期刊论文

2024

 

1. Chen Z-Y, Li C-X, et al. Breakthrough in Atmospheric Plasma Spraying of High-Density Composite Electrolytes: Deposition Behavior and Performance of Plasma-Sprayed GDC-LSGM on Porous Metal-Supported Solid Oxide Fuel Cells [J]. International Journal of Hydrogen Energy, 2024

2. Gao, Y;Huang, L;Zhang, BY; Gao, JT;Li, CJ; Li, C. X*(2024) Enhanced sintering ability and electrochemical performance of Gd0.1Ce0.9O1.95 composited with (Dy0.2Zr0.05Bi0.75)2O3 for low-temperature solid oxide fuel cells. Electrochimica Acta. Volume 475, 20 January 2024, 143614

3. Kangcheng Liu, Liyan Lou, Zhihai Cai, Changjiu Li, Haidou Wang, Cheng-Xin Li*.High temperature oxidation behavior of NiCoCrAlFeY high entropy bond coating fabricated by high-speed laser cladding. Corrosion Science. 2024, 226, 111659.

4. Zaheer Ud Din Babar, Muhammad Bilal Hanif, Xing Liang Lin, Jiutao Gao, Michał Mosiałek, Cheng-Xin Li*.Design of a highly stable and conductive electrolyte by suppressing barium copper oxide formation at the grain interfaces in Cux-doped BaCe0.7Zr0.1Dy0.2-xO3-δ sintered at a low temperature (1200. Journal of Colloid and Interface Science. 2024, 654, 1124-1135.

5. Yuan Gao, Ling Huang, Qingzhuo Li, Wei Liu, Jianpeng Chen, Shouqi Wang, Binyi Zhang, Jiutao Gao, Chang-Jiu Li, Cheng-Xin Li* .Highly conductive and stable ErxCe0.05Bi0.95-xO1.5+δ solid electrolytes for low-temperature solid-oxide fuel cells. International Journal of Hydrogen Energy. 2024, 50, 1329-1340.

 

2023

 

7. Yuan Gao, Mengxi Zhong,Jianpeng Chen,Shouqi Wang,Binyi Zhang, Qingzhuo Li,Wei Liu, Jiu-Tao Gao,* Cheng-Xin Li * Chang-Jiu Li.Stabilities and performance of single cubic phase dysprosium and zirconium co-doped bismuth oxide electrolytes for low temperature solid oxide fuel cells. Materials Advances. 2023, 4(13), 2839-2852.

8. Yi Liu, Xin Zhang, Hui-Yu Zhang, Chang-Jiu Li, Hyung Hee Cho, Cheng-Xin Li *.Investigation on microstructure evolution of iron-based alloy via synchronous powder-feeding underwater laser additive. Materials & Design. 2023, 111985.

9. Xing-Liang Lin, Zaheer Ud Din Babar, Yuan Gao, Jiu-Tao Gao*, Cheng-Xin Li*.Influence of Triple Sintering Additives (BaO-CuO-B2O3) on the Sintering Behavior and Conductivity of the Proton-Conducting BaZr0.1Ce0.7Y0.2O3−δ Electrolyte Sintered at 1150 °C. ACS Applied Eneregy Material. 2023, 6(9), 4833-4843.

10. Hui-Yu Zhang, Shi-Jie Deng, Sen-Hui Liu, Cheng-Xin Li*, Chang-Jiu LiStudy of annular coaxial powder feeding effect on the characteristics of laminar plasma jet and atmospheric cluster deposition. Surface and Coatings Technology. 2023, 65, 129604.

11. Jiu-Tao Gao, Muhammad Bilal Hanif, Hui-Yu Zhang, Martin Motola, Cheng-Xin Li*.Recent advances in microstructural control via thermal spraying for solid oxide fuel cells. Chemical Engineering Journal. 2023, 478, 147352.

12. Fang-Ze Han, Jing-Hui Zhang, Shan-Lin Zhang, Cheng-Xin Li*.Comparative study on the electrochemical performance of Sr(Ti0.3Fe0.7)O3-δ fuel electrode in different fuel gases for solid oxide electrochemical cells. Ceramics International. 2023, 49(02), 2410-2418.

13. Keyan Wang, Xianqing Yin, Cheng-Xin Li* and Kaiping Du.Effect of Zn on Phase Evolution and Shear Resistance of Stainless Steel and Aluminum Alloy Interface by Laser Cladding. Coatings. 2023， 13071267.

14. 张鑫，刘伊，娄丽艳，刘康诚，李成新，李长久.超高速线光斑激光熔覆不锈钢涂层显微结构及性能研究. 表面技术. 2023, 52(01), 336-345.

15. 孙少东，李智，袁本峰，李延安，刘云，刘鑫，路文学，张志伟，李成新.整体煤气化燃料电池发电与甲醇联产系统运行特性. 洁净煤技术. 2023, 29(03), 49-55.

 

2022

 

  1. Zhang, J. H., Han, F. Z., Li, C. X*., & Zhang, S. L. (2022). A-site deficient Sr0. 9Ti0. 3Fe0. 7O3− δ perovskite: A high stable cobalt-free oxygen electrode material for solid oxide electrochemical cells with excellent electrocatalytic activity and CO2 tolerance. Journal of the European Ceramic Society, 42(13), 5801-5812.
  2. Han, F. Z., Zhang, J. H., Zhang, S. L., & Li, C. X*. (2022). Comparative study on the electrochemical performance of Sr (Ti0. 3Fe0. 7) O3-δ fuel electrode in different fuel gases for solid oxide electrochemical cells. Ceramics International. Sep.21
  3. Li, C. J., Luo, X. T., Yao, S. W., Li, G. R., Li, C. X., & Yang, G. J. (2022). The Bonding Formation during Thermal Spraying of Ceramic Coatings: A Review. Journal of Thermal Spray Technology, 1-38. (IF=2.839, 2021)
  4. Li, C. J., Luo, X. T., Dong, X. Y., Zhang, L., & Li, C. X. (2022). Recent Research Advances in Plasma Spraying of Bulk-Like Dense Metal Coatings with Metallurgically Bonded Lamellae. Journal of Thermal Spray Technology, 1-23. (IF=2.839, 2021)
  5. Hu, Y., Gao, J. T., Li, C. X., & Li, C. J. (2022). Thermally sprayed MCO/FeCr24 interconnector with improved stability for tubular segmented-in-series SOFCs. Applied Surface Science, 587, 152861. (IF=7.392, 2021)
  6. Lou, L. Y., Liu, K. C., Jia, Y. J., Ji, G., Wang, W., Li, C. J., & Li, C. X. (2022). Microstructure and properties of lightweight Al0. 2CrNbTiV refractory high entropy alloy coating with different dilutions deposited by high speed laser cladding. Surface and Coatings Technology, 128873. (IF=4.865, 2021)
  7. Sen-Hui Liu, J. P. Trelles, Chang-Jiu Li, Cheng-Xin Li*, Hong-Bo Guo*, (2022) A review and progress of multi-phase flows in arc plasma spraying, Materials Today Physics. Sep. 6 ,100832 (综述 JCR Q1,正文共39页）(IF=11.021, 2021)

  8. Babar, Z. U. D., Hanif, M. B., Gao, J. T., Li, C. J., & Li, C. X. (2021). Sintering behavior of BaCe0. 7Zr0. 1Y0. 2O3-δ electrolyte at 1150° C with the utilization of CuO and Bi2O3 as sintering aids and its electrical performance. International Journal of Hydrogen Energy. (IF=7.139, 2021)

  9. Muhammad Bilal Hanif, Sajid Rauf,Martin Motol,Zaheer Ud Din Babar,Chang-JiuLi,Cheng-Xin Li*, Recent progress of perovskite-based electrolyte materials for solid oxide fuel cells and performance-optimizing strategies for energy storage applications, Materials Research Bulletin, 146 (2022) 111612 (IF=5.6, 2021)
  10. Muhammad Bilal Hanif, Cheng-Xin Li*, advancements, doping strategies, and the future perspective of perovskite-based Solid oxide fuel cells for energy storage applications, Chemical Engineering Journal, 428 (2022) 132603  (IF=16.744, 2021)

 

 

 

 2021 （点击链接打开全文）

 

  1. 马凯,李成新.真空冷喷涂技术及其在功能器件中的应用.中国表面工程,2021,33(04):26-50.

  2. 陈旭,方帅帅,李成新,李长久.等离子喷涂钛酸锶镧/金属复合涂层组织结构及性能的研究.热喷涂技术,2021,13(02):1-9+36.

  3. 孙浩,董昕远,任媛,雒晓涛,李成新,Mahrukh M.,朱永胜,李长久.大气等离子喷涂工艺参数与粉末成分对NiCrCuB涂层成分、组织结构及性能的影响.热喷涂技术,2021,13(01):1-12.

  4. Xu, Q.-L., Liu, K.-C., Wang, K.-Y., Lou, L.-Y., Zhang, Y., Li, C.-J., & Li, C.-X*. (2021). TGO and Al diffusion behavior of CuAlxNiCrFe high-entropy alloys fabricated by high-speed laser cladding for TBC bond coats. Corrosion Science, 192, 109781. (IF = 7.205)

  5. Hui-Yu Zhang, Sen-Hui Liu, Chang-Jiu Li, Cheng-Xin Li, In-situ heating effect of laminar plasma jet during Mo coatings deposition, Materials Letter, Aug.20 (IF= 3.423)

  6. Yang, H., Hanif, M. B., Zhang, S.-L., Li, C.-J., & Li, C.-X. (2021). Sintering behavior and electrochemical performance of A-site deficient SrxTi0.3Fe0·7O3-δ oxygen electrodes for solid oxide electrochemical cells. Ceramics International. 11 June 2021  (IF=4.527)

  7. Lu, F.-F., Ma, K., Li, C., & Li, C. (2021). Enhanced Corrosion Resistance of a Double Ceramic Composite Coating Deposited by a Novel Method on Magnesium-Lithium Alloy (LA43M) Substrates. Journal of Thermal Spray Technology, 30(3), 680–693.  (IF=2.757)

  8. Ahmed, U., Yi, L., Fei, L. F., Yasir, M., Li, C.-J., & Li, C.-X. (2021). Enhancement of Corrosion Resistance and Tribological Properties of LA43M Mg Alloy by Cold-Sprayed Aluminum Coatings Reinforced with Alumina and Carbon Nanotubes. Journal of Thermal Spray Technology, 30(3), 668–679.

  9. Chen, R., Zhang, S.-L., Li, C.-J., & Li, C.-X. (2021). Plasma-Sprayed High-Performance (Bi2O3)0.75(Y2O3)0.25 Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs). Journal of Thermal Spray Technology, 30(1), 1–9.

  10. Gao, J.-T., Li, J.-H., Wang, Y.-P., Li, C.-J., & Li, C.-X. (2021). Performance and Stability of Plasma-Sprayed 10 × 10 cm 2 Self-sealing Metal-Supported Solid Oxide Fuel Cells. Journal of Thermal Spray Technology, 30(4), 1059–1068.

  11. Zhou, H., Li, C., Bennett, C., Tanvir, H., & Li, C. X (2021). Numerical Analysis of Deformation Behavior and Interface Bonding of Ti6Al4V Particle After Subsequent Impact During Cold Spraying. Journal of Thermal Spray Technology, 30(4), 1093–1106.

  12. Liu, Y., Li, C., Huang, X., Zhang, H., & Li, C. (2021). Investigation on solidification structure and temperature field with novel processing of synchronous powder-feeding underwater laser cladding. Journal of Materials Processing Technology., 296(October 2020), 117166. (IF =5.551)

  13. Sen-Hui Liu, J. P .Trelles, Anthony. B. Murphy, Wen-Ting He, Jia Shi, Shan, Li, Chang-Jiu Li, Cheng-Xin Li, Hong-Bo Guo*, Low-pressure plasma -induced physical vapor deposition of advanced thermal barrier coatings: microsturtures, modelling and mechanisms, Materials Today Physics, 20,2021 (IF=10.44, 共52页)

  14. Sen-Hui Liu, Ji Gang, Chang-Jiu Li, Cheng-Xin Li*, Hong-Bo Guo*, (2021) Novel long laminar plasma sprayed hybrid structure thermal barrier coatings for high-temperature anti-sintering and volcanic ash corrosion resistance，Journal of Materials Science & Technology.79,141-146 (IF = 8.067)

  15. Yue-Peng Wang, Jiu-Tao Gao, Chang-Jiu Li, Cheng-Xin Li*, Oxidation behavior and interface diffusion of porous metal supported SOFCs with all plasma sprayed functional layers in air at 650℃, International Journal of Green Energy, 19(8), 818-826.23 （IF=2.457）

  16. Yue-Peng Wang, Jiu-Tao Gao, Jia-Hong Li, Chang-Jiu Li, Cheng-Xin Li*, Preparation of Bulk-like La0.8Sr0.2Ga0.8Mg0.2O3-δ Coatings for Porous Metal-Supported Solid Oxide Fuel Cells via Plasma Spraying at Increased Particle Temperatures, International Journal of Hydrogen Energy, 2021,  46(64), 32655-32664.(IF 5.816)

  17. Shan-Lin Zhang*, Yuan-Bo Shang, Cheng-Xin Li*, Chang-Jiu Li, Vacuum cold sprayed nanostructured La0.6Sr0.4Co0.2Fe0.8O3−δ as a high-performance cathode for porous metal-supported solid oxide fuel cells operating bellow 600 °C, Materials Today Energy, 2021 21, 100815.(IF=7.311)

  18. Hao Yang, Muhammad Bilal Hanif, Shan-Lin Zhang*, Chang-Jiu Li, Cheng-Xin Li*, Sintering Behavior and Electrochemical Performance of A-site deficient SrxTi0.3Fe0.7O3-d Oxygen Electrodes for Improved Solid Oxide Electrochemical Cells, Ceramics International, 2021, 47(17), 25051-25058.(IF=4.527)

  19. Babar, Z. U. D., Hanif, M. B., Gao, J. T., Li, C. J., & Li, C. X. (2021). Sintering behavior of BaCe0. 7Zr0. 1Y0. 2O3-δ electrolyte at 1150° C with the utilization of CuO and Bi2O3 as sintering aids and its electrical performance. International Journal of Hydrogen Energy.

  20. Muhammad Bilal Hanif., Gao, J. T., Shaheen, K., Wang, Y. P., Yasir, M., Li, C. J., & Li, C. X. (2021). Highly active and novel A-site deficient symmetric electrode material (Sr0. 3La0. 7) 1− x (Fe0. 7Ti0. 3) 0.9 Ni0. 1O3− δ and its effect on electrochemical performance of SOFCs. International Journal of Hydrogen Energy, 46(12), 8778-8791.

  21. Muhammad Bilal Hanif., Gao, J. T., Shaheen, K., Wang, Y. P., Yasir, M., Li, C. J., & Li, C. X. (2021). Microstructural analysis of highly active cathode material La0. 7Sr0. 3Ti0. 15Fe0. 65Ni0. 2O3-δ (LSTFN) by optimizing different processing parameters. Ceramics International, 47(8), 10893-10904.

  22. Muhammad Bilal Hanif, Rauf, S., Motola, M., Babar, Z. U. D., Li, C.-J., & Li, C.-X. (2021). Recent progress of perovskite-based electrolyte materials for Solid oxide fuel cells and performance optimizing strategies for energy storage applications. Materials Research Bulletin, 146(August 2021), 111612. (IF = 4.641)

  23. Muhammad Bilal Hanif, Martin Motola, Sana Qayyu, Sajid Rauf, Azqa Khalid, Chang-Jiu Li, Cheng-Xin Li*, Recent advancements, doping strategies and the future perspective of perovskite-based solid oxide fuel cells for energy conversion, Chemical Engineering Journal,  428, 15 January 2022, 132603. (IF =13.272)

 

      2020

  1. 周红霞, 李成新，李长久.(2020).冷喷涂制备钛及钛合金涂层研究进展. 中国表面工程(02),1-14.

  2. 张煜, 娄丽艳, 徐庆龙, 李岩, 李长久, & 李成新. (2020). 超高速激光熔覆镍基wc涂层的显微结构与耐磨性能. 金属学报，(11).

  3. 娄丽艳,张煜,徐庆龙,王轲岩,澹台凡亮,李长久 & 李成新.(2020).超高速激光熔覆低稀释率金属涂层微观组织及性能. 中国表面工程(02),149-159

  4. 娄丽艳,李成新,张煜,李长久,田洪芳,澹台凡亮. （2020）低功率超高速激光熔覆FeCr合金薄涂层微观结构与表面形貌演化. 燕山大学学报 .(02)

  5. Liu, C., Zhang, L., Yuan, X., Liu, H., Li, C. X, & Hou, X. (2020). Preparation of ZrB2-ZrC-SiC-ZrO2 nanopowders with in-situ grown homogeneously dispersed SiC nanowires. Materials & Design, 196, 109186.(IF=7.991)

  6. Hanif, M. B., Gao, J. T., qayyum, S., Shaheen, K., Wang, Y. P., Yasir, M., Li, C. J., & Li, C. X. (2020). Microstructural analysis of highly active cathode material La0.7Sr0.3Ti0.15Fe0.65Ni0.2O3-δ (LSTFN) by optimizing different processing parameters. Ceramics International, December. https://doi.org/10.1016/j.ceramint.2020.12.209 (IF=4.527)

  7. Zhou, J., Li, C.-J., & Li, C.-X. (2020). Fabrication of Metal Matrix Composites via High-Speed Particle Implantation. Journal of Thermal Spray Technology, 29(8), 1910–1925.

  8. Ma, K., Li, C. J., & Li, C. X. (2020). Narrow and Thin Copper Linear Pattern Deposited by Vacuum Cold Spraying and Deposition Behavior Simulation. Journal of Thermal Spray Technology. https://doi.org/10.1007/s11666-020-01102-w

  9. J. T. Gao, Li, J., Feng, Q., Li, C., & Li, C. (2020). High performance of ceramic current collector fabricated at 550 C through in-situ joining of oxide fuel cells. International Journal of Hydrogen Energy, 1–8. https://doi.org/10.1016/j.ijhydene.2020.06.237 (IF = 5.816)

  10. J. T Gao, JH Li, YP Wang, CJ Li, CX Li (2020) Self-Sealing Metal-Supported SOFC Fabricated by Plasma Spraying and Its Performance under Unbalanced Gas Pressure, Journal of Thermal Spray Technology, https://doi.org/10.1007/s11666-020-01096-5

  11. Jiu-Tao Gao，Lu-Xun Cheng，Yue-Peng Wang， Chang-Jiu Li, C.-X. L. (2020). Study on Deposition Behavior of Less Than 5 μm YSZ Particles in VLPPS. Journal of Thermal Spray Technology, Sep.09. https://doi.org/https://doi.org/10.1007/s11666-020-01087-6

  12. Zhang, H. Y, Liu, S. H, Li, C. J, & Li, C. X* (2020). Deposition and oxidation behavior of atmospheric laminar plasma sprayed Mo coatings from 200 mm to 400 mm under 20 kW : Numerical and experimental analyses. Surface & Coatings Technology, 400(May). https://doi.org/https://doi.org/10.1016/j.surfcoat.2020.126245 (IF=4.158)

  13. Zhang, H. Y., Li, C. X*., Liu, S. H., Li, L., Yang, G. J., Li, C. J., & Zhang, S. L. (2020). Splash involved deposition behavior and erosion mechanism of long laminar plasma sprayed NiCrBSi coatings. , Surface and Coatings Technology, 25939.

  14. Bilal, M., Gao, J., Shaheen, K., Wang, Y., Yasir, M., Zhang, S., Li, C. J, & Li, C. X* (2020). Performance evaluation of highly active and novel La0.7Sr0.3Ti0.1Fe0.6Ni0.3O3-δ material both as cathode and anode for intermediate-temperature symmetrical solid oxide fuel cell. Journal of Power Sources, 472(July), 228498. https://doi.org/10.1016/j.jpowsour.2020.228498 (IF = 9.127)

  15. Osama Asghar, Lou Li-Yan, Muhammad Yasir, Li Chang-Jiu, Cheng-Xin Li*. et al (2020), Enhanced tribological properties of LA43M magnesium alloy by Ni60 coating via ultra-high speed laser cladding, Coatings,10,638

  16. Xu, Q. L, Zhang, Y., Liu, S. H, Li, C. J, & Li, C. X* (2020). High-temperature oxidation behavior of CuAlNiCrFe high-entropy alloy bond coats deposited using high-speed laser cladding process. Surface Coatings and Technology , 398(April), 126093. https://doi.org/10.1016/j.surfcoat.2020.126093

  17. Sen-Hui Liu, Trelles. J. P, Chang Jiu Li, Hong-Bo Guo*, ChengXin Li*, （2020）Numerical Analysis of the Plasma-Induced Self-Shadowing Effect of Impinging Particles and Phases Transformation in A Novel Long Laminar Plasma Jet, Journal of Physics D: Applied Physics, 20386

  18. 刘森辉，李长久，李成新* 等.新型大气长层流等离子体喷涂方法和研究进展.  中国表面工程，邀请综述, 2019 （封面论文，全文2.6万字）,32 （6）

  19. Hongxia Zhou, Chengxin Li*, Hao Yang, Xiaotao Luo,Guanjun Yang, Wenya Li, Tanvir Hussain, Changjiu Li, (2020) Microsturcture of cross-linked high densification network and strengthening mechanism in cold-sprayed Ti-6Al-V coating after heat treatment. Journal of Thermal Spray Technology 

  20. Fei-Fei Lu, Kai Ma, Cheng-xin Li*, Muhammad Yasir, Xiao-Tao Luo, &Chang-jiu Li. (2020) Enhanced corrosion resistance of cold-sprayed and shot-peened aluminum coatings on LA43M magnesium alloy. Surface & coatings Technology (IF=3.192). 

  21. 鲁飞飞，康思远，李成新*，李长久，(2020) 镁锂合金冷喷铝防护涂层的喷丸强化及耐腐蚀性能，材料保护(已录用)。

  22. Li, J., Li, C., & Li, C.X* (2020). Construction of plasma sprayed surfaces with various scales and the effect on hydrophobicity. Surface and Coatings Technology, 385(February), 125447. https://doi.org/10.1016/j.surfcoat.2020.125447

  23. Hu, Y. Z., Su, Y. T., Li, C. X*., Li, C. J., & Yang, G. J. (2020). Dense Mn1.5Co1.5O4 coatings with excellent long-term stability and electrical performance under the SOFC cathode environment. Applied Surface Science, 499(August 2019), 143726. https://doi.org/10.1016/j.apsusc.2019.143726  （IF = 6.182)

  24. Li-Yan, L., Yu, Z., Yun-Jie, J., Yan, L., Hong-Fang, T., Yu-Jun, C., & Cheng-Xin, Li*. (2020). High speed laser cladded Ti-Cu-NiCoCrAlTaY burn resistant coating and its oxidation behavior. Surface and Coatings Technology, 392(March), 125697. https://doi.org/10.1016/j.surfcoat.2020.125697

  25. Zhou, J., Ma, K., Li, C. X*., Yasir, M., Luo, X. T., & Li, C. J. (2020). Microstructures of aluminum surfaces reinforced with 316L stainless steel particles via high-speed particle injection and the resulting double-strengthening mechanism. , Surface and Coatings Technology, 385, 125380.

  26. Liu, Y., Li, C. X*., Huang, X. F., Ma, K., Luo, X. T., & Li, C. J. (2020). Effect of water environment on particle deposition of underwater cold spray.  Applied Surface Science, 506, 144542. （IF = 6.182)

  27. Wang, Y. Peng, Gao, J. Tao, Chen, W., Li, C. Xin, Zhang, S. lin, Yang, G. Jun, & Li, C. Jiu. (2020). Development of ScSZ Electrolyte by Very Low Pressure Plasma Spraying for High-Performance Metal-Supported SOFCs. Journal of Thermal Spray Technology, 29(1–2), 223–231. https://doi.org/10.1007/s11666-019-00970-1

  28. Wang, Y. P., Liu, S. H., Zhang, H. Y., Li, C. X., Zhang, S. L., Yang, G. J., & Li, C. J. (2020). Structured La0.6Sr0.4Co0.2Fe0.8O3-δ cathode with large-scale vertical cracks by atmospheric laminar plasma spraying for IT-SOFCs. Journal of Alloys and Compounds, 825, 153865. https://doi.org/10.1016/j.jallcom.2020.153865 (IF = 4.65)

     

     2019 

  29. 谢扬, 马凯, 李成新, 杨冠军, & 李长久. (2019). 真空冷喷涂lini0.33co0.33mn0.33o2涂层颗粒沉积行为研究. 热喷涂技术, 11(01), 36-42.

  30. Siddique, S., Li, C. X., Bernussi, A. A., Hussain, S. W., & Yasir, M. (2019). Enhanced Electrochemical and Tribological Properties of AZ91D Magnesium Alloy via Cold Spraying of Aluminum Alloy. Journal of Thermal Spray Technology, 28(7), 1739–1748. https://doi.org/10.1007/s11666-019-00915-8

  31. Li, C. J., Zhang, Q. L., Yao, S. W., Yang, G. J., & Li, C. X. (2019). Plasma Spraying of Dense Ceramic Coating with Fully Bonded Lamellae Through Materials Design Based on the Critical Bonding Temperature Concept. Journal of Thermal Spray Technology, 28(1–2), 53–62. https://doi.org/10.1007/s11666-018-0818-8

  32.  Hongxia Zhou, Chengxin Li*, Hao Yang, Xiaotao Luo,Guanjun Yang, Wenya Li, Tanvir Hussain, Changjiu Li, Pores structure change induced by heat treatment in cold-sprayed Ti6Al4V coating, Journal of Thermal Spray Technology , 2019,

  33.      Sen-Hui Liu, Trelles, Juan, Murphy, Anthony, Li, Lu, Zhang, Shanlin, Yang, GuanJun, Li, Cheng-Xin Li*,Chang-Jiu Li,Numerical simulation of the flow characteristics inside a novel plasma spray torch, Journal of Physics D: Applied Physics, 2019, Accepted.

  34. .  Shan-Lin Zhang, Hongqian Wang, Matthew Y. Lu, Cheng-Xin Li, Chang-Jiu Li, Scott A.Barnett, Electrochemical performance and stability of SrTi0.3Fe0.6Co0.1O3-δinfiltrated La0.8Sr0.2MnO3Zr0.92Y0.16O2-δoxygen electrodes for intermediate-temperature solid oxide electrochemical cells, Journal of Power Sources, 2019, 426(30), 233-241

  35. .      Sen-Hui Liu, Hui-Yu Zhang, Yue-Peng Wang, Gang Ji,Shan-Lin Zhang, Lu Li, Pan Xu, Cheng-Xin Li*, Chang-Jiu Li, Microstructural evolution of alumina coatings by a novel long laminar plasma spraying method, Surface & Coatings Technology, 2019, 363, 210-220, DOI: 10.1016/j.surfcoat.2019.02.018

  36.       Sen-Hui Liu, Cheng-xin Li*, Lu Li, Jia-hua Huang, Shan-lin Zhang,Guan-jun Yang, Chang-jiu Li,  Generation of Long Laminar Plasma Jets: Experimental and Numerical Analyses, Plasma Chemistry and Plasma Processing, 2019,39(2), 377-394, DOI: 10.1007/s11090-018-9949-4  (每年只收85篇左右）

    2018

  37.  Jie Li, Cheng-Xin Li*, Guan-Jun Yang, Chang-Jiu Li,Wettability transition on micro-nano hierarchical structured Ni20Cr coating surface by selective spontaneous adsorption during vacuum evacuation, Materials Chemistry and Physics, 2018, 219, 292-302, 10.1016/j.matchemphys.2018.08.049

  38.       Hongxia Zhou, Cheng-Xin Li*, Gang Ji, Silin Fu, Hao Yang, Xiaotao Luo,Guanjun Yang, Wenya Li, Changjiu Li, Local microstructure inhomogeneity and gas temperature effect in in-situ shot-peening assisted cold-sprayed Ti-6Al-4V coating, Journal of Alloys and Compounds, 2018, 766, 694-704. DOI: 10.1016/j.jallcom.2018.07.009

  39.       Li-Shuang Wang, Cheng-Xin Li*, Chang-Jiu Li and Guan-Jun Yang, Performance of LSGM-based SOFCs with atmospheric plasma spraying La-doped CeO2 buffer layer, Electrochimica Acta, 2018, 275(10), 208-217,  DOI: 10.1016/j.electacta.2018.04.101 

  40.       Sen-Hui Liu, Cheng-Xin Li*, Hui-Yu Zhang, Shan-Lin Zhang, Lu Li, Pan Xu, Guan-Jun Yang, Chang-Jiu Li, A Novel Structure of YSZ Coatings by Atmospheric Laminar Plasma Spraying Technology, Scripta Materialia, 2018, 153, 73-76，DOI: 10.1016/j.scriptamat.2018.04.022

  41. .   Li-Shuang Wang, Cheng-Xin Li*, Kai Ma, Guan-Jun Yang, and Chang-Jiu Li, La0.8Sr0.2Ga0.8Mg0.2O3Electrolytes Prepared by Vacuum Cold Spray Under Heated Gas for Improved Performance of SOFCs, Ceramics International, 2018, 44 (12), 13773-13781, DOI:10.1016/j.ceramint.2018.04.220

  42.    Shan-Lin Zhang, Xiao-Na Wang, Cheng-Xin Li*,Chang-Jiu Li, Sodium Ionic Conductivity and Stability of Amorphous Na2Si2O5 doped with MxOy (M = Zr, Y, and Sm), Materials and Design, 2018, 143, 104-111, DOI: 10.1016/j.matdes.2018.01.041

  43.    Silin Fu, Chengxin Li*, Yingkang We, Xiaotao Luo, Guanjun Yang, Changjiu Li, Jinglong Li, Novel Method of Aluminum to Copper Bonding by Cold Spray, Journal of Thermal Spray Technology, 2018, 27(4), 624-640. DOI:10.1007/s11666-018-0707-1

  44.  Silin Fu, Chengxin Li*, Yingkang We, Xiaotao Luo, Guanjun Yang, Jinglong Li, Changjiu Li, Microstructure and Mechanical Properties of Al-Cu Joints by Cold Spray Bonding, Journal of Mechanical Engineering, 2018, 54(10), 93-102. DOI：10.3901/JME.2018.10.093(付斯林, 李成新, 魏瑛康, 雒晓涛, 杨冠军, 李京龙, 李长久, 冷喷连接铝铜异质接头的组织结构和力学性能, 机械工程学报, 2018, 54(10), 93-102.)

  45. Sen-Hui Liu, Cheng-xin Li*, Lu Li, Jia-hua Huang, Ying-zhen Hu, Chang-jiu Li, Guan-jun Yang, Development of Long Laminar Plasma Jet on Thermal Spra ying Process: Microstructures of Zirconia Coatings, Surface and Coatings Technology, 2018, 337, 241-249 DOI: 10.1016/j.surfcoat.2018.01.003

  46.   Jie Li, Yu Zhang, Kai Ma, Xi-De Pan*, Cheng-Xin Li*, Chang-Jiu Li, Microstructure and Transparent Super-Hydrophobic Performance of Vacuum Cold Sprayed Al2O3and SiO2Aerogel Composite Coating, Journal of Thermal Spray Technology, 2018, 27(3), 471-482, DOI: 10.1007/s11666-017-0677-8 

  47.   Jie Li, Cheng-Xin Li*, Guan-Jun Yang, Chang-Jiu Li, Effect of vapor deposition in shrouded plasma spraying on morphology and wettability of the metallic Ni20Cr coating surface, Journal of Alloys and Compounds, 2018, 735, 430-440.

    2017

  48.  Shan-Lin Zhang, Kuan Chen, Ai-Ping Zhang, Cheng-Xin Li*, Chang-Jiu Li, Effect of Fe doping on the performance of suspension plasma-sprayed PrBa0.5Sr0.5Co2-xFexO5+δ cathodes for intermediate-temperature solid oxide fuel cells, Ceramics International, 2017, 43(15), 11648-11655.

  49.   Ying-Zhen Hu, Shu-Wei Yao, Cheng-Xin Li*, Chang-Jiu Li, Shan-Lin Zhang, Influence of pre-reduction on microstructure homogeneity and electrical properties of APS Mn1.5Co1.5O4 coatings for SOFC interconnects,Journal of Hydrogen Energy, 2017, 42(44), 27241-27253, DOI: 10.1016/j.ijhydene.2017.09.073

  50.  Li-Shuang Wang, Cheng-Xin Li*,Guang-Rong Li, Guan-Jun Yang, Shan-Lin Zhang, and Chang-Jiu Li, Enhanced sintering behavior of LSGM electrolyte and its performance for solid oxide fuel cells deposited by vacuum cold spray, Journal of the European Ceramic Society 37 (2017) pp. 4751-4761.

  51.  李成新, 王岳鹏, 张山林, 杨冠军, 李长久, 先进陶瓷涂层结构调控及其在固体氧化物燃料电池中的应用, 中国表面工程, 2017, 30(2): 1-19.

  52.   Shan-Lin Zhang, Ai-Ping Zhang, Cheng-Xin Li*, Guan-Jun Yang, Chang-Jiu Li, Suspension Plasma Sprayed Sr2Fe1.4Mo0.6O6−δElectrodes for Solid Oxide Fuel Cells, Journal of Thermal Spray Technology, 2017, 26(3), 432-440, 10.1007/s11666-016-0478-5

  53.   Shan-Lin Zhang,Cheng-Xin Li*, Shuai Liu,Chang-Jiu Li*, Guan-Jun Yang, Peng-Jiang He, Liang-Liang Yun, Bo Song, Ying-Xin Xie, Thermally Sprayed Large Tubular Solid Oxide Fuel Cells and Its Stack: Geometry Optimization, Preparation, and Performance, Journal of Thermal Spray Technology, 2017, 26(3), 441-455, DOI :10.1007/s11666-016-0506-5

  54.  Ying-Zhen Hu, Cheng-Xin Li, Shan-Lin Zhang, Chang-Jiu Li, Guan-Jun Yang, Mn-Co Spinel Coating for Protection of Ferretic Stainless Steel from High-temperature Oxidation, Thermal Spray Technology, 2017, 3, 8-20, 胡莹珍，李成新，张山林，李长久，杨冠军，Mn-Co尖晶石涂层对铁素体不锈钢的高温防护, 热喷涂技术, 2017, 3, 8-20, DOI：10.3969/j.issn.1674-7127.2017.03.002

  55.  Li-Shuang Wang，Heng-Fu Zhou，Cheng-Xin Li，Yu-Yue Wang，Guan-Jun Yang,Xiao-Tao Luo, Chang-Jiu Li, Characterization of the Microstructure of Al2O3 Coating Deposited by Vacuum Cold Spra, Thermal Spray Technology, , 2017, 9 (3), 36-45王丽爽, 周恒福, 李成新, 王豫跃, 杨冠军, 雒晓涛, 李长久, 真空冷喷涂致密Al2O3陶瓷涂层微观结构的研究, 热喷涂技术, 2017, 9 (3), 36-45, DOI: 10.3969/j.issn.1674-7127.2017.03.006

    2016

  56. Li-Shuang Wang, Heng-Fu Zhou, Ke-Jie Zhang, Yu-Yue Wang*, Cheng-Xin Li*, Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li,Effect of the Powder Particle Structure and Substrate Hardness During Vacuum Cold Spraying of Al2O3, Ceramics International, 2016, 43 (5), 4390-4398 , DOI:10.1016/j.ceramint.2016.12.085

  57.  Jie Li, Cheng-Xin Li*, Qing-Yu Chen, Jiu-Tao Gao, Jun Wang, Guan-Jun Yang, Chang-Jiu Li, Super-Hydrophobic Surface Prepared by Lanthanide Oxide Ceramic Deposition through PS-PVD Process,Journal of Thermal Spray Technology, 2017, 26(3), 398-408, DOI: 10.1007/s11666-016-0499-0

  58.  Shan-Lin Zhang, Jiang-Yuan Huang, Cheng-Xin Li*, Guan-Jun Yang, Chang-Jiu Li, Relationship Between Designed Three-Dimensional YSZ Electrolyte Surface Area and Performance of Solution-Precursor Plasma-Sprayed La0.8Sr0.2MnO3−δ Cathodes,  Journal of Thermal Spray Technology, 2016, 25(8), 1692-1699, DOI: 10.1007/s11666-016-0466-9

  59. Ying-Zhen Hu, Liang-Liang Yun, Tao Wei, Cheng-Xin Li*, Zhen Qi, Guan-Jun Yang, Chang-Jiu Li, Meilin Liu; Aerosol sprayed Mn1.5Co1.5O4 protective coatings for metallic interconnect of solid oxide fuel cells, Journal of Hydrogen Energy, 2016,41(44), 20305-20313, DOI: 10.1016/j.ijhydene.2016.09.096

  60.   Haibin Sun，Shanlin Zhang，Chengxin Li*，Ben Rainwater，Yu Chen, Meilin Liu, Atmospheric plasma-sprayed BaZr0.1Ce0.7Y0.1Yb0.1O3-d (BZCYYb) electrolyte membranes for intermediate-temperature solid oxide fuel cells, Ceramics International, 2016, 42, 19231-19236, DOI:10.1016/j.ceramint.2016.09.088

  61. Shan-Lin Zhang, Chang-Jiu Li, Cheng-Xin Li*, Guan-Jun Yang, Kevin Huang, Meilin Liu, Liquid plasma sprayed nano-network La0.4Sr0.6Co0.2Fe0.8O3/Ce0.8Gd0.2O2 composite as a high-performance cathode for intermediate-temperature solid oxide fuel cells, Journal of Power Sources, 2016, 327, 622–628, DOI: 10.1016/j.jpowsour.2016.07.108

  62. Shu-Wei Yao, Chang-Jiu Li*, Jia-Jia Tian, Guan-Jun Yang, Cheng-Xin Li, Conditions and mechanisms for the bonding of a molten ceramic droplet to a substrate after high-speed impact, Acta Materialia, 2016, 119, 9-25, http://dx.doi.org/10.1016/j.actamat.2016.07.057

  63.  Shan-Lin Zhang, Cheng-Xin Li*,Chang-Jiu Li, Meilin Liu, Guan-Jun Yang, Investigation into the diffusion and oxidation behavior of the interface between a plasma-sprayed anode and a porous steel support for solid oxide fuel cells, Journal of Power Sources, 2016, 323, 1-7, DOI: 10.1016/j.jpowsour.2016.05.020

  64.  Shan-Lin Zhang, Hai-Xin Yu, Chang-Jiu Li,Cheng-Xin Li*, Samson Lai, Guan-Jun Yang, Meilin Liu, Thermal sprayed high-performance porous metal-supported solid oxide fuel cells with nanostructured La0.6Sr0.4Co0.2Fe0.8O3-δcathodes, Journal of Materials Chemistry A, 2016, 4, 7461 – 7468, DOI: 10.1039/c6ta02065h

  65.  Ying Li, Shan-Lin Zhang , Cheng-Xin Li*, Tao Wei, Guan-Jun Yang, Chang-Jiu Li, Meilin Liu,  La2NiO4+δInfiltration of Plasma-Sprayed LSCF coating for Cathode Performance Improvement,Journal of Thermal Spray Technology, 2016, 25(1-2), 392-400, DOI: 10.1007/s11666-015-0369-1

  66. Ying-Zhen Hu, Cheng-Xin Li*, Shan-Lin Zhang, Guan-Jun Yang, Xiao-Tao Luo, Chang-Jiu Li, The microstructure stability of Atmospheric plasma sprayed (Mn,Co)3O4 coating under H2 and air environment, Journal of Thermal Spray Technology, 2016, 5 (1-2), 301-310, DOI: 10.1007/s11666-015-0346-8.

  67. Shan-Lin Zhang, Cheng-Xin Li*, Chang-Jiu Li, Guan-Jun Yang, Meilin Liu, Application of high velocity oxygen fuel flame (HVOF) spraying to fabrication of La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte for solid oxide fuel cells, Journal of Power Sources, 2016, 301, 62-71, DOI: 10.1016/j.jpowsour.2015.09.050.

    2015

  68. Qing-Yu Chen, Cheng-Xin Li*, Tao Wei, Haibin Sun, Shan-Lin Zhang, Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li*, Meilin Liu, Controlling grain size in columnar YSZ coating formation by droplet filtering assisted PS-PVD processing, RSC Advances, 2015, 5, 102126-102133, DOI: 10.1039/C5RA20799A

  69. Qing-Yu Chen, Cheng-Xin Li*, Jian-Zhuang Zhao, Guan-Jun Yanga, Chang-Jiu Li, Microstructure of YSZ Coatings Deposited by PS-PVD Using 45kW Shrouded Plasma Torch, Materials and Manufacturing Processes, 2015, 0, 1–9, 2015 DOI:10.1080/10426914.2015.1019100

  70. Shan-Lin Zhang, Tao Liu, Chang-Jiu Li, Shu-Wei Yao,Cheng-Xin Li*,Guan-Jun Yang, Meilin Liu Atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte membranes for intermediate-temperature solid oxide fuel cells, Journal of Materials Chemistry A, 2015, 3, 7535 - 7553, DOI: 10.1039/c5ta01203a

  71. Cheng-Xin Li, Bin Zhang, Xiao-Fei Qin, Guang-Yong Zhang, Xiao-Tao Luo, Guan-Jun Yang, Chang-Jiu Li, Study of durabilityin molten zinc of plasma sprayed Fe-Al/Al2O3composite coatings, Materials Manufacturing and Processing Technology, 2015, Accepted

  72.  Qing-Yu Chen, Xiao-Zhuang Peng, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Characterization of Plasma Jet in Plasma Spray-Physical Vapor Deposition of YSZ Using a <80 kW Shrouded Torch Based on Optical Emission Spectroscopy, Journal of Thermal Spray Technology, 2015, 24(6), pp 1038-1045

  73. Shan-Lin Zhang, Cheng-Xin Li, Chang-Jiu Li, Dominant Factors Influencing the Electrochemical Performance of Plasma-Sprayed LSGM Electrolyte, ECS Transactions, 2015, 68(1), 433-439, doi: 10.1149/06801.0433ecst 

  74. Tao Liu, Xiao-Tao Luo, Xu Chen, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Morphology and Size Evolution of Interlamellar Two-Dimensional Pores in Plasma-Sprayed La2Zr2O7 Coatings During Thermal Exposure at 1300oC, Journal of Thermal Spray Technology, 2015, 24(5), 739-,748, 10.1007/s11666-015-0236-0

  75.  Bang-Yan Zhang, Jing Shi, Guan-Jun Yang, Cheng-Xin Li, and Chang-Jiu Li, Healing of the Interface Between Splashed Particles and Underlying Bulk Coating and Its Influence on Isothermal Oxidation Behavior of LPPS MCrAlY Bond Coat, Journal of Thermal Spray Technology,2015, 24(4), 611-621, 10.1007/s11666-015-0218-2

  76.  Guan-Jun Yang, Pei-Hu Gao, Cheng-Xin Li, Chang-Jiu Li, Mechanical property and wear performance dependence on processing condition for cold-sprayed WC-(nanoWC-Co), Applied Surface Science, 2015, 332(30), 80-88, doi:10.1016/j.apsusc.2015.01.138

  77. Hai-Long Yao, Guan-Jun Yang, Sheng-Qiang Fan, Cheng-Xin Li, and Chang-Jiu Li, Ceramic Nano-particle/Substrate Interface Bonding Formation Derived from Dynamic Mechanical Force at Room Temperature: HRTEM Examination, Journal of Thermal Spray Technology,2015, 24(4), 720-728, 10.1007/s11666-015-0226-2

  78.  Er-Juan Yang, Xiao-Tao Luo, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, Makoto Takahashi, Epitaxial grain growth during 8YSZ splat formation on polycrystalline YSZ substrates by plasma spraying, Surface and Coatings Technology, 2015, 274(25), 37–43, doi:10.1016/j.surfcoat.2015.04.031

  79. Xiao-Tao Luo, Cheng-Xin Li, Fu-Lin Shang, Guan-Jun Yang, Yu-Yue Wang, and Chang-Jiu Li, WC-Co Composite Coating Deposited by Cold Spraying of a Core-Shell-Structured WC-Co Powder, Journal of Thermal Spray Technology, 2015, 24(1-2), 100-107

  80. Hui Dong, Guan-Jun Yang, Hong-Neng Cai, Cheng-Xin Li, Chang-Jiu Li, Propagation feature of cracks in plasma-sprayed YSZ coatings under gradient thermal cycling, Ceramics International, 2015, 41(3), 3481-3489, doi:10.1016/j.ceramint.2014.10.174

  81. Hui Dong, Guan-Jun Yang, Hong-Neng Cai, Hang Ding, Cheng-Xin Li, Chang-Jiu Li, The influence of temperature gradient across YSZ on thermal cyclic lifetime of plasma-sprayed thermal barrier coatings, Ceramics International,2015, 41(9), 11046–11056, doi:10.1016/j.ceramint.2015.05.049

  82. Er-Juan Yang, Xiao-Tao Luo, Guan-Jun Yang, Cheng-Xin Li, Chang-Jiu Li, A TEM Study of the Microstructure of Plasma-Sprayed YSZ Near Inter-splat Interfaces, 2015, 24(6), 907-914, 10.1007/s11666-015-0260-0

  83. Qing-Yu Chen, Cheng-Xin Li*, Jian-Zhuang Zhao, Guan-Jun Yang, Chang-Jiu Li, Microstructure of YSZ coatings deposited by PS-PVD using 45kW shrouded plasma torch, Materials Manufacturing and Processing Technology, 2015, 1532-2475,DOI: 10.1080/10426914.2015.1019100

  84. Guang-Rong Li, Bo-Wen Lv, Guan-Jun Yang, Wei-Xu Zhang, Cheng-Xin Li, Chang-Jiu Li, Relationship Between Lamellar Structure and Elastic Modulus of Thermally Sprayed Thermal Barrier Coatings with Intra-splat Cracks, Journal of Thermal Spray Technology, 2015, 10.1007/s11666-015-0292-5

    2014

  85. Xiao-Tao Luo, Cheng-Xin Li, Fu-Lin Shang, Guan-Jun Yang, Yu-Yue Wang, Chang-Jiu Li, High velocity impact induced microstructure evolution during deposition of cold spray coatings: A review, Surface and Coatings Technology, 2014, 254, 11–20, 10.1016/j.surfcoat.2014.06.00616/j.jpowsour.2013.11.003

  86. Shan-Lin Zhang, Cheng-Xin Li*, Chang-Jiu Li Chemical compatibility and properties of suspension plasma-sprayed SrTiO3-based anodes for intermediate-temperature solid oxide fuel cells，Journal of Power Sources, 2014, 264, 195-205

  87. 56.  Shan-Lin Zhang, Cheng-Xin Li*, Chang-Jiu Li, Plasma-Sprayed YSZ Electrolyte with Improved Inter-Lamellar Bonding for Direct Application to Solid Oxide Fuel Cells, Journal of Fuel Cell Science and Technology, 2014, 11(3), 031005-1-6, doi:10.1115/1.4026143

  88. Ying-Zhen Hu, Cheng-Xin Li*, Guan-Jun Yang, Chang-Jiu Li, Evolution of microstructure during annealing of Mn1.5Co1.5O4 spinel coatings deposited by atmospheric plasma spray, International Journal of Hydrogen Energy, 2014, 39(25), 13844-13851

  89. Xue-Long He, Guan-Jun Yang, Chang-Jiu Li, Cheng-Xin Li, Sheng-Qiang Fan, Room temperature cold sprayed TiO2 scattering layer for high performance and bending resistant plastic-based dye-sensitized solar cells, Journal of Power Sources, 2014, 251, 122–129, 10.1016/j.jpowsour.2013.11.003

  90.  Xue-Long He, Guan-Jun Yang, Chang-Jiu Li, Cheng-Xin Li, Influence of accelerating gas flow rate on the particle cohesion in room temperature cold sprayed scattering layer for plastic-based dye-sensitized solar cells, Applied Surface Science, 288,416–422, 10.1016/j.apsusc.2013.10.049

  91.  Hui Dong, Guan-Jun Yang, Cheng-Xin Li, Xiao-Tao Luo, Chang-Jiu Li, Effect of TGO Thickness on Thermal Cyclic Lifetime and Failure Mode of Plasma-Sprayed TBCs, Journal of American Ceramic Society, 2014, 97(4), 1226–1232, DOI: 10.1111/jace.12868

  92.  Hai-Long Yao, Jun-Hua Ma, Guan-Jun Yang, Xue-Long He, Sheng-Qiang Fan, Cheng-Xin Li, Chang-Jiu Li, Nano-Porous TiO2 Layer Using Ultrafine Nano-Particles for the Blocking Layer in Dye-Sensitized Solar Cells,  Journal of Nanoscience and Nanotechnology,2014, 14(4), 2829-2835, dx.doi.org/10.1166/jnn.2014.8602

  93.  Chang-Jiu Li, Yong Li, Guan-Jun Yang, and Cheng-Xin Li, Evolution of Lamellar Interface Cracks During Isothermal Cyclic Test of Plasma-Sprayed 8YSZ Coating with a Columnar-Structured YSZ Interlayer, Journal of Thermal Spray Technology, 22(8), 1374-1382, December 2013 10.1007/s11666-013-9965-0

  94. Cheng-Xin Li, Zhun-Zhun Wang, Shuai Liu, Chang-Jiu Li,Effect of Gas Pressure on Polarization of SOFC Cathode Prepared by Plasma Spray, Journal of Thermal Spray Technology, 22(5), 2013, 640-645

  95. Shan-Lin Zhang, Cheng-Xin Li*, Chang-Jiu Li, Guan-Jun Yang, Zhi-Hai Han, Scandia-Stabilized ZirconiaElectrolyte with Improved Interlamellar Bonding by High-Velocity Plasma Spraying for High Performance Solid Oxide Fuel Cells, Journal of Power Sources, 2013, 232, 123-131.

  96. Hai-Long Yao, Guan-Jun Yang, Shan Li, Xue-Long He, Sheng-Qiang Fan, Cheng-Xin Li, Chang-Jiu Li, Synergistic effects of high temperature and impact compaction on the nano-TiO2 film for the significant improvement of photovoltaic performance of flexible dye-sensitized solar cells, Electrochimica Acta, 2013, 87, 940–947, doi:10.1016/j.electacta.2012.09.055

  97. Guan-Jun Yang, Chang-Jiu Li, Cheng-Xin Li, Katsuyoshi Kondoh, Akira Ohmori, Improvement of Adhesion and Cohesion in Plasma-Sprayed Ceramic Coatings by Heterogeneous Modification of Nonbonded Lamellar Interface Using High Strength Adhesive Infiltration, Journal of Thermal Spray Technology, 2013, 22(1), 36-47,  DOI: 10.1007/s11666-012-9831-5

  98.   Guan-Jun Yang, Cheng-Xin Li, Shun Hao, Ya-Zhe Xing, Er-Juan Yang, Chang-Jiu Li, Critical bonding temperature for the splat bonding formation during plasma spraying of ceramic materials, Surface and Coatings Technology, 2013, 235, 841–847, doi:10.1016/j.surfcoat.2013.09.010

  99.  Li-Hui Tian, Cheng-Xin Li*, Guan-Jun Yang, Chang-Jiu Li, Effect of TiC addition and high-temperature annealing on the microstructure and electrical conductivity of shrouded-plasma-sprayed FeAl and FeAl/TiC coatings, Journal of Power Sources 2013, 233, 394-400

  100.  Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Development of particle interface bonding in thermal spray coatings: A Review, Journal of thermal spray technology, 2013, 22(2-3), 192-206, 10.1007/s11666-012-9864-9

  101.    Guan-Jun Yang, Pei-Hu Gao, Cheng-Xin Li, Chang-Jiu Li, Simultaneous strengthening and toughening effects in WC-(nanoWC-Co), Scripta Materialia, 2012, Vol.66, 777-780.

  102.    Guan-Jun Yang, Kai-Xing Liao, Chang-Jiu Li, Sheng-Qiang Fan, Cheng-Xin Li, Shan Li, Formation of pore structure and its influence on the mass transport property of vacuum cold sprayed TiO2 coatings using strengthened nanostructured powder , Journal of Thermal Spray Technology, 2012, Vol.21, 505-513

  103.  Guan-Jun Yang, Xu-Dong Xiang, Lu-Kuo Xing, Ding-Jun Li, Chang-Jiu Li, Cheng-Xin Li, Isothermal oxidation behavior of NiCoCrAlTaY coating deposited by high velocity air-fuel spraying, Journal of Thermal Spray Technology, 2012, Vol.21, 391-399

  104.  Chang-Jiu Li, Yong Li, Guan-Jun Yang, Cheng-Xin Li, A novel plasma-sprayed durable thermal barrier coating with the well-bonded YSZ interlayer between porous YSZ and bond coat, Journal of Thermal Spray Technology, 2012, Vol.21, 383-390

  105.   ChengXin Li, GuanJun Yang, ChangJiu Li, Influence of atmospheric plasma-sprayed composite cathode on the performance of solid fuel cells, Rare Metals Materials and Engineering, 2012, 41(S1), 448-452.

  106. Xue-Long He, Mei Liu, Guan-JunYangJ, Sheng-Qiang Fan, Chang-Jiu Li, Cheng-Xin Li, Preparation of flexible Pt counter elctrode on indium-doped tin oxide coated polyethylene naphthalate for dye-sensitized solar cells, Rare Metals Materials and Engineering, 2011, Rare Metals Materials and Engineering, 2012, 41(S1), 464-466

  107.  Guan-Jun Yang, Xiao-Hu Kang, Cheng-Xin Li, Chang-Jiu Li, Influence of deposition temperature on the splat bonding and mechanical properties of plasma-sprayed tungsten coatings, Rare Metals Materials and Engineering, 2012, 41(S1), 394-398

  108.  Li-Hui Tian, Cheng-Xin Li, Guan-Jun Yang, Chang-Jiu Li, Formation of Iron-aluminide Coating through Annealing of Shrouded Plasma-sprayed Iron/aluminum Composite, Rare Metals Materials and Engineering, 2012 , Rare Metals Materials and Engineering,2012, 41(S1), 367-471

  109.  Cheng-Xin Li, Liang-Liang Yun, Yang Zhang, Chang-Jiu Li, Lie-Jin Guo, Microstructure, Performance and Stability of Ni/Al2O3cermet-supported SOFC operating with coal-based syngas produced using supercritical water, International Journal of Hydrogen Energy, 2012, Vol.37, pp.13001-13006 

  110.   Cheng-Xin Li, Shuai Liu, Yang Zhang, Chang-Jiu Li, Characterization of the Microstructure and Electrochemical Behavior of Sm0.7Sr0.3Co3-δCathode Deposited by Solution Precursor Plasma Spraying, International Journal of Hydrogen Energy, 2012, Vol.37, pp.13097-13102

  111. Xiao-Ming Wang, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Microstructure and polarization of La0.8Sr0.2MnO3 cathode deposited by alcohol solution precursor plasma spraying, International Journal of Hydrogen Energy, 2012, Vol.37, pp.13879-12885

  112.    Biao Chen, Chang-Jiu Li, Guan-Jun Yang, Jian-Tao Yao, Hui-Bin Huo, Cheng-Xin Li, Fabrication of Porous Molybdenum by Controlling Spray Particle State, Journal of Thermal Spray Technology, 2012, Vol.21, pp 1032-1045

  113. Tian Lihui, Li Cheng-Xin Li, Li Changjiu, Yang Guanjun, Effect of Dispersed TiC Content on the Microstructure and Thermal Expansion Behavior of Shrouded-Plasma-Sprayed FeAl/TiC Composite Coatings, Journal of Thermal Spray Technology, 2012, 21(3-4), p689-694.( SCI: 544PT)

  114. Shan-Lin Zhang, Cheng-Xin Li*, Chang-Jiu Li, and Guan-Jun Yang, Microstructure and Properties of Porous Ni50Cr50-Al2O3 Cermet Support for Solid Oxide Fuel Cells，Journal of Thermal Spray Technology, 158, 22(2-3), 2012,158-165

  115. Guan-Jun Yang, Hong-Tao Wang, Chang-Jiu Li, Cheng-Xin Li, Effect of annealing on the microstructure and erosion performance of cold-sprayed FeAl intermetallic coatings, Surface and Coatings Technology, 205 (2011) 5502-5509.

  116. Changjiu Li, Yong Li, Lukuo Xing, Guanjun Yang, Chengxin Li, Microstructure Features of Cold-Sprayed NiCoCrAlTaY Coating and its High Temperature Oxidation Behavior, Materials Science Forum, Vol.686, 2011, p.595-602. DOI: 10.4028/www.scientific.net/MSF.686.595

  117.  Guan-Jun Yang, Sheng-Qiang Fan, Chang-Jiu Li, Cheng-Xin Li, Layer-by-layer fabrication of multiple-dye-sensitized TiO2films for dye-sensitized solar cells by vacuum cold spray, Nanoscience and Nanotechnology Letters (NNL), Vol.3(No.4), 2011, 483-486

  118. Xiao-Ming Wang, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Microstructure and electrochemical behavior of La0.8Sr0.2MnO3deposited by solution precursor plasma spraying, Rare metal materials and engineering, 2011, 40(11), p1811-1886

  119.  Xiao-Ming Wang, Cheng-Xin Li, Chang-Jiu Li, and Guan-Jun Yang, Microstructure and electrochemical behavior of a structured electrolyte/LSM-Cathode interface modified by flame spraying for solid oxide fuel cell application, Journal of Thermal Spray Technology, 2010, 19(1-2), p311-316.( SCI: 544PT)

  120.  Yong Li, Chang-Jiu Li, Qiang Zhang, Guan-Jun Yang, Cheng-Xin Li, Influence of TGO composition on the thermal shock lifetime of thermal barrier coatings with cold-sprayed MCrAlY bond coat, Journal of Thermal Spray Technology, 2010, 19(1-2), p168-177.( SCI: 544PT)

  121.  Pei-Hu Gao, Chang-Jiu Li, Guan-Jun Yang, Yi-Gong Li,Cheng-Xin Li, Influence of substrate hardness transition on built-up of nanostructured WC-12Co by cold spraying,Applied Surface Science, 2008, 256(7), p2263-2268. ( SCI: 544PB)

  122. Xiao-Ming Wang, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Effect of microstructures on electrochemical behavior of La0.8Sr0.2MnO3deposited by suspension plasma spraying, International Journal of Hydrogen Energy, 2010, 35(7), p3152-3158. ( SCI: 583QF)

  123.  Cheng-Xin Li, Chang-Jiu Li, Lie-Jin Guo, Effect of composition of NiO/YSZ anode on the polarization characteristics of SOFC fabricated by atmospheric plasma spraying, International Journal of Hydrogen Energy, 2010, 35, p2904-2908. ( SCI: 583QF)

  124.  Cheng-Xin Li, Chang-Jiu Li, Lie-Jin Guo, Performance of a Ni/Al2O3cermet-supported tubular solid oxide fuel cell operating with biomass-based syngas through supercritical water, International Journal of Hydrogen Energy, 2010, 35, p2964-2969.( SCI: 583QF)

  125. Chang-Jiu Li, Xin-Kun Suo, Guan-Jun Yang,Cheng-Xin Li,Influence of annealing on the microstructure and wear performance of diamond/NiCrAl composite coating deposited through cold spraying, Materials Science Forum, 2010, 638-642, p894-899. ( SCI: BQH93)

  126. Qiang Zhang, Chang-Jiu Li, Guan-Jun Yang,Cheng-Xin Li,Effect of powder structure on microstructure of the oxide scales formed on cold-sprayed NiCrAlY coatings, International Journal of Modern Phuysics B, 2010, 24(15-16), p3041-3046. ( SCI:654UT)

  127.  Yong Li, Chang-Jiu Li, Guan-Jun Yang,Cheng-Xin Li, Relationg between microstructure and thermal conductivity of plasma-sprayed 8YSZ coating, International Journal of Modern Phuysics B, 2010, 24(15-16), p3017-3022. ( SCI:654UT)

  128. Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Development of a Ni/Al2O3cermet-supported tubular solid oxide fuel cell assembled with different functional layers by atmospheric plasma-spraying, Journal of Thermal Spray Technology, 2009, 18(1), p83-89.( SCI: 403KG)

  129. Gao Min, Li Chang-Jiu, Li Cheng-Xin, Yang Guan-Jun, Fan, Sheng-Qiang, Microstructure, oxygen stoichiometry and electrical conductivity of flame-sprayed Sm0.7Sr0.3CoO3-delta, Journal of Power Sources, 2009, 191 (2), p275-279.( SCI: 454HM)

  130.  Chao Zhang, Abdoul-Fatah Kanta, Cheng-Xin Li,Chang-Jiu Li, Marie-Pierre Planche, Hanlin Liao, Christain Coddet, Effect of in-flight particle characteristics on the coating properties of atmospheric plasma-sprayed 8 mol% Y2O3-ZrO2electrolyte coating studying by artificial neural networks, Surface & Coatings Technology, 2009, 204, p463-469.( SCI: 513QH)

  131.  Cheng-Xin Li, Ying-Xin Xie, Chang-Jiu Li, Guan-Jun Yang，Characterization of atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte, Journal of Power Sources, Vol,184, Issue: 2, 2008, P.370-374

  132.  Ya-Zhe Xing, Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Influence of through-lamella grain growth on ionic conductivity of plasma-sprayed yttria stabilized zirconia as an electrolyte in solid oxide fuel cells, Journal of Power Sources, 2008, 176, p31-38.( SCI: 257UE)

  133. Ya-Zhe Xing, Cheng-Xin Li, Chang-Jiu Li, Hui-Guo Long, Ying-Xin Xie, Microstructure Development of Plasma Sprayed Yttria-Stabilized Zirconia and its Effect on Electrical Conductivity, Solid State Ionics, Solid State Ionics, Volume: 179, Issue: 27-32, 2008, P.1483-1485

  134. 103.  Chao Zhang, Chang-Jiu Li, Hanlin Liao, Manie-Pierre Planche,Cheng-Xin Li, Christian Coddet, Effect of in-flight particle velocity on the performance of plasma-sprayed YSZ electrolyte coating for solid oxide fuel cells, Surface & Coatings Technology, 2008, 202(12), p2654-2660.( SCI: 279PT)

  135. Qiang Zhang, Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Siu-Ching Lui, Study of oxidation behavior of nanostructured NiCrAlY bond coatings deposited by cold spraying, Surface & Coatings Technology, 2008, 202(14), p3378-3384.( SCI: 286TA)

  136. Sheng-Qiang Fan, Chang-Jiu Li, Guan-Jun Yang, Jin-Cheng Gao, Ling-Zi Zhang, Cheng-Xin Li, Yu-Yue Wang, Room-temperature deposition of nano-TiO2coating by vacuum cold spraying using TiCl4-agglomerated nano-TiO2powder for flexible dye-sensitized solar cell, Key Engineering Materials, 2008, 373-374, p742-745.( SCI: BHS23)

  137. Min Gao, Cheng-Xin Li, Ming-De Wang, Hua-Lei Wang, Chang-Jiu Li, Influence of the surface roughness of plasma-sprayed YSZ on LSM cathode polarization in solid oxide fuel cells, Key Engineering Materials, 2008, 373-374, p641-644.( SCI: BHS23)

  138. Hong-Tao Wang, Guan-Jun Yang, Chang-Jiu Li,Cheng-Xin Li, Effect of annealing treatment on the structure and microhardness of cold-sprayed nanostructured FeAl/WC composite coatings, Key Engineering Materials, 2008, 373-374, p73-76.( SCI: BHS23)

  139. Ya-Zhe Xing, Yong Li, Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Influence of substrate temperature on microcracks formation in plasma-sprayed yttria-stabilized zirconia splats, Key Engineering Materials, 2008, 373-374, p69-72.( SCI: BHS23)

  140.  Chao Zhang,Wen-Ya Li, Manie-Pierre Planche,Cheng-Xin Li,Hanlin Liao, Chang-Jiu Li, Christian Coddet, Study on gas permeation behaviour through atmospheric plasma-sprayed yttria stabilized zirconia coating, Surface & Coatings Technology, 2008, 202 (20),p5055-5061.( SCI: 331YL)

  141. Chao Zhang, GaZhang G, Susanne Leparoux, Hanlin Liao, Cheng-Xin Li, Chang-Jiu Li, Christian Coddet,Microwave sintering of plasma-sprayed yttria stabilized zirconia electrolyte coating, Journal of the European Ceramic Society, 2008, 28(13), p2529-2538.( SCI: 337JM)

  142. Chang-Jiu Li, Cheng-Xin Li, Hui-Guo Long, Ya-Zhe Xing, Guan-Jun Yang, Performance of tubular solid oxide fuel cell assembled with plasma-sprayed Sc2O3-ZrO2electrolyte, Solid State Ionics, 2008,179, p1575-1578.( SCI: 349JD)

  143. Ya-Zhe Xing, Cheng-Xin Li,Chang-Jiu Li , Hui-Guo Long, Ying-Xin Xie, Microstructure development of plasma-sprayed yttria-stabilized zirconia and its effect on electrical conductivity, Solid State Ionics, 2008, 179, p1483-1485.( SCI: 349JD)

  144. Hong-Tao Wang, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al2O3intermetallic composite coating, Vacuum, 2008, 83(1), p146-152. ( SCI: 358SO)

  145. Cheng-Xin Li, Ying-Xin Xie, Chang-Jiu Li, Guan-Jun Yang, Characterization of atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3electrolyte, Journal of Power Sources, 2008, 184, p370-374.( SCI: 358AR)

  146. Pei-Hu Gao, Chang-Jiu Li, Guan-Jun Yang, Yi-Gong Li, Cheng-Xin Li, Influence of substrate hardness on deposition behavior of single porous WC-12Co particle in cold spraying, Surface & Coatings Technology, 203(3-4), p384-390. ( SCI: 378YH) 

  147. Qiang Zhang, Chang-Jiu Li, Yong Li, Shao-Ling Zhang, Xiu-Ru Wang, Guan-Jun Yang, Cheng-Xin Li, Thermal failure of nanostructured thermal barrier coatings with cold-sprayed nanostructured NiCrAlY bond coat, Journal of Thermal Spray Technology, 2008, 17(5-6), p838-845. ( SCI: 379QQ)

  148. 117.  Guan-Jun Yang, Chang-Jiu Li, Shi-Jun Zhang, Cheng-Xin Li, High-temperature erosion of HVOF sprayed Cr3C2-NiCr soating and mild steel for boiler tubes, Journal of Thermal Spray Technology, 2008, 17(5-6), p782-787. ( SCI: 379QQ)

  149. 118.  Pei-Hu Gao, Yi-Gong Li, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li, Influence of powder porous structure on the deposition behavior of cold-sprayed WC-12Co coatings, Journal of Thermal Spray Technology, 2008, 17(5-6), p742-749. ( SCI: 379QQ)

  150. 119.  Zhang Q, Chang-Jiu Li, Xiu-Ru Wang, Zhi-Liang Ren, Li, Cheng-Xin Li, Guan-Jun Yang, Formation of NiAl intermetallic compound by cold spraying of ball-milled Ni/Al alloy powder through postannealing treatment, Journal of Thermal Spray Technology, 2008, 17(5-6), p715-720. ( SCI: 379QQ)

  151. 120.  Ya-Zhe Xing, Chang-Jiu Li, Qiang Zhang, Cheng-Xin Li, and Guan-Jun Yang, Influence of microstructure on the ionic conductivity of plasma-sprayed yttria-stabilized zirconia deposits, Journal of American Ceramic Society, 2008, 91(12), p3931-3936. ( SCI: 384AC)

  152. 121.  Hong-Tao Wang, Chang-Jiu Li, Guan-Jun Yang, Cheng-Xin Li,Cold spraying of Fe/Al powder mixture: Coating characteristics and influence of heat treatment on the phase structure, Applied Surface Science, 2008, 255(5), p2538-2544.( SCI: 447NJ)

  153. 122.  Chao Zhang, Chang-Jiu Li, Ga Zhang, Xian-Jin Ning, Cheng-Xin Li,Hanlin Liao, Christain Coddet, Ionic conductivity and its temperature dependence of atmospheric plasma-sprayed yttria stabilized zirconia electrolyte, Materials Science and Engineering B, 2007, 137(1-3), p24-30.(SCI: 144LQ)

  154. 123.  Guan-Jun Yang, Chang-Jiu Li, Yu-Yue Wang, Cheng-Xin Li, Dominant microstructural feature over photocatalytic activity of high velocity oxy-fuel sprayed TiO2coating, Surface & Coatings Technology, 2007, 202(1), P63-68. (SCI: 230QA)

  155. 124.  Chang-Jiu Li, Guan-Jun Yang, Pei-Hu Gao, Jian Ma, Yu-Yue Wang, Cheng-Xin Li, Characterization of nanostructured WC-Co deposited by cold spraying, Journal of Thermal Spray Technology, 2007, 16(5-6), P1011-1020. (SCI: 246XN)

  156. 125.  Chao Zhang, Wen-Ya Li, Hanlin Liao, Chang-Jiu Li, Cheng-Xin Li, Christian Coddet, Microstructure and electrical conductivity of atmospheric plasma-sprayed LSM/YSZ composite cathode materials, Journal of thermal spray technology, 2007, 16(5-6), p1005-1010.(SCI: 246XN)

  157. 126.  Guan-Jun Yang, Chang-Jiu Li, Xin-Chun Huang, Cheng-Xin Li, Yu-Yue Wang, Influence of silver doping on photocatalytic activity of liquid-flame-sprayed-nanostructured TiO2coating, Journal of thermal spray technology, 2007, 16(5-6), p881-885.(SCI: 246XN)

  158. 127.  Guan-Jun Yang, Chang-Jiu Li, Sheng-Qiang Fan, Yu-Yue Wang,Cheng-Xin Li, Influence of annealing on photocatalytic performance and adhesion of vacuum cold-sprayed nanostructured TiO2coating, Journal of thermal spray technology, 2007, 16(5-6), p873-880. (SCI: 246XN)

  159.  Hong-Tao Wang, Chang-Jiu Li, Guan-Jun Yang,Cheng-Xin Li, Qiang Zhang, Wen-Ya Li, Microstructural characterization of cold-sprayed nanostructured FeAl intermetallic compound coating and its ball-milled feedstock powders, Journal of thermal spray technology, 2007, 16(5-6), p669-676. (SCI: 246XN)

  160. Xian-Jing Ning, Cheng-Xin. Li, Chang-Jiu Li, Guan-Jun Yang, Modification of microstructure and electrical conductivity of plasma-sprayed YSZ deposit through post-densification process, Materials Science and Engineering A , 2006, 428(1-2), p98-105. (SCI: 068UF)

  161. Sheng-Qiang Fan, Chang-jiu Li, Cheng-Xin Li, Guang-Jian Liu, Guan-Jun Yang，Ling-Zi Zhang, Preliminary study of performance of dye-sensitized solar cell of nano-TiO2coating deposited by vacuum cold spraying, Materials Transactions, 2006, 47(7), p1703-1709. (SCI: 082GP)

  162.  Chang-jiu Li, Guan-Jun Yang，Yu-Yue Wang , Cheng-Xin Li,Fu-Xing Ye, Ohmori, Akira Ohmori, Phase formation during deposition of TiO2coatings through high velocity oxy-fuel spraying, Materials Transactions, 2006, 47(7), p1690-1696. (SCI: 082GP)

  163.  Cheng-Xin Li, Chang-Jiu Li, Min Gao, Wei Zhou, Guan-jun Yang, Yu-yue Wang, Characterization of the microstructure and electrical conductivity of plasma-sprayed La0.5Sr0.5CoO3coating, Materials Transactions, 47(7) (2006), 1690-1696. (SCI: 082GP)

  164. Xian-Jin Ning, Cheng-Xin Li, Chang-Jiu Li, Guan-Jun Yang, Effect of powder structure on microstructure and electrical properties of plasma-sprayed 4.5 mol% YSZ coating, Vacuum, 2006, 80(11-12), p1261-1265. (SCI: 087PD)

  165.  Cheng-Xin Li, Chang-Jiu Li, Hui-Guo Long, Ya-Zhe Xing, Xin-Jin Ning, Chao Zhang, Han-Lin Liao, Christain Coddet, Characterization of atmospheric plasma-sprayed Sc2O3-ZrO2electrolyte coating. Solid State Ionics, 2006, 177, p2149-2153. (SCI: 112VH)

  166. Chang-Jiu Li, Cheng-Xin Li, Ya-Zhe Xing, Min Gao, Guan-Jun Yang, Effect of YSZ electrolyte thickness on the characteristics of plasma-sprayed cermet supported tubular SOFC, Solid State Ionics, 2006, 177, p2065-2069. (SCI: 112VH)

  167. Chang-Jiu Li, Cheng-Xin Li, Ya-Zhe Xing, Ying-Xin Xie, Hui-Guo. Long, Influence of the characteristics of stabilized zirconia electrolyte on the performance of cermet supported tubular SOFCs, Rare Metals, 2006, 25, p273-279. (SCI: 118ND)

  168.  Chao Zhang, Han-Lin Liao, Chang-Jiu Li, Wen-Ya Li, Ga Zhang, Cheng-Xin Li, Xian-Jin Ning, Christain Coddet, Characterization of YSZ electrolyte deposit by atmospheric plasma spraying and low pressure plasma spraying, Journal of Thermal Spray Technology, 2006, 15(4), p598-603. (SCI: 118ZC)

  169.  Guan-Jun Yang, Chang-Jiu Li, Cheng-Xin Li, Yu-Yue Wang, Xin-Chun Huang,  Effect of Cu2+doping on photocatalytic performance of liquid flame sprayed TiO2coatings, Journal of Thermal Spray Technology, 2006, 15(4), p582-586. (SCI: 118ZC)

  170.  Wen-Ya Li, Chang-Jiu Li, Hong-Tao Wang, Cheng-Xin Li, Hee-Seon Bang, Measurement and numerical simulation of particle velocity in cold spraying, Journal of Thermal Spray Technology, 2006, 15(4), p559-562. (SCI: 118ZC)

  171. Chang-Jiu Li, Cheng-Xin Li, Guan-Jun Yang, Yu-Yue Wang, Examination of substrate surface melting-induced splashing during splat formation in plasma spraying, Journal of Thermal Spray Technology, 2006, 15(4), p717-724. (SCI: 118ZC)

  172. Sheng-Qiang Fan, Guan-Jun Yang, Chang-Jiu Li, Guang-Jian Liu, Cheng-Xin Li, Ling-Zi Zhang, Characterization of microstructure of nano-TiO2coating deposited by vacuum cold spraying, Journal of Thermal Spray Technology, 2006, 15(4), p513-517. (SCI: 118ZC)

  173.   Chang-jiu Li, Xian-jin Ning, Cheng-Xin Li, Effect of Densification process on the properties of plasma-sprayed YSZ electrolyte coatings for solid oxide fuel cell, Surface & Coating Technology, 2005, 190, p60-64. (SCI: 873TZ)

  174. Chang-jiu Li, Cheng-Xin Li, Min Wang, Effect of spray parameters on the electrical conductivity of plasma-sprayed La1-xSrxMnO3coating for the cathode of SOFCs, Surface & Coating Technology, 2005, 198, p278-282. (SCI: 944HZ)

  175. Chang-Jiu Li,Cheng-Xin. Li, Xian-Jin. Ning. Performance of YSZ electrolyte layer deposited by atmospheric plasma spraying for cermet supported tubular SOFC, Vacuum, 2004, 73, p699-703. (SCI: 813TH)

  176.  Chang-jiu Li, Tao Wu, Cheng-Xin Li. Effect of spray particle trajectory on the measurement signal of particle parameters based on thermal radiation, Journal of Thermal Spray Technology, 2003, 12(1), p80-94. (SCI: 658CX)

  177.   Tao Wu, Cheng-Xin Li, Chang-jiu Li. Effect of optical system design on signal characteristics and level during the simultaneous measurement of state parameters of thermally sprayed particle, 3rd International Conference on Surface Engineering, Oct 10-13, 2002 Chengdu, Contributions of Surface Engineering to Modern Manufacturing and Remanufacturing, 2002, p182-187. (SCI: BV99R)

  178. 李成新, 宁先进,李长久, 等离子喷涂结合致密化工艺制备SOFC电解质层, 电源技术, 2004, 28(9), p565-569.
  179. 李成新, 李长久,宁先进, 工作条件对热喷涂制备的SOFC输出特性的影响, 中国稀土学报, 2004, 22, p39-42.
  180.  李成新, 邢亚哲,杨冠军, 李长久,阳极组分对热喷涂制备SOFC输出特性的影响, 中国有色金属学报, 2005, 15(9), p1411-1415.
  181. 宁先进, 李成新,杨冠军, 李长久,等离子喷涂条件对YSZ涂层导电性能的影响, 中国有色金属学报, 2005, 15-s1, p210-214.
  182. 李长久, 李成新,杨冠军, 等离子喷涂陶瓷涂层及其在SOFC制造中的应用, 武汉理工大学学报, 2006, 28, p627-634.
  183.  李长久, 杨冠军,高培虎, 马剑,王豫跃, 李成新,  冷喷涂制备纳米结构超硬WC-Co涂层及其结构表征, 机械工人(热加工), 2007, 5, p24-27.
  184. 张强, 杨冠军,李长久, 李成新,冷喷涂纳米结构NiCrAlY涂层在氩气气氛中的氧化行为, 中国表面工程, 2010, 21(6), p5-9.
  185.  刘长华，李成新，李长久，杨冠军，管状SOFC用Ni-Al2O3支撑层的组织结构与气密性研究，电源技术，2009, 33(12), 1075-1077
  186. .  田立辉, 李长久,李成新, 杨冠军,大气等离子喷涂球磨Fe-Al合金制备FeAl涂层及其结构表征, 中国表面工程, 2010, 23(2), p20-25  
  187.   高敏, 李长久,李成新, 范圣强,喷涂条件与热处理对La0.5Sr0.5CoO3-δ涂层含氧量的影响, 西安交通大学学报, 2010, 44(3), p115-119.

 

发明专利

  1.   李长久, 李成新, 杨冠军,等. 一种管状高温固体氧化物燃料电池的制备方法: CN1215593C[P]. 2003.
  2.  李长久, 李成新, 王豫跃,等. 一种管状高温固体氧化物燃料电池单电池的结构: CN1438723 A[P].2005
  3.  李长久, 李成新, 杨冠军,等. 一种固体氧化物燃料电池电解质层的制造方法:, CN100359739C[P]. 2008.
  4.  李长久, 李成新, 王豫跃,等. 一种管状高温固体氧化物燃料电池单电池的结构: CN1438723 A[P].2008
  5.  李长久, 李成新, 杨冠军. 管状固体氧化物燃料电池堆结构及其预热方法:, CN102306818B[P]. 2013.
  6. 李长久, 李成新, 杨冠军. 一种SOFC电解质表面微凸结构的制备方法及其产品:, CN102412408B[P]. 2014.
  7. 李长久, 李成新, 杨冠军,等. 基于液相过滤的低压等离子喷涂制备柱状陶瓷涂层的方法:, CN104404436B[P]. 2017.
  8. 李长久, 李成新, 杨冠军,等. 一种大幅度提高飞行粒子气化的低功率等离子喷涂的方法:, CN104404437B[P]. 2017.
  9. 李成新, 谭香,付斯林, 张林杰,雒晓涛, 杨冠军,李长久, 双层复合板对焊焊接方法, CN201610566179.6，2016
  10.  李成新, 马凯, 张山林,等. 一种可控气氛冷喷涂制备铜薄膜的方法:. CN201610864919.4，2016
  11.  李成新, 刘森辉, 付斯林,等. 一种三步法四界面体系的异质材料接头结构及其连接方法:.CN201610938227.X,2016
  12. 李成新, 高九涛, 王岳鹏,等. 一种可拆换式板状电池串联电池堆结构:, CN106410251B[P]. 2019.
  13. 李成新, 高九涛, 王岳鹏,等. 一种自密封平板固体氧化燃料电池的连接体及制备方法:, CN106549172B[P]. 2019.
  14. 李成新, 付斯林, 谭香,等. 基于界面钉扎作用提高异质金属接头强度的冷喷焊接方法:, CN106756979A[P].
  15. 李成新, 马凯, 刘伊,等. 一种用于水下维修的喷涂系统与方法:, CN108940649A[P]. 2018.
  16. 李成新, 刘伊, 马凯,等. 一种同轴激光复合式水下喷涂装置:, CN109174487A[P]. 2019.
  17. 李成新, 刘森辉, 张惠宇,等. 一种大气下气液共沉积热障涂层及其快速制备方法:. CN201910774514.5,2019
  18. 李成新, 刘森辉, 张惠宇,等. 一种高密度贯穿型垂直裂纹热障涂层及其快速制备方法:, CN110423972A[P]. 2019.
  19. 李成新, 周菊, 马凯,等. 材料表面高硬度耐磨复合层的加工方法和金属基复合材料:, CN109943842A[P]. 2019.
  20. 李长久, 李成新, 杨冠军,等. 一种激光复合热喷涂系统和方法:CN201910519659.0[P],2019
  21. 李成新, 李岩, 刘伊,等. 一种用于超高速激光熔覆的环形同轴送粉装置:, CN110055528A[P]. 2019.
  22. 李成新, 高九涛, 王岳鹏, 等, 一种自密封平板状固体氧化物燃料电池的制备方法；CN106571475B
  23. 李成新, 高九涛, 王岳鹏,等, 一种自密封平板状固体氧化物燃料电池/电解池的结构; CN106374120A
  24. 李长久, 董盺远, 李成新. 一种大气氛围下金属合金涂层的制备方法和系统:, CN109338264B[P]. 2020.
  25. 李成新, 刘伊, 黄小芳,等. 一种同步送粉水下激光熔覆制备覆层的方法以及装置:, CN111118494A[P]. 2020.
  26. 李成新, 康思远, 李甲鸿,等. 固体氧化物燃料电池/电解池及电池堆结构:, CN111403767A[P]. 2020.
  27. 李成新, 李甲鸿, 康思远,等. 一体化结构,电池/电解池及电池堆的制备方法:, CN111403768A[P]. 2020.
  28. 李成新, 高九涛, 冯琪雁,等. 一种阴极汇流层材料及汇流层的制备方法:, CN111509261A[P]. 2020.
  29. 刘森辉, 徐庆龙, 李长久, 李成新. 一种强化学吸附界面热障涂层粘结层材料及其制备方法:, CN111334797A[P]. 2020.
  30. 李成新, 康思远, 李甲鸿,等. 一种扁管型固体氧化物燃料电池的电池堆结构:, CN111403765A[P]. 2020.
  31. 李成新, 黄小芳, 刘伊,等. 一种同步矩形光斑送粉装置:. CN202010949802.2[P].2020
  32. 李成新, 李甲鸿, 康思远,等. 金属薄壁管支撑型微管固体氧化物燃料电池,电池堆结构:. CN202010247478.X[P].2020
  33. 李成新，臧绪丰，冯琪雁，一种固体氧化物燃料电堆及其系统和应用,CN113285088A[P].2021
  34. 李长久, 陈旭, 张山林, 等, 双层连接极串联管状固体氧化物燃料电池的制备方法，CN110890570A[P]2021
  35. 李长久, 陈旭, 张山林, 等, 一种双层连接极串联的管状固体氧化物燃料电池，CN110890571A[P].2021
  36. 李成新，李娇苏，康思远，一种预压辅助烧结制备电解质薄膜的方法、电池/电解池.CN110890571A[P].2021
  37. 李成新，李延安，李娇苏，等，一种连续生产电池/电解池的方法、系统及电池/电解池,CN113161572A[P].2021
  38. 李成新, 康思远, 李甲鸿, 金属扁管支撑体、电池/电解池、电池堆结构,CN111403762A[P]2021
  39. 李成新, 康思远, 李甲鸿, 一端自密封陶瓷扁管支撑型电池/电解池及电池堆结构, CN111416133A[P]2021

论文期刊

没有找到条目。