomena during the pulsed fiber laser welding of pure zirconium in a hyperbaric environment [J]. Optics Communications, 2021, 490: 126868.

[83] Liang-Liang Zhang, Lin-Jie Zhang*, Jie Ning, et al. On the role of pre-nitriding on improving the weldability of molybdenum alloy [J]. Materials & Design, 2021, 198(3):109377.

[82] Xiang Wang, Lin-Jie Zhang*, Jie Ning, et al. Effect of addition of micron-sized lanthanum oxide particles on morphologies, microstructures and properties of the wire laser additively manufactured Ti–6Al–4V alloy [J]. Materials Science and Engineering A, 2021, 803:140475.

[81] Jian Long, Lin-Jie Zhang*, Jie Ning, et al. Analysis of heterogeneity of fatigue properties of double-sided electron beam welded 140-mm thick TC4 titanium alloy joints [J]. International Journal of Fatigue, 2021, 142: 105942.

[80] Jie Ning, Lin-Jie Zhang*, Bai-Yu Yang, Yuan-Jun Sun, et al. Improved quality of resistance spot welded joints for molybdenum sheets in lap configuration by adding titanium interlayer [J]. Materials Research Express, 2021, 8(6):066522.

[79] Jie Ning, Suck-Joo Na, Lin-Jie Zhang, Chen-Hong Wang. A comparison of laser-metal inert gas hybrid welding and metal inert gas welding of high-nitrogen austenitic stainless steel [J]. Journal of Materials Research and Technology, 2021, 13(2):1841-1854.

[78] Jie Ning, Suck-Joo Na*, Lin-Jie Zhang, et al. Improving thermal efficiency and stability of laser welding process for magnesium alloy by combining power modulation and subatmospheric environment [J]. Journal of Magnesium and Alloys, 2021.

2020 

[77] Sen LiLin-Jie Zhang, et al.  Microstructures and mechanical properties of Al-Zn-Mg aluminium alloy components produced by wire + arc additive manufacturing  [J],  Journal of Materials Research and Technology, 2020.  (IF=5.29)

[76] Jian LongLin-Jie Zhang*, et al. Analysis of heterogeneity of fatigue properties of an ultra-thick joints [J], International Journal of Fatigue, 2020.

[75] Jian Long, Lin-Jie Zhang*, et al. The influence of pressures in a hyperbaric environment on the penetration during pulsed laser welding of 304 stainless steels and underlying mechanism [J], Journal of Laser Applications , 2020.

[74] Lin-Jie ZhangHai-Bo Zhang*, et al.  Laser processing of Mg-10Li-3Al-3Zn alloy: Part - Microstructure and properties of laser welded joints [J], Journal of Manufacturing Processes, 2020.

[73] Liang-Liang Zhang, Lin-Jie Zhang*, et al. Improvement in the weldability of molybdenum alloy by pre-welding solid carburising [J], Journal of Materials Science & Technology, 2020. (IF=5.04)

[72] Hai-Bo Zhang, Lin-Jie Zhang*, et al. Microstructures and performances of the butt joint of TA1/Q235B bimetallic sheet with addition of a Mo interlayer by using narrow gap laser welding with filler wire [J],  Journal of Materials Research and Technology, 2020.  (IF=5.29)

[71] Ning J, Zhang LJ*, et al. Effects of power modulation on behaviours of molten pool and keyhole during laser–arc hybrid welding of pure copper [J], Materials & Design, 2020, 194: 108829. (IF=6.289)

[70] Lin-Jie Zhang, Hai-Bo Zhang*, et al. Laser processing of Mg-10Li-3Al-3Zn alloy:Part II- Improving corrosion resistance of multi-phase Mg alloys by laser surface processing [J], Journal of Manufacturing Processes, 2020, 56: 571-580.

[69] Lin-Jie Zhang, Ru-Yuan Ma*, Yan-Bin Zhang, Qian Guo, Chen-Hong Wang, Jian-Xun Zhang, Suck-Joo Na. Investigation on dissimilar laser beam welding of molybdenum to zirconium via pure titanium interlayer [J]. Optics and Laser Technology, 2020, 131: 106327.

[68] Jian LongLin-Jie Zhang*, et al. Towards better understanding of hyperbaric fiber laser spot welding of metallic material [J], Journal of Manufacturing Processes, 2020. 56: 372-381.

[67] Jiahao WenLin-Jie Zhang, Jie Ning, et al. Laser additively manufactured intensive dual-phase steels and their microstructures, properties and corrosion resistance [J], Materials & Design, 2020, 169: 107681. (IF=6.289)

[66] Sen LiLin-Jie Zhang, Jie Ning, et al. Comparative study on the microstructures and properties of wire+arc additively manufactured 5356 aluminium alloy with argon and nitrogen as the shielding gas [J], Additive Manufacturing, 2020,101206. (IF=7.002)

[65] Lin-Jie Zhang, Qian Guo*, et al. Evolution of microstructures and performance of laser welded GH3128/Mo dissimilar joints [J], Journal of Materials Engineering and Performance, 2020, 29:1792–1809.

[64] Jian Long, Lin-Jie Zhang*, et al. Fiber laser spot welding of molybdenum alloy in a hyperbaric environment[J], Optics Express, 2020, 28(6): 7843-7857.

[63] Jian Long, Lin-Jie Zhang*, Liang-Liang Zhang, Xiang Wang, Gui-Feng Zhang, Jian-Xun Zhang. Effects of minor Zr addition on the microstructure and mechanical properties of laser welded joint of Al/SiCp metal-matrix composite [J], Journal of Manufacturing Processes, 2020, 49: 373–384.

[62] Jian Long, Lin-Jie Zhang*, Qun-Bing Zhang, Wen-Ke Wang, Jie Zhong, Jian-Xun Zhang. Microstructural characteristics and low cycle fatigue properties at 230°C of different weld zone materials from a 100mm thick dissimilar weld of ultra-supercritical rotor steel [J], International Journal of Fatigue, 2020, 130: 105248.

2019

[61] Liang-Liang Zhang, Lin-Jie Zhang*, Jian Long, Jie Ning, Jian-Xun Zhang, Suck-Joo Na. Effects of titanium on grain boundary strength in molybdenum laser weld bead and formation and strengthening mechanisms of brazing layer [J]. Materials & Design, 2019, 169: 107681.

[60] Lin-Jie Zhang, Jiang-Zhe Liu*, Jun-Yu Pei, Jie Ning, Liang-Liang Zhang, Jian Long, Gui-Feng Zhang, Jian-Xun Zhang, Suck-Joo Na. Effects of Power Modulation, Multipass Remelting and Zr Addition Upon Porosity Defects in Laser Seal Welding of End Plug to Thin-Walled Molybdenum Alloy [J]. Journal of Manufacturing Processes, 2019, 41: 197–207.

[59] Liang-Liang Zhang, Lin-Jie Zhang, Jian Long, Xu Sun, Jian-Xun Zhang, Suck-Joo Na. Enhanced mechanical performance of fusion zone in laser beam welding joint of molybdenum alloy due to solid carburizing [J]. Materials and Design, 2019, 181: 107957.

[58] Lin-Jie Zhang, Chen-Hong Wang*, Yan-Bin Zhang, Qian Guo, Ru-Yuan Ma, Jian-Xun Zhang, Suck-Joo Na. The mechanical properties and interface bonding mechanism of Molybdenum/SUS304L by laser beam welding with nickel interlayer [J]. Materials and Design, 2019, 182: 108002.

[57] Jie Ning, Lin-Jie Zhang*, Cheng-qian Han, Hai-Bo Zhang, Xiao-Wei Lei, Bai-Feng Han. Fiber laser welding characteristics of the butt welded joint of novel ultralight Mg-10.1Li-3.1Al-2.9Zn alloy [J]. Materials Research Express, 2019, 6(10): 106545.

[56] Zhifen Zhang, Linjie Zhang, Guangrui Wen*. Study of inner porosity detection for Al-Mg alloy in arc welding through on-line optical spectroscopy: Correlation and feature reduction [J]. Journal of Manufacturing Processes. 2019, 39: 79-92.

[55] Ning J, Zhang LJ*, Yin XQ, Zhang JX, Na SJ. Mechanism study on the effects of power modulation on energy coupling efficiency in infrared laser welding of high-reflectivity materials [J], Materials & Design, 2019, 178(15): 10871.

[54] Ning J, Zhang LJ*, Yang JN, Yin XQ, Wang XW, Wu J. Characteristics of multi-pass narrow-gap laser welding of D406A ultra-high strength steel [J]. J Mater Process Tech, 2019, 270: 168-181.

[53] Ning J, Hong KM, Inamke GV, Shin YC*, Zhang LJ. Analysis of microstructure and mechanical strength of lap joints of TZM alloy welded by a fiber laser [J]. J Manuf Process, 2019, 39: 146-159.

[52] Zhang Lin-Jie, Liu Jiang-Zhe*, Bai Qing-Lin, Wang Xue-Wu, Sun Yuan-Jun, Li Si-Gong, Gong Xing, Effect of preheating on the microstructure and properties of fiber laser welded girth joint of thin-walled nanostructured Mo alloy [J], International Journal of Refractory Metals and Hard Materials, 2019, 78: 219-227.

[51] Lin-Jie Zhang, Jun-Yu Pei*, Liang-Liang Zhang, Jian Long, Jian-Xun Zhang, Suck-Joo Na, Laser seal welding of end plug to thin-walled nanostructured high-strength molybdenum alloy cladding with a zirconium interlayer [J], Journal of Materials Processing Technology, 2019, 267: 338-347.

[50] Lin-Jie Zhang, Guang-Feng Lu*, Jie Ning, Qi Zhu, Jian-Xun Zhang, Suck-Joo Na, Effects of minor Zr addition on the microstructure and mechanical properties of laser welded dissimilar joint of titanium and molybdenum [J], Materials Science & Engineering A, 2019, 742: 788-797.

2018

[49] Zhang Linjie, Lu Guangfeng*, Ning Jie, Zhang Liangliang, Long Jian, Zhang Guifeng, Influence of Beam Offset on Dissimilar Laser Welding of Molybdenum to Titanium[J], Materials, 2018, 11(10): 1852.

[48]Zhang L J, Pei J Y*, Long J, et al. Effects of Laser Welding and Post-Weld Heat Treatment on Microstructure and Mechanical Properties of Aged Ti55531 Alloy [J]. Materials, 2018, 11(10): 1907.

[47] Yang J N, Zhang L J*, Ning J, et al. Fiber laser welding characteristics of commercially pure zirconium (R60702) and structure-mechanics-corrosion performances of the joint [J]. International Journal of Refractory Metals & Hard Materials, 2018, 73: 58-73.

[46] Gao X L, Liu J, Zhang L J. Dissimilar metal welding of Ti6Al4V and Inconel 718 through pulsed laser welding-induced eutectic reaction technology [J]. International Journal of Advanced Manufacturing Technology, 2018, 96(1-4): 1061-1071.

[45] Lu G F, Zhang L J*, Pei Y, Ning J, Zhang J X. Study on the Size Effects of H-Shaped Fusion Zone of Fiber Laser Welded AZ31 Joint [J]. Metals, 2018, 8: 198. 

[44] Liu J Z, Zhang L J*, Yang H X, et al. Enhancement of corrosion protection performance of SUS304/Q235B dissimilar metals lap joint through fiber laser [J]. International Journal of Advanced Manufacturing Technology, 2018, 96(1–4): 789-802.

2017

[43] Jian-Nan Yang, Lin-Jie Zhang*, Jie Ning, Qing-Lin Bai, Xian-Qing Yin, Jian-Xun Zhang. Single pass laser-MIG hybrid welding of 8-mm thick pure copper (T2) without preheating: Microstructure and properties [J]. Applied Thermal Engineering, 2017,126: 867–883.

[42] Ning-Nian Gou, Lin-Jie Zhang*, Jian-Xun Zhang. Increased quality and welding efficiency of laser butt welding of 2205/X65 bimetallic sheets with a lagging MIG arc [J]. Journal of Materials Processing Technology, 2017, (Available online 16 August 2017).

[41] Ning Jie, Zhang Linjie*, Zhang Xingjun. Energy Coupling Behavior in Modulated Fiber Laser Welding of High Reflectivity AZ31 Magnesium Alloy [J]. RARE METAL MATERIALS AND ENGINEERING, 2017, 46(5): 1437-1444.

[40] Jian-Nan Yang, Lin-Jie Zhang*, Jie Ning, Qing-Lin Bai, Xian-Qing Yin, Jian-Xun Zhang. Single-pass hybrid laser-MIG welding of 8-mm-thick pure copper (T2) without preheating: weld geometry and integrity [J]. International Journal of Advanced Manufacturing Technology, 2017,91(9-12):3749-3773

[39] Ning J, Zhang L J*, Bai Q L, et al. Comparison of the microstructure and mechanical performance of 2A97 Al-Li alloy joints between autogenous and non-autogenous laser welding[J]. Materials & Design, 2017, 120:144–156.

[38] Jie Ning, Lin-Jie Zhang*, Gui-chuan Jiang, Miao-xia Xie, Xian-qing Yin, Jian-xun Zhang. Narrow gap multi-pass laser butt welding of explosion welded CP-Ti/Q235B bimetallic sheet by using a copper interlayer [J]. Journal of Alloys and Compounds, 2017, 701: 587-602.

[37] Bai QL, Zhang L J*, Xie MX, et al. An investigation into the inhomogeneity of the microstructure and mechanical properties of explosive welded H62-brass/Q235B-steel clad plates [J]. International Journal of Advanced Manufacturing Technology, 2017, 90(5): 1351-1363.

[36] Jie Ning, Lin-Jie Zhang*, Meng-Jun Sun, Xian-Qing Yin, Jing Niu, Jian-Xun Zhang. Studies of the characteristics and size effects of softened zone of laser welded 20MnTiB joint [J]. Journal of Materials Processing Technology, 2017, 243: 405-419.

[35] Jie Ning, Lin-jie Zhang*, Miao-xia Xie, Han-Xin Yang, Xian-qing Yin, Jian-xun Zhang. Microstructure and property inhomogeneity investigations of bonded Zr/Ti/steel trimetallic sheet fabricated by explosive welding [J]. Journal of Alloys and Compounds, 2017, 698: 835-851.

[34]  Ning J., Zhang L. J.*, Na S. J., Yin X. Q., Niu J., Zhang J. X., et al..Numerical study of the effect of laser-arc distance on laser energy coupling in pulsed Nd:YAG laser/TIG hybrid welding [J]. International Journal of Advanced Manufacturing Technology, 2017, 91(1-4):1129-1143.

2016

[33] Zhang L J, Bai Q L*, Ning J, et al. A comparative study on the microstructure and properties of copper joint between MIG welding and laser-MIG hybrid welding [J]. Materials & Design, 2016, 110:35-50.

[32] Ning J, Zhang L J*, Wang A, et al. Effects of double-pass welding and extrusion on properties of fiber laser welded 1.5-mm thick T2 copper joints [J]. Journal of Materials Processing Technology, 2016, 237:75-87.

[31] Zhang L J, Na S J*, Zhang J X. Using arc pressure to investigate the effects of energy source distance on arc plasma behaviour in pulsed Nd:YAG laser/tungsten inert gas (TIG) arc hybrid welding [J]. Lasers in Engineering, 2016, 33(4-6): 279-292.

[30] Zhang L J, Zhang G F*, Bai X Y, et al. Effect of the process parameters on the three-dimensional shape of molten pool during full-penetration laser welding process [J]. International Journal of Advanced Manufacturing Technology, 2016, 86(5-8):1273-1286.

[29] Zhang Gui-Feng, Zhang Lin-Jie*, et al. Development of friction stir spot brazing (FSSB) [J]. Materials & Design, 2016, 94: 502-514.

[28] Gou N N, Zhang J X*, Zhang L J, et al. Single pass fiber laser butt welding of explosively welded 2205/X65 bimetallic sheets and study on the properties of the welded joint [J]. International Journal of Advanced Manufacturing Technology, 2016, 86(9-12):1-11.

2015

[27] Xie Miao-Xia, Zhang Lin-Jie*, et al. Microstructure and mechanical properties of CP-Ti_X65 bimetallic sheets fabricated by explosive welding and hot rolling [J]. Materials & Design, 2015, 87:181-197.

[26] Zhang Lin-Jie, Zhang Gui-Feng*, et al. Microstructure and properties of the laser butt welded 1.5-mm thick T2 copper joint achieved at high welding speed [J]. Materials & Design, 2015, 88:720-736. 

[25] Zhang L J, Ning J*, et al. Single pass hybrid laser–MIG welding of 4-mm thick copper without preheating [J]. Materials & Design, 2015, 74: 1-18.

[24] Wu Bo, Zhang Lin-Jie*, Zhang Jian-Xun, et al. An investigation of ultrasonic nanocrystal surface modification machining process by numerical simulation [J]. Advances in Engineering Software, 83:59-69, 2015.

[23] Liu J, Gao X L, Zhang L J*, et al. Effects of the Heterogeneity in the Electron Beam Welded Joint on Mechanical Properties of Ti6Al4V Alloy [J]. Journal of Materials Engineering and Performance, 2015, 24(1):319-328.

[22] Zhang GF*, Liao XJ, Chen B, Zhang L J, et al. Approach to In-Situ Producing Reinforcing Phase Within an Active-Transient Liquid Phase Bond Seam for Aluminum Matrix Composite[J]. Metallurgical and Materials Transactions A, 2015, 46(6):2568-2578.

[21]Powell, J., Ilar, T., Frostevarg, J., Torkamany, M. J., Na, S J, & Petring, D., L J Zhang, et al. Powell J, Ilar T, Frostevarg J, et al. Weld root instabilities in fiber laser welding[J]. Journal of Laser Applications, 2015, 27: S29008.

[20]Zhang L J, Zhang X J, Ning J*, et al. Modulated fiber laser welding of high reflective AZ31[J]. The International Journal of Advanced Manufacturing Technology, 2015, 76(1):721-733.

2014

[19] Zhang L J*, Zhang, J. X., Gumenyuk, A., Rethmeier, M., Na, S. J*. Numerical simulation of full penetration laser welding of thick steel plate with high power high brightness laser [J]. Journal of Materials Processing Technology, 2014, 214(8): 1710-1720.

[18] Zhang L J*, Pei Q, Zhang J X, et al. Study on the microstructure and mechanical properties of explosive welded 2205/X65 bimetallic sheet[J]. Materials & Design, 2014, 64: 462-476.

[17] Zhang L J, Gao X L*, Sun M J, et al. Weld outline comparison between various pulsed Nd: YAG laser welding and pulsed Nd: YAG laser–TIG arc welding [J]. The International Journal of Advanced Manufacturing Technology, 2014, 75(1-4): 153-160.

[16] Liu J, Gao X L, Zhang L J*. On the Use of Infrared Thermography for Analysis of Fatigue Damage in Ti6Al4V-Welded Joints [J]. Journal of Materials Engineering and Performance, 2014, 23(8):2965-2972.

[15] Gao X L, Zhang L J*, Liu J, et al. Porosity and microstructure in pulsed Nd: YAG laser welded Ti6Al4V sheet [J]. Journal of Materials Processing Technology, 2014, 214(7): 1316-1325.

[14] Gao X L, Zhang L J*, Liu J, et al. Effects of weld cross-section profiles and microstructure on properties of pulsed Nd: YAG laser welding of Ti6Al4V sheet [J]. The International Journal of Advanced Manufacturing Technology, 2014, 72(5-8): 895-903.

[13] Tan L, Zhang L J*, Zhang J X, et al. Effect of geometric construction on residual stress distribution in designing a nuclear rotor joined by multipass narrow gap welding[J]. Fusion Engineering and Design, 2014, 89(4): 456-465.

[12] Liu J, Gao X L, Zhang L J*, et al. A study of fatigue damage evolution on pulsed Nd: YAG Ti6Al4V laser welded joints [J]. Engineering Fracture Mechanics, 2014, 117: 84-93.

[11] Gao X L, Liu J, Zhang L J*, et al. Effect of the overlapping factor on the microstructure and mechanical properties of pulsed Nd: YAG laser welded Ti6Al4V sheets [J]. Materials Characterization, 2014, 93: 136-149.

[10] Bo Wu, Jianxun Zhang*, Linjie Zhang, et al. Effect of ultrasonic nanocrystal surface modification on surface and fatigue properties of quenching and tempering S45C steel [J]. Applied Surface Science, 2014, 321: 318-330.

2013

[9] Gao X L, Zhang L J*, Liu J, et al. A comparative study of pulsed Nd: YAG laser welding and TIG welding of thin Ti6Al4V titanium alloy plate [J]. Materials Science and Engineering: A, 2013, 559: 14-21.

2011

[8] Zhang L J*, Zhang J X, Zhang G F, et al. An investigation on the effects of side assisting gas flow and metallic vapour jet on the stability of keyhole and molten pool during laser full-penetration welding [J]. Journal of Physics D: Applied Physics, 2011, 44(13): 135201.

[7] Zhang L J, Zhang J X, Wu B, et al. Simulation on the Melt Flow in Laser Full Penetration Welding with a Model Including a Non-Rotational Symmetry Keyhole Based on Energy Balance[J]. RARE METAL MATERIALS AND ENGINEERING, 2011, 40: 120-124.

2010

[6] L J ZhangJ X ZhangH SerizawaH Murakawa*. Efficiency comparison between iterative substructure method and commercial software [J]. Transactions of JWRI, 2010, 39(2): 187-189.

2009

[5] Zhang L J*, Zhang J X, Gong S L. Mechanism study on the effects of side assisting gas velocity during CO2 laser welding process [J]. Journal of Applied Physics, 2009, 106(2): 024912.

2007

[4] L J ZhangJ X ZhangH Kalaoui*, et al. A comparative study of the effects of weld geometry on the residual deformation of automotive gear-case assembly due to high-energy welding [J]. Journal of Materials Processing Technology, 2007, 190(1-3):109-116.

[3] Linjie Zhang, Jianxun Zhang, et al. Parametric studies of welding distortion in a fillet welded structure based on FEA using Iterative Sub-structure Method [J]. Science and Technology of Welding and Joining, 2007, 12(8):703-707.

2006

[2] Zhang LJ, Zhang JX, Murakawa H*. An Analysis of the Role of Side Assisting Gas during CO2 Laser Welding [J]. Transactions of JWRI, 2006, 35:89-94.

[1] Linjie Zhang*, Jianxun Zhang, et al. Numerical and experimental study of the effects of side assisting gas during laser welding [J]. Modelling and Simulation in Materials Science and Engineering, 2006, 14(5): 875-890.