(1.)Basic Information


 

(7.)Contact

State Key Laboratory For Mechanical Behavior Of Materials,

Xi’an Jiaotong University,
Xi’an, 710049, China

Tel: (+86) 029-82667942 
E-mail:zhongqishi@mail.xjtu.edu.cn
 

 

 

(3.)Education

B.S.
Materials science and engineering
Xi’an Jiaotong Unicersity, China
2000.9-2004.7
Ph.D.
Materials science and engineering
Xi’an Jiaotong Unicersity, China
2004.9-2009.10
Ph.D.
Materials processing and engineering
Osaka University, Japan
2007.10-2009.9

(2.)Positions

 

2018.12-

School of Materials science and engineering

(Xi'an Jiaotong University)

Professor

2011.12-2018.12

School of Materials science and engineering

(Xi'an Jiaotong University)

Associate Professor

2009.10-2011.12

School of Materials science and engineering

(Xi'an Jiaotong University)

Lecturer

(5.)Scientific Research

1) Combustion Synthesis of Ceramic Powders
2) High-Thermal-Conductivity Ceramics and Composites
3) Porous Ceramics
4) New Energy Nanomaterials
 

(6.)Teaching

BOOK

[1]    Zhongqi Shi, Yoshinari Miyamoto, Hailong Wang; Combustion Synthesis of Aluminum Nitride (AlN) Powders with Controlled Grain Morphologies. In Nitride Ceramics: Combustion Synthesis, Properties, and Applications; Alexander A. Gromov and Liudmila N. Chukhlomina Eds., Wiley-VCH: Weinheim, Germany, 2015; Chapter 3, pp 75-95.

 

PAPER

2020

[1]    Zhiyuan Li, Ke Wang*, Bangzhi Ge, Zhejian Zhang, Zhilei Wei, Zhongqi Shi*, Guanjun Qiao. Synergistic enhancement of sinterability and corrosion resistance of ZnCr2O4 spinel by TiO2 addition for carbon-free aluminum electrolysis [J]. Chemical Engineering Journal, 2020, 400, 125924.

[2]    Zhilei Wei, Wenqi Xie, Bangzhi Ge, Zhejian Zhang, Wanli Yang, Hongyan Xia, Bo Wang, Haiyun Jin, Naikui Gao, Zhongqi Shi*. Enhanced thermal conductivity of epoxy composites by constructing aluminum nitride honeycomb reinforcements [J]. Composites Science and Technology, 2020, 108304.

[3]    Zhilei Wei, Wenqi Xie, Xiaoyu Zhang, Zhejian Zhang, Yanjun Li, Hongyan Xia, Bo Wang, Zhongqi Shi*. Preparation of AlN micro-honeycombs with high permeability via freeze-casting [J]. Journal of the European Ceramic Society, 2020, 40(13): 4462-4468.

[4]    Xiaoyu Zhang, Wenqi Xie, Bangzhi Ge, Ke Wang, Zhongqi Shi*, Wanli Yang, Hongyan Xia, Jiping Wang. Enhancing the mechanical and thermophysical properties of highly oriented graphite flake composites by formation of a uniform three dimensional tungsten carbide skeleton reinforcement [J]. Composites Part A: Applied Science and Manufacturing, 2020, 131: 105800.

[5]    Zhejian Zhang, Bangzhi Ge, Wenqi Xie, Zhilei Wei, Wanli Yang, Yanjun Li, Zhongqi Shi*. Effect of Si alloying content on the microstructure and thermophysical properties of SiC honeycomb/Al–Mg–Si composites prepared by spontaneous infiltration [J]. Ceramics International, 2020, 46(8): 10934-10941.

[6]    Yongfeng Kang*, Bin Li*, Jingyi Zhao, Bangzhi Ge, Ming Weng, Zhongqi Shi*, Yuqing Zhao. Effect of structure on the secondary electron emission of tetrahedral amorphous carbon films [J]. Vacuum, 2020, 172: 109043.

[7]    Jian Yang#, Xiangzhao Zhang#, Guiwu Liu*, Lijun Zhao, Junlin Liu*, Zhongqi Shi, Jianning Ding, Guanjun Qiao*. Multiscale structure and band configuration tuning to achieve high thermoelectric properties in n-type PbS bulks [J]. Nano Energy, 2020, 74: 104826.

[8]    李倩,张彪,史忠旗*,康永锋. Bi3+离子浓度对Y2O3基荧光粉发光性能的影响[J]. 硅酸盐学报2020, .

[9]    李紫璇,郝留成,张建飞,周小楠,黄 鑫,史忠旗,杨建锋,王波*. 前驱体法合成氮化铝纳米材料及其生长机制[J]. 硅酸盐学报2020,48(6): DOI10.14062/j.issn.0454-5648.20190776.

[10]   

 

2019

[11]  Bangzhi Ge, Jiabin Hu, Zhongqi Shi*, Hailong Wang, Hongyan Xia, Guanjun Qiao. Integration of multi-scale defects for optimizing thermoelectric properties of n-type Cu1-xCdxFeS2 (x=0-0.1) [J]. Nanoscale, 2019, 11, 17340–17349.

[12]  Bangzhi Ge, Zhongqi Shi*, Chongjian Zhou, Jiabin Hu, Guiwu Liu, Hongyan Xia, Jingtao Xu, Guanjun Qiao. Enhanced thermoelectric performance of n-type eco-friendly material Cu1-xAgxFeS2 (x=0-0.14) via bandgap tuning [J]. Journal of Alloys and Compounds, 2019, 809:151717.

[13]  Zhejian Zhang, Zhongqi Shi*, Biguo Yang, Bangzhi Ge, Xiaoyu Zhang, Yajie Guo. Preparation and anisotropic thermophysical properties of SiC honeycomb/Al-Mg-Si composite via spontaneous infiltration [J]. Progress in Natural Science: Materials International, 2019, 29(2): 177-183.

[14]  Liu-Cheng Hao, Zi-Xuan Li, Fan Sun, Ke Ding, Xiao-Nan Zhou, Zhong-Xiao Song, Zhong-Qi Shi, Jian-Feng Yang, Bo Wang*. High-performance epoxy composites reinforced with three-dimensional Al2O3 ceramic framework [J]. Composites Part A: Applied Science and Manufacturing, 2019, 127: 105648

[15]  Jian Yang, Junnan Yan, Guiwu Liu*, Zhongqi Shi, Guanjun Qiao*. Improved thermoelectric properties of n-type Bi2S3 via grain boundaries and in-situ nanoprecipitates [J]. Journal of the European Ceramic Society, 2019, 39(4): 1214-1221.

[16]  Jian Yang, Liuxu Yu, Tingting Wang, Junnan Yan, Guiwu Liu*, Zhongqi Shi, Guanjun Qiao*. Thermoelectric properties of n-type CuxBi2S3 materials fabricated by plasma activated sintering [J]. Journal of Alloys and Compounds, 2019, 780: 35-40.

[17]  Junnan Yan, Jian Yang, Bangzhi Ge, Guiwu Liu*, Zhongqi Shi, Zhewen Duan, Guanjun Qiao*. Effect of Silver and Iodine Co-doping on the Thermoelectric Properties of n-Type Bi2S3 [J]. Journal of Electronic Materials, 2019, 48(1): 503–508.

[18]  Bangzhi Ge, Jiabin Hu, Qiong Wang, Hongyan Xia, Shunjian Xu*, Zhongqi Shi*. Cu1.75Te nanowires as building blocks to fabricate bulk materials with enhanced thermoelectric performance [J]. Materials Technology: Advanced Performance Materials, http://dx.doi.org/10.1080/10667857.2019.1699271.

[19]  Zhejian Zhang, Yuan Yuan, Wenqi Xie, Yuchen Deng, Zhilei Wei, Dangui Liu, Zhongqi Shi*. Tailoring the thermophysical properties of porous SiC framework reinforced Al-Mg-Si composites by Si alloying content for thermal energy management [J]. Materials Technology: Advanced Performance Materials, http://dx.doi.org/10.1080/10667857.2019.1702309.

[20]  杨万利*, 代丽娜, 樊振宁, 张瀚晨, 史忠旗. PAS烧结SiC/h-BN复相陶瓷的韧性表征[J]. 材料导报, 2019, 33(4): 1272-1275.

[21]  唐红川, 李鹏虎, 匡国文, 李倩, 史忠旗, 高乃奎, 金海云*. 陶瓷化硅橡胶研究进展[J].绝缘材料, 2019, 52(7): 1-9.

 

2018

[22]  Jiawen Li, Hailong Wang*, Wenhao Dong, Zhongqi Shi, Wenqi Xie, Huali Qiao, Qiaoyan Yu, Min Zhang, Jiabin Hu, Lei Yang, Jiaying Hong. Phase transition dominated high-rate performances of the high voltage LiNi0.5Mn1.5O4 cathode: Improvement on structure evolution and ionic diffusivity by Cr doping [J]. The Journal of Physical Chemistry C, 2018, 122(44): 25229-25236.

[23]  Yajie Guo, Dong Guo, Shibo Wang, Bingxiang Gao, Xingang Wang*, Zhongqi Shi*. Field-assisted solid phase sintering of W-20 wt.% Cu nanocomposites prepared by co-precipitation method[J]. Materials Express, 2018, 8(6):547–554.

[24]  Yajie Guo, Dong Guo, Feng Ye, Ke Wang*, Zhongqi Shi *, Xianjue Chen, Chuan Zhao*. Self-supported NiSe2 nanowire arrays on carbon fiber paper as efficient and stable electrode for hydrogen evolution reaction [J]. ACS Sustainable Chemistry & Engineering, 2018, 6 (9): 11884–11891.

[25]  Chongjian Zhou, Chaochao Dun, Bangzhi Ge, Ke Wang, Zhongqi Shi *, Guiwu Liu, David L. Carroll*, Guanjun Qiao. Highly robust and flexible n-type thermoelectric film based on Ag2Te nanoshuttle/polyvinylidene fluoride hybrids [J]. Nanoscale, 2018, 10, 14830–14834.

[26]  Lei Su, Hongjie Wang*, Min Niu, Xingyu Fan, Mingbo Ma, Zhongqi Shi, Sheng-Wu Guo. Ultralight, recoverable, and high temperature-resistant SiC nanowire aerogel [J]. ACS Nano, 2018, 12(4), 3103–3111.

[27]  Zhiyuan Li, Zhongqi Shi*, Zhejian Zhang, Rongdi Liu, Ying Liu, Jing Li, Guanjun Qiao. Corrosion resistance of the ZnCr2O4 spinel in NaF-KF-AlF3 bath [J]. Corrosion Science, 2018, 131: 199-207.

[28]  Xiaoyu Zhang, Zhongqi Shi*, Xia Zhang, Ke Wang, Yingying Zhao, Hongyan Xia, Jiping Wang. Three dimensional AlN skeleton-reinforced highly oriented graphite flake composites with excellent mechanical and thermophysical properties [J]. Carbon, 2018,131: 94-101.

[29]  Yanjun Li*, Donghua Liu, Bangzhi Ge, Zhongqi Shi, Zhihao Jin. Fabrication of Si2N2O ceramic with silicon kerf waste as raw material [J]. Ceramics International, 2018, 44(5): 5581-5586.

 

2017

[30]  Chongjian Zhou, Zhongqi Shi*, Bangzhi Ge, Ke Wang, Danli Zhang, Guiwu Liu, Guanjun Qiao. Scalable solution based synthesis of component controllable ultrathin PbTe1-xSex nanowires with high n-type thermoelectric performance [J]. Journal of Materials Chemistry A, 2017, 5: 2876-2884.

[31]  Yajie Guo*, Dong Guo, Feng Ye, Ke Wang*, Zhongqi Shi*. Synthesis of lawn-like NiS2 nanowires on carbon fiber paper as bifunctional electrode for water splitting [J]. International Journal of Hydrogen Energy, 2017, 42(27): 17038-17048.

[32]  Yi Liu*, Yingxin Li, Fan Li, Han Cui, Yongping Pu, Shouwu Guo, Zhongqi Shi*. Highly textured Ti2AlN ceramic prepared via thermal explosion followed by edge-free spark plasma sintering [J]. Scripta Materialia, 2017, 136:55-58.

[33]  Jian Yang, Guiwu Liu*, Zhongqi Shi, Jianping Lin, Xiang Ma, Ziwei Xu, Guanjun Qiao. An insight into β-Zn4Sb3 from its crystal structure, thermoelectric performance, thermal stability and graded material [J]. Materials Today Energy, 2017, 3: 72-83.

[34]  Yanjun Li*, Bangzhi Ge, Zhihong Wu, Guoqing Xiao, Zhongqi Shi*, Zhihao Jin. Effects of h-BN on mechanical properties of reaction bonded β-SiAlON/h-BN composites [J]. Journal of Alloys and Compounds, 2017, 703: 180-187.

[35]  Wanli Yang*, Zhigang Peng, Lina Dai, Zhongqi Shi, Zhihao Jin. Thermal shock resistance of Si3N4/h-BN composites prepared via catalytic reaction-bonding route[J]. Journal of Materials Engineering and Performance, 2017, 26(9): 4291–4296.

[36]  Sheng Lei, Zhongqi Shi, Junfei Ou, Fajun Wang, Mingshan Xue, Wen Li*, Guanjun Qiao*, Xinhai Guan, Jie Zhang. Durable superhydrophobic cotton fabric for oil/water separation [J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2017, 533:249-254.

[37]  Jian Yang, Guiwu Liu*, Junnan Yan, Xiangzhao Zhang, Zhongqi Shi, Guanjun Qiao*. Enhanced the thermoelectric properties of n-type Bi2S3 polycrystalline by iodine doping [J]. Journal of Alloys and Compounds, 2017, 728:351-356.

[38]  Jian Yang, Xiangzhao Zhang, Bangzhi Ge, Junnan Yan, Guiwu Liu*, Zhongqi Shi, Guanjun Qiao*. Effect of Zn migration on the thermoelectric properties of Zn4Sb3 material [J]. Ceramics International, 2017, 43(17): 15275-15280.

[39]  Yajie Guo*, Haotian Guo, Bingxiang Gao, Xingang Wang, Zhongqi Shi*. Rapid consolidation of ultrafine grained W-30 wt.% Cu composites by field assisted sintering from the sol-gel prepared nanopowders [J]. Journal of Alloys and Compounds, 2017, 724:155-162.

[40]  Kuo Zhang, Zhongqi Shi*, Xiaoyu Zhang, Zhejian Zhang, Bangzhi Ge, Hongyan Xia, Yajie Guo, Guanjun Qiao. Molten salt synthesis of continuous tungsten carbide coatings on graphite flakes [J]. Ceramics International, 2017, 43: 8089-8097.

[41]  Han Jin, Zhongqi Shi*, Xiaodan Li, Yongfeng Li*, Hongyan Xia, Zhuo Xu, Guanjun Qiao. Effect of rare earth oxides on the microstructure and properties of mullite/hBN composites [J]. Ceramics International, 2017, 43(3): 3356-3362.

[42]  Yanjun Li*, Donghua Liu, Han Jin, Donghai Ding, Guoqing Xiao, Zhongqi Shi*, Zhihao Jin. Effect of Z values on the microstructure and mechanical properties of post-sintered reaction bonded β-SiAlON [J]. High Temperature Materials and Processes, 2017, 36(5): 453-458.

[43]  杨万利*, 代丽娜, 谢小娟, 史忠旗. SiC-石墨复相陶瓷的反应连接法焊接特性[J]. 耐火材料, 2017, 51(2): 123-126.

[44]  杨万利*, 代丽娜, 史忠旗, 肖志超, 张旭辉.浸渍热解对常压烧结SiC/h-BN陶瓷力学性能的影响[J]. 材料研究学报, 2017, 31(8): 635-640.

 

2016

[45]  Chongjian Zhou, Chaochao Dun, Ke Wang, Xia Zhang, Zhongqi Shi*, Guiwu Liu*, Corey A. Hewitt, Guanjun Qiao, David L. Carroll*. General method of synthesis ultrathin ternary metal chalcogenide nanowires for potential thermoelectric applications [J]. Nano Energy, 2016, 30: 709-716.

[46]  Ke Wang, Zhiguo Ye, Chenqi Liu, Dan Xi, Chongjian Zhou, Zhongqi Shi*, Hongyan Xia, Guiwu Liu*, Guanjun Qiao. Morphology-controllable synthesis of cobalt telluride branched nanostructures on carbon fiber paper as electrocatalysts for hydrogen evolution reaction [J]. ACS Applied Materials & Interfaces, 2016, 8(5): 2910–2916.

[47]  Sheng Lei, Zhongqi Shi, Junfei Ou, Wen Li*, Guanjun Qiao*, Xinhua Yu. A facile process for preparing superhydrophobic PBZ-PTFE coating with excellent stable properties [J]. Applied Physics A, 2016, 122:1011.

[48]  Hongyan Xia, Ke Wang, Shaohui Yang, Zhongqi Shi, Hongjie Wang, Jiping Wang*. Formation of graphene flowers during high temperature activation of mesocarbon microbeads with KOH [J]. Microporous & Mesoporous Materials, 2016, 234: 384-391.

[49]  Yajie Guo, Yuqing Wang, Bingxiang Gao, Zhongqi Shi, Zhanwei Yuan*. Rapid diffusion bonding of WC-Co cemented carbide to 40Cr steel with Ni interlayer: Effect of surface roughness and interlayer thickness [J]. Ceramics International, 2016, 42(15):16729–16737.

[50]  Han Jin, Yongfeng Li*, Xiaodan Li, Zhongqi Shi*, Hongyan Xia, Zhuo Xu, Guanjun Qiao. Functionalization of hexagonal boron nitride in large scale by a low-temperature oxidation route [J]. Materials Letters, 2016, 175: 244-247.

[51]  Yanjun Li*, Donghua Liu, Cunfeng Zeng, Zhongqi Shi*, Zhihao Jin. Effects of Sm2O3 content on the microstructure and mechanical properties of post-sintered reaction-bonded β-SiAlON [J]. Journal of Materials Engineering and Performance, 2016, 25(3), 1143-1149.

[52]  Kuo Zhang, Zhongqi Shi*,Hongyan Xia, Ke Wang, Guiwu Liu, Guanjun Qiao*, Jianfeng Yang. Preparation and thermophysical properties of directional SiC/Cu-Si composite via spontaneous infiltration [J]. Ceramics International, 2016, 42, 996-1001.

[53]  Han Jin, Yongfeng Li*, Zhongqi Shi, Hongyan Xia, Guanjun Qiao. Effect of Y2O3 on the sintering, mechanical and dielectric properties of mullite/h-BN composites [J]. Materials Science Forum, 2016, 848:28-31.

[54]  Santuan Zhao, Xiangzhao Zhang, Guiwu Liu, Hongyan Xia, Zhongqi Shi, Guanjun Qiao. Wetting and Interfacial Behavior of Molten Al on Mo-Ni(Co)-Si Coated SiC Ceramic [J]. Key Engineering Materials, 2016, 697, 481-484.

[55]  张超, 费友健, 史忠旗, 刘桂武, 乔冠军*. SiC/β-Zn4Sb3复合热电材料的制备及性能[J]. 硅酸盐学报2016,44(6): 808-812.

[56]  张昊, 史忠旗, 胡梦杉, 张朋, 金海云*, 金志浩, 乔冠军. Mo元素掺杂对氧化铝基陶瓷/金属复合材料微观形貌及介电性能的影响[J]. 稀有金属材料与工程, 2016, 45(10): 2583-2586.

 

2015

[57]  Ke Wang, Chongjian Zhou, Dan Xi, Zhongqi Shi*, Cheng He*, Hongyan Xia, Guiwu Liu*, Guanjun Qiao. Component-controllable synthesis of Co(SxSe1−x)2 nanowires supported by carbon fibre paper as high-performance electrode for hydrogen evolution reaction [J]. Nano Energy, 2015, 18: 1-11.

[58]  Chongjian Zhou, Chaochao Dun, Qiong Wang, Ke Wang, Zhongqi Shi*, David L. Carroll*, Guiwu Liu*, Guanjun Qiao. Nanowires as build block to fabricate flexible thermoelectric fabric: the case of copper telluride nanowires [J]. ACS Applied Materials & Interfaces, 2015, 7(38): 21015–21020.

[59]  Ke Wang, Dan Xi, Chongjian Zhou, Zhongqi Shi*, Hongyan Xia, Guiwu Liu, Guanjun Qiao*. CoSe2 necklace-like nanowires supported by carbon fiber paper: a 3D integrated electrode for the hydrogen evolution reaction [J]. Journal of Materials Chemistry A, 2015, 3, 9415~9420.

[60]  Chongjian Zhou, Ke Wang, Chaochao Dun, Qiong Wang, Zhongqi Shi*, Guiwu Liu*, Guanjun Qiao. Environmentally benign synthesis of high-quality, band gap-tunable, homogeneous Te/Se alloyed nanowires [J]. RSC Advances, 2015, 5, 69268~69272.

[61]  Hongyan Xia, Xia Zhang, Zhongqi Shi*, Changjian Zhao, Yongfeng Li, Jiping Wang, Guanjun Qiao. Mechanical and thermal properties of reduced graphene oxide reinforced aluminum nitride ceramic composites [J]. Materials Science and Engineering: A, 2015, 639: 29~36.

[62]  Hailong Wang*, Zhongqi Shi, Jiawen Li, Shuo Yang, Ruibo Ren, Jianyou Cui, Jiali Xiao, Bo Zhang. Direct carbon coating at high temperature on LiNi0.5Mn1.5O4 cathode: Unexpected influence on crystal structure and electrochemical performances [J].Journal of Power Sources, 2015, 288: 206~213.

[63]  C. He, G. Liu, W. X. Zhang*, Z.Q. Shi*, S. L. Zhou. Tuning structures and electron transport properties of ultrathin Cu nanowires by size and bending stress using DFT and DFTB methods [J]. RSC Advances, 2015, 5, 22463~22470.

[64]  Yanjun Li, Hailiang Yu, Zhongqi Shi*, Haiyun Jin*, Guanjun Qiao, Zhihao Jin. Synthesis of β-SiAlON/h-BN nanocomposite by a precursor infiltration and pyrolysis (PIP) route [J]. Materials Letters, 2015, 139 (1): 303~306.

[65]  Zhongqi Shi*, Yongyong Zou, Ruifeng Jing, Kuo Zhang, Guanjun Qiao, Hongjie Wang. Red-emitting AlN:Mn2+ phosphors prepared by combustion synthesis [J]. Functional Materials Letters, 2015, 8(2): 1550025 (4 pages).

[66]  Ke Wang, Zhongqi Shi*, Yuanyuan Wang, Zhiguo Ye, Hongyan Xia, Guiwu Liu, Guanjun Qiao*. Co3O4 nanowires@MnO2 nanolayer or nanoflakes core-shell arrays for high-performance supercapacitors: the influence of morphology on performance [J]. Journal of Alloys and Compounds, 2015, 624: 85~93.

[67]  Yanjun Li, Hailiang Yu, Haiyun Jin*, Zhongqi Shi*, Guanjun Qiao, Zhihao Jin. Fast heating thermal shock test for β-SiAlON with molten metals as heating medium [J]. Ceramics International, 2015, 41 (4): 6117~6121.

[68]  Yanjun Li, Hailiang Yu, Haiyun Jin*, Zhongqi Shi*, Guanjun Qiao, Zhihao Jin. Properties of reaction bonded β-Sialon ceramic doped by FeMo alloy for the application in molten aluminum environment [J]. International Journal of Minerals, Metallurgy and Materials, 2015, 22(5): 530~536.

[69]  Kuo Zhang, Hongyan Xia, Bo Wang, Xiangzhao Zhang, Zhongqi Shi*, Guiwu Liu, Guanjun Qiao. Preparation and thermal-physical properties of three dimensional bicontinuous SiC/Cu-Si composite [J]. Materials Science Forum, 2015, 804:187~190.

[70]  Kuo Zhang, Zhongqi Shi*, Guiwu Liu, Guanjun Qiao. SiC/Cu composite prepared by spontaneous infiltration of copper alloy into porous SiC ceramic [J]. Materials Science Forum, 2015, 814:569~573.

[71]  Yingying Zhao, Hongyan Xia, Rui Tang, Zhongqi Shi, Jianfeng Yang, Jiping Wang*. A low cost preparation of C/SiC composites by infiltrating molten Si into gelcasted pure porous carbon preform [J]. Ceramics International, 2015, 41(5): 6478~6487.

[72]  C. He, R.Y. Huang, Z.Q. Shi, W. X. Zhang*. Coupling of electric field and bending modulated ballistic transport properties of copper nanowires [J]. Materials Technology: Advanced Performance Materials, 2015, 30(A1): A36~A40.

[73]  黄丽, 赵莹莹, 王卫敏, 唐睿, 史忠旗, 王继平*. 以中间相碳微球为碳源制备碳材料的凝胶注模工艺[J]. 机械工程材料, 2015, 39(2):54~59.

[74]  杨万利*, 史忠旗, 张永辉, 肖志超, 乔冠军, 金志浩. /锌浸液部件用非铁基耐熔蚀材料及其耐熔蚀机制研究进展[J]. 耐火材料, 2015,49(4):313~318.

 

2014

[75]  Zhongqi Shi*, Zhilei Wei, Cheng He*, Ruifeng Jing, Hongjie Wang and Guanjun Qiao. Synthesis, crystal structure and photoluminescence of novel blue-emitting Eu2+–doped (SiC)x–(AlN)1-x phosphors by nitriding combustion reaction [J]. RSC Advances, 2014, 4, 62926~62934.

[76]  Hongyan Xia, Wenbin Wang, Zhongqi Shi*. Mechanical properties of reactive powder concrete with ultra-short brass-coated steel fibres [J]. Magazine of Concrete Research, 2014, 2014, 67(6): 308~316.

[77]  Zhongqi Shi*, Changjian Zhao, Hailong Wang, Guanjun Qiao, Hongjie Wang. Combustion synthesis of AlN nanowhiskers with different metallic catalysts [J]. Materials Letters, 2014, 128: 156~159.

[78]  Yajie Guo*, Zhongqi Shi, Yiku Xu, Guanjun Qiao, Jian Wang. Microstructure and tensile behavior of Ni-base metal-intermetallic laminate composites prepared by plasma activated sintering [J]. Rare Metal Materials and Engineering. 2014, 43(4): 813~818.

[79]  Yajie Guo, Zhongqi Shi*, Yiku Xu, Guanjun Qiao. Correlation between microstructure and tensile behavior of metal–intermetallic laminate compound with different initial Ni foil thickness [J]. Rare Metals, 2014, 33(2):196~202.

[80]  Gang Zhang, Guiwu Liu, Zhongqi Shi, Guanjun Qiao. Dynamics of spinodal decomposition coupled with chemical reaction in thermosetting phenolformaldehyde resin-based solutions and its application in monolithic porous materials [J]. RSC Advances, 2014, 4, 7068~7078.

[81]  Lei Fan, Meng Zhou, Hongjie Wang, Zhongqi Shi, Xuefeng Lu, Chao Wang. Low- temperature preparation of β-Si3N4 porous ceramics with a small amount of Li2O–Y2O3 [J]. Journal of the American Ceramic Society, 2014, 97(5): 1371~1374.

[82]  Guiwu Liu, Ying Han, Zhongqi Shi, Jiapeng Sun, Dening Zou, Guanjun Qiao. Hot deformation and optimization of process parameters of an as-cast 6Mo superaustenitic stainless steel: A study with processing map [J]. Materials & Design, 2014, 53:662~672.

[83]  Wanli Yang, Zhongqi Shi, Hailong Wang, Guanjun Qiao, Yongfeng Li, Jianfeng Yang,  Zhihao Jin. Effects of ZrO2 on the nitridation behavior and mechanical properties of reaction-bonded Si3N4/h-BN composite [J]. Journal of Materials Engineering and Performance, 2014, 23(10): 3436~3443.

[84]  Yanjun Li, Hailiang Yu, Haiyun Jin*, Donghua Liu, Guanjun Qiao, Zhihao Jin, Zhongqi Shi*. Effects of FeMo alloy on nitridation and mechanical properties of reaction bonded β-Sialon/FeMo ceramic composites [J]. Journal of Alloys and Compounds, 2014, 616:639~645.

[85]  Meng Chen, Chao Wang, Hongjie Wang, Lei Fan, Hongyan Xia, Zhongqi Shi. Fabrication of hierarchically porous Si3N4 foam ceramics with stamen-like cell structure [J]. Materials Letters, 2014, 128: 156~159.

[86]  Guiwu Liu, Xiangzhao Zhang, Qian Wang, Zhiguo Ye, Zhongqi Shi, Guanjun Qiao*. Interface and wear resistance of SiC ceramic column grid array reinforced high-chromium cast iron composite pretreated with TiH2 [J]. Rare Metal Materials and Engineering. 2014, 43(10): 2339~2343.

[87]  杨万利; 史忠旗; 李永锋; 赵常见; 乔冠军; 金志浩. SiC复相陶瓷内加热器套管的抗热震及抗氧化性能[J]. 硅酸盐学报, 2014, 42(6):698~702.

 

2013

[88]  Zhongqi Shi*, Wanli Yang, Yongfeng Kang, Guanjun Qiao, Zhihao Jin. Synthesis of AlN porous-shell hollow spheres by a combustion route [J]. Ceramics International, 2013, 39 (4): 4663~4667.

[89]  Zhongqi Shi*, Wanli Yang, Jiping Wang, Guiwu Liu, Guanjun Qiao, Zhihao Jin. Effect of interfacial structure on the thermal conductivity of carbon nanofibers reinforced aluminum nitride composites [J]. Ceramics International, 2013, 39 (3): 3365~3370.

[90]  Lei Fan, Zhongqi Shi, Xuefeng Lu, Chao Wang, Meng Chen, Yawen Li, Hongjie Wang. Silicon oxynitride ceramics prepared by plasma activated sintering of nanosized amorphous silicon nitride powder without additives [J]. Journal of the American Ceramic Society, 2013, 96(8): 2358~2361.

[91]  Hongyan Xia, Jiping Wang, Zhongqi Shi, Guanjun Qiao. Reciprocating friction and wear properties of mesocarbon microbeads-based graphite and siliconized graphite [J]. Journal of Nuclear Materials, 2013, 433 (1–3): 341~344.

 

2012

[92]  Cheng He, Wenxue Zhang, Zhongqi Shi, Jiping Wang, Hua Pan. Effect of bending stress on structures and quantum conduction of Cu nanowires [J]. Applied Physics Letters, 2012, 100 (22): 123107 (3 pages).

[93]  Hongyan Xia, Jiping Wang, Zhongqi Shi, Guiwu Liu, Guanjun Qiao. Sliding wear behavior of mesocarbon microbeads based carbon materials [J]. Wear, 2012, 274–275 (27): 260~266.

[94]  Wanli Yang, Zhongqi Shi, Zhihao Jin, and Guanjun Qiao. Effects of impregnating and heat treatment on the oxidation and thermal shock properties of pressureless sintered SiC/Graphite composites [J]. Materials Science Forum, 2012, 724: 311~314.

[95]  Yajie Guo, Zhongqi Shi, Hongwei Li, Guiwu Liu, and Guanjun Qiao. Microstructure evolution during combustion synthesis of Ni/Ni-aluminide laminated composites [J]. Materials Science Forum, 2012, 724: 319~322.

[96]  Cheng He, Wenxue Zhang, Li Duan, Qingwei Li, Zhongqi Shi*. First-principles investigation on Ag, N codoped in p-type ZnO [J]. Materials Science Forum, 2012, 724: 115~118.

[97]  Guiwu Liu, Wenzheng Jian, Haiyun Jin, Zhongqi Shi, Guanjun Qiao. Low-temperature and rapid fabrication of Bulk Nano-TiO2 ceramic [J]. Materials Science Forum, 2012, 724: 261~264.

[98]  郭亚杰, 刘桂武, 金海云, 史忠旗, 乔冠军. CuAl 箔扩散结合界面相生长行为研究.稀有金属材料与工程, 2012, 41(2): 281~284.

[99]  杨万利, 史忠旗, 金志浩, 乔冠军. 浸渍及热处理对常压烧结AlN/h-BN复相陶瓷微观结构及性能的影响 [J]. 硅酸盐学报, 2012, 40(6): 796~799.

[100]        杨万利, 史忠旗, 金志浩, 乔冠军. SiC复相陶瓷内加热器套管的制备及性能 [J]. 硅酸盐学报, 2012, 40(3): 362~365.

[101]        李永锋,刘萍,刘桂武,史忠旗,乔冠军. 氟化钙对常压烧结Si3N4/BN 复相陶瓷结构与性能的影响[J]. 硅酸盐学报, 2012, 40(8): 1163~1168.

 

2011

[102]        Zhongqi Shi*, Shugang Chen, Jiping Wang, Guanjun Qiao, Zhihao Jin. Mechanical and electrical properties of carbon nanofibers reinforced aluminum nitride composites prepared by plasma activated sintering [J]. Journal of the European Ceramic Society, 2011, 31(12): 2137~2143.

[103]        Zhongqi Shi*, Wanli Yang, Shujie Bai, Guanjun Qiao, Zhihao Jin. Preparation of Eu2+-doped AlN phosphors by plasma activated sintering [J]. Ceramics International, 2011, 37 (6): 2051~2054.

[104]        Yi Liu, Zhongqi Shi, Jiping Wang, Guanjun Qiao, Zhihao Jin, Zhijian Shen, Reactive Consolidation of layered-ternary Ti2AlN ceramics by spark plasma sintering of a Ti/AlN powder mixture [J]. Journal of the European Ceramic Society, 2011, 31(5): 863~868.

[105]        Guiwu Liu, Wenzheng Jian, Haiyun Jin, Zhongqi Shi, Guanjun Qiao. A high dielectric constant in nano-TiO2 ceramic prepared by rapid and high-pressure sintering process [J]. Scripta Materialia, 2011, 65(7): 588~591.

[106]        Hongyan Xia, Jiping Wang, Bin Huang, Zhongqi Shi, Guiwu Liu, Guanjun Qiao. The influence of ball-milling on improving the performance of mesocarbon microbeads based carbon block [J]. Materials Science and Engineering: A, 2011, 529 (25): 282~288.

[107]        Guiwu Liu, Wenzheng Jian, Haiyun Jin, Zhongqi Shi, Guanjun Qiao. Dielectric behavior of TiO2 ceramic prepared by plasma activated sintering [J]. Materials Letters, 2011, 65(23-24): 3468~3471. 

[108]        Yajie Guo, Guiwu Liu, Haiyun Jin, Zhongqi Shi, Guanjun Qiao. Intermetallic phase formation in diffusion-bonded Cu/Al laminates [J]. Journal of Materials Science, 2011, 46 (8): 2467~2473.

[109]        Wanli Yang, Zhongqi Shi, Hongwei Li, Zhen Li, Zhihao Jin, Guanjun Qiao. Improvement of strength and oxidation resistance for SiC/graphite composites by SiC coating [J]. IOP Conference Series: Materials Science and Engineering, 2011, 18: 022013 (4 pages).

[110]        Wanli Yang, Zhongqi Shi, Zhihao Jin, Guanjun Qiao. Effect of oxide additives on catalysis and microstructure of RBSN using low-purity silicon powder as raw materials [J]. Materials Science Forum, 2011, 695: 409~412.

[111]        郭亚杰, 刘桂武, 金海云, 史忠旗, 乔冠军. 扩散结合Cu/Al 叠层复合材料的界面结构与相生成机制. 稀有金属材料与工程, 2011, 40(s2): 215~220.

[112]        Zhongqi Shi*, Wanli Yang, Guanjun Qiao, Jianfeng Yang, Yoshinari Miyamoto, Zhihao Jin. Growth of flower-Like AlN by combustion synthesis assisted with mechanical activation [J]. Materials Science Forum, 2011, 695: 413~416.

 

2010 and Before

[113]        Hongyan Xia, Jiping Wang, Haiyun Jin, Zhongqi Shi, Guanjun Qiao. Fabrication and properties of reaction-formed SiC by infiltrating molten Si into mesocarbon microbeads-based carbon perform [J]. Materials Science and Engineering: A, 2010, 528 (1): 283~287.

[114]        Hongyan Xia, Jiping Wang, Guiwu Liu, Zhongqi Shi, Guanjun Qiao. Effect of nano-SiC on the sintering behavior and properties of calcined carbon derived from mesocarbon microbeads [J]. Journal of Nuclear Materials, 2010, 403 (1-3): 42~47.

[115]        史忠旗,金志浩,宫本钦生. 燃烧合成AlN粉体的放电等离子烧结及其导热性能[J]. 硅酸盐学报, 2010, 38(8): 1445~1449.

[116]        宮本欽生,史忠旗,桐原聡秀. 窒化アルミニウムセラミックスの一方向成長と高熱伝導フィラー材への応用[J]. 技術情報協会, 2010,4:1556. (日文)

[117]        Zhongqi Shi*, Mohamed Radwan, Soshu Kirihara, Yoshinari Miyamoto, Zhihao Jin. Enhanced thermal conductivity of polymer composites filled with three-dimensional brush-like AlN nanowhiskers [J]. Applied Physics Letters, 2009, 95 (22): 224104 (3 pages).

[118]        Zhongqi Shi*, Mohamed Radwan, Soshu Kirihara, Yoshinari Miyamoto, Zhihao Jin. Formation and evolution of quasi-aligned AlN nanowhiskers by combustion synthesis [J]. Journal of Alloys and Compounds, 2009, 476 (1-2): 360~365.

[119]        Zhongqi Shi*, Mohamed Radwan, Soshu Kirihara, Yoshinari Miyamoto, Zhihao Jin. Morphology-controlled synthesis of quasi-aligned AlN nanowhiskers by combustion method: effect of NH4Cl additive [J]. Ceramics International, 2009, 35 (7): 2727~2733.

[120]        Zhongqi Shi*, Jiping Wang, Guanjun Qiao, Jianfeng Yang, Zhihao Jin. Machinability, Deformation and cracks behavior of pressureless sintered Al2O3/h-BN composites: role of weak boundary phases [J]. Journal of Materials Science, 2009, 44 (6): 1580~1587.

[121]        Jiping Wang, Min Lin, Zhuo Xu, Yonghui Zhang, Zhongqi Shi, Junmin Qian, Guanjun Qiao and Zhihao Jin. Microstructure and mechanical properties of C/C–SiC composites fabricated by a rapid processing method [J]. Journal of the European Ceramic Society. 2009, 29 (14): 3091~3097.

[122]        Zhongqi Shi*, Jiping Wang, Guanjun Qiao, and Zhihao Jin. Effects of weak boundary phases (WBP) on the microstructure and mechanical properties of pressureless sintered Al2O3/h-BN machinable composites [J], Materials Science and Engineering: A, 2008,492 (1-2): 29~34.

[123]        Zhongqi Shi*, Mohamed Radwan, Soshu Kirihara, Yoshinari Miyamoto, Zhihao Jin. Combustion synthesis of rod-like AlN nanoparticles[J], Journal of the Ceramic Society of Japan, 2008, 116 (9): 975~979.

[124]        史忠旗,金志浩,乔冠军. 可加工陶瓷的弱界面结构与性能优化研究进展[J]. 硅酸盐学报, 2007, 35(s1): 131~136.