1.        张大伟. 螺纹花键同步滚轧理论与技术. 北京:科学出版社, 2020.

 2.        张大伟. 金属体积成形过程建模仿真及应用. 北京: 科学出版社, 2022.

 3.        张大伟, 赵升吨. 材料成形设备与系统——车辆制造中的应用. 北京: 机械工业出版社, 2023.

 4.        张大伟, 张琦. 金属塑性成形过程建模仿真技术. 北京: 机械工业出版社, 2024.

2026年代表作（第一作者）

1.    Dawei ZHANG^*,  Peng DONG, Jingxiang LI, Zijian YU, Shengdun ZHAO. Multi-pass intermittent local loading process of large-scale rib–web component: Forming characteristics and implementing apparatus. Chinese Journal of Aeronautics, 2026, 39(1):103435. https://doi.org/10.1016/j.cja.2025.103435 (SCI源期刊, 中科院1区)  

2.    Da-wei ZHANG^*, Zi-Yi Ge, Xian Li, Lin-Quan Chen, Xue-Kai Zhang. A new method for evaluating friction in coining process of rib–groove component: local constraint extrusion test of T-shaped component. Journal of Tribology, 2026, 148(6): 064201. https://doi.org/10.1115/1.4070475  (SCI源期刊)

3.    Da-wei ZHANG^*, Sheng-Tong Xiao, Han-Jing Li, Zi-Jian Yu, Jin-Jun Zhang. Comparison of forging load between whole and local forging processes of titanium alloy compressor disc: analytical and numerical studies. The International Journal of Advanced Manufacturing Technology, 2026, 142 (1-2): 235-250. https://doi.org/10.1007/s00170-025-16715-0  (SCI源期刊)

4.    张大伟^*, 肖晟通, 于子建, 李晗晶, 董朋, 赵升吨. 多道次局部加载成形试验样机运动控制系统研究, 塑性工程学报, 2026, 33(3): 251-259. https://doi.org/10.3969/j.issn.1007-2012.2026.03.026.

2025年代表作（第一作者/通讯作者）

1.   Zhang Dawei^*, Zhang Xuekai, Cao Zixuan, Ge Ziyi, Lv Shichang, Zhao Shengdun, Hu Yanghu. Characteristic of transition layer at soft metal-substrate interface for metal seal. Rare Metal Materials and Engineering, 2025, 54(1): 1-9. https://doi.org/10.12442/j.issn.1002-185X.20240473.(SCI源期刊; 约稿、封面论文)  

2.   Chong TIAN, Dawei ZHANG^*,  Guangcan YANG, Shengdun ZHAO. Geometric size and forming force prediction in incremental flanging: A new analytical model. Chinese Journal of Aeronautics, 2025, 38(2): 103016. https://doi.org/10.1016/j.cja.2024.04.002.(SCI源期刊, 中科院1区)   

3.   Guang-can YANG, Da-wei ZHANG^*, Chong TIAN, Sheng-dun ZHAO. Influence of geometric configurations on friction characteristics during incremental forming process of AA5052 sheet metal. Transactions of Nonferrous Metals Society of China, 2025, 35(3): 715-733. https://doi.org/10.1016/S1003-6326(24)66710-5 .(SCI源期刊, 中科院1区)  

4.    Chao Zhang, Kun Li, Shengdun Zhao^*, Ming Chang, Hong Jiang, Yongfei Wang, Yujian Ren, Dawei Zhang ^*. Microstructure Evolution and Mechanical Properties of High-Strength 7075 Aluminum Alloy during Multi-pass Hot Radial Forging Process. Journal of Materials Research and Technology, 2025, 37: 1276-1296. https://doi.org/10.1016/j.jmrt.2025.06.070.(SCI源期刊)

5.   Guang-can YANG, Da-wei ZHANG^*, Chong TIAN, Sheng-dun ZHAO. A new test for friction in incremental sheet forming. Transactions of Nonferrous Metals Society of China, 2025, 35(12): 3985-4006. https://doi.org/10.1016/S1003-6326(25)66925-1.(SCI源期刊)  

6.    Hu Yanghu, Zhang Dawei^*, Tian Chong, Chai Xing, Zhao Shengdun. Influence of friction condition on cavity filling for large-scale titanium alloy strut forging. Rare Metal Materials and Engineering, 2025, 54(6): 1462-1466. https://doi.org/10.12442/j.issn.1002-185X.20240277.(SCI源期刊)

7.    张大伟^*. 大型模锻件低能耗省力整体成形研究现状、挑战与展望. 精密成形工程, 2025, 17(4): 10-34.https://doi.org/10.3969/j.issn.1674-6457.2025.04.002.(约稿、封面论文)

8.    张大伟^*, 李晗晶, 张程, 肖晟通, 胡阳虎. 局部加载成形装置的设计及有限元验证, 重型机械, 2025, (4): 35-40.https://doi.org/10.13551/j.cnki.zxjxqk.2025.04.007.

2024年代表作（第一作者/通讯作者）

1.   Guang-Can Yang, Da-Wei Zhang^*, Chong Tian, Yang-Hu Hu, Sheng-Dun Zhao. A method for determining efficiency parameters based on efficiency-quality graph in incremental sheet forming. Journal of Materials Research and Technology, 2024, 33: 5170-5192. https://doi.org/10.1016/j.jmrt.2024.10.141 (SCI源期刊)

2.   Da-Wei Zhang_^*,  Xing Chai, Kun Li, Shu-Qin Fan, Chong Tian, Yang-Hu Hu, Sheng-Dun Zhao. Influence of friction on initial setting position of preform for final forging process of large-scale titanium alloy strut. The International Journal of Advanced Manufacturing Technology, 2024, 134: 4519-4528. https://doi.org/10.1007/s00170-024-14382-1 (SCI源期刊) 

3.   Da-Wei Zhang_^*,  Qiu-Tong Liu, Xu-Cheng Li, Lin-Quan Chen, Guang-Can Yang, Qi, Zhang, Sheng-Dun Zhao. Implementing approach of rolling process for inner spline sleeve with medium diameter: radial-feed rolling and through-feed rolling. The International Journal of Advanced Manufacturing Technology, 2024, 130: 2457-2473. https://doi.org/10.1007/s00170-023-12789-w (SCI源期刊) 

2023年代表作（第一作者/通讯作者）

1.    Da-Wei Zhang^*, Guang-Can Yang, Shi-Chang Lv, Chong Tian, Zhi-Jun Li. Fretting behavior of static metal seal and testing apparatus for fretting friction with low/high temperature. Tribology International, 2023, 187: 108676. https://doi.org/10.1016/j.triboint.2023.108676.(SCI源期刊, TOP期刊)   

2.    Chong Tian, Da-Wei Zhang _^*,   Guang-Can Yang, Cheng-Cheng Zhu, Sheng-Dun Zhao. A new forming limit test method for incremental stretch flanging. Journal of Materials Processing Technology, 2023 : 118082. https://doi.org/10.1016/j.jmatprotec.2023.118082.  (SCI源期刊, TOP期刊)

3.    Shuowen ZHANG, Dawei ZHANG _^*,  Shengdun ZHAO, Fei JIANG, Myoung-Gyu LEE. Characteristics of surface and subsurface of formed thread parts by axial-infeed thread rolling process. Chinese Journal of Aeronautics, 2023, 36(3): 471-481. https://doi.org/10.1016/j.cja.2022.07.019  (SCI源期刊, TOP期刊)

4.    Dawei Zhang^*, Linghao Hu, Bingkun Liu, Shengdun Zhao. Relationship between hardness and deformation during cold rolling process of complex profiles. Chinese Journal of Mechanical Engineering, 2023, 36: 120. https://doi.org/10.1186/s10033-023-00950-1(SCI源期刊)   

5.    Da-Wei Zhang^*, Wen-Long Gao-Zhang, Qi Zhang. Alternative flexible correction forming of a blade: multipoint correction with surface measurement and deformation simulation. Advances in Manufacturing, 2023, 11:587-600. https://doi.org/10.1007/s40436-023-00440-6.(SCI源期刊)   

6.    Da-Wei Zhang_^*,  Xu-Cheng Li, Qiu-Tong Liu, Sheng-Dun Zhao, Kun-Yin Lu. General phase-difference model of round dies for inner and external helical profile rolling processes with radial-feed and through-feed. The International Journal of Advanced Manufacturing Technology, 2023,126: 2765-2779. https://doi.org/10.1007/s00170-023-11172-z (SCI源期刊) 

7.    Kun Li, Dawei Zhang^*,  Shengdun Zhao_^*, Peng Zhang, Liangyu Fei. A novel multipass incremental gear rolling process with blank and rolling die axes crossed. The International Journal of Advanced Manufacturing Technology, 2023, 129: 715-726. https://doi.org/10.1007/s00170-023-12314-z  (SCI源期刊)

8.    张大伟^*, 雷征, 闫方琦, 田冲, 王晨浩, 李智军. 自紧式V形金属密封特性及悬臂结构影响. 机械科学与技术, 2023, 42(7): 1114-1119.https://doi.org/10.13433/j.cnki.1003-8728.20220079

2022年代表作（第一作者/通讯作者）

1.    Da-Wei Zhang_^*,  Ding-Hao Li, Bing-Kun Liu, Zai-Chi Yu, Sheng-Dun Zhao. Investigation and implementation for forming lead screw by through-feed rolling process with active rotation. Journal of Manufacturing Processes, 2022, 82: 96-112. https://doi.org/10.1016/j.jmapro.2022.07.062 (SCI源期刊) 

2.    Da-Wei Zhang_^*,  Chao Zhang, Chong Tian, Sheng-Dun Zhao. Forming characteristic of thread cold rolling process with round dies. The International Journal of Advanced Manufacturing Technology, 2022, 120: 2503-2515. https://doi.org/10.1007/s00170-022-08918-6 (SCI源期刊) 

3.    张大伟^*, 卢昆银, 赵升吨, 李帆. 内外局部约束下内齿圈滚轧成形. 机械工程学报, 2022, 58(20): 221-230.（约稿）http://www.cjmenet.com.cn/CN/10.3901/JME.2022.20.221  (EI源期刊)

4.    Shuowen Zhang, Shengdun Zhao, Fei Jiang, Yujian Ren, Dawei Zhang _^*, Myoung-Gyu Lee _^*. Analysis of thread rolling process using an analytical single tooth rolling model based on the slip line field theory and slab method. Journal of Manufacturing Processes, 2022, 76: 675-686. https://doi.org/10.1016/j.jmapro.2022.02.054.  (SCI源期刊)

5.    Chong Tian, Da-Wei Zhang _^*, Qi Zhang, Ze-Bang Zheng, Sheng-Dun Zhao. A drawing-flaring process of metal bushing ring without welding seam for plate heat exchanger. The International Journal of Advanced Manufacturing Technology, 2022,121: 2539-2552. https://doi.org/10.1007/s00170-022-09466-9.  (SCI源期刊)

6.    Shuowen Zhang, Dawei Zhang _^*, Dazhou Liu, Yuanzhe Dong, Fan Li, Shengdun Zhao _^*. Analysis of friction characteristics during the thread cold rolling process by using a novel single‑tooth rolling friction test. The International Journal of Advanced Manufacturing Technology, 2022,121: 5439-5449. https://doi.org/10.1007/s00170-022-09638-7  (SCI源期刊)

7.    Shuowen Zhang, Dawei Zhang _^*, Hong Jiang, Fei Jiang, Shengdun Zhao _^*. Numerical and experimental analysis of deformation behaviors and microstructure evolution in the thread rolling process. Journal of Materials Research and Technology, 2022, 19: 230-242. https://doi.org/10.1016/j.jmrt.2022.05.050.  (SCI源期刊)

2021年代表作（第一作者） 

1.    Da-Wei Zhang^*, Fang-Fang Xu, Zai-Chi Yu, Kun-Yin Lu, Ze-Bang Zheng, Sheng-Dun Zhao. Coulomb, Tresca and Coulomb-Tresca friction models used in analytical analysis for rolling process of external spline. Journal of Materials Processing Technology, 2021, 292: 117059. https://doi.org/10.1016/j.jmatprotec.2021.117059 . (SCI源期刊) 

2.    Da-Wei Zhang^*, Guang-Can Yang, Ze-Bang Zheng, Sheng-Dun Zhao. Effect of forming conditions on frictional characteristic in cold bulk forming process of copper alloy. Tribology International, 2021, 155: 106786. https://doi.org/10.1016/j.triboint.2020.106786.(SCI源期刊)   

3.    Dawei ZHANG_^*, Guangcan YANG, Shengdun ZHAO. Frictional behavior during cold ring compression process of aluminum alloy 5052. Chinese Journal of Aeronautics, 2021, 34(5): 47-64. https://doi.org/10.1016/j.cja.2020.07.030 (SCI源期刊) 

4      张大伟^*, 李智军, 杨光灿, 赵升吨. 金属体积成形中摩擦描述与评估研究进展. 锻压技术, 2021, 46(10):1-11.

2020年代表作（第一作者/通讯作者） 

1.    Dawei ZHANG^*, Bingkun LIU, Jingxiang LI, Minchao CUI, Shengdun ZHAO. Variation of the friction condition in cold ring compression test of medium carbon steel. Friction, 2020, 8(2): 311-322. (SCI源期刊) 

2.    Shuowen Zhang, Dawei Zhang_^*, Yongfei Wang_^*, Qian Zhu, Shengdun Zhao, Wei Luo. The planetary rolling process of forming the internal thread. The International Journal of Advanced Manufacturing Technology, 2020, 107: 3543-3551. (SCI源期刊)  

3.      张大伟^*, 朱成成, 赵升吨. 大型筒形件对轮旋压设备及应用进展. 中国机械工程, 2020, 31(9):1049-1056. (EI源期刊) 

2019年代表作（第一作者）

1.     Da-Wei Zhang^*, Sheng-Dun Zhao, Yong-Dong Bi. Analysis of forming error during thread and spline synchronous rolling process based on motion characteristic. The International Journal of Advanced Manufacturing Technology, 2019, 102: 915-928.(SCI源期刊)

2.      Da-Wei Zhang^*, Bing-Kun Liu, Fang-Fang Xu, Qi Wang, Sheng-Dun Zhao. A note on phase characteristic among rollers before thread or spline rolling. The International Journal of Advanced Manufacturing Technology, 2019,100:391-399. (SCI源期刊)

3.    Da-Wei Zhang^*, Bing-Kun Liu, Sheng-Dun Zhao. Influence of processing parameters on the thread and spline synchronous rolling process: an experimental study. Materials, 2019, 12(10), 1716, https://doi.org/10.3390/ma12101716. (SCI源期刊)

4.      Da-Wei Zhang^*, Tian-Lin Shi, Sheng-Dun Zhao. Through-process finite element modeling for warm flanging process of large-diameter aluminum alloy shell of gas insulated (metal-enclosed) switchgear. Materials, 2019, 12(11), 1784, https://doi.org/10.3390/ma12111784. (SCI源期刊)

5.    Da-Wei Zhang^*, Zhen-Hao Zheng, Sheng-Dun Zhao. Influence of geometric parameters on variation of motion during rolling process of involute spline. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41, 208. https://doi.org/10.1007/s40430-019-1710-2 (SCI源期刊)

6.    Dawei ZHANG^*, Fan LI, Shuaipeng LI, Shengdun ZHAO. Finite element modeling of counter-roller spinning for large-sized aluminum alloy cylindrical parts. Frontiers of Mechanical Engineering, 2019, 14(3): 351-357.(SCI源期刊)

7.    Zhang Dawei^*, Zhang Qi, Fan Xiaoguang, Zhao Shengdun. Review on joining process of carbon fiber-reinforced polymer and metal: applications and outlook.Rare Metal Materials and Engineering, 2019, 48(1): 44-54. (SCI源期刊)  

8.      张大伟^*, 赵升吨, 王利民. 复杂型面滚轧成形设备现状分析. 精密成形工程, 2019, 11(1): 1-10.（约稿）

2018年代表作（第一作者）

1.    Da-Wei Zhang^*, Xiao-Guang Fan. Review on intermittent local loading forming of large-size complicated component: deformation characteristics. The International Journal of Advanced Manufacturing Technology, 2018,99:1427-1448. (SCI源期刊)

2.    Da-Wei Zhang^*. Die structure and its trial manufacture for thread and spline synchronous rolling process. The International Journal of Advanced Manufacturing Technology, 2018, 96: 319-325. (SCI源期刊)

3.    Da-Wei Zhang^*, Shuai-Peng Li, Fei Jing, Shu-Qin Fan, Sheng-Dun Zhao. Initial position optimziation of preform for large-scale strut forging. TheInternational Journal of Advanced Manufacturing Technology, 2018, 94: 2803-2810. (SCI源期刊)

4.    Zhang Dawei^*,Zhang Qi, Fan Xiaoguang, Zhao Shengdun. Review on joining process of carbon fiber-reinforced polymer and metal: methods and joining process. Rare Metal Materials and Engineering, 2018, 47(12): 3686-3696.(SCI源期刊)

5.    Da-Wei Zhang^*, Sheng-Dun Zhao. Influences of friction condition and end shape of billet on convex at root of spline by rolling with round dies. Manufacturing Technology, 2018, 18(1): 165-169. (EI源期刊)

2017年代表作（第一作者/通讯作者）

1.    Da-Wei Zhang^*, Min-Chao Cui, Miao Cao, Ning-Yu Ben, Sheng-Dun Zhao. Determination of friction conditions in cold-rolling process of shaft part by using incremental ring compression test. The International Journal of Advanced Manufacturing Technology, 2017, 91: 3823-3831. (SCI源期刊)

2.      Ning-Yu Ben,  Da-Wei Zhang^*, Nan Liu, Xiang-Ping Zhao, Zhi-Jun Guo, Qi Zhang, Sheng-Dun Zhao. FE modeling of warm flanging process of large T-pipe from thick-wall cylinder. The International Journal of Advanced Manufacturing Technology, 2017, 93: 3189-3201. (SCI源期刊)

3.      张大伟^*. 钛合金筋板类构件局部加载成形有限元仿真分析中的摩擦及其影响. 航空制造技术, 2017, (4): 34-41. （约稿）

4.      张大伟^*.复杂构件锻造预成形坯料设计综述. 精密成形工程, 2017, 9(6): 143-156. （约稿）

2016年代表作（第一作者）

1.    Da-Wei Zhang^*, Hengan Ou. Relationship between friction parameters in Coulomb-Tresca friction model for bulk metal forming. Tribology International, 2016, 95: 13-18. (SCI源期刊)

2.    Da-Wei Zhang*, Sheng-Dun Zhao, Hengan Ou. Analysis of motion between rolling die and workpiece in thread rolling process with round dies. Mechanism and Machine Theory, 2016, 105: 471-494. (SCI源期刊) 

3.      Da-Wei Zhang^*. Sheng-Dun Zhao. Deformation characteristic of thread and spline synchronous rolling process. The International Journal of Advanced Manufacturing Technology, 2016, 87:835-851. (SCI源期刊)

4.    Da-Wei Zhang^*, Sheng-Dun Zhao, Hengan Ou. Motion characteristic between die and workpiece in spline rolling process with round dies.Advances in Mechanical Engineering, 2016, 8(7):1-12.(SCI源期刊)

5.    Zhang Da-wei^*, Zhao Sheng-dun.Numerical study on forming complex fitting body on end of integrated stainless steel pipe without welds. Journal of Central South University, 2016, 23(2): 269-276 (SCI源期刊)

6.    张大伟^*, 赵升吨, 朱成成, 张君, 胡阳虎, 段丽华. 钛合金实心锭穿孔挤压穿孔过程有限元分析. 稀有金属材料与工程, 2016, 45(1): 86-91. (SCI源期刊) 

2015年代表作（第一作者）

1.    Da-Wei Zhang^*, He Yang. Analytical and numerical analyses of local loading forming process of T-shape component by using Coulomb, shear and hybrid friction models. Tribology International, 2015, 92: 259-271. (SCI源期刊)

2.    Da-Wei Zhang^*, Sheng-Dun Zhao, Shi-Bo Wu, Qi Zhang, Shu-Qin Fan, Jingxiang Li. Phase characteristic between dies before rolling for thread and spline synchronous rolling process. The International Journal of Advanced Manufacturing Technology, 2015, 81(1-4): 513-528. (SCI源期刊)

3.    Da-Wei Zhang^*, He Yang. Fast analysis on metal flow in isothermal local loading process for multi-ribs component using slab method. The International Journal of Advanced Manufacturing Technology, 2015, 79 (9-12): 1805-1820. (SCI源期刊)

4.    Da-Wei Zhang^*, He Yang. Loading state in local loading forming process of large sized complicated rib-web component. Aircraft Engineering and Aerospace Technology, 2015, 87(3): 206-217. (SCI源期刊)

5.       张大伟^*, 赵升吨. 行星滚柱丝杠副滚柱塑性成形的探讨. 中国机械工程, 2015, 26(3): 385-389.

6.       张大伟^*, 赵升吨. 螺纹花键同轴零件高效同步滚压成形研究动态. 精密成形工程, 2015, 7(2): 24-29, 40.（约稿）

2014年代表作（第一作者）

1.    Da-Wei Zhang^*, Sheng-Dun Zhao. New method for forming shaft having thread and spline by rolling with round dies. The International Journal of Advanced Manufacturing Technology, 2014, 70(5-8): 1455-1462. (SCI源期刊)

2.    Da-wei ZHANG, Sheng-dun ZHAO, He YANG^*.Analysis of deformation characteristic in multi-way loading forming process of aluminum alloy cross valve based on finite element model. Transactions of Nonferrous Metals Society of China, 2014, 24(1): 199-207. (SCI源期刊)

3.    Da-wei ZHANG, He YANG^*. Development of transition condition for the region with variable-thickness in isothermal local loading process. Transactions of Nonferrous Metals Society of China, 2014, 24(4):1101-1108. (SCI源期刊)

4.    Zhang Dawei, Yang He^*. Distribution of metal flowing into unloaded area in the local loading process of titanium alloy rib-web component. Rare Metal Materials and Engineering, 2014, 43(2): 296-300. (SCI源期刊)

5.    Da-Wei Zhang^*, Sheng-Dun Zhao, Yong-Tang Li. Rotatory condition at initial stage of external spline rolling. Mathematical Problems in Engineering, 2014, 2014: Article ID 363184, 12 pages.(SCI源期刊)

6.       张大伟^*, 景飞, 赵升吨, 李蓬川, 罗恒军. 坯料放置位置对TC18钛合金支柱模锻过程的影响. 锻压技术, 2014, 39(12): 1-5.

2013年代表作（第一作者）

1.    Da-Wei Zhang^*, He Yang. Metal flow characteristics of local loading forming process for rib-web component with unequal-thickness billet. The International Journal of Advanced Manufacturing Technology. 2013, 68(9-12):1949-1965. (SCI源期刊)

2.    Da-Wei Zhang^*, He Yang. Numerical study of the friction effects on the metal flow under local loading way. The International Journal of Advanced Manufacturing Technology. 2013, 68(5-8):1339-1350.(SCI源期刊)

3.    Da-Wei Zhang^*, He Yang. Preform design for large-scale bulkhead of TA15 titanium alloy based on local loading features. The International Journal of Advanced Manufacturing Technology. 2013, 67(9-12): 2551-2562.(SCI源期刊)

2012年以前代表作（第一作者）

1.    D.W. Zhang, H. Yang, Z.C. Sun. Analysis of local loading forming for titanium-alloy T-shaped components using slab method. Journal of Materials Processing Technology, 2010, 210(2): 258-266. (SCI源期刊)

2.    Da-Wei Zhang, He Yang, Zhi-Chao Sun, Xiao-Guang Fan. Deformation behavior of variable-thickness region of billet in rib-web component isothermal local loading process. The International Journal of Advanced Manufacturing Technology. 2012, 63(1-4): 1-12. (SCI源期刊)

3.    Da-Wei Zhang, He Yang, Hong-Wei Li, Xiao-Guang Fan.Friction factor evaluation by FEM and experiment for TA15 titanium alloy in isothermal forming process. The International Journal of Advanced Manufacturing Technology. 2012, 60(5-8): 527-536.(SCI源期刊)

4.    ZHANG Da-wei, YANG He, SUN Zhi-chao, Fan Xiao-guang.Influences of fillet radius and draft angle on the local loading process of titanium alloy T-shaped components. Transactions of Nonferrous Metals Society of China. 2011, 21(12): 2693-2704. (SCI源期刊)

5.    ZHANG Da-wei, YANG He, SUN Zhi-chao. Finite element simulation of aluminum alloy cross valve forming by multi-way loading. Transactions of Nonferrous Metals Society of China, 2010, 20(6): 1059-1066. (SCI源期刊)

6.    D.W. Zhang, H. Yang, Z.C. Sun. 3D-FE modelling and simulation of multi-way loading process for multi-ported valves. Steel Research International, 2010, 81(3): 210-215.(SCI源期刊)

7.    ZHANG Dawei, LI Yongtang, FU Jianhua, ZHENG Quangang. Rolling force and rolling moment in spline cold rolling using slip-line field method. Chinese Journal of Mechanical Engineering. 2009, 22(5): 688-695. (SCI源期刊)

8.    ZHANG Dawei, LI Yongtang, FU Jianhua. Tooth curves and entire contact area in process of spline cold rolling. Chinese Journal of Mechanical Engineering. 2008, 21(6): 94-97. (SCI源期刊)

9.    ZHANG Dawei, LI Yongtang, FU Jianhua, ZHENG Quangang. Mechanics analysis on precise forming process of external spline cold rolling. Chinese Journal of Mechanical Engineering. 2007, 20(3):54-58.

10.    张大伟, 孙志超, 杨合. 四通阀多向加载成形参数影响模拟分析.锻压技术, 2010, 35(3): 148-152.