国际学术论文 Research Articles

1. M. Shen, C. Kang*, and F. Fang*, "Material removal characteristics of various surface features on selective laser melted 316L stainless steel during electropolishing," Journal of Manufacturing Processes, vol. 79, pp. 639-653, 2022.
2. C. Kang, F. Liang, G. Shen, D. Wu, and F. Fang, "Study of micro-dimples fabricated on alumina-based ceramics using micro-abrasive jet machining," Journal of Materials Processing Technology, vol. 297, p. 117181, 2021.
3. F. Liang, C. Kang*, and F. Fang*, "Tool path planning on triangular mesh surfaces based on the shortest boundary path graph," International Journal of Production Research, pp. 1-20, 2021.
4. F. Liang, C. Kang*, and F. Fang*, "A smooth tool path planning method on NURBS surface based on the shortest boundary geodesic map," Journal of Manufacturing Processes, vol. 58, pp. 646-658, 2020.
5. C. Kang and F.-Z. Fang, "State of the art of bioimplants manufacturing: part I," Advances in Manufacturing, vol. 6, no. 1, pp. 20-40, 2018.
6. C. Kang and F.-Z. Fang, "State of the art of bioimplants manufacturing: part II," Advances in Manufacturing, vol. 6, no. 2, pp. 137-154, 2018.
7. C. Kang and H. Huang, "A comparative study of conventional and high speed grinding characteristics of a thin film multilayer structure," Precision Engineering, vol. 50, pp. 222-234, 2017.
8. C. Kang and H. Huang, "Deformation, failure and removal mechanisms of thin film structures in abrasive machining," Advances in Manufacturing, vol. 5, no. 1, pp. 1-19, 2017.
9. C. Kang and H. Huang, "Mechanical load-induced interfacial failure of a thin film multilayer in nanoscratching and diamond lapping," Journal of Materials Processing Technology, vol. 229, pp. 528-540, 2016.
10. C. Kang and H. Huang, "Deformation and Removal Characteristics of Multilayered Thin Film Structures in Nanoscratching and Diamond Lapping," in Advanced Materials Research, 2014, vol. 1017: Trans Tech Publ, pp. 61-65.
11. C. Kang, B. J. Hao, and H. Huang, "A Preliminary Study of Surface Integrity and Wheel Wear in the Grinding of Multilayered Thin Film Structures," in Advanced Materials Research, 2014, vol. 1017: Trans Tech Publ, pp. 88-91.
12. C. Kang and H. Huang, "A Study of Mechanical Properties and Material Removal of Polycrystalline Tungsten via Nanoindentation and Nanoscratch," in Advanced Materials Research, 2013, vol. 797: Trans Tech Publ, pp. 706-710.
13. C. Kang and H. Huang, "FEM Stress Analysis of Interfacial Failure of Multilayered Thin Film Structures in Nanoscratching," in Advanced Materials Research, 2016, vol. 1136: Trans Tech Publ, pp. 289-292.
14. F. Liang, C. Kang, Z. Lu, and F. Fang, "Iso-scallop tool path planning for triangular mesh surfaces in multi-axis machining," Robotics and Computer-Integrated Manufacturing, vol. 72, p. 102206, 2021.
15. F. Liang, C. Kang, and F. Fang, "A review on tool orientation planning in multi-axis machining," International Journal of Production Research, vol. 59, no. 18, pp. 5690-5720, 2021.
16. D. Wu, C. Kang, F. Liang, G. Yan, and F. Fang, "Diffractive optical characteristics of nanometric surface topography generated by diamond turning," Journal of Manufacturing Processes, vol. 67, pp. 23-34, 2021.
17. G. Shen, J. Zhang, C. Kang, and F. Fang, "Study on surface texture patterns for improving tribological performance of bioimplants," Surface and Coatings Technology, vol. 422, p. 127567, 2021.
18. D. Wu, F. Liang, C. Kang, and F. Fang, "Performance Analysis of Surface Reconstruction Algorithms in Vertical Scanning Interferometry Based on Coherence Envelope Detection," Micromachines, vol. 12, no. 2, p. 164, 2021.
19. L. O’Toole, C. Kang, and F.-Z. Fang, "Precision micro-milling process: state of the art," Advances in Manufacturing, vol. 9, no. 2, pp. 173-205, 2021.
20. B. Liu, C. Kang, and F. Fang, "Biometric Measurement of Anterior Segment: A Review," Sensors, vol. 20, no. 15, p. 4285, 2020.
21. L. O’Toole, C. Kang, and F. Fang, "Advances in Rotary Ultrasonic-Assisted Machining," Nanomanufacturing and Metrology, pp. 1-25, 2019.
22. R. Melentiev, C. Kang, G. Shen, and F. Fang, "Study on surface roughness generated by micro-blasting on Co-Cr-Mo bio-implant," Wear, vol. 428, pp. 111-126, 2019.
23. C. Kang, F. Fang, Deformation characteristics under Vickers indentation in CoCr and 316LVM stainless steel-based biomaterials, 6th International Conference on Nanomanufacturing, 2018, Brunel, U.K.
24. G. Shen, F. Fang, and C. Kang, "Tribological performance of bioimplants: A comprehensive review," Nanotechnology and Precision Engineering, vol. 1, no. 2, pp. 107-122, 2018.
25. C. Mao, X. Sun, H. Huang, C. Kang, M. Zhang, and Y. Wu, "Characteristics and removal mechanism in laser cutting of cBN–WC–10Co composites," Journal of Materials Processing Technology, vol. 230, pp. 42-49, 2016.
26. X. Li, M. Roberts, Y. Liu, C. Kang, H. Huang, and T. Sercombe, "Effect of substrate temperature on the interface bond between support and substrate during selective laser melting of Al–Ni–Y–Co–La metallic glass," Materials & Design (1980-2015), vol. 65, pp. 1-6, 2015.
27. X. Li, C. Kang, H. Huang, and T. Sercombe, "The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting," Materials & Design, vol. 63, pp. 407-411, 2014.
28. X. Li, C. Kang, H. Huang, L. Zhang, and T. B. Sercombe, "Selective laser melting of an Al86Ni6Y4. 5Co2La1. 5 metallic glass: Processing, microstructure evolution and mechanical properties," Materials Science and Engineering: A, vol. 606, pp. 370-379, 2014.
29. Z. G. Dong, C. Kang, and L. Xu, "Precision Honing of Stainless Steel Valve Core," in Key Engineering Materials, 2011, vol. 487: Trans Tech Publ, pp. 438-442.
30. Z. G. Dong and C. Kang, "Study on Deformation and Damage of Single Crystal MgO by Micro-Scratch," in Advanced Materials Research, 2010, vol. 126: Trans Tech Publ, pp. 940-945.
31. H. Huang et al., "Machining Characteristics of Multilayered Thin Film Solar Panels in Diamond Wire Sawing and Grinding," in Advanced Materials Research, 2013, vol. 797: Trans Tech Publ, pp. 85-89.
32. L. O’Toole, E. Ahearne, G. Byrne, C. Kang, F. Fang, Feasibility study on rotary ultrasonic machining of cobalt-chrome alloy and associated tool wear observations, Annual meeting of Machine Tool Technologies Research Foundation (MTTRF), 2019, San Francisco.

英文专刊

Jiang Guo, Chunjin Wang and Chengwei Kang, Frontiers in Ultra-Precision Machining, vol. 13, ed: MDPI, 2022

This book is a reprint of the Special Issue Frontiers in Ultra-Precision Machining that was published in Micromachines