李国君教授多年来一直从事计算流体动力学，多相流，传热传质理论和固体氧化物燃料电池等方面的科学研究工作，主持或参加包括国家自然科学基金重点项目、面上项目在内的科研项目30余项，发表论文160余篇。

[1] Chai D, Zhang X, Chan S H, et al. Facile aqueous phase synthesis of Pd3Cu–B/C catalyst for enhanced glucose electrooxidation[J]. Journal of the Taiwan Institute of Chemical Engineers, 2019, 95: 139-146.

[2] Xu X, Lai F, Li G, et al. A Novel Vibration Suppression Device for Floating Offshore Wind Generator[J]. Journal of Energy Resources Technology, 2019, 141(6): 061201.

[3] Lai F, Zhu X, Xu X, et al. Erosion wear and performance simulation of centrifugal pump for solid-liquid flow[C]//ASME 2018 Power Conference collocated with the ASME 2018 12th International Conference on Energy Sustainability and the ASME 2018 Nuclear Forum. American Society of Mechanical Engineers Digital Collection, 2018.

[4] Fu L, Guo T, Li G. Investigation on damping performance of new type oscillator-liquid combined damper[J]. International Journal of Mechanical Sciences, 2018, 135: 53-62.

[5] Fu L, Feng Z, Li G. Investigation on design flow of a millimeter-scale radial turbine for micro gas turbine[J]. Microsystem Technologies, 2018, 24(5): 2333-2347.

[6] Fu L, Feng Z, Li G. Discussions on problem analysis and solutions of a micro turbine test[J]. Microsystem Technologies, 2018, 24(3): 1433-1442.

[7] Gong J, Hou J, Li G, et al. A lattice Boltzmann study of frost growth on a cold surface[J]. International Communications in Heat and Mass Transfer, 2018, 98: 116-124.

[8] Gong J, Hou J, Sun J, et al. A Numerical Investigation of Frost Growth on Cold Surfaces Based on the Lattice Boltzmann Method[J]. Energies, 2018, 11(8): 2077.

[9] Xu X, Guo T, Li G, et al. A combined system of tuned immersion mass and sloshing liquid for vibration suppression: Optimization and characterization[J]. Journal of Fluids and Structures, 2018, 76: 396-410.

[10] Zhu X, Lai F, Zhu L, et al. The Influence of Vaned Diffuser Outlet Diameters on Operating Performance of a Single-Stage Centrifugal Pump[C]//ASME 2018 Power Conference collocated with the ASME 2018 12th International Conference on Energy Sustainability and the ASME 2018 Nuclear Forum. American Society of Mechanical Engineers Digital Collection, 2018.

[11] Yang N, Zhang X, Li G, et al. Effects of Temperature Differences Among Cells on the Discharging Characteristics of Lithium‐Ion Battery Packs with Series/Parallel Configurations during Constant Power Discharge[J]. Energy Technology, 2018, 6(6): 1067-1079.

[12] Hua D, Li G, Lu H, et al. Investigation of carbon formation on Ni/YSZ anode of solid oxide fuel cell from CO disproportionation reaction[J]. International Communications in Heat and Mass Transfer, 2018, 91: 23-29.

[13] Lu H, Hua D, Iqabl T, et al. Molecular dynamics simulations of the coke formation progress on the nickel-based anode of solid oxide fuel cells[J]. International Communications in Heat and Mass Transfer, 2018, 91: 40-47.

[14] Lu H, Xie C, Hua X, et al. Numerical Study on Thermoelectric Performance of Cross-Flow Planar Solid Oxide Fuel Cell[C]//ASME 2018 12th International Conference on Energy Sustainability collocated with the ASME 2018 Power Conference and the ASME 2018 Nuclear Forum. American Society of Mechanical Engineers Digital Collection, 2018.

[15] 朱相源, 江伟, 李国君, 等. 导叶与隔舌相对位置对离心泵水力性能影响的数值研究[J]. 武汉大学学报: 工学版, 2018, 51(1): 72-79.

[16] Gong J , Sun J , Li G . An experimental study of the effect of air quality on frosting on cold flat surface[J]. International Communications in Heat and Mass Transfer, 2017, 82:139-144.

[17] Ye Y, Zhu X, Lai F, et al. Application of the semi-analytical cavitation model to flows in a centrifugal pump[J]. International Communications in Heat and Mass Transfer, 2017, 86: 92-100.

[18] Xu Z, Zhang X, Li G, et al. Comparative performance investigation of different gas flow configurations for a planar solid oxide electrolyzer cell[J]. International Journal of Hydrogen Energy, 2017, 42(16): 10785-10801.

[19] Fu L, Feng Z, Li G. Experimental investigation on overall performance of a millimeter-scale radial turbine for micro gas turbine[J]. Energy, 2017, 134: 1-9.

[20] Fu L, Liu P, Li G. Numerical Investigation on the Low Temperature Corrosion Characteristics of Flue Gas Heat Exchanger[J]. Journal of Failure Analysis and Prevention, 2017, 17(6): 1164-1173.

[21] Fu L, Liu P, Li G. Numerical investigation on ash fouling characteristics of flue gas heat exchanger[J]. Applied Thermal Engineering, 2017, 123: 891-900.

[22] Fu L, Zhu X, Jiang W, et al. Numerical investigation on influence of diffuser vane height of centrifugal pump[J]. International Communications in Heat and Mass Transfer, 2017, 82: 114-124.

[23] Cui J, Wang J, Fan W, et al. Porous YFe0. 5Co0. 5O3 thin sheets as cathode for intermediate-temperature solid oxide fuel cells[J]. International Journal of Hydrogen Energy, 2017, 42(31): 20164-20175.

[24] Fu L, Li G. Research on product value of wheel diameter and rotational speed—A new design parameter for micro radial turbines[J]. Archives of Civil and Mechanical Engineering, 2017, 17(2): 231-239.

[25]叶阳辉, 朱相源, 孙光普, 等. 离心泵内空泡演化与其对振动的影响[J]. 农业机械学报, 2017, 48(6): 88-93.

[26]李劲劲, 何坤, 晏鑫, 等. 透平叶片近前缘端壁处换热性能的研究[J]. 西安交通大学学报, 2017 (7): 44-50.

[27] Li M, Zhang X, Li G. A comparative assessment of battery and fuel cell electric vehicles using a well-to-wheel analysis[J]. Energy, 2016, 94: 693-704.

[28] Li M, Zhang X, Li G, et al. A feasibility study of microgrids for reducing energy use and GHG emissions in an industrial application[J]. Applied energy, 2016, 176: 138-148.

[29] Zhu X, Li G, Jiang W, et al. Experimental and numerical investigation on application of half vane diffusers for centrifugal pump[J]. International Communications in Heat and Mass Transfer, 2016, 79: 114-127.

[30] Fan P, Zhang X, Hua D, et al. Experimental study of the carbon deposition from CH4 onto the Ni/YSZ anode of SOFCs[J]. Fuel Cells, 2016, 16(2): 235-243.

[31] Yang T, Yang N, Zhang X, et al. Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack[J]. International Journal of Thermal Sciences, 2016, 108: 132-144.

[32] Ye Y, Li G. Modeling of hydrodynamic cavitating flows considering the bubble-bubble interaction[J]. International Journal of Multiphase Flow, 2016, 84: 155-164.

[33] Jiang W, Li G, Liu P, et al. Numerical investigation of influence of the clocking effect on the unsteady pressure fluctuations and radial forces in the centrifugal pump with vaned diffuser[J]. International Communications in Heat and Mass Transfer, 2016, 71: 164-171.

[34] Zhang X, Li M, Ge Y, et al. Techno-economic feasibility analysis of solar photovoltaic power generation for buildings[J]. Applied Thermal Engineering, 2016, 108: 1362-1371.

[35] Bai G, Li W, Chang H, et al. The effect of tidal current directions on the optimal design and hydrodynamic performance of a three-turbine system[J]. Renewable energy, 2016, 94: 48-54.

[36] Yang N, Zhang X, Shang B B, et al. Unbalanced discharging and aging due to temperature differences among the cells in a lithium-ion battery pack with parallel combination[J]. Journal of Power Sources, 2016, 306: 733-741.

[37] 朱相源, 江伟, 李国君, 等. 导叶式离心泵内部流动特性数值模拟[J]. 农业机械学报, 2016, 47(6): 34-41.

[38] 江伟, 朱相源, 李国君, 等. 导叶与隔舌相对位置对离心泵叶轮径向力的影响[J]. 农业机械学报, 2016, 47(2): 28-34.

[39] 郭涛, 管志成, 孙光普, 等. 调频振子-液体联合水平减振的流固耦合机理研究[J]. 西安交通大学学报, 2016, 50(1): 28-33.

[40] Bai G, Li G, Ye Y, et al. Numerical analysis of the hydrodynamic performance and wake field of a horizontal axis tidal current turbine using an actuator surface model[J]. Ocean Engineering, 2015, 94(11):1-9.

[41] Sun J, Gong J, Li G. A lattice Boltzmann model for solidification of water droplet on cold flat plate[J]. International Journal of Refrigeration, 2015, 59:53-64.

[42] Tao Guo, Yanghui Ye, Guojun Li. On the Key Parameters of an Interior Sloshing Absorber for Vibration Suppression[J]. International Journal of Structural Stability & Dynamics, 2015, 15(1):1450076.

[43] Yang N, Zhang X, Li G, et al. Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangements[J]. Applied Thermal Engineering, 2015, 80:55–65.

[44] Zhang X, Chan S H, Ho H K, et al. Towards a smart energy network: The roles of fuel/electrolysis cells and technological perspectives[J]. International Journal of Hydrogen Energy, 2015, 40(21):6866-6919.

[45] 郭振东, 宋立明, 李军,等. 基于子元模型的全局优化与设计空间知识挖掘方法[J]. 推进技术, 2015, 36(2):207-216.

[46] 江伟, 李国君, 张新盛. 基于叶片载荷分布的离心泵叶轮水力性能优化[J]. 哈尔滨工程大学学报, 2015(4):505-510.

[47] 杨乃兴, 张兄文, 李国君,等. 基于Li分布特性的锂电池放电容量研究[J]. 工程热物理学报, 2015(5):1042-1046.

[48] 朱相源, 江伟, 李国君,等. 导叶与隔舌相对位置对离心泵非定常压力脉动影响的数值模拟[J]. 排灌机械工程学报, 2015, 33(10):829-834.

[49] Fan P., Li G., Zeng Y., Zhang X., Numerical study on thermal stresses of a planar solid oxide fuel cell, International Journal of Thermal Sciences, 77 (2014) 1-10.

[50] Gong J, Gao T, Li G. Contrastive experimental study on heat transfer and friction characteristics in steam cooled and air cooled rectangular channels with rib turbulators[J]. Journal of Mechanical Science and Technology, 2014, 28(9):3845-3854.

[51] Gong J., Gao T., Li G., Heat transfer and friction characteristics in steam cooled rectangular channels with rib turbulators, Journal of Mechanical Science and Technology, 28 (2014) 357-364.

[52] HUI TIAN, GUOJUN LI, XIONGWEN ZHANG. NUMERICAL SIMULATION OF RAYLEIGH–TAYLOR INSTABILITY BASED ON AN IMPROVED PARTICLE LEVEL SET METHOD[J]. International Journal of Computational Methods, 2014, 11(4):1350094.

[53] L. L. WANG, G. J. LI, H. TIAN, et al. SIMULATIONS OF DROPLET FORMATION IN A T-JUNCTION MICRO-CHANNEL USING THE PHASE FIELD METHOD[J]. International Journal of Computational Methods, 2014, 11(4):1350096.

[54] Yang N, Zhang X, Li G. State of charge estimation for pulse discharge of a LiFePO 4, battery by a revised Ah counting[J]. Electrochimica Acta, 2014, 151:63-71.

[55] Yang N, Zhang X, Li G. State-of-charge estimation for lithium ion batteries via the simulation of lithium distribution in the electrode particles[J]. Journal of Power Sources, 2014, 272:68–78.

[56] Zeng Y K, Fan P, Zhang X, et al. Sensitivity Analysis for a Planar SOFC: Size Effects of the Porous Gas Diffusion Layer Underneath the Channel Rib[J]. Fuel Cells, 2014, 14(1):123-134.

[57] Zhang X, Kong X, Li G, et al. Thermodynamic assessment of active cooling/heating methods for lithium-ion batteries of electric vehicles in extreme conditions[J]. Energy, 2014, 64(1):1092-1101.

[58] Zhang X, Tan S C, Li G. Development of an ambient air temperature prediction model[J]. Energy & Buildings, 2014, 73(2):166–170.

[59] 江伟, 李国君, 张新盛,等. 离心泵蜗壳进口边对叶轮径向力影响的数值模拟[J]. 水利学报, 2014, 45(2):248-252.

[60] 吕治国, 李国君, 赵荣娟,等. 卡尔斯潘公司高超声速脉冲设备建设历程分析[J]. 实验流体力学, 2014, 28(5):1-6.

[61] 杨乃兴, 张兄文, 李国君. 锂离子电池放电循环的发热特性研究[J]. 工程热物理学报, 2014(9):1850-1854.

[62] Bai G., Li J., Fan P., Li G., Numerical investigations of the effects of different arrays on power extractions of horizontal axis tidal current turbines, Renewable Energy, 53 (2013) 180-186.

[63] Gong J., Gao T., Li G., Performance Analysis of 15 kW Closed Cycle Ocean Thermal Energy Conversion System With Different Working Fluids, Journal of Solar Energy Engineering, 135 (2013) 024501.

[64] Sun J., Gong J., Li G., Gao T., Lattice Boltzmann Simulation of Frost Formation Process, in:  ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th Interna

[65] TIAN H., LI G., ZHANG X., NUMERICAL SIMULATION OF RAYLEIGH–TAYLOR INSTABILITY BASED ON AN IMPROVED PARTICLE LEVEL SET METHOD, International Journal of Computational Methods, (2013).

[66] Xiuling S, Liang L, Guojun L. Transonic flow of moist air around the onera m6 wing with non-equilibrium and homogeneous condensation[J]. Research Journal of Applied Sciences Engineering & Technology, 2013, 6(10):1825-1833.

[67] Xiuling S, Liang L, Guojun L. Transonic moist air flows with release of latent heat by non-equilibrium condensation[J]. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering, 2013, 228(7):1083-1094.

[68] Zeng Y., Fan P., Zhang X., Fu C., Li J., Li G., Sensitivity Analysis for a Planar SOFC: Size Effects of the Porous Gas Diffusion Layer Underneath the Channel Rib, Fuel Cells, (2013).

[69] Zhang X, Tan S C, Li G, et al. Components sizing of hybrid energy systems via the optimization of power dispatch simulations[J]. Energy, 2013, 52(52):165–172.

[70] 龚建英, 孙金绢, 李国君. 格子-Boltzmann方法模拟霜结晶生长[J]. 低温工程, 2013(4):10-13.

[71] 江伟, 李国君, 张新盛, 压水室结构对离心泵径向力影响的数值分析, 排灌机械工程学报, 31 (2013) 93-97.

[72] 江伟, 李国君, 张新盛. 离心泵叶片出口边倾斜角对压力脉动的影响[J]. 排灌机械工程学报, 2013, 31(5):369-372.

[73] 吕治国, 李国君, 赵荣娟,等. 激波风洞高超声速摩阻直接测量技术研究[J]. 实验流体力学, 2013, 27(6):81-85.

[74] 孙秀玲, 李亮, 马晓永, 李国君, 普朗特 迈耶流中湿空气非平衡凝结影响的研究, 空气动力学学报, 31 (2013) 425-429.

[75] 孙秀玲, 马晓永, 李亮, 李国君, RAE2822 翼型湿空气非平衡凝结流动的研究, 空气动力学学报, 31 (2013) 592-597.

[76] 田辉, 李国君. 改进粒子水平集法及其应用[J]. 计算物理, 2013, 30(6):833-842.

[77] Bai G., Gao T., Li G., Numerical study on power extractions of staggered grid tidal turbine array, Journal of Xi'an Jiaotong University, 46 (2012).

[78] Fan P., Zhang X., Li G., Numerical Study on Electric Characteristics and Thermal Stresses of Solid Oxide Fuel Cells, in:  ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2012 6th Inter

[79] Gong J, Gao T, Li G. Performance Analysis of 15 kW Closed Cycle Ocean Thermal Energy Conversion System With Different Working Fluids[J]. Journal of Solar Energy Engineering, 2012, 135(2):024501.

[80] 白光辉, 樊鹏飞, 郭涛, 李国君, 水平轴潮汐透平场的数值研究, 西安交通大学学报, 46 (2012) 98-102.

[81] 白光辉, 高铁瑜, 李国君. 交叉潮汐透平阵列能量输出的数值研究[J]. 西安交通大学学报, 2012, 46(11):35-39.

[82] 樊鹏飞, 张兄文, 李国君, 刘倩, 板式固体氧化物燃料电池的热应力分析, 西安交通大学学报, 46 (2012) 75-81.

[83] 江伟, 郭涛, 李国君, 刘三华, 离心泵流场流固耦合数值模拟, 农业机械学报, 43 (2012) 53r56.

[84] 孙皓, 李军, 李国君,等. 非轴对称端壁造型技术在透平中的应用和发展[J]. 热力透平, 2012, 41(1):18-25.

[85] 田辉, 王琳琳, 叶阳辉, 李国君, 应用改进粒子水平集法对液滴碰撞的数值研究, 西安交通大学学报, 46 (2012) 125-130.

[86] 吕治国, 李国君, 罗义成,等. 激波管性能参数的计算及其结果分析[J]. 江汉大学学报(自然科学版), 2011, 39(2):22-26.

[87] 孙秀玲, 李亮, 吴联为, 李国君, 跨音速湿空气非平衡凝结流动的数值研究, 应用力学学报, 28 (2011) 493-498..

[88] 孙皓, 李军, 李国君, 丰镇平, 非轴对称端壁造型技术在透平机械中的应用和发展, 中国动力工程学会透平专业委员会 2011 年学术研讨会论文集, (2011).

[89] 田辉, 王琳琳, 叶阳辉, 李国君, 一种改进的高效粒子水平集法及其应用, 西安交通大学学报, 45 (2011) 34.

[90] 王琳琳, 李国君, 田辉, 叶阳辉, T 型微通道内气液两相流数值模拟, 西安交通大学学报, 45 (2011) 65-69.

[91] Li G., Feng Z.-B., Wang X., Self-regulating cooperative control of steering/antilock braking system of vehicles, Jisuanji Yingyong Yanjiu, 27 (2010) 4189-4192.

[92] SUN X.-l., LI L., LI G.-j., Numerical study of the effects of condensation of moist air on the aerodynamic characteristics of the ONERA M6 wing, Acta Aerodynamica Sinica, 2 (2010) 004.

[93] Wang Q., Zhang Z.-M., Zhang X., Li G.-J., New extrusion process of Mg alloy automobile wheels, Transactions of Nonferrous Metals Society of China, 20 (2010) s599-s603.

[94] Zhang X, Chan S H, Li G, et al. A review of integration strategies for solid oxide fuel cells[J]. Journal of Power Sources, 2010, 195(3):685-702.

[95] 郭涛, 李国君, 田辉, 孙秀玲, 基于遗传算法的离心泵叶轮参数化造型及优化设计, 排灌机械工程学报, 28 (2010) 384-388.

[96] 李军, 刘立军, 李国君, 丰镇平, 空化数对离心泵水力性能影响的数值研究, 工程热物理学报, 31 (2010) 773-776.

[97] 吕治国, 李国君, 李中华,等. 激波风洞测力试验不确定度分析[J]. 江汉大学学报(自然科学版), 2010, 38(1):33-36.

[98] 孙秀玲, 李亮, 李国君, 湿空气凝结对 ONERA M6 机翼气动特性影响的数值研究, 空气动力学学报, 28 (2010) 143-148.

[99] 孙秀玲, 李亮, 李国君, 翼型湿空气非平衡凝结流动的数值研究, 航空学报, 31 (2010) 1546.

[100] 田辉, 孙秀玲, 郭涛, 李国君, 基于遗传算法的离心泵叶片水力性能优化, 农业机械学报, 41 (2010) 64-67.

[101] 王琳琳, 田辉, 李国君. 基于Level Set方法对油水和气水两相界面的数值模拟[J]. 应用力学学报, 2010, 27(2):298-302.

[102] WU X.-m., LI G.-j., LI L., FENG Z.-p., Numerical Simulation of Self-excited Oscillation Patterns in Wet Steam Flow with Condensation, Journal of Power Engineering, 8 (2009) 010.

[103] Zhang X., Li J., Li G., Feng Z., Numerical study on the thermal characteristics in a tubular solid oxide fuel cell with indirect internal reformer, International Journal of Thermal Sciences, 48 (2009) 805-814.

[104] 李军, 刘立军, 李国君, 丰镇平, 基于汽相/液相界面跟踪方法的弯管内空化流动的数值预测, 工程热物理学报, 29 (2009) 2037-2039.

[105] 李亮, 李瑜, 吴晓明, 陈红梅, 李国君, 丰镇平, 江生科, 孔祥林, 孙奇, 钟刚云, 汽轮机中湿蒸汽两相凝结流动研究, 热力透平, (2009) 236-240.

[106] 田辉, 郭涛, 孙秀玲, 李国君, 离心泵内部动静干涉作用的数值模拟 [J], 农业机械学报, 40 (2009) 92-95.

[107] 吴晓明, 李国君, 李亮, 丰镇平, 湿蒸汽凝结流中自激振荡模式的数值模拟, 动力工程, (2009) 747-751.

[108] 郑金, 李国君, 贾海东, 汪传美, 董康田, 变工况下非轴对称端壁环形叶栅流场特性实验, 航空动力学报, 23 (2009) 2308-2313.

[109] LI L., LI Y., WU X.-m., CHEN H.-m., LI G.-j., FENG Z.-p., JIANG S.-k., KONG X.-l., SUN Q., ZHONG G.-y., Study of Wet Steam Two-Phase Flow with Condensation in Steam Turbine, Thermal Turbine, 4 (2008) 003.

[110] WANG C., LI G., ZHENG J., DONG K., Experimental Investigation of Non-Axisymmetric Endwall Profiling Technique in Cascades, Journal of Xi'an Jiaotong University, 9 (2008) 007.

[111] Zhang X., Chan S., Ho H.K., Li J., Li G., Feng Z., Nonlinear model predictive control based on the moving horizon state estimation for the solid oxide fuel cell, International Journal of Hydrogen Energy, 33 (2008) 2355-2366.

[112] 陈红梅, 李亮, 丰镇平, 李国君, 透平级中自发凝结及叶栅中非均质凝结流动的初步研究, 工程热物理学报, (2008) 65-68.

[113] 李国君, 任光辉, 马晓永, 李军, 叶栅非轴对称端壁成型技术的初步研究, 工程热物理学报, (2008) 97-100.

[114] 李军, 刘立军, 李国君,等. 基于汽相/液相界面跟踪方法的弯管内空化流动的数值预测[J]. 工程热物理学报, 2008, 29(12):2037-2039.

[115] 李亮, 丰镇平, 李国君, 透平级内动静干涉对凝结特性影响的数值研究, 工程热物理学报, (2008) 89-92.

[116] 吕强, 李军, 李国君, 丰镇平, 动叶围带顶部泄漏流动对透平级气动性能影响的数值研究, 工程热物理学报, (2008) 85-88.

[117] 汪传美, 李国君, 郑金, 董康田, 非轴对称端壁成型技术的实验研究, 西安交通大学学报, 42 (2008) 1086-1090.

[118] LI J., SUN H., LI G.-j., FENG Z.-p., Numerical investigations on flow characteristics of micro-centrifugal blood pump [J], Journal of Thermal Science and Technology, 3 (2007) 009.

[119] Li J., Yan X., Li G., Feng Z., Effects of pressure ratio and sealing clearance on leakage flow characteristics in the rotating honeycomb labyrinth seal, in:  ASME Turbo Expo 2007: Power for Land, Sea, and Air, American Society of Mechanical Engineers

[120] Wu X., Li L., Li G., Feng Z., Numerical Simulation of Wet Steam Condensing Flow Based on a Two-fluid model, in:  Challenges of Power Engineering and Environment, Springer, 2007, pp. 1331-1336.

[121] Yin J, Li G, Feng Z. Effects of shape factors on flow and heat transfer in corrugated-undulated channels with sinusoidal waves[J]. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power & Energy, 2007, 221(4):497-508.

[122] Zhang X, Li G, Li J, et al. Numerical study on electric characteristics of solid oxide fuel cells[J]. Energy Conversion & Management, 2007, 48(3):977-989.

[123] Zhang X., Li J., Li G., Feng Z., Cycle analysis of an integrated solid oxide fuel cell and recuperative gas turbine with an air reheating system, Journal of Power Sources, 164 (2007) 752-760.

[124] Zheng J., LI G.-j., Li J., ZHANG X.-w., Numerical research on a new non-axisymmetric endwall profiling method [J], Journal of Aerospace Power, 9 (2007) 016.

[125] 李军, 刘立军, 李国君, 丰镇平, 离心泵叶轮内空化流动的数值预测, 工程热物理学报, 28 (2007) 948-950.

[126] 李军, 孙皓, 李国君, 丰镇平, 小型离心血液泵内流动特性的数值研究, 热科学与技术, 6 (2007) 235-240.

[127] 李亮, 程代京, 丰镇平, 李国君, 汽轮机湿蒸汽级中凝结流动的三维数值分析, 工程热物理学报, 27 (2007) 571-573.

[128] 李亮, 孙秀玲, 陈丽智, 李国君, 湿空气凝结对 ONERA M6 机翼气动特性影响的数值研究, 大型飞机关键技术高层论坛暨中国航空学会 2007 年学术年会论文集, (2007).

[129] 刘绪立, 雷伟, 郑金, 李国君, 于海龙, 椎体模型内模拟注射 PMMA 的流动及分布规律, 第四军医大学学报, 2 (2007) 022.

[130] 吕强, 李军, 李国君,等. 动叶围带顶部泄漏流动对透平级气动性能影响的数值研究[J]. 工程热物理学报, 2007, 28(S1):85-88.

[131] 吴晓明, 李国君, 丰镇平, 李亮, SST k-ω-kp 两相湍流模型及其在湿蒸汽凝结流动数值模拟中的应用, 西安交通大学学报, 41 (2007) 526-529.

[132] 吴晓明, 李亮, 李国君, 丰镇平, 基于双流体模型的湿蒸气凝结流动三维数值模拟, 热能动力工程, 22 (2007) 367-370.

[133] 张兄文, 李军, 李国君, 丰镇平, 管式 SOFC 热电特性的三维数值研究, 热能动力工程, 21 (2007) 628-631.

[134] 郑金, 李国君, 李军, 张兄文, 一种新非轴对称端壁成型方法的数值研究, 航空动力学报, 22 (2007) 1487-1491.

[135] Li L., Feng Z., Li G., Study on Effects of Spontaneous Condensation on Performance of Low Pressure Stages in a Steam Turbine, in:  ASME Turbo Expo 2006: Power for Land, Sea, and Air, American Society of Mechanical Engineers, 2006, pp. 1545-1553.

[136] Yin J., Li G., Feng Z., Effects of intersection angles on flow and heat transfer in corrugated-undulated channels with sinusoidal waves, Journal of heat transfer, 128 (2006) 819-828.

[137] Zhang X, Li J, Li G, et al. Development of a control-oriented model for the solid oxide fuel cell[J]. Journal of Power Sources, 2006, 160(1):258–267.

[138] Zhang X, Li J, Xu H, et al. Numerical study of self-adaptive vibration suppression for flexible structure using interior inlay viscous fluid unit method[J]. Journal of Sound & Vibration, 2006, 297(3-5):627-634.

[139] Zhang X., Li J., Li G., Feng Z., Dynamic modeling of a hybrid system of the solid oxide fuel cell and recuperative gas turbine, Journal of Power Sources, 163 (2006) 523-531.

[140] Zhang X., Li J., Xu H., Li G., Numerical study of self-adaptive vibration suppression for flexible structure using interior inlay viscous fluid unit method, Journal of sound and vibration, 297 (2006) 627-634.

[141] Zhang X.-w., Li J., Li G.-j., A Three-dimensional Numerical Study of Thermoelectric Characteristics of Tubular Solid-oxide Fuel Cells, Journal of Engineering for Thermal Energy and Power, 21 (2006) 628.

[142] 李国君, 马晓永, 李军, 非轴对称端壁成型及其对叶栅损失影响的数值研究, 西安交通大学学报, 39 (2006) 1169-1172.

[143] 刘绪立, 雷伟, 郑金, 李国君, 吕荣, 李丹, 流体在椎体内流动及分布规律的实验研究, 中国脊柱脊髓杂志, 16 (2006) 626-629.

[144] 任光辉, 李国君, 李军,等. 非轴对称端壁对叶栅内二次流的影响[C]// 工程计算流体力学会议. 2006.

[145] 任光辉, 李国君, 孟全兵,等. 非轴对称端壁对叶栅内二次流影响的数值研究[C]// 2006中国工程热物理学会热机气动力学学术会议. 2006.

[146] 张兄文, 李国君, 李军, 离心泵叶轮内变流量流动特性的数值模拟, 农业机械学报, 36 (2006) 62-65.

[147] 张兄文, 李国君, 李军. 离心泵蜗壳内部非定常流动的数值模拟[J]. 农业机械学报, 2006, 37(6):63-68.

[148] 张兄文, 李军, 李国君,等. 管式SOFC热电特性的三维数值研究[J]. 热能动力工程, 2006, 21(6):628-631.

[149] LI G.-j., YIN J.-x., FENG Z.-p., Effects of Pitch-to-Height Ratio on Flow and Heat Transfer Characteristics in Cross-Corrugation Passages, Power Engineering, 4 (2005) 026.

[150] LI J., LI G., FENG Z., Numerical simulation of flow fields within straight-through labyrinth glands of steam turbine diaphragms [J], Power Engineering, 3 (2005) 003.

[151] LI J., LI G.-j., FENG Z.-p., Aerodynamic Optimization Design of Cascade Airfoil Using Hybrid Evolutionary Algorithms, Mechanical Science and Technology, 4 (2005) 009.

[152] LI L., FENG Z.-p., CHEN H.-m., LI G.-j., Study on Application of Condensation Theory to Design of Steam Turbine, Thermal Turbine, 1 (2005) 008.

[153] Li J., Li G., Feng Z., Liu L., Multiobjective Optimization Approach to Turbomachinery Blades Design, in:  ASME Turbo Expo 2005: Power for Land, Sea, and Air, American Society of Mechanical Engineers, 2005, pp. 1051-1058.

[154] Li L., Sun X., Feng Z., Li G., Transonic flow of moist air around a NACA 0012 airfoil with non-equilib-rium condensa-tion, Progr. Nat. Sci, 15 (2005) 838-842.

[155] Li Liang, Sun Xiuling, Feng Zhenping, et al. Transonic flow of moist air around and NACA 0012 airfoil with non-equilibrium condensation[J]. Progress in Natural Science:Materials International(自然科学进展:国际材料(英文)), 2005, 15(9):838-842(5).

[156] Yin J., Li G., Feng Z., Effects of Corrugation Angle on Flow and Heat Transfer in Cross Corrugation Channels With Sinusoidal Waves, in:  ASME Turbo Expo 2005: Power for Land, Sea, and Air, American Society of Mechanical Engineers, 2005, pp. 311-320.

[157] Yin J., Li G., Feng Z.E., Numerical Study on the Characteristics of Convection Heat Transfer in Crossed-Corrugated Primary Surface Exchanger, Xi'an Jiaotong Daxue Xuebao(Journal of Xi'an Jiaotong University)(China), 39 (2005) 36-40.

[158] Yin J.-X., Li G.-J., Feng Z.-P., Numerical investigation of effects of plate spacing on flow and heat transfer in sinusoidal channels, Re Kexue yu Jishu(Journal of Thermal Science and Technology)(China), 4 (2005) 123-129.

[159] Yin J.-X., Li G.-J., Feng Z.-P., Numerical study of periodically fully developed convection heat transfer in two kinds of wavy channels, Reneng Dongli Gongcheng(J. Eng. Therm. Energy Power), 20 (2005) 250-254.

[160] ZHANG X.-w., LI G.-j., LI J., FENG Z.-p., The high temperature fuel cell/gas turbine hybrid power generation technology [J], Gas Turbine Technology, 1 (2005) 004.

[161] 李国君, 马晓永, 李军. 非轴对称端壁成型及其对叶栅损失影响的数值研究[J]. 西安交通大学学报, 2005, 39(11):1169-1172.

[162] 李国君, 阴继翔, 丰镇平, CC 型通道波纹相对节距对流动与换热特性的影响, 动力工程, 25 (2005) 567-572.

[163] 李军, 李国君, 丰镇平, 汽轮机光轴迷宫式隔板汽封内部流场的数值模拟, 动力工程, 25 (2005) 321-324.

[164] 李军, 李国君, 丰镇平, 应用复合进化算法的叶栅气动优化设计方法的研究, 机械科学与技术, 24 (2005) 412-414.

[165] 李亮, 丰镇平, 陈红梅, 李国君, 凝结理论在汽轮机设计中应用的探讨, 热力透平, 34 (2005) 36-40.

[166] 阴继翔, 李国君, 丰镇平, 两种波纹通道内周期性充分发展对流换热的数值研究, 热能动力工程, 20 (2005) 250-254.

[167] 阴继翔, 李国君, 丰镇平. 波纹通道板间距对通道内流动与换热影响的数值研究[J]. 热科学与技术, 2005, 4(2):123-129.

[168] 阴继翔, 李国君, 丰镇平. 非对称交错波纹通道内流动与换热的数值研究[C]// 中国工程热物理学会年会. 2005.

[169] 阴继翔, 李国君, 丰镇平. 交错波纹板原表面换热器通道内对流换热的数值研究[J]. 西安交通大学学报, 2005, 39(1):36-40.

[170] 张兄文, 李国君, 李军, 丰镇平, 高温燃料电池/燃气轮机混合循环发电技术, 燃气轮机技术, 18 (2005) 23-29.

[171] 张兄文, 李国君, 李军, 李亮, 带控制片方柱绕流的非定常数值模拟, 应用力学学报, 22 (2005) 275-278.

[172] 张兄文, 李国君, 李军. 离心泵叶轮内变流量流动特性的数值模拟[J]. 农业机械学报, 2005, 36(10):62-65.

[173] Yin J., Li G., Feng Z., Numerical Study on the Characteristics of Flow and Heat Transfer in Wavy Channels with Different Phase Shifts, Xi'an Jiaotong Daxue Xuebao(Journal of Xi'an Jiaotong University)(China), 38 (2004) 693-697.

[174] 陈红梅, 李亮, 丰镇平, 李国君, 一维喷管中湿蒸汽非均质凝结流动的研究, 工程热物理学报, 25 (2004) 395-398.

[175] 马晓永, 李国君, 李亮, 李军, 两方程紊流模型在三维高速紊流流场数值模拟中的应用, 计算流体力学研究进展——第十二届全国计算流体力学会议论文集, (2004).

[176] 阴继翔, 李国君, 丰镇平. 不同相位差正弦型波纹通道内流动与换热特性的数值研究[J]. 西安交通大学学报, 2004, 38(7):693-697.

[177] 阴继翔, 李国君, 李卫华. 对流扩散方程不同格式的数值稳定性分析[J]. 太原理工大学学报, 2004, 35(2):121-124.

[178] 李亮, 丰镇平, 李国君, 湿蒸汽中超临界加热引起的非定常凝结流动一维数值分析, 自然科学进展, 13 (2003) 210-213.

[179] 李亮, 丰镇平, 李国君. 出气边形状对叶栅中凝结流动影响机理的数值研究[J]. 工程热物理学报, 2003, 24(5):767-769.

[180] FENG Z.-p., LI L., LI G.-j., Status and Progress in Numerical Researches on Wet Steam Two-Phase Condensing Flows in Steam Turbines [J], Shanghai Turbine, 2 (2002) 000.

[181] Li L., Li G., Feng Z., Numerical simulation of spontaneously condensing flows in a plane turbine cascade, TASK Quarterly: scientific bulletin of Academic Computer Centre in Gdansk, 6 (2002) 209-216.

[182] 李亮, 丰镇平, 李国君, 平面叶栅中的湿蒸汽两相凝结流动数值模拟, 工程热物理学报, 23 (2002) 309-311.

[183] 李亮, 李国君, 湿蒸汽两相流动的数值方法及其在喷管中的应用, 西安交通大学学报, 35 (2001) 1131-1134.

[184] Li G, Feng Z, Zhang M, et al. A k-ε Turbulence Model Considering Compressibility in Three-Dimensional Transonic Turbulent Flow Calculation[J]. Journal of Thermal Science, 2000, 9(2):97-102.

[185] Li G., Feng Z., Xu K., Shen Z., The Compressible kappa-omega Turbulence Model and its Application, JOURNAL OF ENGINEERING THERMOPHYSICS, 20 (1999) 309-312.

[186] 李国君, 丰镇平, 徐克鹏, 沈祖达, 可压缩 κ-ω 方程紊流模型及其应用, 工程热物理学报, 20 (1999) 309-312.

[187] Chang J., Feng Z., Li G., Shen Z., Numerical Simulation and Analysis of Secondary Flows in a Turbine Cascade Under Large and Small Negative Incidences, JOURNAL OF ENGINEERING THERMOPHYSICS, 19 (1998) 565-570.

[188] Chang J., Feng Z., Li G., Shen Z., Numerical prediction of secondary flow loss in a turbine cascade by using TVD scheme to solve N-S equations, Journal of Aerospace Power, 13 (1998) 139-143.

[189] Li G., Feng Z., Shen Z., Numerical study on nozzle underexpanded impinging jet flows and its complex wave fields, JOURNAL-XIAN JIAOTONG UNIVERSITY, 32 (1998) 68-71.

[190] 常建忠, 丰镇平, 李国君, 沈祖达. 不同负冲角工况下透平叶栅二次流的数值模拟及分析[J]. 工程热物理学报, 1998, 19(5):565-570.

[191] 李国君, 常建忠, 丰镇平, 沈祖达, TVD 格式在超音速喷管三维粘性流动求解中的应用 Ξ, 应用力学学报, 15 (1998).

[192] 李国君, 丰镇平, 喷管不足膨胀冲击喷流的数值研究, 西安交通大学学报, 32 (1998) 68-71.

[193] 常建忠, 李国君, 涡轮平面叶栅损失的数值预测, 汽轮机技术, 37 (1995) 39-43.

[194] 常建忠, 李国君, 平面跨音速叶栅的优化设计, 西安交通大学学报, 28 (1994) 55-61.

[195] Jiang W, Li G, Liu P F, et al. Numerical investigation of influence of the clocking effect on the unsteady pressure fluctuations and radial forces in the centrifugal pump with vaned diffuser ☆[J]. International Communications in Heat & Mass Transfe

[196] 常建忠, 丰镇平, 李国君, 沈祖达, 应用 TVD 格式求解 NS 方程预测透平叶栅二次流损失.

[197] 孙秀玲, 李亮, 李国君, 流体力学与飞行力学.