• 校内登录

个人信息 更多+
  • 教师姓名: 林梅
  • 电子邮箱:
  • 所在单位: 能源与动力工程学院
  • 办公地点: 兴庆校区--东三楼1楼甲165室
    创新港校区--1号巨构4123室
  • 性别: 女
  • 联系方式:
  • 职称: 研究员
  • 主要任职: 流体机械及工程系实验室主任
  • 博士生导师: 是
  • 硕士生导师: 是

小组新闻

当前位置: 中文主页 - 小组新闻

祝贺硕士生王晓宇撰写的科研论文被国际权威期刊“ASME Journal of Heat Transfer”录用

发布时间:2020-06-16
点击次数:
发布时间:
2020-06-16
文章标题:
祝贺硕士生王晓宇撰写的科研论文被国际权威期刊“ASME Journal of Heat Transfer”录用
内容:

 

       课题组硕士生王晓宇,齐迪,李彤等共同完成的论文题目如下,链接地址: https://doi.org/10.1115/1.4047508

Heat Transfer Characteristics of Non-Uniform Flow Around a Circular Cylinder in a T-Junction Duct

Xiaoyu Wang, Di Qi, Tong Li, Mei Lin,Hanbing Ke, Min Zeng, Qiuwang Wang

Abstract:Heat transfer characteristics of a circular cylinder in the branch of a T-junction duct are experimentally investigated in a low-speed wind tunnel with Reynolds number of Reb = 9163. Local and average heat transfer distributions around the circular cylinder are obtained for the cylinder positions ranging from 0.5 to 13 and the velocity ratios ranging from 0.117 to 0.614. It is found that the overall heat transfer characteristics in a T-junction duct at high velocity ratio are lower than those at low velocity ratio, and both are higher than those in the straight duct. The local Nusselt number in the T-junction duct is an asymmetrical distribution and weakens with increasing velocity ratios and/or positions of the cylinder. The angles of the front and rear stagnation points in the T-junction duct are the same as those in the straight duct at certain velocity ratio and/or position of the cylinder. However, the angles of the front and rear separation points in the T-junction duct do not match those in the straight duct. Both the heat transfer correlation coefficients and the amplitude ratios increase with increasing positions of the circular cylinder and/or velocity ratios.