论文成果

当前位置：中文主页 - 科学研究 - 论文成果

史江海曹宏瑞.兰海,杨阳,杜明刚.The application of the improved local maximum iterative synchronizing transform in the diagnosis of mechanical faults , MEASUREMENT SCIENCE AND TECHNOLOGY
曹宏瑞.史江海,秦庆华.Nonlinear dynamics of rotor-support-casing system with support looseness fault , INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
曹宏瑞.史江海,杨阳,杜明刚.Dynamic modeling and vibration transmission analysis of the two-stage gearbox with simultaneous consideration of shaft flexibility and instantaneous gear meshing stiffness , MECHANICAL SYSTEMS AND SIGNAL PROCESSING
曹宏瑞.史江海,尉询楷,章立军.Atomic scale insights into the strengthening mechanism in 8Cr4Mo4V alloy with two-stage heat treatment , MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
史江海曹宏瑞.Influence of angular misalignment and triangular surface waviness on the performance of hybrid air journal bearings , INDUSTRIAL LUBRICATION AND TRIBOLOGY
曹宏瑞.史江海,杨阳,杜明刚.Extended influence coefficient method for meshing stiffness evaluation of spur gears considering rotor flexibility , MECHANICAL SYSTEMS AND SIGNAL PROCESSING
史江海曹宏瑞.高转速效应下空气静压主轴微铣削加工表面形貌预测研究 , 机械工程学报
史江海.曹宏瑞.磁-流-固多场耦合下空气静压主轴动力学建模及振动响应分析 , 机械科学与技术
曹宏瑞.Dynamic characteristics of angular contact ball bearings with mild defect on outer raceway , Engineering Failure Analysis
曹宏瑞.史江海,蔺肖曼,田维军,薛莹,乔社宁.Optimization of robot posture and spindle speed in robotic milling , ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING

共 45 条 1/5

加载更多