Blank2

  1. Ruiqin Wang, Xin Yan*. Delayed-Detached Eddy Simulations of Film Cooling Effect on Trailing Edge Cutback with Land Extensions, ASME Journal of Engineering for Gas Turbines and Power, GTP-21-1126.
  2. Xinbo Dai, Xin Yan*, Kun He, Jun Li, Zhenping Feng. Numerical Investigations of Leakage Performance Degradations in Labyrinth and Flexible Seals Due to Wear, ASME Journal of Engineering for Gas Turbines and Power, 2021, 143(5): 051003. (DOI: https://doi.org/10.1115/1.4049008) 
  3. Xin Yan*, Mingliang Ye, Kun He. 2020, Investigations into Heat Transfer and Aerodynamic Performance of a Worn Squealer Tipped Turbine Stage, ASME Journal of Turbomachinery,142(9), p.091012. WOS:000568798800012, ISSN: 0889-504X, IDS 号: NN4ZO
  4. Jinjin Li, Xin Yan*, Kun He, Effect of Non-Axisymmetric Endwall Profiling on Heat Transfer and Film Cooling Effectiveness of a Transonic Rotor Blade, ASME Paper 2019-90154. (通讯作者, EI: 20194807746175)ISBN-13: 9780791858646;  DOI: 10.1115/GT2019-90154; ASME Journal of Turbomachinery, 2020, 142(5): 051006. DOI: https://doi.org/10.1115/1.4046448 (WOS:000612377700001, IDS 号: PY9RM)
  5. Jinjin Li, Xin Yan*, Kun He, Richard J. Goldstein. Implementation of Rectangular Vortex Generator Pairs to Improve Film Cooling Effectiveness on Transonic Rotor Blade Endwall, ASME Journal of Engineering for Gas Turbines and Power, (doi: https://doi.org/10.1115/1.4050917)
  6. Mingliang Ye, Kun He, Xin Yan, Influence of Wear Damages on Aerodynamic and Heat Transfer Performance in Squealer Tip Gap, Applied Thermal Engineering, 2019, 159, p.113976. (通讯作者)WOS:000475999100122 ISSN: 1359-4311, DOI: 10.1016/j.applthermaleng.2019.113976
  7. Xin Yan, Yan Huang, Kun He. Effect of Ejection Angle and Blowing Ratio on Heat Transfer and Film Cooling Effect on a Winglet Tip, International Journal of Heat and Mass Transfer, 125(2018): 357-374. ISSN: 0017-9310, WOS:000440118600030
  8. Yan Gao, Xin Yan*, Jun Li, Kun He Investigations into Film Cooling and Unsteady Flow Characteristics in a Blade Trailing-Edge Cutback Region, Journal of Mechanical Science and Technology, 2018, 32(10): 5015-5029. (通讯作者)WOS:000448196900046, ISSN: 1738-494X
  9. Xin Yan, Xinbo Dai, Kang Zhang, Jun Li, Kun He. Effect of Teeth Bending and Mushrooming Damages on Leakage Performance of a Labyrinth Seal, Journal of Mechanical Science and Technology, 2018, 32(10): 4697-4709. WOS:000448196900015 ,ISSN: 1738-494X
  10. Xin Yan, Yan Huang, Kun He. Investigations into heat transfer and film cooling effect on a squealer-winglet blade tip[J]. International Journal of Heat and Mass Transfer, 2017, 115, 955-978. (WOS: 000414108400084, IDS:FL3FN, DOI: 10.1016/j.ijheatmasstransfer.2017.08.090) , ISSN: 0017-9310
  11. Xin Yan, Yan Huang, Kun He, Jun Li, Zhenping Feng. Numerical investigations into the effect of squealer–winglet blade tip modifications on aerodynamic and heat transfer performance [J]. International Journal of Heat and Mass Transfer, 2016, 103, 242-253. IDS: DY0HL, WOS:000384777800020, DOI: 10.1016/j.ijheatmasstransfer.2016.07.058 (ISSN: 0017-9310)
  12. Xin Yan, Kun He, Jun Li, Zhenping Feng. Numerical Investigations on Rotordynamic Characteristic of Hole-Pattern Seals With Two Different Hole-Diameters [J]. ASME Journal of Turbomachinery, 2015, 137(7):071011.  WOS:000355701200011, IDS:CJ7SY, DOI: 10.1115/1.4029239. ISSN: 0889-504X
  13. Xin Yan, Kun He, Jun Li, Zhenping Feng. A Generalized Prediction Method for Rotordynamic Coefficients of Annular Gas Seals [J]. ASME Journal of Engineering for Gas Turbines and Power, 2015,137(9):092506. WOS:000360548600017, IDS: CQ4BH, DOI: 10.1115/1.4029883. ISSN: 0742-4795
  14. Xin Yan, Lijie Lei, Jun Li, Zhenping Feng. Effect of bending and mushrooming damages on heat transfer characteristic in labyrinth seals [J], ASME Journal of Engineering for Gas Turbines and Power, 2014, 136(4): 041901. WOS:000333041200012, IDS: AD2CR, DOI: 10.1115/1.4025899. ISSN: 0742-4795
  15. Xin Yan, Jun Li, Zhenping Feng. Effects of inlet preswirl and cell diameter and depth on honeycomb seal characteristics [J]. ASME Journal of Engineering for Gas Turbines and Power, 2010, 132(12):122506. (WOS:000285437700013,IDS: 696JM, DOI: 10.1115/1.4001296) ISSN: 0742-4795
  16. Xin Yan, Jun Li, Zhenping Feng. Investigations on the rotordynamic characteristics of a hole-pattern seal using transient CFD and periodic circular orbit model [J]. ASME Journal of Vibration and Acoustics, 2011, 133(4):041007. (WOS:000289432000007 , IDS: 748ZN, DOI: 10.1115/1.4003403. ISSN: 1048-9002
  17. Xin Yan, Jun Li, Liming Song, Zhenping Feng. Investigations on the discharge and total temperature increase characteristics of the labyrinth seals with honeycomb and smooth lands [J]. ASME Journal of Turbomachinery, 2009,131(4):041009. (WOS:000267983300008, IDS:470NW) DOI: 10.1115/1.3068320, ISSN: 0889-504X
  18. Xin Yan, Jun Li, Zhenping Feng. Effects of sealing clearance and stepped geometries on discharge and heat transfer characteristics of stepped labyrinth seals [J]. Proc. IMechE Part A: Journal of Power and Energy, 2011,225(7):521-538. (WOS:000293999400012 , IDS: 808ST, ISSN: 0957-6509, DOI: 10.1177/0957650911399329
  19. Kun He, Jun Li, Xin Yan, Zhenping Feng. Investigations of the Conjugate Heat Transfer and Windage Effect in Stepped Labyrinth Seals [J]. International Journal of Heat and Mass Transfer, 2012, 55, 4536-4547. (通讯作者, WOS:000306207300005 , IDS: 971MF, DOI: 10.1016/j.ijheatmasstransfer.2012.03.045, ISSN: 0017-9310
  20. Xin Yan, Kun He, Jun Li, Zhenping Feng. Rotordynamic performance prediction for surface-roughened seal using transient computational fluid dynamics and elliptical orbit model[J]. Proc. IMechE  Part A: Journal of Power and Energy, 2012, 226(8):975-988. (WOS:000312155200003 , IDS: 051VF, DOI: 10.1177/0957650912460358, ISSN: 0957-6509
  21. Xin Yan, Kun He, Jun Li, Zhenping Feng. Numerical Techniques for Computing Nonlinear Dynamic Characteristic of Rotor-Seal System, Journal of Mechanical Science and Technology, 2014, 28(5):1727-1740. (WOS:000336403500015 , IDS: AH8QP , DOI: 10.1007/s12206-014-0318-9, ISSN: 1738-494X
  22. Xin Yan, Jun Li, Kun He, Zhenping Feng, Yizhi Fan, Xianyou Shang. Investigations on Water Condensation in the Main Steam Pipe of a PWR Nuclear Power Station: Part I-Experimental Tests, Proc. IMechE Part A: Journal of Power and Energy, 228(4):380-390, 2014. (WOS:000335656300002,IDS:AG8GH) DOI: 10.1177/0957650914522235, ISSN: 0957-6509
  23. Kun He, Jun Li, Xin Yan, Zhenping Feng, Yizhi Fan, Xianyou Shang. Investigations on Water Condensation in the Main Steam Pipe of a PWR Nuclear Power Station: Part II- Theoretical Studies, Proc. IMechE Part A: Journal of Power and Energy, 228(4):391-401, 2014. (通讯作者: WOS:000335656300003, IDS: AG8GH), DOI:10.1177/0957650914522220, ISSN: 0957-6509
  24. Kun He, Jingjing Li, Xin Yan. Numerical Investigations into Heat Transfer and Film Cooling Effect on a Transonic Blade Endwall, Applied Thermal Engineering, 129: 934-952, 2018. DOI: 10.1016/j.applthermaleng.2017.10.109, ISSN: 1359-4311
  25. Jun Li, Shengru Kong, Xin Yan, Shinnosuke OBI, Zhengping Feng. Numerical investigations on leakage performance of the rotating labyrinth honeycomb seal [J]. ASME Journal of Engineering for Gas Turbines and Power, 2010,132:062501. (WOS:000276181300017 , SCI:576WS) DOI: 10.1115/1.4000091, ISSN: 0742-4795
  26. Zhigang Li, Jun Li, Xin Yan, Zhenping Feng. Effects of pressure ratio and rotational speed on leakage flow and cavity pressure in the staggered labyrinth seal [J]. ASME Journal of Engineering for Gas Turbines and Power, 2011,133(11):114503. (WOS:000290764500017 ,IDS:766ET) DOI: 10.1115/1.4003788, ISSN: 0742-4795
  27. Zhigang Li, Jun Li, Xin Yan, Zhenping Feng. Numerical investigations on the leakage flow characteristics of pocket damper labyrinth seals, Proc. IMechE Vol. 225 Part A: Journal of Power and Energy, 2012,226(7).932-948.( WOS:000312154800010, IDS:051VB) DOI: 10.1177/0957650912451410, ISSN: 0957-6509
  28. Zhigang Li, Jun Li, Xin Yan. Multiple frequencies elliptical whirling orbit model and transient RANS solution approach to rotordynamic coefficients of annual gas seals prediction, ASME Journal of Vibration and Acoustics, 135(3): 031005, 2013. (WOS:000326028700005,IDS:239MH), DOI: 10.1115/1.4023143, ISSN: 1048-9002.
  29. Wenhao Huo, Jun Li, Xin Yan. Effects of coolant flow rates on cooling performance of the intermediate pressure stages for an ultra-supercritical steam turbine, Applied Thermal Engineering 62: 723-731, 2014. WOS:000330910700047 , IDS: AA2FO , DOI: 10.1016/j.applthermaleng.2013.09.012, ISSN: 1359-4311
  30. Bo Qiu, Jun Li, Xin Yan. Investigation into the flow behavior of multi-stage brush seals, Proc. IMechE Part A: Journal of Power and Energy, 228(4):416-428, 2014. WOS:000335656300005 , IDS: AG8GH, DOI: 10.1177/0957650914522456, ISSN: 0957-6509
  31. Zhang YQ, Li J, Li ZG, Yan X. Effect of Bristle Pack Position on the Rotordynamic Characteristics of Brush-labyrinth Seals at Various Operating Conditions[J]. Chinese Journal of Aeronautics. 2020, 33(4): 1192-1205. (SCI: 000552305400006; EI: 20201608418119)
  32. Zhang YQ, Li J, Li ZG, Yan X. Numerical Comparison of Leakage Flow and Rotordynamic Characteristics for Two Types of Labyrinth Seals with Baffles [J]. ASME Journal of Engineering for Gas Turbines and Power. 2020, 142(9): 091008-1-17. https://doi.org/10.1115/1.4048053. (GTP-20-1158, SCI源刊,已发表)
  33. Zhang YQ, Li J, Ma DQ, He Y, Ji JJ, Sun B, Li ZG, Yan X. Experimental and Numerical Investigations on the Leakage Flow Characteristics of Helical-labyrinth-brush Seals [J/OL]. ASME Journal of Engineering for Gas Turbines and Power, 2020. https://doi.org/10.1115/1.4048842. (GTP-20-1077, SCI源刊,已在线发表)
  34. Ma DQ, Li J, Zhang YQ , Li ZG, Yan X, Song LM. Application of Blade Tip Shroud Brush Seal to Improve the Aerodynamic Performance of Turbine Stage [J]. Proc IMechE Part A: Journal of Power and Energy, 2019, 234(6): 777-794. (SCI: 000492135000001; EI: 20194607673968)
  35. Ma DQ, Zhang YQ , Li ZG, Li J, Yan X. Numerical Investigations On The Leakage Flow Characteristics Of Brush Seal Based On The 3d Staggered Tube Bundle Model, ASME Journal of Engineering for Gas Turbines and Power, 2021, https://doi.org/10.1115/1.4050157 (GTP-20-1761, SCI源刊,已在线发表)

Blank3

[1]    于金杏,叶明亮,晏鑫. 发动机工况下透平级凹槽叶顶冷却传热性能研究. 西安交通大学学报, 已录用。(通讯作者)
[2]    黄悦峰,张子寒,何坤,晏鑫. 单介质阻挡放电等离子体激励对平板气膜冷却性能的影响. 西安交通大学学报,2020, 54(11): 26-36.( 通讯作者,EI: 20205009616412) ISSN 0253-987X
[3]    黄悦峰,张子寒,何坤,晏鑫. 介质阻挡放电涡发生器等离子体激励条件下壁面气膜冷却性能研究. 西安交通大学学报, 2021, 55(3): 37-54. (通讯作者,EI: 20211310141510)
[4]    王瑞琴,晏鑫,何坤. 带肋板尾缘开缝叶片内的流动传热性能研究. 西安交通大学学报,2020, 54(1):150-161+183. (通讯作者, EI:20201108286157)
[5]    高炎,晏鑫,李军. 尾缘开缝透平叶片内流动传热特性研究[J]. 西安交通大学学报,2018, 52(10):31-40+48. (通讯作者, EI:20190206361674)
[6]    叶明亮, 晏鑫, 何坤. 隔板位置对透平级凹槽叶顶传热和冷却性能的影响[J]. 西安交通大学学报,2018, 52(5):116-124.(通讯作者, EI:20183905860960)
[7]    叶明亮, 黄琰, 晏鑫, 何坤. 隔板位置对凹槽叶顶传热和冷却性能的影响[J]. 西安交通大学学报,2018, 52(3):55-62.(通讯作者,EI: 20183705799346)
[8]    王瑞琴,高炎,晏鑫,何坤. 燃气透平尾缘开缝区冷却性能的非定常研究[J]. 西安交通大学学报, 2017, 51(12):98-103. (通讯作者, EI: 20181505001148)
[9]    李劲劲, 何坤, 晏鑫, 李国君. 透平叶片近前缘端壁处换热性能的研究[J]. 西安交通大学学报, 2017.51(7): 44-50+104. (EI: 20174104252788)
[10]    王茜,何坤,晏鑫.带肋尾缘开缝模型内非定常冷却性能研究.西安交通大学学报, 2020, 54(9): 128-135.
[11]    张子寒,何坤,晏鑫.带造型凹坑孔的平板气膜冷却特性研究.西安交通大学学报, 2020, 54(7): 84-93.
[12]    黄琰, 晏鑫, 何坤, 李军,丰镇平. 压力面侧小翼结构对凹槽叶顶冷却传热性能影响[J]. 西安交通大学学报, 2017.51(7):51-56. (通讯作者,EI: 20174104252789)DOI: 10.7652/xjtuxb201707008
[13]    陈秀秀,晏鑫,李军. 蜂窝叶顶密封对透平级气动性能的影响研究[J]. 西安交通大学学报, 2016.50(4).14-20. (通讯作者,EI: 20162002374701)
[14]    高炎,晏鑫,李军. 燃气透平叶片尾缘开缝结构冷却性能的数值研究[J]. 西安交通大学学报, 2016.50(3).29-37. (通讯作者,EI: 20161602262418)ISSN: 0253-987X
[15]    黄琰, 晏鑫, 何坤, 李军. 气膜孔分布对凹槽叶顶传热和冷却性能的影响[J]. 西安交通大学学报, 2016.50(5).101 -107. (通讯作者,EI: 20162202430593)
[16]    晏鑫, 李军, 丰镇平. 孔型阻尼密封非定常气流激振特性的研究[J]. 工程热物理学报,2014, 35 (4):651-654. EI:20141817659509 ISSN: 0253-231X
[17]    晏鑫, 李军, 丰镇平. 迷宫密封传热特性的数值研究[J]. 西安交通大学学报, 2012.46(11).1-5+29. (EI: 20125115818589)
[18]    晏鑫, 李军, 丰镇平. 蜂窝密封内耦合传热特性的研究[J]. 工程热物理学报, 2012,33(10):1683-1686.(EI:20124615671143)
[19]    晏鑫, 李军, 丰镇平. 蜂窝密封内流动传热及转子动力特性的研究进展[J]. 力学进展, 2011, 41(2):201-216.
[20]    晏鑫,李军,丰镇平. 孔型气体密封转子动力特性的研究[J].动力工程,2009,29(1):31-35.
[21]    晏鑫,李军,丰镇平. 预旋对蜂窝密封和迷宫密封内流动传热特性影响[J]. 航空动力学报,2009, 24(4):772-776. (EI: 20091912073406).
[22]    晏鑫,蒋玉娥,李军,丰镇平.迷宫密封转子动力学特性的数值研究[J]. 热能动力工程. 2009, 24(5):566-570.
[23]    晏鑫,李军,丰镇平. Bulk Flow方法分析孔型密封转子动力特性的有效性[J]. 西安交通大学学报,2009,43(1):24-28. (EI: 090811917405).
[24]    李军,晏鑫,丰镇平等. 透平机械阻尼密封技术及其转子动力特性研究进展[J].热力透平,2009,38(1):5-9+14.
[25]    晏鑫,李军,丰镇平.预旋对迷宫密封内流动传热特性影响的研究[J].热能动力工程,2008,23(1):7-10. (EI:080911125424).
[26]    晏鑫,李军,丰镇平.高速旋转光滑面迷宫密封内流动和传热特性的研究[J].动力工程,2008,28(2):190-194. (EI: 082011257147).
[27]    晏鑫,李军,宋立明,丰镇平.蜂窝面迷宫密封内流动和总温升特性的研究[J].西安交通大学学报,2008,42(7):823-827+869. (EI: 083211445484).
[28]    张元桥,李军,马登骞,何院,计京津,孙博,李志刚,晏鑫. 螺旋篦齿-刷式密封泄漏特性实验和数值研究[J/OL]. 西安交通大学学报,2020. http://kns.cnki.net/kcms/detail/61.1069.T.20200720.1100.002.html. (EI源刊,网络首发) 
[29]    张元桥,刘璐园,马登骞,李军,李志刚,晏鑫. 迷宫刷式密封泄漏特性的实验和数值研究[J]. 工程热物理学报,2020 (EI源刊,已录用) 
[30]    张元桥,李志刚,李军,晏鑫. 刷式-迷宫密封泄漏流动和转子动力特性数值研究[J]. 西安交通大学学报,2019,53(3):28-35. (EI:20192507062877)
[31]    张元桥,王妍,晏鑫,李军. 刷式密封泄漏流动及传热特性的研究第二部分:传热特性[J]. 工程热物理学报,2018,39(5):970-976. (EI:20184105932606) 
[32]    张元桥,王妍,晏鑫,李军. 刷式密封泄漏流动及传热特性的研究第一部分:泄漏特性[J]. 工程热物理学报,2017,38(3):482-489. (EI:20172203719550) 
[33]    马登骞,张元桥,李军,李志刚,晏鑫. 动叶叶顶迷宫刷式密封的透平级气动性能研究[J]. 西安交通大学学报,2019,53(11):10-19. (EI:20195207901108).
[34]    马登骞,张元桥,李军,晏鑫. 考虑刷丝变形的后夹板结构对刷式密封泄漏和传热特性影响的研究[J]. 西安交通大学学报,2019,53(9):15-25. (EI: 20194607667452).
[35]    马登骞,张元桥,李志刚,李军,晏鑫. 采用三维叉排管束模型的刷式密封泄漏特性研究[J]. 西安交通大学学报,2020,54(9):72-80. (EI源刊,已发表).
[36]    李军,孙奇,晏鑫,孔祥林,江生科,王建录,丰镇平.前加载和后加载叶片气动性能的数值研究[J].动力工程,2007,27(6):835-839. (EI: 080211013264).
[37]    李军,晏鑫,宋立明,邓清华,丰镇平,江生科,孔祥林,孙奇,王建录,王为民.透平机械密封技术研究进展[J].热力透平,2008,37(3):141-148.
[38]    李军,晏鑫,陈中凯,丰镇平.高速旋转的汽轮机隔板密封内流体流动的模拟[J].动力工程,2006,3:329~332. (EI: 06279980916).
[39]    李军, 晏鑫, 丰镇平, 江生科,孔祥林,孙奇,王建录. 基于多孔介质模型的刷式密封泄漏流动特性研究[J]. 西安交通大学学报,2007,41(7):768-771+779. (EI: 073410776868).
[40]    李军, 晏鑫, 丰镇平. 刷式密封泄漏流动特性影响因素的研究[J]. 热能动力工程, 2007, 22(3): 250-254. (EI: 072610674699).

Blank4

[1] 于金杏,叶明亮,晏鑫. 带小翼凹槽叶顶冷却传热性能数值研究. 中国工程热物理年会热机气动热力学分会.北京,2019:192318.

[2] 李智梅, 高炎, 晏鑫, 何坤. 尾缘开缝叶栅内传热特性的数值研究.中国工程热物理年会热机气动热力学分会.西安,2018:182071.

[3] 晏鑫, 何坤, 李军, 刘兆方, 丰镇平. 燃气透平动叶叶顶传热特性的数值研究[C]. 中国工程热物理年会热机气动热力学分会.内蒙古,2013:132018.

[4] 叶明亮,晏鑫,何坤. 带三角形隔板凹槽叶顶流动传热特性研究[C]. 中国工程热物理年会热机气动热力学分会.西安,2018:182099.

[5] 代欣波,张康,晏鑫,李军,丰镇平. 迷宫密封内磨损传热特性研究[C]. 中国工程热物理年会热机气动热力学分会.无锡,2016:162101.

[6] 晏鑫,李军,丰镇平,钟刚云,吴其林. 大功率汽轮机调节级全三维气动性能的数值研究[C]. 中国工程热物理第十二届学术年会热机气动热力学分会.重庆,2006:062034.

[7] 晏鑫,李军,丰镇平.预旋对蜂窝密封内流动传热特性影响的研究[C].中国工程热物理第十三届学术年会热机气动热力学分会.绍兴,2007:072039.

[8] 张元桥,晏鑫,李志刚,李军. 耐高压刷式密封泄漏流动、传热特性研究[C]. 2017年中国工程热物理学会热机气动热力学和流体机械学术会议,20172007,镇江,江苏,2017 .

[9] 张元桥,李军,李志刚,晏鑫,冀大伟,肖高绘. 刷式-迷宫密封泄漏和静态动力特性研究[C]. 2018年中国工程热物理学会热机气动热力学和流体机械学术会议,182057,西安,陕西,2018.

Blank5

[1] Yuefeng Huang, Zihan Zhang, Kun He, Xin Yan*. Enhanced Film Cooling Effect Downstream a Cylindrical Hole Using SDBD and DBD-VGs Plasma Actuations, ASME Paper GT2021-59413

[2] Sadam Hussain, Xin Yan*. Effect of Vortex Generators and Ramp on Endwall Film Cooling Near Blade Leading Edge, ASME Paper GT2021-59530

[3] Xin Yan. Very Large Eddy Simulation of Film Cooling Effectiveness on Trailing Edge Cutback, ASME Paper GT2020-15780. (EI: 20210509838065)

[2] Ruiqin Wang, Xin Yan*. Background-Grid Based Mapping Approach to Film Cooling Meshing-Part I: Strategies and Test Cases, ASME Paper GT2020-15768. (EI: 20210509841991)

[3] Ruiqin Wang, Xin Yan*. Background-Grid Based Mapping Approach to Film Cooling Meshing-Part II: Applications in Vane with Landed Trailing-Edge Cutback, ASME Paper GT2020-15093. (EI: 20210509842050)

[4] Ruiqin Wang, Xin Yan*. Background-Grid Based Mapping Approach to Film Cooling Meshing-Part III: Applications in a Full-Cooled Turbine Vane, ASME Paper GT2020-15092. (EI: 20210509842049)

[5] Mingliang Ye, Xin Yan*. Investigations of Heat Transfer and Film Cooling Effect on a Worn Squealer Tip, ASME Paper GT2020-14835. (EI: 20210509842040)

[6] Sadam Hussain, Xin Yan*. Implementation of Hole-Pair in Ramp to Improve Film Cooling Effectiveness on Plain Surface, ASME Paper GT2020-14838. (EI: 20210509842042)

[7] Xin Yan*, Yabo Wang, Kang Zhang, Xinbo Dai, Kun He. Investigations Into Aerodynamic Performance of Turbine Stages with Flexible Shroud Seals, ASME Paper GT2020-14329, 2020. (EI: 20210509838665)

[8] Xin Yan, Xinbo Dai. Effects of Labyrinth fin wear on Aerodynamic Performance of Turbine Stages-Part I: Bending Damages, ASME Paper GT2019-90152, 2019. (EI: 20194907782526 )

[9] Xinbo Dai, Xin Yan. Effects of Labyrinth fin wear on Aerodynamic Performance of Turbine Stages-Part II: Mushrooming Damages, ASME Paper GT2019-90153, 2019. (EI: 20194907782527)

[11] Xin Yan, Xinbo Dai, Kang Zhang, Jun Li, Kun He. Influence of hole-pattern stator on leakage performance of labyrinth seals, ASME Paper GT2018-75349, 2018. (EI:20184005897523)

[12] Jun Li, Yuanqiao Zhang, Xin Yan and Zhigang Li. Investigations on the Leakage Flow Characteristics of the Brush Seal with Annular Pressure Reduction Groove, 23rd International Conference of the International Society of Air Breathing Engines(ISABE), ISABE-2017-21331

[13] Kang Zhang, Xinbo Dai, Xin Yan*, Jun Li. Effect of Stator Rub Grooves on Leakage Performance of a Stepped Labyrinth Seal [C], 2017, Proceedings of Shanghai 2017 Global Power and Propulsion Forum,  GPPS-2017-130. (通讯作者)

[14] Xin Yan, Xiuxiu Chen, Kun He. Influence of shroud Seal Dimensions on Aerodynamic Performance of Steam Turbine Stages: Part I-Honeycomb Seal [C], ASME Paper GT2016-56917, 2016. (EI:20164202925418)

[15] Xin Yan, Xiuxiu Chen, Kun He. Influence of shroud Seal Dimensions on Aerodynamic Performance of Steam Turbine Stages: Part II- Hole-pattern Seal [C], ASME Paper GT2016-56921, 2016. (EI:20164202925419)

[16] Xin Yan, Yizhi Fan, Xianyou Shang, Kun He, Jun Li, Zhenping Feng. Theoretical investigations on water condensation in main steam pipe [C], ASME Paper GT2012-69567, 2012. (EI源刊:20133316600296)

[17] Xin Yan,  Lijie Lei, Jun Li, Zhenping Feng. Effect of bending and mushrooming damages on heat transfer characteristic in labyrinth seals, ASME Paper TBTS2013-2012.

[18] Zhigang Li, Jun Li, Xin Yan, Zhenping Feng, Hiroharu Ohyama, Ming Zhang. Investigations on the Flow Pattern and Aerodynamic Performance of Last Stage and Exhaust Hood for Large Power Steam Turbines, Proceedings of the ASME Turbo Expo 2012-Power for Land, Sea, and Air, Copenhagen, Denmark, GT2012-69291.

[19] Wenhao Huo, Jun Li, Xin Yan, Zhenping Feng. Numerical Investigations on the Steam Cooling Performance of the First Two Middle Pressure Turbine Stages for Ultra-Supercritical Steam Turbines, Proceedings of the ASME Turbo Expo 2012-Power for Land, Sea, and Air, Copenhagen, Denmark, GT2012-69302.

[20] Jun Li, Xin Yan, Liming Song, Jinshan Wang, Zhenping Feng. Effects of squealer rim thickness on the leakage flow and heat transfer characteristics of the gas turbine blade tip[C], AJCPP2012-009, 2012.

[21] Jia Liu, Jun Li, Xin Yan, Zhenping Feng. Effect of Rotor Blade Tip Cavity Flow on Aerodynamic Performance of Turbine Stages [C]. AJCPP2012-049, 2012.

[22] Jun Li, Xin Yan, Liming Song, Shengru Kong, Zhenping Feng. Numerical Investigations on the Leakage Flow Characteristics of Different Honeycomb Seal Configurations[C], International Gas Turbine Congress, IGTC2011-0114, Osaka, Japan, 2011.

[23] Jun Li, Xin Yan, Liming Song, Shaojun Li, Zhenping Feng. Effects of Rotor Tip Leakage on the Unsteady Flow Fields of Stator Blade in a One and Half Turbine Stage [C], International Gas Turbine Congress, IGTC2011-0117, Osaka, Japan, 2011.

[24] Jun Li, Zhigang Li, Xin Yan, Liming Song, Zhenping Feng. Effect of cell diameter and depth on the leakage flow characteristics of honeycomb seals[C], ICFD Conference, Japan, 2010.

[25] Jun Li, Yong Jiang, Xin Yan, Liming Song, Zhenping Feng. Numerical investigations on the aerodynamic performance of throttle governing stage for large power steam turbines[C]. ICFD Conference, Japan, 2010.

[26] Xin Yan, Jun Li, Zhenping Feng. Numerical investigations on the leakage flow and heat transfer characteristics of a stepped labyrinth seal[C]. The 7th International Symposium on Heat Transfer, Beijing, 2008.

[27] Xin Yan, Jun Li, Yonghui Xie, Zhenping Feng, Gangyun Zhong, Qilin Wu, Jianlu Wang. Computational fluid dynamics analysis approach to the aerodynamic performance of a nozzle controlling stage for a 600MW steam turbine [C & M]. Proceedings of the International Conference on Power Engineering 2007, Zhejiang University Press & Springer Press:1394-1400. (ISTP: 000255177100263).

[28] Jun Li, Xin Yan, Guojun Li, Zhenping Feng. Effect of pressure ratio and sealing clearance flow characteristics in the rotating honeycomb labyrinth seal[C]. ASME Paper GT2007-27740, 2007. (EI:073910824299).

[29] Jun Li, Xin Yan, Zhenping Feng. Numerical investigations on the flow characteristics in the labyrinth seals with the smooth and honeycomb lands [C]. AJCPP2006-22114, 2006.

[30] Li Jun, Yan Xin, Feng Zhenping. Effects of Pressure Ratio and Fin Pitch on Leakage Flow Characteristics in High Rotating Labyrinth Seals[C]. ASME Paper GT2006-91145, 2006. (EI:064610237402).

[31] Jun Li, Xin Yan, Qiang Lv, Yonghui Xie, Zhenping Feng. The effect of the shrouded rotor blade tip leakage flow on the aerodynamic performance of a one and half turbine stage [C & M]. Proceedings of the International Conference on Power Engineering 2007, Zhejiang University Press & Springer Press:275-280. (ISTP:000255177100050).

[32] Huo W, Li J, Yan X, et al. Numerical Investigations on the Steam Cooling Performance of the First Two Middle Pressure Turbine Stages for Ultra-Supercritical Steam Turbines, 2012. ASME Paper GT2012-69302.

[33] Xin Yan, Kun He, Jun Li. Effect of Rub Mushrooming Damage on the Leakage Flow Characteristics of Labyrinth Seal[C], Eleventh International Conference on Flow Dynamics, Oct. 8-10, 2014, Sendai, Japan.

[34] Zhang YQ, Li J, Yan X, Li ZG. Experimental and numerical investigations on leakage flow characteristics of two kinds of brush seals[C]. ASME Paper GT2018-76235, 2018. (EI:20184005897536)

[35] MA DQ, Zhang YQ, Li ZG, Li J, Yan X. Numerical Investigations on the Leakage Flow Characteristics of Brush Seal Based on the 3d Staggered Tube Bundle Model[C]. ASME Paper GT2020-14590, 2020. (EI会议文章)

[36] Zhang YQ, Li J, Li ZG, Song LM, Yan X. Effect of upstream deflector plate on the leakage flow and heat transfer characteristics of brush seal with annular groove in backing plate[C]. 24th International Society for Air Breathing Engines Conference, ISABE-2019-24096, Canberra, Australia, 2019.

[37] Zhang YQ, Ma DQ, Li J, He Y, Ji JJ, Sun B, Li ZG, Yan X. Effect of the fence height on the leakage flow characteristics of brush seals[C]. Global Power & Propulsion Society: Beijing Conference 2019, GPPS-BJ-2019-0021, Beijing, China, 2019.

[38] Li J, Ma DQ, Zhang YQ, He Y, Ji JJ, Sun B Li ZG, Yan X. Experimental and numerical investigations on the leakage flow characteristics of zero and clearance brush seals[C]. 12th International Gas Turbine Congress, IGTC-2019-0027, Tokyo, Japanese, 2019.