| 论文简介 |
Natural gas combustion with pilot ignition has been considered to be one of the most promising ways to
utilize natural gas in existing diesel engine without serious engine modification and it has been widely
researched all over the world. In this study, three experiments of different loads (BMEP 0.240 MPa,
0.480 MPa and 0.767 MPa) were performed on a 2.8 L four-cylinder, natural gas manifold injection
dual-fuel engine to investigate the effects of natural gas injection timing on engine combustion performance and emissions. The pilot injection parameters (pilot injection timing and pressure) and natural
gas injection pressure remain constant at a speed of 1600 rpm in the experiment. The cylinder pressure,
HRR, CoVimep, flame development duration, CA50 and brake thermal efficiency were analyzed. The results
indicated that under low and part engine loads, the flame development duration and CA50 can be
reduced by properly retarding natural gas injection timing, while the CoVimep increased with retarded
natural gas injection timing. As a result, the brake thermal efficiency is increased and the combustion stability slightly deteriorates. Meanwhile, under low and part engine loads, PM emissions in the dual-fuel
engine is much lower than that in conventional diesel engines, furthermore, at high load, the PM emissions are near zero. CO and HC emissions are reduced with retarded natural gas injection timing under
low and part loads, however, NOx emissions are slightly increased. Under high load, the flame development duration and CA50 are obviously prolonged with retarded natural gas injection timing companied
with a deterioration of brake thermal efficiency. CO and HC emissions are not significantly varied with
retarded natural gas injection timing under high load, except that NOx emissions decreased slightly. |
(创新港)
