论文题目：Role of secondary hydrogen injection on flame stabilization of ammonia/air swirling flames

论文摘要：Ammonia is widely recognized as one of the most advanced hydrogen carriers and can be utilized as a fuel in gas turbines. Premixing hydrogen into the ammonia carbon free fuel system can substantially enhance stable limits, but it significantly promotes cross-reactions,  leading to increased NO production. Recent findings related to other fuels suggest that the alternative approach for mitigating combustion instabilities involves introducing minimal pure hydrogen at the chamber inlet in a non-premixed mode. This may introduce a novel approach to stabilize ammonia/air swirl fames by extending the stability through a minimal hydrogen via secondary injection, with minimal impact on increasing nitrogen oxide emissions. In the present study, the ame stabilization mechanism and nitrogen oxide emission behaviours of swirl ammonia/air flames by a secondary hydrogen injection were compared with the premixed ammonia/hydrogen/air flames. OH-/NO-PLIF and PIV techniques were applied to reveal the lean blow-off characteristics and the reacting flow features. The NOx emissions were measured by the FTIR gas analyzer. The large eddy simulation method with a developed dynamic thickened flame model was employed to further reveal the experimental findings. Experimental results show that the ame stabilization limits are largely depended on the way in which hydrogen is introduced. The secondary hydrogen injection exhibits the stronger enhancement ability for the lean/rich blow-off limits, primarily due to the local diffusion hydrogen flame at the flame root providing more active radicals and higher temperature gases. The NO emission shows an increase with the addition of premixed hydrogen, while in the secondary hydrogen injection, NO emission deteriorates due to higher temperatures, with the NO emission increasing by less than 10% compared with the ammonia flame. In the large eddy simulation analyses, the physical effects of the secondary hydrogen injection enhance the flame stability by increasing the resistance of the flame root to extinction. The heat release rate and the mass fractions of NH and H near the flame root are significantly increased by 2% secondary hydrogen injection. The enhancement of the ammonia decomposition process is stronger with secondary hydrogen injection than with fully premixed hydrogen  addition. For 2% secondary hydrogen injection case, the local hydrogen injection to form a non-premixed combustion mode can provide much higher capability to increase the local heat release rate compared to the fully premixed mode.