一、发表论文情况（第一/通讯作者）： 

1. Jian YX*, Liu Yakun, Qi hongjun, et al. Effects of scanning speed on the microstructure, hardness and corrosion properties of high-speed laser cladding Fe-based stainless coatings [J]. Journal of Materials Research and Technology, 2024, 29: 3380-3392. (SCI)
2. Yu Wang, Jian YX*, Rongbo Xu et al. Microstructure Evolution and Mechanical Behaviors of P92 Steel Welded Joint with Repetitive Post Tempering [J]. Advanced Engineering Materials, 2023, 2300018. (SCI)
3. Jian YX*, Hongjun Qi, Zhang JY, et al. Effects of trace Si addition on the microstructure evolution and mechanical properties of MoAlB ceramic [J]. Journal of Alloys and Compounds, 2023, 941:168873. (SCI)
4. Cao Z, Jian YX*, Zhao ZS, et al. On the dissolution and enhancement mechanisms of Cr doping in Mo2FeB2-based cermets [J]. Ceramics International, 2023, 49:6139-6148. (SCI)
5. Cao Z, Jian YX*, Zhao ZS, et al. Effect of V doping on the microstructure and mechanical properties of Mo2FeB2-based cermets and investigation on the enhancement mechanism [J]. Journal of Alloys and Compounds, 2023, 931:167545. (SCI)
6. Cao Z, Jian YX*, Zhao Zhongshuai, et al. On the reaction mechanism of Mo2FeB2-based cermets and wear transition induced by self-lubricating tribo-oxide layer [J]. International Journal of Refractory Metals and Hard Materials, 2023, 110:106012. (SCI)
7. Yang Z, Jian YX*, Chen Z et al. Microstructure, hardness and slurry erosion-wear behaviors of high-speed laser cladding Stellite 6 coatings prepared by the inside-beam powder feeding method [J]. Journal of Materials Research and Technology, 2022, 19:2596-2610. (SCI)
8. Cao Z, Jian YX*, Huang ZF, et al. Dual effects of Cr doping on the high-temperature oxidation behavior of Mo2FeB2-based cermets [J]. Corrosion Science, 2022, 204:110358. (SCI)
9. Jian YX*, Hongjun Qi, Huang ZF, et al. Preparation, microstructure and mechanical properties of MoAlB-0.15% Si ceramics with superior strength and toughness [J]. Ceramics International, 2022, 48: 1567–1573. (SCI)
10. Jian YX*, Ning HY, Huang ZF, et al. Three-body abrasive wear behaviors and mechanism analysis of Fe-B-C cast alloys with various Mn contents [J]. Journal of Materials Research and Technology, 2021, 14:1301-1311. (SCI)
11. Cao Z, Jian YX*, Huang ZF, et al. High-temperature cyclic oxidation behavior and mechanism of Mo2FeB2-based cermets with various boron contents [J]. Corrosion Science, 2021, 190:109665. (SCI)
12. Jian YX*, Huang ZF, Wang Y, et al. Solidification process, microstructure, and mechanical properties of Cr-doped high boron Fe-based alloy [J]. Materials Chemistry and Physics, 2021, 267: 124592. (SCI)
13. Zhang JY, Jian YX*, Zhao XZ, et al. The tribological behavior of a surface-nanocrystallized magnesium alloy AZ31 sheet after ultrasonic shot peening treatment [J]. Journal of Magnesium and Alloys, 2021, 9:1187-1200. (SCI)
14. Jian YX*, Huang ZF, Xing JD, et al. Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation [J]. Materials, 2020, 13:4221. (SCI)
15. Jian YX*, Huang ZF, Liu XT, et al. Microstructure, mechanical properties and toughening mechanism of directional Fe2B crystal in Fe-B alloy with trace Cr addition [J]. Journal of Materials Science & Technology, 57 (2020) 172-179. (SCI)
16. Shen YB, Huang ZF, Zhang L, Li KM, Cao Z, Xiao P, Jian YX*. Sintering Mechanism, Microstructure Evolution, and Mechanical Properties of Ti-Added Mo2FeB2-Based Cermets [J]. Materials, 2020, 13(8):1889.(SCI)
17. Shen YB, Huang ZF, Xiao P, Zhang L, Li KM, Cao Z, Jian YX*. Sintering mechanism, microstructure evolution and nanomechanical properties of Cr-added Mo2FeB2 based cermets [J]. Ceramics International, 2020, 46(10):15482-15491. (SCI)
18. Jian YX*, Xing JD, Huang ZF, et al. Quantitative characterization of the wear interactions between the boride and metallic matrix in Fe-3.0 wt% B duplex alloy[J]. Wear, 2019: 203021. (SCI)
19. Zhang L, Huang ZF, Liu YZ, Jian YX*, et al. Effect of Ni content on the microstructure, mechanical properties and erosive wear of Mo2NiB2–Ni cermets[J]. Ceramics International, 2019, 45(16): 19695-19703. (SCI)
20. Zhang L, Huang ZF, Jian YX*, et al. High-temperature compressive properties and tribological behaviour of Mo2NiB2–Ni cermets[J]. Ceramics International, 2019, 45(15): 18413-18421. (SCI)
21. Chen Z, Bao C, Wu G, Jian YX*, et al. Effects of YAl2 reinforced particles on the tribological properties of LA143 alloy under dry sliding condition[J]. Wear, 2019, 438: 203077. (SCI)
22. Jian YX, Huang ZF, Xing JD, et al. Phase stability, mechanical properties and electronic structures of Ti-Al binary compounds by first principles calculations[J]. Materials Chemistry and Physics, 2019, 221: 311-321. (SCI)
23. Jian YX, Huang ZF, Xing JD, et al. Investigations on the mechanical properties and three-body wear behaviors of single Fe2B bulks with different chromium additions[J]. Wear, 2019, 418: 273-280. (SCI)
24. Jian YX*, Huang ZF, Liu XT, et al. Comparative investigation on the stability, electronic structures and mechanical properties of Mo2FeB2 and Mo2NiB2 ternary borides by first-principles calculations[J]. Results in Physics, 2019, 15: 102698.
25. Zhang L, Huang ZF, Liu YZ, Jian YX*, et al. Effects of Mechanical Ball Milling Time on the Microstructure and Mechanical Properties of Mo2NiB2-Ni Cermets[J]. Materials, 2019, 12(12): 1926.
26. Jian YX, Huang ZF, Xing JD, et al. Effects of chromium on the morphology and mechanical properties of Fe2B intermetallic in Fe-3.0 B alloy[J]. Journal of Materials Science, 2018, 53(7): 5329-5338. (SCI)
27. Jian YX, Huang ZF, Xing JD, et al. Effect of molybdenum addition on mechanical properties of oriented bulk Fe2B crystal[J]. Journal of Materials Research, 2017, 32(9): 1718-1726. (SCI)
28. Jian YX, Huang ZF, Xing JD, et al. Effects of chromium additions on the three-body abrasive wear behavior of Fe-3.0 wt% B alloy[J]. Wear, 2017, 378: 165-173. (SCI)
29. Jian YX, Huang ZF, Xing JD, et al. Effects of Mn addition on the two-body abrasive wear behavior of Fe-3.0 wt% B alloy[J]. Tribology International, 2016, 103: 243-251. (SCI)
30. Jian YX, Huang ZF, Xing JD, et al. Investigation on two-body abrasive wear behavior and mechanism of Fe–3.0 wt% B cast alloy with different chromium content[J]. Wear, 2016, 362: 68-77. (SCI)
31. Jian YX, Huang ZF, Xing JD, et al. Effect of improving Fe2B toughness by chromium addition on the two-body abrasive wear behavior of Fe–3.0 wt% B cast alloy[J]. Tribology International, 2016, 101: 331-339. (SCI)
32. Jian YX, Huang ZF, Xing JD, et al. Effects of chromium addition on fracture toughness and hardness of oriented bulk Fe₂B crystals[J]. Materials Characterization, 2015, 110: 138-144.

33. 刘亚坤，坚永鑫*，孔寒冰等. 微量 Y 和 Si 掺杂对 MoAlB 陶瓷显微组织和力学性能的影响[J]. 粉末冶金材料科学与工程, 2023, 28(4): 329-337.

34. 王瑜，坚永鑫*，胡鹏飞等. 多次热处理对超超临界锅炉用P92钢显微组织及硬度的影响[J]. 铸造技术, 2023, 44(11): 997-1003.

35. 王瑜，坚永鑫*，党文静等. 热处理工艺对 Fe-Si-Mn-Cr 低合金耐磨钢组织及力学性能的影响[J]. 热加工工艺, 2023.

     

36. Jian YX, Huang ZF, Xing JD. Effects of Cr on the morphology and toughness of Fe2B in Fe-3.0 wt% B alloy. International Union of Materials Research Societies-The 15th International Conference on Advanced Materials, Kyoto, Japan, 2017.
37. 坚永鑫, 皇志富, 邢建东. Cr掺杂对铸造Fe-B合金中Fe2B断裂韧性的影响. 第十四届全国耐磨材料大会：中国洛阳, 2015.

二、申请/授权专利情况 

[1]一种P92钢的脉冲时效强化方法及强化处理的P92钢, ZL202210178327.2，2022-12-09.

[2]一种高强度高熵合金粘结相纳米级硬质合金及其制备方法，202310365912.8, 2023-4-7.

[3]超高速脉冲功率激光熔覆 Y2O3镍基合金涂层及其制备方法, 202310363506.8, 2023-4-7.

[4]一种Si掺杂改性MoAlB陶瓷及其制备方法, CN202011308888.7, 2021-02-26.

[5]一种掺杂元素铈P92的不锈钢管及其焊后循环热处理方法, CN202110137075.4, 2021-06-15.

[6]一种纳米M2B增强铁基耐磨涂层及其制备方法, CN202110169359.1, 2021-06-18.

[7]一种高强度MAB陶瓷致密块体及其制备方法, CN202010784681.0, 2020-12-22.

[8] 一种高抗磨定向Fe2B致密块体及其制备方法, CN201911360572.X, 2020-04-28.

[9]一种多孔自润滑Fe2B-Fe金属陶瓷复合材料及其制备方法, CN201811436979.1, 2019-01-18.

[10]一种改性Mo2FeB2基金属陶瓷及其制备方法, CN201910110210.9, 2019-05-31.

[11]一种稀土元素改性Mo2FeB2基金属陶瓷及其制备方法, CN201910110152.X, 2019-06-11.

[12]一种高强耐磨FeB材料的制备方法, CN201811436981.9, 2019-01-18