Paper

No entries were found.
Paper Name Author Publication/Completion Time Magazine Name
Design and coherent strengthening of ultra-high strength refractory high entropy alloys based on laser additive manufacturing Jianglong Cai, Hang Zhang, Lin Wang, Xiaoyu Sun, Xuebo Xu, Xin Guo, Dichen Li 2023-09-15 Materials Science and Engineering: A
An efficient micro-holes suppression process design method for high strength BCC high entropy alloys via powder bed fusion Yizhen Zhao, Hang Zhang, Jianglong Cai, Xiaoyu Sun, Lin Wang, Xuebo Xu, Xin Guo , Zhiqiang Tong, Dichen Li 2023-06-18 Journal of Manufacturing Processes
Development of high strength high plasticity refractory high entropy alloy based on Mo element optimization and advanced forming process Hang Zhang, Jianglong Cai, Jiale Geng, et al. 2023-04-08 International Journal of Refractory Metals and Hard Materials
Study on annealing treatment of NbMoTaTiNi high-entropy alloy with ultra-high strength disordered-ordered transition structure for additive manufacturing Hang Zhang; Jianglong Cai; Jiale Geng; et al. 2023-01-08 Journal of Alloys and Compunds
An efficient prediction model of effective thermal conductivity for metal powder bed in additive manufacturing Yizhen Zhao, Hang Zhang*, Jianglong Cai, Shaokun Ji, Dichen Li 2023-01-06 Chinese Journal of Mechanical Engineering
An effective method for large scale temperature simulation in SLM based on the finite difference Hang Zhanga, Jiale Genga, Shuo Zhua, et al. 2022-07-18 Numerical Heat Transfer, Part A: Applications
激光增材制造BCC基难熔高熵合金组织与性能研究 赵懿臻, 张航, 蔡江龙, 孙啸宇, 耿佳乐, 王林, 许学博, 李涤尘 2022-03-07 中国激光
High Performance NbMoTa–Al2O3 Multilayer Composite Structure Manufacturing by Laser Directed Energy Deposition H Zhang，Z Chen，Y He，X Guo，D Li 2021-03-30 Materials
High-strength NbMoTaX refractory high-entropy alloy with low stacking fault energy eutectic phase via laser additive manufacturing Hang Zhang†, Yizhen Zhao†, Jianglong Cai, Shaokun Ji, Jiale Geng, Xiaoyu Sun, Dichen Li 2021-01-08 Materials & Design
The effect of configurational entropy on mechanical properties of single BCC structural refractory high-entropy alloys systems Qingyu Li, Hang Zhang, Dichen Li⁎, Zihao Chen, Zhenjia Qi 2020-08-29 International Journal of Refractory Metals & Hard Materials
Comparative study of the microstructures and mechanical properties of laser metal deposited and vacuum arc melted refractory NbMoTa medium-entropy alloy Qingyu li, Hang Zhang*, Dichen Li, et al. 2020-01-11 International Journal of Refractory Metals and Hard Materials
2-D Selector Simulation Studies on Grain Selection for Single Crystal Superalloy of CM247LC Hang Zhang, Xintao Zhu, Fu Wang, et al. 2019-11-01 Materials
激光增材制造 WNbMoTa 高性能高熵合金 李青宇，张 航，李涤尘，等 2019-08-01 机械工程学报
Manufacturing and Analysis of High-Performance Refractory High-Entropy Alloy via Selective Laser Melting (SLM) Hang Zhang, Yizhen Zhao, Sheng Huang, Shuo Zhu, Fu Wang, Dichen Li 2019-03-01 Materials
WxNbMoTa Refractory High-Entropy Alloys Fabricated by Laser Cladding Deposition Qingyu Li , Hang Zhang*, Dichen Li, Zihao Chen, Sheng Huang 2019-02-11 Materials
A 3D discrete element-finite difference coupling model for predicting the effective thermal conductivity of metal powder beds Hang Zhang, Yizhen Zhao, Fu Wang, Dichen Li 2019-01-25 International Journal of Heat and Mass Transfer
激光熔覆沉积成形NbMoTaTi难熔高熵合金的组织与强度研究 李青宇，李涤尘，张航，等 2018-10-01 航空制造技术
The thermal-mechanical behavior of a WTaMoNb high-entropy alloy during selective laser melting (SLM): experiment and simulation Hang Zhang, Wang Xu, Yunjing Xu, Zhongliang Lu, Dichen Li 2018-01-24 The International Journal of Advanced Manufacturing Technology
Simulation and Experimental Studies on Grain Selection and Structure Design of the Spiral Selector for Casting Single Crystal Ni-Based Superalloy H. Zhang, Q. Xu 2017-10-27 Materials
Large-scale simulation of dendrite growth in directional solidification castings H. Zhang, Q. Xu 2017-06-22 Physica Status Solidi B
20 Entries Per Page

Showing 1 to 20 of 31 entries.

Patent

No entries were found.
Patent Name Application Number xjtu.gr.patent.type Application Date
高密度高超音速武器战斗部的多材料自锐结构设计与制造方法 ZL202018011775.5 Invention 2020.11.19
高密度高超音速多维动能打击智能战斗部的多材料自锐结构及制备方法 ZL202018011778.9 Invention 2020.11.19
一种仿乙醇分子结构辅助浇水家用花盆 ZL201922077692.0 Utility model 2020.09.18
一种SLM成形过程温度场数值模拟方法 ZL2019113605838 Invention 2019.12.25
针对SLM成形过程熔池激光同步跟随测温装置及测温方法 ZL2019113605895 Invention 2019.12.05
基于高温纤维支撑的激光增材制造装置及方法 CN2019100085996 Invention 2019.01.04
一种金属和陶瓷物化双强连接一体化构件及其制备方法 ZL201910002504X Invention 2019.01.02
基于激光定点间隔扫描的激光增材制造用金属粉末制备方法 ZL201711297768.X Invention 2017.12.08
采用多束激光辅助控温3D打印定向晶零件的装置及方法 ZL201610365623.8 Invention 2016.05.27
一种激光金属直接成形高熵合金涡轮发动机热端部件的方法 ZL201410632332.1 Invention 2014.11.11
一种基于选区激光熔化的高熵合金涡轮发动机热端部件的制造方法 ZL201410583314.9 Invention 2014.10.27
一种基于模拟的单晶叶片型壳局部加厚控制杂晶缺陷的方法 ZL201410582972.6 Invention 2014.10.07
20 Entries Per Page

Showing 1 to 12 of 12 entries.

Republication

No entries were found.
Republication Author Republication date Publisher
《中望CAD及三维建模实用教程》 张航，等 2024-10-08 西安交通大学
《金属材料宏微观力学行为》 张航，等 2023-12-01 科学出版社
《工程制图及计算机绘图技术UG版》 张航，等 2021-08-01 西安交通大学