-----代表性论文-----

Zheng W, Ma L, Pei S, et al. Numerical assessment of transition in cutting mode and its effect on roughness creation[J]. International Journal of Mechanical Sciences, 2024, 261: 108666. https://doi.org/10.1016/j.ijmecsci.2023.108666

Xu Y, Cao H, Shi J, et al. Vibration response analysis of rotor system coupled with a novel 4-DOF SFD hydrodynamic model considering the influence of rotational displacement[J]. Tribology International, 2024, 194: 109501. https://doi.org/10.1016/j.triboint.2024.109501

Xu Y, Cao H, Shi J, et al. A comprehensive multi-parameter optimization method of squeeze film damper-rotor system using hunter-prey optimization algorithm[J]. Tribology International, 2024, 194: 109538. https://doi.org/10.1016/j.triboint.2024.109538

Zheng W, Aghababaei R, Hong J, et al. An efficient method for transient response of rotor systems based on squeeze film damper[J]. Tribology International, 2023, 183: 108277. https://doi.org/10.1016/j.triboint.2023.108277

Zheng W, Pei S, Zhang Q, et al. Experimental and theoretical results of the performance of controllable clearance squeeze film damper on reducing the critical amplitude[J]. Tribology International, 2022, 166: 107155. https://doi.org/10.1016/j.triboint.2021.107155

王晓红, 裴世源, 常山. 划痕对椭圆瓦轴承润滑特性及转子稳定性的影响[J]. 机械工程学报, 2021, 57(11): 256-264.

王晓红,常山,裴世源. 径向流体支点可倾瓦轴承润滑特性分析[J]. 西安交通大学学报,2021,55(5):65-72,82. DOI:10.7652/xjtuxb202105008.

张庆山,裴世源,洪军.考虑螺栓松脱特性的航空发动机转子动力学研究[J].风机技术,2021,63(1):56-64

魏峥, 李硕, 裴世源, 等. 轴线倾斜对推力锥润滑特性的影响及修形参数优化研究[J]. Lubrication Engineering (0254-0150), 2023, 48(10).

公平,胡振辉,张庆山,等.涡轮增压器超高速轴承-转子动力学建模及模态参数识别[J].风机技术, 2023, 65(1):57-63.

张庆山, 胡振辉, 洪军, 等. 航空发动机高压转子连接部件松动故障动力学特性研究[J]. 航空动力学报, 2024, 39(3): 20210395-1-20210395-16.

郑文斌.瓦面划痕引发斜平面推力轴承特性退化的作用机理[J].风机技术,2021,(2):48-58.

裴世源, 郑文斌, 洪军. 剪切稀化对径向滑动轴承润滑特性的影响[J]. 机械工程学报, 2020, 56(1): 100-109.

裴世源, 牛红军, 洪军. 快堆钠泵动静压导轴承润滑特性分析[J]. 机械工程学报, 2020, 56(21): 29-37.

李超, 裴世源, 郑文斌, 江瑞龙, 徐华, 洪军. 表面织构对错位瓦轴承静动特性的影响[J]. 润滑与密封, 2020, 45(5): 18-24.

-----专利与软著-----