17） B Yue, Y Xu, X Teng, Y Zhou, L He, S Ma, X Hui, W Zhang. A novel thermal-fluid topology optimization of the frame mold for composite autoclave process[J]. Applied Thermal Engineering, 2024.

16） X Hui, Y Xu, J Niu, W Zhang. Rapid evaluation and prediction of cure-induced residual stress of composites based on cGAN deep learning model[J]. Composite Structures, 2023.

15） X Teng, Y Xu, W Zhang, X Hui, W Liu, C Ma. Improving Mode II delamination resistance of curved CFRP laminates by a pre-hole Z-pinning (PHZ) process[J]. Chinese Journal of Aeronautics, 2023.

14） X Hui, Y Xu, W Zhang, W Zhang. Multiscale collaborative optimization for the thermochemical and thermomechanical cure process during composite manufacture[J]. Composites Science and Technology, 2022.

13） X Hui, Y Xu, W Zhang, W Zhang. Cure process evaluation of CFRP composites via neural network: From cure kinetics to thermochemical coupling[J]. Composite Structures, 2022.

12） X Teng, Y Xu, X Hui, W Zhang, H Dai, W Liu, C Ma, Y Li. Experimental study on the low-velocity impact and post-impact flexural properties of curved CFRP laminates reinforced by pre-hole Z-pinning (PHZ) technique[J]. Mechanics of Advanced Materials and Structures, 2022.

11） W Tang, Y Xu, X Hui, W Zhang. Multi-objective optimization of curing profile for autoclave processed composites: simultaneous control of curing time and process-induced defects[J]. Polymers, 2022.

10） 孙勇毅, 许英杰, 唐闻远, 惠新育, 张卫红. 共固化成型复合材料加筋壁板的固化变形仿真技术研究[J].航空制造技术, 2022.

9） S Zhang, Y Xu, W Zhang, X Hui. Micro-mechanical modeling study of the influence of cure process on the interfacial cracking of Z-pinned laminates[J]. Composite Structures, 2022.

8） X Hui, Y Xu, W Zhang. An integrated modeling of the curing process and transverse tensile damage of unidirectional CFRP composites[J]. Composite Structures, 2021.

7） X Hui, Y Xu, J Wang, W Zhang. Microscale viscoplastic analysis of unidirectional CFRP composites under the influence of curing process[J]. Composite Structures, 2021.

6） X Hui, Y Xu, Y Hou. A coupled micro–meso-scale study on the damage mechanism of 2D SiC/SiC ceramic matrix composites[J]. Mechanics of Advanced Materials and Structures, 2021.

5） 唐闻远, 许英杰, 孙勇毅, 张卫红, 惠新育. 基于温度曲线优化的复合材料热压罐固化时间与固化质量协同控制[J].材料工程，2021.

4） W Zhang, Y Xu, X Hui, W Zhang. A multi-dwell temperature profile design for the cure of thick CFRP composite laminates[J]. The International Journal of Advanced Manufacturing Technology, 2021.

3） X Hui, Y Xu, W Zhang. Multiscale model of micro curing residual stress evolution in carbon fiber-reinforced thermoset polymer composites[J]. Frontiers of Mechanical Engineering, 2020.

2） X Hui, H Wang, Y Xu, W Zhang. Numerical prediction of uniaxial tensile properties of 3D braided C/SiC composites[C]. IOP Publishing, 2019.

1） 惠新育, 许英杰, 张卫红, 何宗倍. 平纹编织SiC/SiC复合材料多尺度建模及强度预测[J].复合材料学报，2018.