• 航空发动机叶端定时测量技术

• 航空发动机声学监测诊断技术

• 飞行器吊挂结构载荷识别技术

• 航空装备高端仪器国产化研制

1. Shuheng Zhao, Baijie Qiao*, Yanan Wang, Qiwen Cheng, Songlin Zhang, Ming Zhong, Zhibo Yang.CS-Based sensor placement optimization for blade tip timing using estimation-variance lower-bound and mutual-coherence criterion [J]. Aerospace Science and Technology, 113733, 2027.

2. 乔百杰, 周凯, 伏宇, 等. 航空发动机叶片叶端定时综述：测量、监测、诊断与评估[J]. 航空动力学报, 2026, 41（10）：20250250. (封面论文)

3. 陈雪峰, 郑琰挺, 赵舒恒, 程琦文, 杨志勃, 乔百杰*.航空发动机压气机叶片振动状态在线监测指标[J].振动工程学报,2026,39(6):1559-1569.

4. 周瑞,乔百杰*,王亚南,成玮,陈雪峰.基于非负稀疏编码算法展开网络的冲击载荷识别[J].机械工程学报,1-11.（网络首发）

5. 乔百杰,程琦文,许敬晖,钟明,范毅,陈雪峰*.变转速工况下叶端定时角域振动位移测量方法[J].振动、测试与诊断,1-8. （网络首发）

6. Rui Zhou, Baijie Qiao*, Liangliang Jiang, Wei Cheng, Boyi Wang, Yanan Wang, Xuefeng Chen. A joint optimization network for force identification on nonlinear structures [J].  Mechanical Systems and Signal Processing 260, 114934, 2026.

7.  Fei Wang, Baijie Qiao*, Ming Zhong, Yanan Wang, Yuanshi Liu, Xuefeng Chen. Experimental investigation of acoustic resonance in aero-engine compressors based on fluid–structure–acoustic multi-physics measurements[J]. Aerospace Science and Technology, 111915, 2026.

8. Songlin Zhang, Baijie Qiao*, Yuda Zhu, Bi Wen, Yu Fu, Shuheng Zhao, Weimin Geng, Yanan Wang, Xuefeng Chen. Velocity-based dual-blade tip timing for crack monitoring [J]. Aerospace Science and Technology, 112238, 2026.

9. Boyi Wang, Baijie Qiao*, Rui Zhou, Yanan Wang, Wei Cheng, Xuefeng Chen. A novel augmented Kalman filter with mixed norm constraint for impact force identification [J]. Mechanical Systems and Signal Processing 246, 113895, 2026.

10. Yunyang Ma, Baijie Qiao*, Yu Fu, Ming Zhong, Yanan Wang, Xuefeng Chen. Enhanced time-frequency representation of blade tip timing signals via group sparse modelling [J]. Mechanical Systems and Signal Processing 256, 114531, 2026.

11. Songlin Zhang, Baijie Qiao*, Denghui Li, Shuming Wu, Qixiu Cheng, Bi Wen, Ming Zhong, Xuefeng Chen. Fast enhanced MVDR for time-frequency analysis of blade tip timing [J]. Aerospace Science and Technology, 112941, 2026.

12. 王菲, 李行健, 王亚南, 杜军, 文璧, 乔百杰*, 陈雪峰. 基于稀疏贝叶斯的航空发动机风扇声模态重构 [J]. 航空动力学报 41 (5), 20250217, 2026.

13. Shuheng Zhao, Baijie Qiao*, Guojia Li, Zepeng Li, Ming Zhong, Songlin Zhang, Xuefeng Chen. CRLB-based optimal sensor layout for blade tip timing measurement [J]. Aerospace Science and Technology, 112121, 2026.

14. 朱昱达, 乔百杰*, 王亚南, 伏宇, 梁俊, 刘美茹, 文璧, 陈雪峰. 无转速参考的叶尖定时振动速度测量方法 [J]. 机械工程学报 62 (7), 255-268, 2026.

15. Kai Zhou, Yanan Wang, Baijie Qiao*, Junjiang Liu, Meiru Liu, Zhibo Yang, Xuefeng Chen. Non-convex sparse regularization via convex optimization for blade tip timing [J]. Mechanical Systems and Signal Processing 222, 111764, 2025.

16. Rui Zhou, Baijie Qiao*, Liangliang Jiang, Wei Cheng, Xiuyue Yang, Yanan Wang, Xuefeng Chen. A model-based deep learning approach to interpretable impact force localization and reconstruction [J]. Mechanical Systems and Signal Processing 224, 111977, 2025.

17. Chunyan Ao, Jinyuan Tian, Bi Wen, Baijie Qiao*, Meiru Liu, Frank Naets, Xuefeng Chen. Virtual sensing of blade strain distribution using tip-timing method [J]. International Journal of Mechanical Sciences 297, 110336, 2025.

18.  Jinghui Xu, Baijie Qiao*, Meiru Liu, Yanan Wang, Jiangbo Dai, Yi Fan, Xuefeng Chen. Time-frequency reassignment of blade tip timing signal [J]. Mechanical Systems and Signal Processing 224, 112163, 2025.

19. Kai Zhou, Yanan Wang, Baijie Qiao*, Yu Fu, Meiru Liu, Bi Wen, Zhibo Yang, Xuefeng Chen. Sparse-VMD coupled model for signal recovery and strain field prediction in blade tip timing [J]. Aerospace Science and Technology 165, 110528, 2025.

20.  Keyuan Li, Junjiang Liu, Zhibin Zhao, Bobing Ye, Baijie Qiao*, Xuefeng Chen. Reweighted periodic overlapping group lasso for impulsive feature extraction and its application to spiral bevel gear local fault diagnosis [J]. Mechanical Systems and Signal Processing 230, 112572, 2025.

21.  Guilong Li, Baijie Qiao*, Yu Fu, Meiru Liu, Yanan Wang, Zhibo Yang, Xuefeng Chen. An esprit-based dual-sensor method for monitoring blade vibration frequencies [J]. IEEE Transactions on Instrumentation and Measurement, 2025.

22. Yunyang Ma, Baijie Qiao*, Yu Fu, Jun Liang, Kai Zhou, Yanan Wang, Bi Wen, Xuefeng Chen. A novel time-frequency analysis method of blade tip timing signals based on multiple measurement vectors [J]. Mechanical Systems and Signal Processing 227, 112351, 2025.

23. Yunyang Ma, Baijie Qiao*, Jinghui Xu, Shuheng Zhao, Yu Fu, Jun Du, Weimin Geng, Xuefeng Chen. Bayesian time-frequency sparse representation of blade tip timing signals [J]. Aerospace Science and Technology, 110909, 2025.

24.  Keyuan Li, Baijie Qiao*, Yanan Wang, Heng Fang, Zhibin Zhao, Xuefeng Chen. Non-convex group sparse regularization method for local fault detection of spiral bevel gear [J]. Measurement 247, 116808, 2025.

25.  张松林, 乔百杰*, 王亚南, 梁俊, 耿卫民, 刘美茹, 文璧, 陈雪峰. 基于非接触测量的高速转子叶片裂纹故障监测 [J]. 航空动力学报 40 (12), 20240726, 2025.

26. 赵舒恒, 周凯, 耿卫民, 范兴超, 刘美茹, 乔百杰*, 陈雪峰. 基于叶尖定时的涡轮转子叶片动频辨识 [J]. 振动工程学报, 2025.

27. Keyuan Li, Heng Fang, Baijie Qiao*, Xuefeng Chen. Influence of time-varying excitation on vibration characteristics of the spiral bevel gear transmission system with pitting faults [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2025.

28. Keyuan Li, Yanan Wang, Baijie Qiao*, Zhibin Zhao, Xuefeng Chen. Periodical sparse-assisted decoupling method for local fault detection of spiral bevel gears [J]. Chinese Journal of Aeronautics, 103707, 2025.

29. 文璧, 李泽芃, 杜军, 王亚南, 刘元是, 乔百杰*, 陈雪峰. 航空发动机压气机管道声模态无偏稀疏重构方法 [J]. 推进技术 46 (4), 2407055, 2025.

30. 雷卓, 乔百杰*, 王亚南, 杜军, 梁俊, 刘元是, 伏宇, 陈雪峰. 基于 SPOQ 正则项的叶端定时信号稀疏重构 [J]. 机械工程学报 62 (7), 208-220, 2025.

31. Rui Zhou, Yanan Wang, Baijie Qiao*, Weidong Zhu, Junjiang Liu, Xuefeng Chen. Impact force identification on composite panels using fully overlapping group sparsity based on Lp-norm regularization [J]. Structural Health Monitoring 23 (1), 137-161, 2024.

32. Yuda Zhu, Yanan Wang, Baijie Qiao*, Meiru Liu, Xuefeng Chen. Blade tip timing for multi-mode identification based on the blade vibration velocity [J]. Mechanical Systems and Signal Processing 209, 111092, 2024.

33. Rui Zhou, Baijie Qiao*, Junjiang Liu, Wei Cheng, Xuefeng Chen. Impact force localization and reconstruction via gated temporal convolutional network [J]. Aerospace Science and Technology 144, 108819, 2024.

34. Yuda Zhu, Baijie Qiao*, Yanan Wang, Zhibo Yang, Meiru Liu, Xuefeng Chen. Improved non-contact vibration measurement via acceleration-based blade tip timing [J]. Aerospace Science and Technology 152, 109373, 2024.

35.  Jinghui Xu, Baijie Qiao*, Yanan Wang, Meiru Liu, Shunguo Fu, Yi Fan, Xuefeng Chen. A recursive calculation method of vibration displacements using blade tip timing in angular domain [J]. Mechanical Systems and Signal Processing 219, 111612, 2024.

36. Zepeng Li, Baijie Qiao*, Bi Wen, Xuefeng Chen, Andreas Jakobsson. Optimal microphone selection for aero-engine acoustic measurement [J]. Aerospace Science and Technology 148, 109079, 2024.

37. Zepeng Li, Baijie Qiao*, Bi Wen, Yuanshi Liu, Xuefeng Chen. Time analysis for aero-engine acoustic modes exploiting block sparsity [J]. Chinese Journal of Aeronautics 37 (11), 254-264, 2024.

38. Keyuan Li, Baijie Qiao*, Heng Fang, Xiuyue Yang, Xuefeng Chen. Time-varying mesh stiffness calculation and dynamic modeling of spiral bevel gear with spalling defects [J]. Journal of Dynamics, Monitoring and Diagnostics, 143-155, 2024.

39. 赵峻林, 乔百杰*, 罗现强, 符顺国, 程昊, 王亚南, 陈雪峰. 基于单传感器测量的多模态叶片动应力场预测 [J]. 机械工程学报 60 (16), 19-33, 2024.

40. Yanan Wang, Lin Chen, Jinxin Liu, Baijie Qiao*, Weifeng He, Xuefeng Chen. Impact force localization and reconstruction via ADMM-based sparse regularization method [J]. Chinese Journal of Mechanical Engineering 37 (1), 63, 2024.

41. Yuda Zhu, Baijie Qiao*, Meiru Liu, Yanan Wang, Jiangbo Dai, Xuefeng Chen. Non-contact high-frequency vibration measurement using blade tip vibration acceleration [C]. 2024 IEEE International Instrumentation and Measurement Technology, 2024.

42. 刘军江, 乔百杰*, 王亚南, 何卫峰, 陈雪峰. 基于空间-频域联合稀疏的复合材料结构冲击载荷识别 [J]. 机械工程学报 60 (11), 85-94, 2024.

43. Junjiang Liu, Baijie Qiao*, Yanan Wang, Weifeng He, Xuefeng Chen. Robust nonconvex sparse optimization for impact force identification [J]. International Journal of Computational Methods 21 (02), 2350027, 2024.

44. Yanan Wang, Lin Chen, Jinxin Liu, Baijie Qiao*, Zhu Mao, Xuefeng Chen. Accelerated generalized minimax-concave sparse regularization for impact force reconstruction and localization [J]. Journal of Low Frequency Noise, Vibration and Active Control 43 (1), 383-404, 2024.

45. Kai Zhou, Baijie Qiao*, Yanan Wang, Yu Fu, Jun Liang, Xuefeng Chen. Sparse reconstruction for blade tip timing based on projective minimax concave penalty [C]. 2024 International Conference on Sensing, Measurement & Data Analytics in, 2024.

46. 周凯, 乔百杰*, 刘美茹, 代江波, 卫靖澜, 陈雪峰. 基于参考键相动态追踪的无转速叶尖定时测量方法 [J]. 推进技术 45 (8), 226-235, 2024.

47. 李行健, 乔百杰*, 文璧, 李泽芃, 刘元是, 陈雪峰. 基于声学信息的航空发动机压气机旋转失速空间特征实验研究 [J]. 推进技术 45 (11), 228-238, 2024.

48. Keyuan Li, Baijie Qiao*, Zhibin Zhao, Yanan Wang, Heng Fang, Xuefeng Chen. A Nonconvex Periodic Group Sparse Regularization for Fault Diagnosis of Spiral Bevel Gear [C]. 2024 International Conference on Sensing, Measurement & Data Analytics in, 2024.

49. 陈林, 王亚南, 程昊, 刘军江, 乔百杰*, 陈雪峰. 基于空间稀疏先验的冲击载荷识别频域非凸稀疏正则化方法 [J]. 振动与冲击 43 (14), 148-155 and 188, 2024.

50. Jinghui Xu, Baijie Qiao*, Zhibo Yang, Meiru Liu, Jiangbo Dai, Xuefeng Chen. A Kalman filter-based method for displacement calculation of blade tip timing [C]. 2024 IEEE International Instrumentation and Measurement Technology, 2024.

51. Yanan Wang, Baijie Qiao*, Jinxin Liu, Junjiang Liu, Xuefeng Chen. lp-norm regularization for impact force identification from highly incomplete measurements [J]. Smart structures and systems 34 (2), 97-116, 2024.

52. Junjiang Liu, Baijie Qiao*, Yanan Wang, Weifeng He, Xuefeng Chen. Non-convex sparse regularization via convex optimization for impact force identification [J]. Mechanical Systems and Signal Processing 191, 110191, 2023.

53. Chunyan Ao, Baijie Qiao*, Meiru Liu, Weidong Zhu, Yuda Zhu, Yanan Wang, Xuefeng Chen. Non-contact full-field dynamic strain reconstruction of rotating blades under multi-mode vibration [J]. Mechanical Systems and Signal Processing 186, 109840, 2023.

54. Yanan Wang, Hao Wang, Keyuan Li, Baijie Qiao*, Zhonglei Shen, Xuefeng Chen. An analytical method to calculate the time-varying mesh stiffness of spiral bevel gears with cracks [J]. Mechanism and Machine Theory 188, 105399, 2023.

55. Kai Zhou, Baijie Qiao*, Meiru Liu, Weiqiang Gao, Jiangbo Dai, Xuefeng Chen. A novel OPR-free method for blade tip timing based on adaptive variable reference blades [J]. Aerospace Science and Technology 142, 108708, 2023.

56. Kai Zhou, Yanan Wang, Baijie Qiao*, Shunguo Fu, Xianqiang Luo, Xuefeng Chen. Single-sensor-based dynamic response reconstruction of blades under base excitation [J]. Mechanical Systems and Signal Processing 192, 110217, 2023.

57. Junjiang Liu, Baijie Qiao*, Yanan Wang, Weifeng He, Xuefeng Chen. Group sparsity extension of “Non-convex sparse regularization via convex optimization for impact force identification” [J]. Mechanical Systems and Signal Processing 201, 110661, 2023.

58. Yanan Wang, Keyuan Li, Baijie Qiao*, Zhonglei Shen, Xuefeng Chen. Theoretical investigation of mesh relationship and mesh stiffness of internal spur gears with tooth wear [J]. Applied Sciences 13 (3), 2022, 2023.

59. Yuda Zhu, Baijie Qiao*, Yanan Wang, Bo Pan, Lin Chen, Xuefeng Chen. A GMC-based accelerated algorithm for identifying the frequency and amplitude of multimode BTT signals [J]. IEEE Transactions on Instrumentation and Measurement 72, 1-11, 2023.

60. 李志国, 乔百杰*, 朱昱达, 周凯, 陈雪峰. 基于测点优化与模态扩展的机械结构振动响应全场重构 [J]. 振动与冲击 42 (9), 123-134, 2023.

61.  Chunyan Ao, Baijie Qiao*, Kai Zhou, Lin Chen, Shunguo Fu, Xuefeng Chen. Full-field dynamic strain reconstruction of an aero-engine blade from limited displacement responses [J]. Frontiers of Mechanical Engineering 18 (1), 15, 2023.

62. 刘军江, 乔百杰*, 王亚南, 何卫峰, 陈雪峰. 基于空间-频域联合稀疏先验的复合材料结构冲击载荷识别 [J]. 机械工程学报 60 (11), 85-94, 2023.

63. 文璧, 乔百杰*, 李泽芃, 李镇东, 王亚南, 陈雪峰. 基于声模态分解的风扇叶盘同步振动辨识 [J]. 航空学报 44 (6), 227066, 2023.

64. Yuda Zhu, Yanan Wang, Baijie Qiao*, Xianqiang Luo, Xuefeng Chen. Blade strain peak localization method with single transducer during multimode vibration [J]. Journal of Engineering for Gas Turbines and Power 145 (10), 101003, 2023.

65. 刘美茹, 郜伟强, 代江波, 刘佳蓬, 卫靖澜, 乔百杰*. 发动机涡轮转子叶片叶尖定时信号干扰与抑制 [J]. 航空动力学报 38 (8), 1826-1836, 2023.

66.  Junjiang Liu, Baijie Qiao*, Yuanchang Chen, Yuda Zhu, Weifeng He, Xuefeng Chen. Impact force reconstruction and localization using nonconvex overlapping group sparsity [J]. Mechanical Systems and Signal Processing 162, 107983, 2022.

67. Chunyan Ao, Baijie Qiao*, Lin Chen, Jinghui Xu, Meiru Liu, Xuefeng Chen. Blade dynamic strain non-intrusive measurement using L1/2-norm regularization and transmissibility [J]. Measurement 190, 110677, 2022.

68. Yuda Zhu, Yanan Wang, Baijie Qiao*, Shunguo Fu, Meiru Liu, Xianqiang Luo, Xuefeng Chen. Full-field dynamic strain reconstruction of rotor blades under multi-mode vibration [J]. Measurement 201, 111670, 2022.

69. Jinghui Xu, Baijie Qiao*, Meiru Liu, Shunguo Fu, Yu Sun, Xuefeng Chen. Blade tip timing for monitoring crack propagation of rotor blades using Block-AOLS [J]. Mechanical Systems and Signal Processing 181, 109498, 2022.

70. Zepeng Li, Yanan Wang, Baijie Qiao, Bi Wen, Xuefeng Chen. Experimental investigation of aeroelastic instabilities in an aeroengine fan: Using acoustic measurements [J]. Aerospace Science and Technology 130, 107927, 2022.

71.  Chunyan Ao, Baijie Qiao*, Meiru Liu, Shunguo Fu, Zhibo Yang, Xuefeng Chen. Dynamic strain reconstruction of rotating blades based on tip timing and response transmissibility [J]. Journal of Engineering for Gas Turbines and Power 144 (6), 061011, 2022.

72. Zepeng Li, Baijie Qiao*, Bi Wen, Junjiang Liu, Xuefeng Chen. Bi-regularization enhanced azimuthal mode analysis method for the aero-engine fan [J]. Mechanical Systems and Signal Processing 171, 108921, 2022.

73. 许敬晖, 乔百杰*, 刘美茹, 郜伟强, 陈雪峰. 基于叶端定时的转子叶片裂纹监测与诊断 [J]. 推进技术 43 (2), 368-376, 2022.(封面论文）

74. 刘美茹, 郜伟强, 范毅, 郭宇星, 焦江昆, 乔百杰*. 叶尖定时技术在转子叶片故障排除中的应用 [J]. 航空动力学报 37 (12), 2818-2829, 2022.

75. 陈林, 乔百杰*, 敖春燕, 符顺国, 刘美茹, 陈雪峰. 基于叶端定时的转子叶片动应变重构不确定性量化 [J]. 航空动力学报 37 (7), 1456-1468, 2022.

76. Jinghui Xu, Baijie Qiao*, Junjiang Liu, Chunyan Ao, Guangrong Teng, Xuefeng Chen. Sparse reconstruction for blade tip timing signal using generalized minimax-concave penalty [J]. Mechanical Systems and Signal Processing 161, 107961, 2021.

77.  Jinghui Xu, Baijie Qiao*, Meiru Liu, Zhibo Yang, Xuefeng Chen. Crack propagation monitoring of rotor blades using synchroextracting transform [J]. Journal of Sound and Vibration 509, 116253, 2021.

78. Zepeng Li, Baijie Qiao*, Bi Wen, Yanan Wang, Xuefeng Chen. Acoustic mode measuring approach developed on generalized minimax-concave regularization and Tikhonov regularization [J]. IEEE Transactions on Instrumentation and Measurement 71, 1-11, 2021.

79. Zepeng Li, Baijie Qiao*, Bi Wen, Zepeng Li, Xuefeng Chen. Reweighted generalized minimax-concave sparse regularization for duct acoustic mode detection with adaptive threshold [J]. Journal of Sound and Vibration 506, 116165, 2021.

80. 李泽芃, 乔百杰*, 文璧, 陈雪峰. 基于压缩感知的多级风扇周向声模态重构 [J]. 航空动力学报 36 (7), 1388-1397, 2021.

81. 李泽芃, 乔百杰*, 文璧, 陈雪峰. 基于声阵列信号的风扇喘振先兆特征识别 [J]. 航空动力学报 36 (5), 923-934, 2021.

82. 朱昱达, 乔百杰*, 符顺国, 敖春燕, 陈雪峰. 基于响应传递比的转子叶片动应变重构 [J]. 航空动力学报 36 (8), 1690-1701, 2021.

83. Baijie Qiao, Chunyan Ao, Zhu Mao, Xuefeng Chen. Non-convex sparse regularization for impact force identification [J]. Journal of Sound and Vibration 477, 115311, 2020.

84. Junjiang Liu, Baijie Qiao*, Weifeng He, Zhibo Yang, Xuefeng Chen. Impact force identification via sparse regularization with generalized minimax-concave penalty [J]. Journal of Sound and Vibration 484, 115530, 2020.

85. 敖春燕, 乔百杰*, 刘美茹, 孙瑜, 陈雪峰. 基于非接触式测量的旋转叶片动应变重构方法 [J]. 航空动力学报 35 (3), 569-580, 2020.

86. 刘美茹, 滕光蓉, 肖潇, 张振, 乔百杰*, 陈雪峰. 基于叶尖定时的航空发动机涡轮叶片振动测量 [J]. 航空动力学报 35 (9), 1954-1963, 2020.

87. Baijie Qiao, Zhu Mao, Hao Sun, Shuang Chen, Xuefeng Chen. Sparse reconstruction of guided wavefield from limited measurements using compressed sensing [J]. Smart Structures and Systems 25 (3), 369-384, 2020.

88. 刘美茹, 朱靖, 滕光蓉, 肖潇, 乔百杰*, 陈雪峰. 涡轮转子叶片非接触振动测试试验研究 [J]. 振动工程学报 33 (6), 2020.

89. 许敬晖, 乔百杰*, 滕光蓉, 杨志勃, 陈雪峰. 基于压缩感知的叶端定时信号参数辨识方法 [J]. 航空学报 42 (5), 524229-524229, 2020.

90. 刘美茹, 朱靖, 梁尔, 滕光蓉, 肖潇, 乔百杰*. 基于叶尖定时的航空发动机压气机叶片振动测量 [J]. 航空动力学报 34 (9), 1895-1904, 2019.

91. 乔百杰*, 陈雪峰, 刘金鑫, 王诗彬. 机械结构冲击载荷稀疏识别方法研究 [J]. 机械工程学报 55 (3), 81-89, 2019.

92. Baijie Qiao, Junjiang Liu, Junjiang Liu, Zhibo Yang, Xuefeng Chen. An enhanced sparse regularization method for impact force identification [J]. Mechanical Systems and Signal Processing 126, 341-367, 2019.

93. Baijie Qiao, Zhu Mao, Junjiang Liu, Zhibin Zhao, Xuefeng Chen. Group sparse regularization for impact force identification in time domain [J]. Journal of Sound and Vibration 445, 44-63, 2019.

94.  Baijie Qiao, Xingwu Zhang, Jiawei Gao, Ruonan Liu, Xuefeng Chen. Sparse deconvolution for the large-scale ill-posed inverse problem of impact force reconstruction [J]. Mechanical Systems and Signal Processing 83, 93-115, 2017.

95. Baijie Qiao, Xingwu Zhang, Chenxi Wang, Hao Zhang, Xuefeng Chen. Sparse regularization for force identification using dictionaries [J]. Journal of Sound and Vibration 368, 71-86, 2016.

96. Baijie Qiao, Xingwu Zhang, Jiawei Gao, Xuefeng Chen. Impact-force sparse reconstruction from highly incomplete and inaccurate measurements [J]. Journal of Sound and Vibration 376, 72-94, 2016.

97. Baijie Qiao, Tong Zhao, Xuefeng Chen, Jinxin Liu. The assessment of active vibration isolation performance of rotating machinery using power flow and vibrational energy: experimental investigation [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of, 2016.

98. Baijie Qiao, Xuefeng Chen, Xiaofeng Xue, Xianqiang Luo, Ruonan Liu. The application of cubic B-spline collocation method in impact force identification [J]. Mechanical Systems and Signal Processing 64, 413-427, 2015.

99.  Baijie Qiao, Xingwu Zhang, Xianqiang Luo, Xuefeng Chen. A force identification method using cubic B-spline scaling functions [J]. Journal of Sound and Vibration 337, 28-44, 2015.

100.  Baijie Qiao, Xuefeng Chen, Xianqiang Luo, Xiaofeng Xue. A novel method for force identification based on the discrete cosine transform [J]. Journal of Vibration and Acoustics 137 (5), 051012, 2015.

101. 乔百杰, 赵彤, 陈雪峰. 功率流测量以及振动能量参数估计试验研究 [J]. 振动与冲击 33 (7), 2014.

  主要授权发明专利

1. 乔百杰, 陈雪峰, 曹宏瑞, 杨志勃, 孙瑜. 基于模态振型的叶片位移应变测量方法[P]. （ZL2019102258788） 

2. 乔百杰, 陈雪峰, 何卫锋,何卫锋, 杨志勃,刘金鑫. 一种旋转叶片非接触式位移场测量方法及其系统[P]. （ZL2019102267664）

3. 乔百杰; 雷卓; 伏宇; 王亚南; 刘美茹; 滕光蓉; 刘金鑫; 杨志勃; 陈雪峰. 无键相变转速叶尖定时位移测量方法、系统、介质及设备[P].202510302796.4

4. 乔百杰; 赵文辉; 王亚南; 杨志勃; 陈雪峰. 西安交通大学.航空发动机涡轮叶片高频振动叶尖定时监测方法及系统[P]:ZL202310791188.5 .2026-06-19.

5. 乔百杰, 许敬晖, 刘美茹, 曹宏瑞, 杨志勃, 陈雪峰. 一种旋转叶片叶端定时振动参数辨识方法与系统[P]. （ZL2019107157143）

6. 乔百杰; 赵文辉; 王亚南; 杨志勃; 陈雪峰. 西安交通大学.航空发动机涡轮叶片高频振动叶尖定时监测方法及系统[P].（ZL202310791188.5）

7. 乔百杰, 许敬晖, 陈雪峰, 刘军江, 李浩琪, 田绍华. 转子叶片多模态振动激励装置及其激励方法[P]. （ZL2019103424588）

8. 乔百杰, 许敬晖, 陈雪峰,杨志勃, 翟智.  用于辨识叶片多模态振动的叶端定时传感器的布置方法[P]. （ZL2019102267683）

9. 乔百杰, 许敬晖, 敖春燕, 曹宏瑞, 陈雪峰. 基于数字孪生的转子叶片健康监测方法和监测系统[P]. ZL2020107213964

10. 乔百杰, 周凯, 敖春燕, 杨志勃, 陈雪峰.  一种基于位移-应变传递比的转子叶片裂纹损伤识别方法[P]. ZL2020112271480

11. 乔百杰,周凯, 陈雷, 曹宏瑞, 陈雪峰. 基于叶端位移-位移传递比的转子叶片裂纹损伤识别方法[P]. ZL2020112267860

12. 乔百杰, 周凯, 朱昱达, 符顺国, 陈雪峰.  一种基于应变-应变传递比的转子叶片裂纹损伤识别方法[P]. ZL2020112271495

13. 乔百杰, 孙瑜, 何卫锋, 陈雪峰, 曹宏瑞. 一种旋转叶片动应变场测量方法及其系统[P]. （ZL2019102255440）

14. 乔百杰, 敖春燕, 陈雪峰, 曹宏瑞, 孙瑜. 一种旋转叶片非接触式动应变场测量方法及其系统[P]. （ZL2019102267679）

15. 乔百杰, 敖春燕, 陈雪峰, 杨志勃, 田绍华. 一种叶片动应变测量的传感器布置方法[P]. （ZL2019102258769）

16. 乔百杰, 翟智, 刘金鑫, 曹宏瑞, 陈雪峰.一种基于叶端定时的转子叶片位移场测量方法及其系统[P]. （ZL2019102268987）

17. 乔百杰, 翟智, 陈雪峰, 田绍华, 吴淑明. 基于模态解耦的叶片动应变场与位移场重构方法及其系统[P]. （ZL2019102255455）

18. 乔百杰, 杨志勃,陈雪峰,田绍华，杨来浩.一种旋转叶片位移场反演重构方法及其系统[P]. （ZL2019102258773）

19. 乔百杰, 朱昱达, 符顺国, 曹宏瑞, 陈雪峰. 一种转子叶片的应变片测点布局优化方法[P]. ZL2020103699935.

20. 乔百杰, 赵峻林, 罗现强, 王亚南, 朱昱达, 陈雪峰. 基于非接触测量的叶片多模态最大应力预测方法及系统[P]. ZL2022106286242.

21. 乔百杰，朱昱达，符顺国，曹宏瑞，陈雪峰.一种转子叶片动应变测量数据一致性评估方法[P].（ZL202011368213.1）

22. 乔百杰,敖春燕,许敬晖,曹宏瑞,陈雪峰.基于数字孪生的转子叶片寿命预测方法和预测系统[P].（ZL202010722183 .3）

23. 乔百杰,郭宇星,朱昱达,潘渤,杨青,范璐骏,张硕杰,陈雪峰. 基于脉冲序列生成的非接触式测量的校核方法与系统[P].（ZL2022106271637）

24. 乔百杰,朱昱达, 潘渤, 郭宇星, 杨青,陈雪峰. 基于数字模拟器的叶端定时系统校核方法及校核系统[P].（ZL2022106286223）

25. 乔百杰, 朱昱达, 罗现强, 符顺国, 赵峻林, 陈雪峰. 单传感器转子叶片多模态应变场重构方法及测量系统[P].（2022106286238）.

26. 乔百杰，朱昱达，代江波，刘美茹，钟华贵，王亚南，陈雪峰. 基于叶尖速度的多模态叶端定时测量方法以及系统[P]. ZL2023108153517.

27. 乔百杰,朱昱达,王亚南,杨志勃,曹宏瑞,陈雪峰. 转子叶片全频域振动叶端定时测量方法以及系统[P]. ZL2023107968510.

28. 乔百杰,朱昱达,钟华贵,刘美茹,王亚南,陈雪峰. 基于叶尖加速度的叶端定时高阶振动辨识方法以及系统[P].ZL2023108355186.

29. 乔百杰,周凯,王亚南,杨志勃,陈雪峰. 基于动态变参考叶片的无转速叶尖定时测量方法[P].ZL2023111957627.

30. 乔百杰; 赵睿; 文璧; 李泽芃; 王亚南; 成玮; 刘金鑫; 陈雪峰. 航发压气机旋转失速声纹监测方法、系统、介质及设备[P].202510387115.9

31. 乔百杰,李镇东,王亚南,文璧,陈雪峰. 半阈值迭代收缩的航空发动机风扇声模态检测方法及系统[P]. ZL2021116504427.

32. 乔百杰; 王菲; 王亚南; 梁俊; 李行健; 伏宇; 钟明; 成玮; 陈雪峰. 声振协同的压气机声共振监测方法、系统、介质及设备[P].202510372745.9.

33. 乔百杰; 王菲; 王亚南; 李行健; 文璧; 李泽芃; 王奕朦; 刘金鑫; 陈雪峰. 航发压气机声共振声学诊断方法、系统、介质及设备[P].202510372720.9.

34. 乔百杰; 贾思腾; 刘元是; 王亚南; 杜军; 李行健; 钟明; 伏宇; 陈雪峰. 航发风扇叶片掉角故障声学诊断方法、系统、介质及设备[P]. 202510379794.5.

35. 乔百杰; 贾思腾; 杜军; 赵睿; 刘元是; 王亚南; 伏宇; 成玮; 陈雪峰. 航发压气机旋转不稳定声纹辨识方法、系统、介质及设备:[P].202510379805.X.

36. 乔百杰; 马云阳; 伏宇; 梁俊; 王亚南; 刘美茹; 钟明; 杨志勃; 陈雪峰. 基于多测量向量的叶端定时时频非凸压缩感知方法及系统[P].202411340673.1.

37. 乔百杰,李行健,王亚南,杜军,刘元是,钟明,伏宇,成玮,陈雪峰.基于多测量贝叶斯压缩感知的风扇声模态分解方法及系统[P]. 2024112223108. 

38. 乔百杰, 严如强, 张兴武, 陈雪峰. 一种机械结构冲击载荷识别的稀疏解卷积方法[P]. (ZL201610222057.5)

39. 乔百杰, 刘军江, 陈雪峰,杨志勃,何卫锋. 基于迭代加权稀疏的复合材料结构冲击载荷识别方法及装置[P]. (ZL2019101523409)

40. 乔百杰, 翟智, 陈雪峰,刘金鑫，田绍华.  一种基于群稀疏的复合材料结构冲击载荷识别方法及装置[P]. (ZL201910154561X)

41. 乔百杰, 刘军江, 何卫锋, 刘金鑫, 杨志勃, 陈雪峰. 基于广义最小最大凹惩罚项的冲击载荷识别方法及装置[P]. ZL202010465955X.

42. 乔百杰, 沈智宪, 罗巍, 刘军江, 陈雪峰,曹宏瑞. 一种基于齿轮内源激励力的齿轮振源识别方法. ZL2020106717687

43. 乔百杰,李克源,王亚南,沈智宪,陈雪峰.含裂纹故障的弧齿锥齿轮振动响应分析方法[P].（ZL202210436118.3）

44. 乔百杰,冯长江,沈智宪,王亚南,曹宏瑞,陈雪峰. 基于残余传递误差的弧齿锥齿轮故障内源激励识别方法[P].（ZL202210433146X）

45. 乔百杰,陈雪峰,杨志勃,刘金鑫,张兴武. 基于增强稀疏的复合材料结构冲击载荷识别方法及装置[P].（ZL2019101532588）

46. 乔百杰, 汪浩, 王亚南, 沈智宪, 陈雪峰. 含点蚀故障的弧齿锥齿轮振动响应分析方法. ZL202210442861X.

47. 乔百杰; 李泽芃; 文璧; 王亚南; 陈雪峰. 基于Lp范数正则化的航空发动机周向声模态测量方法[P]. 2021116504431

48. 王亚南; 李志国; 乔百杰; 曹宏瑞; 陈雪峰. 基于结构加速度响应全场重构的齿轮箱故障检测方法[P]. 2022109468774 

49. 王亚南, 汪浩, 乔百杰, 沈智宪, 陈雪峰. 含剥落故障的弧齿锥齿轮振动响应分析方法. ZL2022104331474.

50. 沈智宪, 李克源, 乔百杰, 王亚南, 陈雪峰. 基于切片法的弧齿锥齿轮啮合刚度计算方法. ZL2022104332759.

51. 王亚南, 冯长江, 乔百杰, 沈智宪, 曹宏瑞, 陈雪峰. 一种基于传递误差的弧齿锥齿轮内源激励识别方法. ZL2022104363530.

52. 陈雪峰, 乔百杰, 张兴武, 杨志勃, 翟智. 一种风机叶片的冲击载荷识别方法[P]. (ZL201510005411.4)

53. 陈雪峰, 乔百杰, 严如强, 张兴武. 一种机械结构多源冲击载荷识别的压缩感知方法[P]. (ZL201610221389.1)

54. 严如强, 乔百杰, 张兴武, 陈雪峰. 一种机械结构动载荷识别的稀疏表征方法[P]. (ZL201610221390.4)

55. Baijie Qiao, Xuefeng Chen, Chunyan Ao, Weifeng He, Laihao Yang. Dynamic strain field measuring method and system for rotor blade based on blade tip timing.  PCT-CN2020-080638, US 17325208 （授权美国专利）

56. Baijie Qiao, Chunyan Ao, Xuefeng Chen, Hongrui Cao, Yu Sun. Non-contact dynamic strain field measuring method and system for rotating blade. PCT-CN2020-080644. US012007309B2 （授权美国专利）

57. Baijie Qiao, Xuefeng Chen, Chunyan Ao, Weifeng He, Laihao Yang. Dynamic strain field measuring method and system for rotor blade based on blade tip timing.  PCT-CN2020-080638. GB2594588. （授权英国专利）

58. Baijie Qiao, Chunyan Ao, Xuefeng Chen, Hongrui Cao, Yu Sun. Non-contact dynamic strain field measuring method and system for rotating blade. PCT-CN2020-080644.  GB2592775 （授权英国专利）

软件著作权

1. 叶端定时传感器布局优化软件，登记号： 2021SR1066740

2. 基于ANSYS的叶片有限元分析，登记号： 2021SR1066739

3. 叶端定时及应变片数字信号处理软件 ，登记号：2021SR1066786

4. 基于叶端定时的叶片动应变重构软件，登记号： 2021SR1066787 

5.叶端定时数字模拟器软件，登记号：2022SR0678193

6.叶片动应力评估软件，登记号：2022SR0678194

7.叶片多模态振动仿真分析软件，登记号：2022SR0678195

8. 尾传动系统内源激励识别软件，登记号：2024SR0511035

9. 基于机器学习的载荷逆向识别软件，登记号：2024SR1457150

10. 航空发动机风扇宽频声模态分解软件，登记号：2024SR1708130

11. 结构全场动应变重构软件. 登记号：2025SR0755574

12. 叶端定时位移测量修正软件. 登记号：2025SR0162617

13. 用于载荷逆向识别的试验测点布置软件. 登记号：2025SR0436745