| 论文简介 |
Fundamental research on the mineral transformation of iron-rich coal is very necessary for extending its utilization at elevated temperature. In this work twelve runs with six types of additives (halloysite, alumina-rich ash, dolomite, SiO2, CaO and MgO) at different mixing proportions were sorted, to adjust the relative content of Si, Al, Ca or Mg element in coal ashes targeting to improve the slagging characteristic. Ash fusion tests and the preparation of coal ashes at elevated temperatures (1100, 1150 and 1250℃) were performed, respectively. The effects of additive type and blending ratio on the fusion characteristic and the mineral phase transformation were explored. Elemental composition, crystalline mineral phases and micro-morphologies of coal ashes were characterized via various technical approaches. The results showed that 3% alumina-rich ash or dolomite significantly improve the deformation temperature of iron-rich coal. While the addition of halloysite or SiO2 with a same proportion sharply decreases the softening and flow temperatures of coal ash, except for slightly increasing the deformation temperature. The composite additive consisting of alumina-rich ash, MgO and dolomite, could promote the formation of MgFe2O4, FeAl2O4, Mg(Fe,Al)2O4 or MgAl2O4 which inhibit the melting of coal ash. However, a low proportion of Si-rich additive into iron-rich coal is not suggested. |
(创新港)
