论文专利/ Papers and Patents - 刘 斌
| Paper Name | Author | Publication/Completion Time | Magazine Name |
|---|---|---|---|
| High-rate and excellent-cycle performance Li4Ti5O12 electrodes with 3D porous copper foils as current collectors fabricated using a femtosecond laser processing strategy | High-rate and excellent-cycle performance Li4Ti5O12 electrodes with 3D porous copper foils as current collectors fabricated using a femtosecond laser processing strategy | 2023-02-25 | Journal of Energy Storage |
| Enhanced Na+ diffusion in Na3V2(PO4)2F2O cathodes via Zr4+ doping for high-rate and long-cycling sodium batteries | Xiaofei Sun a,b,c,⁎, Anastase Ndahimana, Zikang Wang, Xuesong Mei⁎, Bin Liu, Guoxin Gao, Lilong Xion⁎, Haitao Wang , Wenjun Wang | 2023-02-16 | Journal of Alloys and Compounds |
| 基于混沌粒子群优化的转子失衡参数辨识研究 | 运侠伦，庞哲凯，章云，姜歌东，刘斌，梅雪松 | 2022-10-28 | 振动、测试与诊断 |
| In situ three-dimensional laser machining system integrating in situ measurement, reconstruction, parameterization, and texture mapping | Xiao Li, Xiaoying Ren, Xuesong Mei, Bin Liu*, Wenjun Wang & Xiaodong Wang | 2022-10-02 | The International Journal of Advanced Manufacturing Technology |
| Avoiding Feed Fluctuation for Five-axis Interpolation using 3D clothoid and B-spline | Zheng Sun, Liyong Niu, Bin Liu*, Kedian Wang, Bo Li & Xuesong Mei | 2022-06-16 | The International Journal of Advanced Manufacturing Technology |
| Digital Twin-Based Automated Guided Vehicle Scheduling: A Solution for Its Charging Problems | Wenjie Han ,Jun Xu,Zheng Sun ,*,Bin Liu,Kemu Zhang ,Zhaohui Zhang andXuesong Mei | 2022-03-25 | Applied Sciences |
| Fabrication of 4h–Sic Microvias Using a Femtosecond Laser Assisted by a Protective Layer | Bin Liu Panpan Fan , Hongwei Song, Kai Liao, Wenjun Wang | 2022-01-05 | Optical Materials |
| Research on hole depth in femtosecond laser deep micropore processing technology based on filament effect | Bin Liu , Yingjie Yan, Jie Zhao, Wenjun Wang *, Kai Liao | 2021-11-15 | Optik |
| Picosecond laser trimming of ceramic cores with porous multi-scale particle microstructure | Xiaodong Wang, Xuesong Mei, Xintian Wang Bin Liu*, Zheng Sun , Renhan Lian | 2021-10-30 | Ceramics International |
| Enhanced feedrate scheduling algorithm for CNC system with acceleration look？ahead and sin2 acceleration profile | Zheng Sun, Xintian Wang, Bin Liu*, Jiexin Lu, Xuesong Mei & Yi Zhou | 2021-10-28 | The International Journal of Advanced Manufacturing Technology |
| High quality full ablation cutting and stealth dicing of silica glass using picosecond laser Bessel beam with burst mode | Kai Liao , Wenjun Wang* , Xuesong Mei , Bin Liu | 2021-09-17 | Ceramics International |
| Removal of recast layer in the laser drilled film cooling holes by a two-step inner streaming electrochemical technique | Wenqiang Duan, Xuesong Mei, Zhengjie Fan, Bin Liu*,Rujia Wang and Martin Byung-Guk Jun | 2021-07-07 | Journal of Micromechanics and Microengineering |
| Fabrication of millimeter-scale deep microchannels in fused silica by femtosecond laser filamentation effect | Kai Liao, Wenjun Wang*, Xuesong Mei, Bin Liu | 2021-05-14 | Optics & Laser Technology |
| Global smoothing for five-axis linear paths based on an adaptive NURBS interpolation algorithm | Xiaodong Wang, Bin Liu*, Xuesong Mei, Dongxiang Hou, Qin Li & Zheng Sun | 2021-04-08 | The International Journal of Advanced Manufacturing Technology |
| Improved battery performance of Fe-doped LiVPO4F with high capacity and stable cycling | Xiaofei Sun , Qiongdan Hu , Tietuo Tao , Anastase Ndahimana , Lin Qi , Quansheng Li , Bin Liu, Xuesong Mei | 2020-12-28 | Materials Letters |
| A Novel Method to Reduce the Laser Drilling Time for Hole Cluster considering the Influence of Residual Vibration of the Sample Stage | Xiaodong Wang,Bin Liu* ,Xuesong Mei,Jun Yang,Xialun Yun,Xiao Li,and Jian Li | 2020-06-29 | Shock and Vibration |
| Development of an In-Situ Laser Machining System Using a Three-Dimensional Galvanometer Scanner | Xiao Li, Bin Liu*, Xuesong Mei, Wenjun Wang , Xiaodong Wang , Xun Li | 2019-11-21 | Engineering |
| Rapid fabrication of microlens arrays on PMMA substrate using a microlens array by rear-side picosecond laser swelling | Li Jiang, Wang Wenjun *， Mei Xuesong ， Pan Aifei ， Liu Bin , Cui Jianlei | 2019-10-02 | Optics and Lasers in Engineering |
| Artificial Compound Eyes Prepared by a Combination of Air-Assisted Deformation, Modified Laser Swelling, and Controlled Crystal Growth | Jiang Li, Wenjun Wang*, Xuesong Mei, Aifei Pan, Xuefeng Sun, Bin Liu, and Jianlei Cui | 2019-01-09 | ACS Nano |
| Formation of porous structure with subspotsize under the irradiation of picosecond laser pulses | in Liu , Wenjun Wang*, Gedong Jiang , Xuesong Mei , Kedian Wang , Jiuhong Wang Authors Info & Claims | 2013-01-01 | Journal of Nanomaterials |
| Patent Name | Application Number | xjtu.gr.patent.type | Application Date |
|---|---|---|---|
| 一种基于飞秒激光加工聚酰亚胺表面制备标印图案的方法 | CN202111425717.7 | Invention | 2021.11.26 |
| 一种激光加工腔体的在线监测加工方法以及系统 | CN202111015332.3 | Invention | 2021.08.31 |
| 一种基于层间差异的激光加工后壁组合防护方法及系统 | CN202111017143.X | Invention | 2021.08.31 |
| 一种基于空间光调制器的鲨鱼皮表面结构快速制备方法 | CN202110969333.5 | Invention | 2021.08.23 |
| 一种大幅激光加工用光机电协同控制方法 | CN202110774943.X | Invention | 2021.07.08 |
| 一种飞秒激光加工喷嘴切向孔的装置和方法 | CN202110644477.3 | Invention | 2021.06.09 |
| 一种基于飞秒激光光丝效应的薄石英玻璃切割方法 | CN202110520515.4 | Invention | 2021.05.13 |
| 一种基于贝塞尔光束的石英玻璃隐形切割方法 | CN202110520508.4 | Invention | 2021.05.13 |
| 基于飞秒激光和温控时效综合调控制备超疏水表面的方法 | CN202110276386.9 | Invention | 2021.03.15 |
| 一种光波导微透镜阵列的制备及光学性能检测方法 | CN202011398017.9 | Invention | 2020.12.04 |
| 利用飞秒激光光丝效应制备石英玻璃毫米级深微孔的方法 | CN202011201443.9 | Invention | 2020.11.02 |
| 一种连接二维随机封闭图形生成最短路径的规划方法 | CN202010819357.8 | Invention | 2020.08.14 |
| 陶瓷基复合材料的飞秒-纳秒超脉冲激光平整加工系统 | CN202010566345.9 | Invention | 2020.06.19 |
| 一种适用于多面转子的不平衡参数辨识方法 | CN202010566363.7 | Invention | 2020.06.19 |
| 一种多级复眼透镜的制造方法 | CN202010058570.1 | Invention | 2020.01.09 |
| 一种基于扫描振镜的激光原位加工装备及方法 | CN201910138298.5 | Invention | 2020.01.01 |
| 一种PCD车齿刀的紫外纳秒激光切割方法 | CN201911329147.4 | Invention | 2019.12.20 |
| 一种飞秒脉冲激光诱导多壁碳纳米管产生共价互连的工艺 | N201910528568.3 | Invention | 2019.06.18 |
| 一种大幅面激光加工方法 | CN201910385033.5 | Invention | 2019.05.09 |
| 一种超快激光加工装备光机电协同控制系统 | CN201910275965.4 | Invention | 2019.04.08 |
| Republication | Author | Republication date | Publisher |
|---|---|---|---|
| 脉冲激光加工技术 | 梅雪松 赵万芹 王文君 崔建磊 段文强 凡正杰 刘斌 | 2023-02-24 | 科学出版社 |
