2018年

[1]. Qing Zhang, Luyao Tan, Guanghua Xu. Evaluating transient performance of servo mechanisms by analysing stator current of PMSM. Mechanical Systems and Signal Processing. Vol. 101, 2018, pp535-548. (SCI：FK6KL, EI：20173904202446)

[2]. 贾林山，张庆（通讯作者）. 多分量调幅-调频信号的瞬时频率直接计算与畸变消除方法，西安交通大学学报，vol.52, No.6, 2018, pp. 122-127. (EI: 20183805839817)

[3]. Xiang Wan, Peter W. Tse, Xuhui Zhang, Guanghua Xu, Qing Zhang, et al. Numerical study on static component generation from the primary Lamb waves propagating in a plate with nonlinearity. Smart Materials and Structures, Vol. 27, No. 4, 2018, pp : 1-19. (SCI ：FY6FD)

[4]. Xiang Wan, Peter W. Tse, Jingming Chen, Guanghua Xu, Qing Zhang. Second harmonic reflection and transmission from primary S0 mode Lamb wave interacting with a localized microscale damage in a plate: A numerical perspective. Ultrasonics. Vol. 82, 2018, pp : 57-71. (SCI ：FM9UV)

2017年

[1]. 张庆，张海兵，谭璐瑶，徐光华. 面向制造业的云检测平台设计与实践，计算机集成制造系统，vol.23, No.8, 2017, pp. 1809-1816. (EI: 20174304293695)

[2]. Shijie Chu, Qing Zhang(通讯作者), Bin Xu, Fei Liu, Lin Liang. Visualization method for spectrum analysis of vibration acceleration signals. 2017 IEEE International Conference on Prognostics and Health Management, ICPHM 2017. June 19-21, 2017, Dallas, USA. pp. 239-245. (EI：20173604113015)

[3]. Xun Zhang, Qing Zhang(通讯作者), Luyao Tan, Guanghua Xu. Running state detection and performance evaluation method for feed mechanism of numerical control machine. 2017 IEEE International Conference on Prognostics and Health Management, ICPHM 2017. June 19-21, 2017, Dallas, USA. pp. 222-226. (EI：20173604113012)

2016年

[1]． Xiang Wan, Guanghua Xu, Qing Zhang, Peter W. Tse, Haihui Tan. A quantitative method for evaluating numerical simulation accuracy of time-transient Lamb wave propagation with its applications to selecting appropriate element size and time step. Ultrasonics. Vol. 64, 2016, pp25-42. (SCI：CS2LD)

[2]． Xiang Wan, Dong Wang, Peter W. Tse, Guanghua Xu, Qing Zhang. A critical study of different dimensionality reduction methods for gear crack degradation assessment under different operating conditions, Measurement, Vol. 78, 2016, pp:138-150. (SCI：CW6KC)

[3]． Xiang Wang, Peter W. Tse, Guanghua Xu, Tangfei Tao, Qing Zhang. Analytical and numerical studies of apporximate phase velocity matching based nonlinear S0 mode lamb waves for the detection of evenly distributed microstructural changes. Smart Materials and Structures, Vol. 25, No. 4, 2016, pp : 1-19. (SCI ：DL4AQ)

[4]． Tao Xu, Guanghua Xu, Qing Zhang, et al. An optimum preload method for machine tool spindle ball bearings. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Vol. 230, No.11, 2016. (SCI：ED7TF)

2015年

[1]． Qing Zhang, Peter. W. Tse, Xiang Wan, Guanghua Xu. Remaining useful life estimation for mechanical systems based on similarity of phase space trajectory. Expert Systems with Applications. Vol. 42, No.5, 2015, pp2353-2360. (SCI：CA0PS)

[2]． Qing Zhang, Fei Liu, Xiang Wan, Guanghua Xu. An adaptive support vector regression machine for the state prognosis of mechanical systems. Shock and Vibration. Vol. 2015, Article ID: 469165, 2015. (SCI：CV21C)

[3]． Yi Wang, Guanghua Xu, Qing Zhang, et al. Rotating speed isolation and its application to rolling element bearing fault diagnosis under large speed variation conditions. Journal of Sound and vibration. Vol. 348, 2015, pp381-396. (SCI:CG6JJ)

[4]． Fei Liu, Guanghua Xu, Qing Zhang(通讯作者), et al. Intersecting chord method for minimum circumscribed sphere and maximum inscribed sphere evaluations of sphericity error. Measurement Science and Technology. Vol. 26, No.11, 2015. (SCI：CY3ZU)

2014年

[1]． Qing Zhang, Cheng Hua, Guanghua Xu. A mixture Weibull proportional hazard model for mechanical system failure prediction utilising lifetime and monitoring data, Mechanical Systems and Signal Processing, Vol. 43, No.1-2, 2014, pp103-112. (SCI：292HB)

[2]． Xiang Wan, Qing Zhang(通讯作者), Guanghua Xu, et al. Numerical simulation of nonlinear lamb waves used in a thin plate for detecting buried micro-cracks, Sensors, Vol.14, 2014, pp.8528-8546. (SCI：A17WM)

[3]． Tao Xu, Qing Zhang, Guanghua Xu, et al. Experimental study on preload analytical method for ball bearings based on performance, 27th International Congress of Condition Monitoring and Diagnostic Engineering, Australia, Brisbane, 16-18 September, 2014.

[4]． Changxu Zhu, Qing Zhang, Guanghua Xu, et al. A rapid self-adaptive condition monitoring method based on dynamic multi-layer image model, 27th International Congress of Condition Monitoring and Diagnostic Engineering, Australia, Brisbane, 16-18 September, 2014.

2013年

[1]． Qing Zhang, Jing Wang, Yizhuo Zhang, et al. Numerical simulation and manifold learning for the vibration of molten steel draining from a ladle, Journal of Vibroengineering, Vol.15, No.2, 2013, pp.549-557. (SCI：168OD)

[2]． Jing Wang, Qing Zhang(通讯作者), Yizhuo Zhang, et al. Automatic artifacts removal from epileptic EEG using a hybrid algorithm, Journal of Vibroengineering, Vol.15, No.1, 2013, pp.477-487. (SCI：113BZ)

[3]． Jing Wang, Qing Zhang(通讯作者), Guanghua Xu. Extraction of operation characteristic in mechanical systems using genetic morphological filter, Journal of Vibroengineering, Vol.15, No.1, 2013, pp.185-195. (SCI：113BZ)

[4]． Cheng Hua, Qing Zhang, Guanghua Xu, et al. Performance reliability estimation method based on adaptive failure threshold, Mechanical Systems and Signal Processing, Vol.36, No.2, 2013, pp. 505-519. (SCI：149EP)

[5]． Tao Xu, Guanghua Xu, Qing Zhang, et al. A preload analytical method for ball bearings utilising bearing skidding criterion, Tribology International, Vol.67, No.11, 2013, pp. 44-50. (SCI：240XT)

[6]． 刘晗，张庆(通讯作者)，孟理华，杨凯，徐光华. 基于Parzen窗估计的设备状态综合报警方法. 振动与冲击，vol.32, No.3, 2013, pp.110-114. (EI: 20131416162285)

2012年

[1]． Qing Zhang, Jing Wang, Guanghua Xu. A new density estimation neural network to detect abnormal condition in streaming data, Journal of Vibroengineering, Vol.14, No.2, 2012, pp.621-632. (SCI：960AZ)

[2]． Cheng Hua, Guanghua Xu, Qing Zhang(通讯作者), et al. Long-term potential performance degradation analysis method based on dynamical probability mode, Expert Systems with Applications, Vol.39, No.4, 2012, pp. 4410-4417. (SCI：882SH)

[3]． Qing Zhang, Jing Wang, Junjie Zeng, Guanghua Xu. A dynamic memory model for mechanical fault diagnosis using one-class support vector machine, 8th IEEE International Conference on Automation Science and Engineering, August 20-24, 2012, Seoul, Korea. pp. 497-501. (EI：20130415934450)

[4]．   张庆，周璠，华成，徐光华. 基于信息模型的数控机床可靠性系统构建，计算机工程，vol.38, No.13, 2012, pp. 224-227.

[5]． Tao Xu, Guanghua Xu, Qing Zhang, Cheng Hua, Qianqian He. Estimation for bearing preload of machine tool spindle based on vibration signal, Applied Mechanics and Materials, 2012, Vols. 236-237, pp 1251-1257.

2011年及之前论文：

[1]． 张庆，徐光华，华成，张熠卓. 一类支持向量机的设备状态自适应报警方法，西安交通大学学报，vol.43, No.11, 2009, pp.61-65. (EI: 20095012535728)

[2]． 华成，张庆(通讯作者)，徐光华，谢俊，李淑智. 动态概率模型跟踪性能退化的实时可靠性评估方法，西安交通大学学报，vol.44, No.1, 2010, pp.46-50. (EI: 20100912740892)

[3]． 张庆，徐光华，王晶，程晓文. 基于免疫优化形态学滤波器的癫痫棘波检测方法，软件，vol.32, No.11, 2011, pp.10-12.

[4]． 张庆，徐光华，刘弹，王晶．设备状态点检信息网络化管理系统的设计与实现，计算机工程，2006，32(14)：227-229.（EI：063410084428）

[5]． 张庆，徐光华，王晶，梁霖．基于支持向量域描述的多故障诊断动态模型，西安交通大学学报，2007，41(5)：593-597．（EI：072510662815）

[6]． 张庆，张继锐，徐光华，陆杨．基于状态的设备管理系统的设计与实现，计算机工程与应用，2006，42(15)：179-181．

[7]． 张庆，徐光华．基于滑动概率神经网络的早期故障诊断技术，西安交通大学学报，2006，40(9)：1036-1040．（EI：064610239843）

[8]． 张庆，赵延安，贾维银，徐光华．铁路车辆轮对轴承不解体检测系统，振动、测试与诊断，2004，24(3)：65-68.（EI：04268238841）

[9]． Zhang Qing, Xu Guanghua, Wang Jing, Liu Dan. An Integrated Information System for Route Inspection in Manufacturing, International Federation for Information Processing, Research and Practical Issues of Enterprise Information Systems, Boston: Springer, 2006, vol.205: 479-487.

[10]．   Zhang Qing, Xu Guanghua. Data quality assurance techniques for monitoring and diagnosis system, International Journal of Plant Engineering and Management, 2007，12(2)：107-115.

[11]．   Jing Wang, Qing Zhang(通讯作者), Guanghua Xu. Genetic stochastic resonance: a new fault diagnosis method to detect weak signals in mechanical systems. Advance Science Letters, Vol.4, No.6-7, 2011, 2508-2512. (SCI：822OI)

[12]．   华成，张庆，徐光华，阎对丰，谢俊. 具有小世界特性的复杂液压系统故障源搜索方法，西安交通大学学报，vol.44, No.7, 2010, pp.79-84. (EI: 20103113111503)

[13]．   王晶，张庆，梁霖，张熠卓，徐光华. 采用遗传算法的自适应随机共振系统弱信号检测方法研究，西安交通大学学报，vol.44, No.3, 2010, pp.32-36. (EI: 20101712897019)

[14]．   Jing Wang, Guanghua Xu, Qing Zhang, Lin Liang. Application of Improved Morphological Filter to the Extraction of Impulsive Attenuation Signals. Mechanical Systems and Signal Processing, Vol.23, No.1, 2009, pp. 236-245. (SCI：373FR)

[15]．   华成，徐光华，张庆，刘弹，李红军. 基于CBR的智能维修决策技术研究与应用，仪器仪表学报，Vol.30, No.Supp.2, 2010, pp.403-407. (EI: 20100512678699)

[16]．   Cheng Hua, Guanghua Xu, Qing Zhang, et al. Real-time multivariate performance degradation assessment based on a cerebellar model articulation controller, COMADEM 2010, Jun 28-July 2, 2010, Nara, Japan. pp. 513-519. (EI：20103613221123)

[17]．   Guanghua Xu, Jing Wang, Qing Zhang, Sicong Zhang, Junming Zhu. A Spike Detection Method in EEG Based on Improved Morphological Filter, Computers in Biology and Medicine, Vol.37, No.11, 2007, pp. 1647-1652. (SCI：220VL)

[18]．     Guanghua Xu, Jing Wang, Qing Zhang, Junming Zhu. An Epileptic Seizure Prediction Algorithm From Scalp EEG Based on Morphological Filter and Kolmogorov Complexity, Lecture Notes in Computer Science, Vol. 4561, 2007, pp. 736-746. (EI：080411041823)

[19]．   Guanghua Xu, Jing Wang, Qing Zhang, Junming Zhu. An automatic EEG spike detection algorithm using morphological filter. Proceedings of the 2006 IEEE conference on automation science and engineering. Shanghai, China, October 7-10, 2006: 180~185. (EI：082511327549)