出版物

没有找到条目。
出版物 作者 出版日期 出版社
Microstructural investigation of downward directionally solidified single crystal superalloys F Wang 2015-03-12 Shaker Verlag, Germany

论文期刊

没有找到条目。
论文标题 作者 发表/完成日期 期刊名称
Processability and wide-temperature-range properties of MoS2/PEEK self-lubricating composites manufactured by laser powder bed fusion process Yazhou Li, Qiang Yang, Lingyun Jian, Qianyuan Wang, Fu Wang, Xiaolong Wang, Rui Guo, Qunfeng Zeng, Dichen Li 2025-11-20 Virtual and Physical Prototyping
A preferred method to prepare a single crystal blade by a downward directional solidification Yang Liu,Yan Shang,Fu Wang, Qiang Yang, Jiantao Wu 2025-02-25 Journal of Alloys and Compounds
A novel model of the cross-section variation effect induced by contraction convection on freckle defects in directional solidification Yang Liu, Yan Shang, Fu Wang, Dexin Ma, Qiang Yang,Xiaorui Chen,Jiantao Wu 2025-01-14 Journal of Materials Research and Technology
Designing model for adaptive variable withdrawal rate strategies to control misaligned grains during directional solidification of large-sized complex-shaped turbine blades Yang Liu, Fu Wang,Jing Wang, Qiang Yang, Dichen Li, Jiantao Wu 2024-12-19 Journal of Materials Research and Technology
Microscale stray grains formation in single-crystal turbine blades of Ni-based superalloys Fu Wang, Yang Liu, Qiang Yang, Dexin Ma, Dichen Li 2024-08-20 Journal of Materials Science & Technology
Freckle prediction model incorporating geometrical effects for Ni-based single-crystal superalloy components Yang Liu, Fu Wang, Dexin Ma, Qiang Yang, Weitai Xu, Yunxing Zhao, Hongbiao Dong, Yong Liu, Dichen Li 2024-03-01 Acta Materialia
A novel prediction model of the freckle defects for single-crystal superalloy blades Yang Liu, Fu Wang 2024-01-26 Journal of Physics: Conference Series
Fabrication and posttreatment for inorganic binder jetting sand molds for casting Fu Wang, Xiaohan Cui, Qiang Yang, Haiyang Song, Dichen Li 2023-07-10 Additive Manufacturing
Chemical and Wetting Analysis of the Ni-Ti Coating on SiC Improved by a 2-Step Coating-Sintering Process Yang Liu,Ying-Xin Wang,Qiang Yang, Fu Wang 2020-11-19 Materials
Effect of Ru on macro-/micro-structure evolution within platform of Ni-based superalloy single crystal blades Xu W, Wang F, Ma D, et al. 2020-03-15 Journal of Alloys and Compounds
Dimensional Tolerance of Casting in The Bridgman Furnace Based on 3D Printing Techniques Xintao Zhu， Fu Wang， Dexin Ma， Andreas Bührig-Polaczek 2020-02-25 Metals
2-D Selector Simulation Studies on Grain Selection for Single Crystal Superalloy of CM247LC Zhang H, Zhu X, Wang F, et al. 2019-10-21 Materials
Co-growing mechanism of γ/γ′ eutectic on MC-type carbide in Ni-based single crystal superalloys Wang, F., Xu, W., Ma, D., Bührig-Polaczek, A. 2019-07-05 Journal of Alloys & Compounds
Using a Three-Dimensional Reduction Method in the High-Efficiency Grain Selector and Corresponding Grain Selection Mechanism Zhu X, Wang F, Zhang S，Wittenzellner, T., Frieß, J., Ma, D., & Bührig-Polaczek, 2019-06-01 Materials
Investigation of Start Block and Corresponding Influence for Grain Selection during Casting of Single-Crystal Superalloys Zhu, X., Wang, F., Wittenzellner, T., Zhang, S., Hemes, S., Mathes, M., Bü 2019-05-27 Materials
Single Crystal Castability and Undercoolability of PWA1483 Superalloy DX Ma, F Wang, JZ Guo, WL Xu 2019-04-06 Acta Metallurgica Sinica (English Letters)
Grain selection in a high-efficiency 2D grain selector during casting of single-crystal superalloys Zhu, X., Wang, F., Ma, D., & Bührig-Polaczek, A. 2019-03-07 Materials
Development of a high-efficiency z-form selector for single crystal blades and corresponding grain selection mechanism Zhu X, Wang F, Ma D，Bührig-Polaczek, A 2019-03-07 Materials
Effect of Ceramic Cores on the Freckle Formation During Casting Ni-Based Single Crystal Superalloys F. Wang，D. Ma, A. Bührig-Polaczek 2018-12-03 Metallurgical and Materials Transactions A
CM247LC单晶高温合金中MC碳化物对γ/γ′共晶反应的影响 马德新，王富，温序晖，孙德建，刘林 2017-06-17 金属学报
20条目 每页

显示38结果中的1-20。

专利

没有找到条目。
专利名称 申请号 专利类型 申请日期
一种基于激光粉末床熔融成形锆基非晶合金复杂构件的方法 202411843767.0 发明 2024.12.14
一种基于多物理场耦合的激光粉末床熔融预热温度场仿真方法 202410821244.X 发明 2024.06.24
一种基于多材料光固化 3D 打印精准润滑构件的方法 202410787265.4 发明 2024.06.18
一种基于激光粉末床熔融的非晶合金微波天线及其制造方法和应用 202311783452.7 发明 2023.12.22
一种 PEEK 基自润滑复合材料制件及其成形方法 202311634007.4 发明 2023.11.30
一种高温合金定向凝固装置及凝固方法 202110679666.4 发明 2021.06.18
一种金属的定向凝固装置及凝固方法 202110679676.8 发明 2021.06.18
一种适用于陶瓷/金属连接的陶瓷结合区表面改性方法 202011340311.4 发明 2020.11.25
一种面向SiC/高温合金一体化构件的强韧化碳化硅陶瓷基体及其制备方法 201911223363.0 发明 2019.12.03
一种碳化硅陶瓷-镍基合金复合材料零件及其制备方法 201910817692.1 发明 2019.08.30
一种易于脱芯的砂芯结构 201910168444.9 发明 2019.03.06
一种基于3DP技术的铁铝合金零件的制备方法 201911289159.9 发明 2019.02.13
20条目 每页

显示12结果中的1-12。