期刊论文

  1. Li CS, Ding JJ, Zhang LC, et al. Densification effects on the fracture in fused silica under Vickers indentation[J]. Ceramics International, 2022, 48(7): 9330-9341.
  2. Li CS, Sun L, Chen ZX, et al. Wheel setting error modeling and compensation for arc envelope grinding of large-aperture aspherical optics[J]. Chinese Journal of Mechanical Engineering, 2022, 35(1): 1-13.
  3. Li CS, Ma YS, Sun L, et al. An Investigation into the densification-affected deformation and fracture in fused silica under contact sliding[J]. Micromachines 2022, 13: 1106.
  4. Li CS, Zhang LC, Ding JJ, et al. Kinematic modeling of surface topography ground by an electroplated diamond wheel[J]. The International Journal of Advanced Manufacturing Technology, 2021, 114: 2753–2765.
  5. Li CS, Zhang L, Sun L, et al. A finite element study on the effects of densification on fused silica under indentation[J]. Ceramics International, 2020, 46(17): 26861-26870.
  6. Li CS, Zhang LC, Sun L, et al. A quantitative analysis of the indentation fracture of fused silica[J]. Journal of the American Ceramic Society, 2019, 102.
  7. Li CS, Sun L, Yang SM, et al. Three-dimensional characterization and modeling of diamond electroplated grinding wheels[J]. International Journal of Mechanical Sciences, 2018, 144: 553-563
  8. Li CS, Yang SM, Wang CY, et al. EEMD based pitch evaluation method for accurate grating measurement by AFM[J]. Applied Surface Science, 2016, 380: 274-280
  9. Li CS, Yang SM, Wang CY, et al. Measurement and characterization of a nano-scale multiple-step height sample using a stylus profiler[J]. Applied Surface Science, 2016, 387: 732-735
  10. Li CS, Yang SM, Wang CY, et al. In-plane calibration for AFM[J]. International Journal of Nanomanufacturing, 2017, 13(2): 185-196
  11. Duan D, Han F, Ding J, Lin Q, Li C, et al. Microstructure and performance of brazed diamonds with multilayer graphene-modified Cu–Sn–Ti solder alloys [J]. Ceramics International, 2021, 47(16): 22854-22863.
  12. Liu Y, Chen P, Ding J, Sun L, Li T, Li C, et al. Extraction Methods and Implementation Technologies of Fuel Injection Pump Cam Profile Characteristics[J]. Mathematical Problems in Engineering, 2021, 2021: 1-7.
  13. Duan D, Li C, Ding J, et al. Microstructure and performance of brazed diamond segments with NiCr–x(CuCe) composite alloys[J]. Ceramics International, 2020, 46(9):13180-13188.
  14. Fang X, Li C, Sun L, et al. Hardness and friction coefficient of fused silica under scratching considering elastic recovery[J]. Ceramics International, 2020, 46(6): 8200-8208.
  15. Liu J, Sun L, Li C, et al. Research on processing technology of grinding aspheric workpiece in the five-axis machine tool[J]. International Journal of Nanomanufacturing, 2020, 16(3):243.
  16. Duan D, Sun L, Lin Q, Fang X, Li C, et al. Effect of Cu Ce alloy addition on the microstructure and mechanical performance of brazed diamonds with Ni Cr alloy[J]. International Journal of Refractory Metals & Hard Materials, 2019, 80: 253-258.
  17. Duan D, Sun L, Fang X, Lin Q, Li C, Jiang Z. Microstructure and processing performance of brazed diamond drill bits with Ni–Cr+ Cu–Ce composite solder[J]. Diamond and Related Materials, 2019, 93: 216-223
  18. Moridi A, Zhang L, Liu W, Duvall S，Brawley A，Jiang Z，Yang S，Li C. Characterisation of high thermal conductivity thin-film substrate systems and their interface thermal resistance[J]. Surface & coatings technology, 2018.
  19. 王琛英，杨树明，李常胜，等．基于原子层沉积的Al2O3薄膜微观形貌研究[J]，稀有金属材料与工程，2015, 44(12): 5
  20. Yang S, Li C, Wang C, et al. A sub-50nm three-step height sample for AFM calibration[J]. Measurement Science & Technology, 2014, 25(12):125004-125011(8).
  21. Lin Q, Yang S, Jing W, Li C, et al. Buckling and Delamination of Ti/Cu/Si Thin Film During Annealing[J]. Journal of Electronic Materials, 2014, 43(9):3351-3356.

专著

  1. Yang S, Li C, Zhang G. (2019) Measurement Technology for Precision Machines. In: Yang S., Jiang Z. (eds) Precision Machines. Precision Manufacturing. Springer, Singapore. https://doi.org/10.1007/978-981-10-5192-0_15-1
  2. Yang S, Zhang G, Li C, Jiang Z. (2020) Introduction to Precision Machines. In: Jiang Z., Yang S. (eds) Precision Machines. Precision Manufacturing. Springer, Singapore. https://doi.org/10.1007/978-981-13-0381-4_1

发明专利

  1. 李常胜，等。一种金刚石磨粒三维形貌表征与建模方法，2022-2-23，发明专利，202210164289.5（受理）
  2. 李常胜，等。一种金刚石平行砂轮表面三维形貌表征与建模方法，2022-2-23，发明专利，202210163669.7（受理）
  3. 李常胜，等。一种非球面圆弧包络磨削的对刀误差补偿方法， 2022-3-13，发明专利， 202210240897.X（授权）
  4. 丁建军，李冠群，李常胜，等。一种圆光栅编码器装配倾斜误差优化方法及系统，2022-1-22，发明专利，202210074710.3（受理）
  5. 丁建军，李冠群，李常胜，等。一种圆光栅编码器双读数头非对称安装偏心误差补偿方法，2022-3-13，发明专利， 202210240904.6（受理）
  6. 孙林, 刘剑锋, 李常胜, 等. 一种柱形光学元件的工装夹具，2018-12-06，发明专利，201811487943.6.
  7. 段端志，韩枫，林启敬，李常胜，等。一种微纳米粉体改性活性钎料及其制备方法，2022-2-22，发明专利，202010858316.X
  8. 孙林, 刘剑锋, 方续东, 陈兆翔, 李常胜，等. 一种测量直径可调的球径仪及曲率半径和偏移量测量方法，2018-07-16，发明专利，CN109186413A.
  9. 孙林，郭文超，宋明明，白杨，刘阳鹏，丁建军，李常胜等。基于摇篮式五轴数控机床的杯形圆弧砂轮的在位修整方法，2020-12-28，发明专利，202011587830.0.
  10. 蒋庄德，刘剑锋，孙林，李常胜，等。一种平面光学元件行星式研磨装置及研磨方法，2021-11-19，中国，202010415162.7.