Spray Morphology Transformation of Propane, n-Hexane and iso-Octane under Flash-Boiling Conditions
发布时间：2025-04-30
点击次数：
- 发布时间：
- 2025-04-30
- 论文名称：
- Spray Morphology Transformation of Propane, n-Hexane and iso-Octane under Flash-Boiling Conditions
- 发表刊物：
- Fuel
- 摘要：
- 本文开展了不同过热度下多种燃油闪蒸喷雾雾化形态特征研究，探讨了喷雾形态转变条件与作用机理。
相关工作由清华大学、西安交大和北京航空航天大学合作发表。
Abstract
Spray collapse has been widely observed under both flash-boiling and non-flash-boiling conditions when multi-hole gasoline direct injection (GDI) injectors with compact nozzle configurations were used. The main objective of this study is to further understand the collapse mechanisms by using liquids with appreciably different properties (propane, n-hexane and iso-octane). The tests were carried out in a constant volume vessel with ambient pressures ranging from 0.6 bar to 11.0 bar and fuel temperatures from 30 °C to 110 °C. Flashing propane sprays presented a non-collapse feature under elevated-ambient-pressures but flash-boiling conditions. By close-up examination of flashing propane sprays over a wide range of liquid temperatures and ambient pressures, it was found that there should be an ambient pressure threshold between 1.0 and 3.0 bar between the collapsed and the non-collapse sprays for propane. The spray collapse occurred as the ambient pressure is below the threshold. The non-collapse feature for flashing propane sprays under the ambient pressures beyond the threshold was attributed to the prohibition of nucleation and bubble growth under elevated ambient pressures.
- 合写作者：
- Yanfei Li, Hengjie Guo, Zhifu Zhou, Zhou Zhang, Xiao Ma, Longfei Chen
- 是否译文：
- 否
- 发表时间：
- 2018-08-31