校内登录
个人信息 更多+

田小永

教授 博士生导师 硕士生导师

  • 主要任职: 西安交通大学研究生院 学位办主任
  • 所在单位: 机械工程学院 / 研究生院
  • 电子邮箱:
  • 办公地点: 西安交通大学曲江校区南一楼A340
    创新港 高端装备研究院2-3023/涵英楼5-3057

论文成果

当前位置: 中文主页 - 科学研究 - 论文成果

Controllable inter-line bonding performance and fracture patterns of continuous fiber reinforced composites by sinusoidal-path 3D printing

发布时间:2025-04-30
点击次数:
发布时间:
2025-04-30
论文名称:
Controllable inter-line bonding performance and fracture patterns of continuous fiber reinforced composites by sinusoidal-path 3D printing
发表刊物:
Composites Science and Technology
摘要:
In order to improve the inter-line bonding performance of 3D printed continuous fiber reinforced composites, an innovative sinusoidal-path extrusion 3D printing method was proposed. Conventional 3D printing constructs components from stacks of individual extruded straight lines and flat layers, resulting in the relatively weak bonding that occurs between individual lines and layers and is aggravated due to the introduction of continuous fibers. The influence of structural parameters (amplitude & frequency) on the inter-line tensile properties and fracture patterns of sinusoidally 3D printed composites were systematically investigated. The results showed that as the amplitude and frequency of the sinusoidal path increased, the inter-line tensile strength, tensile modulus and fracture energy absorption of CCF/PLA composites increased 95.4%, 57.3% and 165%, respectively. Based on this study, a non-planar sinusoidal layer extrusion 3D printing method of CFRTPCs was proposed, which provides a new idea for comprehensive control of the anisotropy of 3D printed composites.
合写作者:
Shang Junfan, Tian Xiaoyong* et al
卷号:
192
页面范围:
108096
是否译文:
否
发表时间:
2020-02-28