Jiang P, Zheng S T, Yang L Y, Chen Y W, Li D J, Xu R, Wang T J*. Thermo-mechanical discrete element modeling of the cracking in brittle film during thermal deposition process [J]. Engineering Fracture Mechanics, 2026, 338: 112053.

Yang L Y, Li D J, Chen Y W, Guo X P, Zhang J P, Jiang P*. Competition mechanisms between segmental cracking and interfacial cracking during plasma spraying process [J]. Journal of Materials Science & Technology, 2026, 241: 284-97.

Zheng Y W, Guo H M, Xie M X, Zhao C W*, Jiang P*. An optical measurement system for determining the first-order phase transition temperature in microscale solid materials [J]. Optics and Lasers in Engineering, 2026, 196.

Yang L Y, Song J H, Zhang H J, Zheng S T, Jiang P*. Comprehensive investigation and controllable regulation of cracking behaviors in TBCs during plasma spraying process [J]. Materials Science & Engineering A, 2026, 968: 150418

Sun F, Chen Y W, Li D J, Xu R, Jiang P*, Tang Q F*. Synergistic effects of porosity and interface roughness on oxidation failure in thermal barrier coating system [J]. Materials Science & Engineering A, 2026, 950.

Yang L Y, Jiang P*, Chen Y W, Li D J. Simultaneous measurement of TGO thickness and residual stress in thermal barrier coating system via extension of PLPS method [J]. Journal of Alloys and Compound, 2025, 1024.

Yang L Y, Chen Y W, Li D J, Jiang P*. Mechanisms governing the enhanced strain tolerance of segmented APS-TBCs [J]. Materials & Design, 2025, 253.

Yang L Y, Li D J, Chen Y W, Wang X X, Jiang P*. Experimental investigations of mechanisms governing residual stress evolution in segmented plasma sprayed coatings [J]. Surface & Coatings Technology, 2025, 500.

Yang L Y, Li D J, Chen Y W, Jiang P*. Theoretical analysis of mechanisms governing residual stress evolution in segmented plasma sprayed coatings [J]. Ceramics International, 2025, 51(8): 9588-603.

Yang L Y, Chen Y W, Li D J, Jiang P*. Influence of deposition parameters on the formation of surface cracks in segmented APS-TBCs [J]. Surface & Coatings Technology, 2025, 495.

Chen Y W, Zhang H J, Li D J, Zhao S Z, Yang L Y, Jiang P*. Investigation on the degradation behavior of air plasma sprayed thermal barrier coatings with service periods and temperatures [J]. Surface & Coatings Technology, 2025, 515.

Sun F, Chen Y W, Li D J, Xu R, Jiang P*, Wang T J. Over temperature in thermal barrier coating system induced by local spallation of ceramic layer [J]. Applied Thermal Engineering, 2025, 269.

Li J L, Tong Z F, Yang Q N, Wang J H, Jia C Y, Guo W, Zhang Y E, Jiang P, Qiu W, Uchimoto T, Xie S J*, Chen Z M*, Wang T J*. Non-destructive evaluation of defects in thermal barrier coating system using combined electromagnetic and thermographic signals [J]. Nature Communications, 2025, 16(1).

Li H Y, Ye X M, He L, Qian W Q, Jiang P, Wang T J*. Generalizability of local neural operator: Example for elastodynamic problems [J]. Computer Methods in Applied Mechanics and Engineering, 2025, 445.

Li H R, Qi H Y, Song Z R, Huang X, Guan Z D, Zhao C W, Jiang P. High-efficiency fabrication and phase transition behavior of microscale W-doped VO2 single crystals [J]. Materials Chemistry and Physics, 2025, 346.

Jiang P*, Yang L Y, Chen Y W, Li D J, Wang X X. Structure-dependent residual stress of thermal barrier coating on turbine blade with exposure to high temperature [J]. Journal of Alloys and Compound, 2024, 1002.

Jiang P*, Yang L Y, Li D J, Chen Y W. Residual stress in air-plasma-sprayed thermal barrier coatings under long-term high-temperature oxidation [J]. Surface & Coatings Technology, 2024, 484.

Jiang P*, Sun F, Chen Y W, Li D J. Oxide growth in high-strain tolerance thermal barrier coating with segmented vertical cracks [J]. Ceramics International, 2024, 50(14): 25025-33.

Luo S Y, Huang R Z, Bai H R, Jiang P, Qu Z L, Fang D N. Interfacial failure behavior of Thermal Barrier Coatings (TBCs) at high temperatures: An in-situ indentation study based on X-ray imaging [J]. Journal of the Mechanics and Physics of Solids, 2024, 187.

Li H Y, Ye X M, Jiang P, Qin G L*, Wang T J*. Local neural operator for solving transient partial differential equations on varied domains [J]. Computer Methods in Applied Mechanics and Engineering, 2024, 427.

李定骏, 杨镠育, 孙帆, 江鹏*, 陈艺文, 王铁军. 预热温度对热障涂层表面裂纹形成的影响[J]. 航空学报, 2022, 43(6): 526184-526184.

D.X. Li, P. Jiang, R.H. Gao, F.Sun, X.C. Jin*, X.L. Fan*. Experimental and numerical investigation on the thermal and mechanical behaviours of thermal barrier coatings exposed to CMAS corrosion[J]. Journal of Advanced Ceramics, 2021, 10(3): 551-564. 

P.F. Liu, P. Jiang, Y.L. Sun, R. Xu, T.J. Wang, W.X. Zhang*. Numerical Analysis of stress evolution in thermal barrier coating system during two-stage growth of heterogeneous oxide[J]. Ceramics International, 2021, 47(10): 14311-14319.

C.L. Li, X.C. Jin*, W. Zhao, J.J. Yang, P. Jiang, X.L. Fan*. Detecting the erosion of atmosphere-plasma-sprayed thermal barrier coating system using luminescent multi-sublayers[J]. Ceramics International, 2021, 47(10): 14689-14692.

P. Jiang, L.Y. Yang, Y.L. Sun, D.J. Li, T.J. Wang*. Local residual stress evolution of highly irregular thermally grown oxide layer in thermal barrier coatings[J]. Ceramics International, 2020, 47(8): 10990-10995.

吕伯文, 江鹏, 李定骏, 王铁军*. 重型燃气轮机高温叶片热障涂层烧结问题研究进展[J]. 中国材料进展, 2020, 2020(11): 855-870. 

P. Jiang, L.Y. Yang, Y.L. Sun, D.J. Li, T.J. Wang*. Nondestructive measurements of residual stress in air plasma-sprayed thermal barrier coatings[J]. Journal of the American Ceramic Society, 2020.

F. Sun, X.L. Fan*, T. Zhang, P. Jiang, J.J. Yang*. Numerical analysis of the influence of pore microstructure on thermal conductivity and Young's modulus of thermal barrier coating[J]. Ceramics International, 2020, 46(15): 24326-24332.

C. Ye, P. Jiang*. Accurate residual stress measurement as a function of depth in environmental barrier coatings via a combination of X-ray diffraction and Raman spectroscopy[J]. Ceramics International, 2020, 46(8): 12613-12617.

X.X. Yang, P. Jiang, F. Sun, L.Y. Yang, X.L. Fan*. A pyrolysis heating rate based pressureless method for preparing dense and crack-free polymer-derived silicon oxycarbide bulk ceramics[J]. Ceramics International, 2020, 46(8): 10392-10399.

X.K. Wang, X.L. Fan*, Y.L. Sun, R. Xu. P. Jiang. Modelling and analysis of the oxide growth coupling behaviour of thermal barrier coatings[J]. Journal of Materials Science, 2019, 54(6): 10270-10283.

P. Jiang, X.L. Fan*, Y.L. Sun, H.T. Wang, L.C. Su, T.J. Wang*. Thermal-cycle dependent residual stress within the crack-susceptible zone in thermal barrier coating system[J]. Journal of the American Ceramic Society, 2018, 101: 4256-4261.

C.L. Li, X.L. Fan*, P. Jiang, X.C. Jin. Delamination-indicating of atmosphere-plasma-sprayed thermal barrier coating system using Eu3+ luminescence mapping[J]. Materials Letters, 2018, 222:41-44.

范学领，张光辉，江鹏。瞬态热载荷下热障涂层系统界面断裂研究[J]. 固体火箭技术，2017, 40(6): 765-769.

P. Jiang, X.L. Fan*, Y.L. Sun, D.J. Li, T.J. Wang*. Bending-driven failure mechanism and modelling of double-ceramic-layer thermal barrier coating system[J]. International Journal of Solids and Structures, 2018, 130-131:11-20.

B. Li, X.L. Fan*, D.J. Li, P. Jiang. Design of thermal barrier coatings thickness for gas turbine blade based on finite element analysis[J]. Mathematical Problems in Engineering, 2017: 2147830, 13 pages.

X.C. Jin, X.L. Fan*, P. Jiang, Q. Wang. Microstructure evolution and ablation mechanism of C/C and C/C-SiC composites under a hypersonic flowing propane torch[J]. Advanced Engineering Materials, 2017, 19(11): 1700239.

P. Jiang, X.L. Fan*, Y.L. Sun, D.J. Li, B. Li, T.J. Wang*. Competition mechanism of interfacial cracks in thermal barrier coating system[J]. Materials & Design, 2017, 132: 559-566.

X.L. Fan*, P. Jiang, B. Li, X.C. Jin, Y. Zhao. Experimental and numerical evaluation of the ablation process of carbon/carbon composites using high velocity oxygen fuel system[J]. Advances in Materials Science and Engineering, 2017, 1543203, 7 pages.

一种高稳定性的二元式制冷压缩机组，江鹏、王铁军，西安交通大学，ZL202510131985.X

一种激光束的整形装置，江鹏、王铁军，西安交通大学，ZL202411230604.5

一种温区可控的激光加热装置江鹏、王铁军，西安交通大学，ZL202411230420.9

一种预测陶瓷层沉积裂纹结构并逆向设计制备参数的方法，江鹏、郑寿涛、陈艺文、王铁军，西安交通大学，ZL202510376614.8

一种基于SEM电镜的微型热力耦合原位加载台，江鹏、王铁军、李定骏、杨镠育，西安交通大学，ZL201811614422.2

一种燃气轮机叶片表面损伤的智能检测方法，江鹏、贾昭璇、陈艺文、李定骏、王铁军，西安交通大学、东方电气集团东方汽轮机有限公司，ZL202410207210.1

燃气轮机叶片激光预热制备表面带有纵向裂纹涂层的方法，江鹏、张坤、陈艺文、杨镠育、李定骏、王铁军，西安交通大学，ZL202510533775.3

一种结构损伤监测预警方法及结构完整性数字孪生系统，江鹏、王春明、李鸿宇、刘嘉一、刘宝君、孙帆、王铁军，西安交通大学、中国核电工程有限公司，ZL202111157838.8

原位雾化金属或陶瓷粉末的高能等离子喷枪装置及方法，王铁军、江鹏、白宇，西安交通大学，ZL202211344770.9

一种空天飞机热环境模拟用模块化加热装置及方法，王铁军、江鹏、王销彬，西安交通大学，ZL202210930363.X

一种空天飞机热环境模拟用模块化超高温加热装置及方法，王铁军、江鹏、王销彬，西安交通大学ZL202210930388.X

空天飞行器结构用梯度热冲击与热疲劳试验装置及方法，王铁军、江鹏、孙帆，西安交通大学，ZL202210861855.8

一种高温防热结构力热参数测量装置与方法，王铁军、江鹏、王彬文、杨镠育，西安交通大学，ZL202210832072.7

一种用于汽轮机叶片的现场高精度热处理装置，王铁军、江鹏、李定骏、张建普，西安交通大学、东方电气集团东方汽轮机有限公司，ZL202010621598.1

燃机和航空发动机热障涂层局部剥落损伤程度的评判方法，王铁军、江鹏、李定骏、陈艺文、孙帆、巩秀芳，西安交通大学、东方电气集团东方汽轮机有限公司，ZL202211693703.8

一种高温叶片热障涂层寿命考核的热环境实验装置及方法，王铁军、江鹏、孙帆、杨镠育、李定骏、陈艺文，西安交通大学、东方电气集团东方汽轮机有限公司，ZL202311334358.3

重型燃气轮机高温叶片热障涂层及设计、制造与评价方法，王铁军、江鹏、方宇、李定骏、巩秀芳、陈艺文，西安交通大学、东方电气集团东方汽轮机有限公司，ZL202311334359.8

一种热障涂层裂纹结构的喷涂参数优化方法，王铁军、江鹏、李定骏、方宇、宋佳昊、张建普，西安交通大学、电气集团东方汽轮机有限公司，ZL202311334362.X

一种基于应力调控的含表面裂纹热障涂层及其制备方法，王铁军、江鹏、李定骏、陈艺文、杨镠育、巩秀芳，西安交通大学、东方电气集团东方汽轮机有限公司，ZL202211692946.X

一种乏燃料组件激光切割设备及其切割工艺，王潇翔、江鹏、苗恺、刘杰、李涤尘、李明旭、雷雨、刘昊森，西安中核核仪器股份有限公司、西安交通大学，ZL202311059873.5

一种多场耦合环境模拟及在线监测/观测系统，王铁军、江鹏、范学领、李定骏、李彪、吕伯文、任晓雪、郭奕蓉，西安交通大学，ZL201610278879.5

一种基于卤素灯共聚焦加热技术的梯度热冲击试验装置，王铁军、江鹏、范学领、李定骏、李彪、吕伯文、郭奕蓉、任晓雪，西安交通大学，ZL201610279068.7

燃气轮机空心叶片预热及带有纵向裂纹涂层制备的方法，陈艺文、江鹏、王铁军、李定骏、周洪宇、赵仕志、熊元建、贺晨、郭显平、杨镇华、杨镠育、湛世界、谢小林，西安交通大学，东方电气集团东方汽轮机有限公司，ZL202510352328.8

手持式带水平校准及压力测量的多功能磨抛装置及使用方法，王铁军、吕伯文、江鹏、宋岩、李定骏、范学领，西安交通大学，ZL201510589603.4

一种叶片表面损伤程度的自动判定方法及系统，王铁军、赵沪、李鸿宇、江鹏，西安交通大学，ZL202210041530.5

一种结构表面损伤图像的智能分割方法及系统，王铁军、赵沪、李鸿宇、江鹏，西安交通大学，ZL202111327498.9

一种栅栏式隔震结构及其设计方法，刘咏泉、范洪郡、宿广原、江鹏，西安交通大学，ZL202111088300.6

一种飞机耐高温构件三维表面振动疲劳损伤测量方法，王铁军、乔壮、李鸿宇、江鹏、王彬文，西安交通大学，ZL202210897233.0

电磁热决策级融合的热障涂层系统缺陷解耦无损评价方法，解社娟、仝宗飞、仇巍、江鹏、陈振茂、王铁军，西安交通大学，ZL202510941296.5

一种基于石英灯加热的温度控制风洞装置及试验方法，吕计男、郭力、范学领、江鹏、李定骏、杨镠育，中国航天空气动力技术研究院,西安交通大学，ZL201910550317.5

一种基于电磁加热的温度控制风洞装置及试验方法，吕计男、郭力、范学领、江鹏、李定骏、杨镠育，中国航天空气动力技术研究院、西安交通大学，ZL201910550316.0

一种双元掺杂梯度多孔超高温陶瓷隔热耐压耐磨涂层及其制备方法，唐雨建、王销彬、刘诗华、江鹏、王艳苹、王春明、白国宇、马琴、刘宝君、刘嘉一，中国核电工程有限公司、西安交通大学，ZL202311268423.7

一种模块化气膜冷却卤素灯平面加热与冷却装置，王铁军、蒋昊南、范学领、李鸿宇、江鹏，西安交通大学，ZL201810246762.8

一种涡轮叶片热障涂层厚度优化设计方法，王铁军、李彪、范学领、李定骏、江鹏，西安交通大学，ZL201610854678.5

一种重型燃气轮机热障涂层孔隙结构的数值建模方法，王铁军、孙帆、李定骏、袁小虎、方宇、江鹏，西安交通大学,东方电气集团东方汽轮机有限公司，ZL202311334353.0

狭小空间热障涂层柔性内外协同激励传感测试系统及方法，解社娟、贾晨宇、仝宗飞、王铁军、陈振茂、郭威、江鹏，西安交通大学，ZL202510958930.6

一种涡流-激光-液晶智能材料协同的热障涂层无损检测探头及方法，解社娟、郭威、钟凯、王铁军、陈振茂、陈洪恩、江鹏、张伟旭，西安交通大学，ZL202510161909