校内登录
个人信息 更多+

田小永

教授 博士生导师 硕士生导师

  • 主要任职: 西安交通大学研究生院 学位办主任
  • 所在单位: 机械工程学院 / 研究生院
  • 电子邮箱:
  • 办公地点: 西安交通大学曲江校区南一楼A340
    创新港 高端装备研究院2-3023/涵英楼5-3057

近五年发表学术论文

当前位置: 中文主页 - 科研成果 - 近五年发表学术论文

详细论文清单见:https://www.researchgate.net/profile/Xiaoyong-Tian

2026

[1].  Li, W., et al., Multi-axis 3D printing of L-shaped honeycomb sandwich structure with continuous carbon fiber reinforced composites. Composite Structures, 2026. 377: p. 119901.

 [2]. Kang, Y., et al., Multi-level approximating 3D printing of curved surface with continuous carbon fiber for solid parabolic antenna. Journal of Manufacturing Processes, 2026. 158: p. 363-373.

 [3]. Huo, C., et al., 3D-printed SiC ceramic filters with glass sponge-inspired metastructures for high-temperature metal filtration. Additive Manufacturing, 2026. 120: p. 105135.

 [4]. Liu, M., et al., Enhancing mechanical properties of CCF/PEEK composites by rotary 3D printing with Co-regulation of hot compaction and fiber tension. Composites Science and Technology, 2026. 279: p. 111603.

 [5]. Ahmad, M.J., et al., Predictive Reinforcement and Mechanical Characterization of Copper Wire Embedded Polymer Composites Toward Advanced Multifunctional Applications. Polymer Composites, 2026: p. pc.71086.

 [6]. Wu, L., et al., 3D printed continuous copper fibre reinforced composite for thermal metamaterials. Virtual and physical prototyping, 2026. 21(1).

 [7]. Mei, Z., et al., Graph-based path planning for continuous fiber 3D printing with loop-dependent offset for topologically optimized structures. Journal of Manufacturing Processes, 2026. 177: p. 213-223.

 [8]. Liu, M., et al., Tribological behavior of CCF PEEK composite bushings fabricated by in situ rotary 3D printing. Tribology International, 2026.


2025

 [9]. Guo, Z., et al., 3D printing of curvilinear fiber reinforced variable stiffness composite structures: A review. Composites Part B: Engineering, 2025. 291: p. 112039.

[10]. Zhu, W., et al., Three-dimensional printing of high-performance continuous fiber-reinforced thermoplastic composites: Causes and elimination of process-induced defects. Composites. Part B, Engineering, 2025. 292: p. 112080.

[11]. Liu, T., et al., Solidification mechanism and performance of vacuum 3D printed carbon fiber reinforced polyether-ether-ketone composites for in-space additive manufacturing. Composites Part B: Engineering, 2025. 292: p. 112083.

[12]. Chi, X., et al., Machine Learning-Based Online Monitoring and Closed-Loop Controlling for 3D Printing of Continuous Fiber-Reinforced Composites. Additive Manufacturing Frontiers, 2025. 4(2): p. 200196.

[13]. Ahmad, M.J., et al., Non-conformal thermal cloak metamaterial by continuous metal fiber embedded 3D printing. International Journal of Heat and Mass Transfer, 2025. 242: p. 126796.

[14]. 田小永等, 面向太空制造的复合材料3D打印与回收利用. 上海航天(中英文), 2025. 42(1): 第20-28页.

[15]. Additive Manufacturing of Continuous Fiber Reinforced Polymer Composites. 2025.

[16]. Zhang, D., et al., 4D-Printed fiber-reinforced liquid crystal elastomer composites for multifunctional soft robots with self-heating actuation. Virtual and Physical Prototyping, 2025. 20(1): p. e2499927.

[17]. Yin, L., et al., A Bioinspired Helical Metamaterial for Broadband Electromagnetic Wave Absorption. Composites Part B: Engineering, 2025: p. 112685.

[18]. Huang, Y., et al., Multiscale topology optimization and 3D printing of continuous carbon fiber reinforced composites lattice structure. Composites Part B: Engineering, 2025: p. 112691.

[19]. Liu, T., et al., Progress in 3D Printing of Polymer and Composites for On-Orbit Structure Manufacturing. Additive Manufacturing Frontiers, 2025.

[20]. Huo, C., et al., 3D‐Printed Bioinspired Meta‐Structural Perovskite Catalysts for Dry Reforming of CH<SUB>4 </SUB>and CO<SUB>2</SUB>. Advanced Materials, 2025: p. 2508078.

[21]. Xue, J., et al., Inverse design of mechanical metamaterials balancing manufacturability and compactness: A case study on lattice cells. Extreme Mechanics Letters, 2025. 79: p. 102395.

[22]. Kang, Y., et al., Spider web-inspired continuous fibre floating 3D printing for large lightweight mesh structures. Virtual and Physical Prototyping, 2025. 20(1): p. e2546676.

[23]. Wu, S., et al., Additive Manufacturing and Performance Study of Hierarchically Structured Ceramics and Monolithic Catalysts. Additive Manufacturing Frontiers, 2025: p. 200254.

[24]. Liu, M., et al., Enhanced interlaminar shear strength of CCF/PEEK composites by rotary 3D printing with conformal infrared preheating and dual-roller hot pressing. Composites Part A: Applied Science and Manufacturing, 2025: p. 109376.


2024

[25]. Huang, Y., et al., 3D printing of topologically optimized wing spar with continuous carbon fiber reinforced composites. Composites Part B: Engineering, 2024. 272: p. 111166.

[26]. Huo, C., et al., 3D printed cross-scale structured TS-1 catalysts for continuous scale-up reactions. Additive Manufacturing, 2024. 80: p. 103962.

[27]. Huang, X., et al., High-Efficiency Dynamic Scanning Strategy for Powder Bed Fusion by Controlling Temperature Field of the Heat-Affected Zone. Chinese Journal of Mechanical Engineering, 2024. 37(1).

[28]. Sun, C., et al., A shape-performance synergistic strategy for design and additive manufacturing of continuous fiber reinforced transfemoral prosthetic socket. Composites Part B: Engineering, 2024. 281: p. 111518.

[29]. 吴若涵等, 基于同步辐射的3D打印CCF/PEEK复合材料失效机制及缺陷分析. 复合材料学报, 2024.

[30]. 刘明良等, 连续纤维增强加筋圆柱壳回转3D打印工艺及其轴压性能研究. 机械工程学报, 2024.

[31]. Guo, Z., et al., Optimization design and 3D printing of curvilinear fiber reinforced variable stiffness composites based on polar coordinate sweeping. Additive Manufacturing, 2024. 88: p. 104272.

[32]. Hou, Z., et al., Performance and failure modes of continuous fibre-reinforced energy absorption tubes by cylindrical layered 3D printing. Virtual and Physical Prototyping, 2024. 19(1): p. e2367122.

[33]. Yan, M. and X. Tian, Mechanical property of powder bed fusion printed carbon fiber reinforced polyetheretherketone and enhanced interlayer strength by post‐processing. Polymer Composites, 2024.

[34]. Tian, X., et al., Additive Manufacturing of Integrated Micro/Macro Structures Driven by Diversified Functions– 30 Years of Development of Additive Manufacturing in Xi'an Jiaotong University. Additive Manufacturing Frontiers, 2024: p. 200140.

[35]. Zhang, M., et al., Mechanism and performance of thermal radiation recycling for in-space 3D printed continuous carbon fibre-reinforced PEEK composites. Virtual and physical prototyping, 2024. 19(1).

[36]. Xing, X., et al., Data-driven design of thermal-mechanical multifunctional metamaterials. Materials Today Physics, 2024. 49: p. 101603.


2023

[37]. Liu, T., et al., Material extrusion 3D printing of polyether ether ketone in vacuum environment: Heat dissipation mechanism and performance. Additive Manufacturing, 2023. 62: p. 103390.

[38]. Zhang, M., et al., Thermal degradation and performance evolution mechanism of fully recyclable 3D printed continuous fiber self-reinforced composites. Sustainable Materials and Technologies, 2023. 37: p. e00706.

[39]. Akmal Zia, A., et al., Mechanical and energy absorption behaviors of 3D printed continuous carbon/Kevlar hybrid thread reinforced PLA composites. Composite Structures, 2023. 303: p. 116386.

[40]. Hou, Z., et al., Hybrid effect of 3D-printed coaxial continuous hybrid fibre-reinforced composites. Thin-Walled Structures, 2023. 188: p. 110820.

[41]. Tian, X., M. Ueda and K. Fu, Additive Manufacturing of Composites: Toward Light-weight, Functionalization, and Intellectualization. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2023. 2(2): p. 100082.

[42]. Xing, X., et al., Multifunctional thermal rotating cloak with nonconformal geometry. International Journal of Heat and Mass Transfer, 2023. 214: p. 124437.

[43]. Wang, Q., et al., Programmable spatial deformation by controllable off-center freestanding 4D printing of continuous fiber reinforced liquid crystal elastomer composites. Nature Communications, 2023. 14(1): p. 3869-3869.

[44]. Kang, Y., et al., 4D printed thermally tunable metasurface with continuous carbon fibre. Virtual and Physical Prototyping, 2023. 18(1).

[45]. Zia, A.A., et al., Tailorable mechanical and energy absorption behaviors of3D printed continuous hybrid fiber reinforced composites. Polymers for Advanced Technologies, 2023. 34(9): p. 2879-2889.

[46]. Wu, L., et al., 3D-printed Metamaterials with Versatile Functionalities. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2023. 2(3): p. 100091.

[47]. Xing, X., et al., Multifunctional Metamaterials with Ultrawideband Wave Absorption and Thermal Camouflage. Advanced Engineering Materials, 2023. 25(16).

[48]. Xing, X., et al., Thermal metamaterials with nonconformal geometry. Journal of Applied Physics, 2023. 133(20).

[49]. Zhang, M., et al., 3D printing of fully recyclable continuous fiber self-reinforced composites utilizing supercooled polymer melts. Composites Part A: Applied Science and Manufacturing, 2023. 169: p. 107513.

[50]. Xing, X., et al., A Thermo-Tunable Metamaterial as an Actively Controlled Broadband Absorber. Engineering, 2023. 20: p. 143-152.

[51]. Yan, W., et al., 3D Printing of Stretchable Strain Sensor Based on Continuous Fiber Reinforced Auxetic Structure. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2023. 2(2): p. 100073.

[52]. 杨来侠等, 3D打印连续纤维增强聚碳酸酯复合材料预浸丝制备与性能. 复合材料学报, 2023. 40(10): 第5654-5665页.

[53]. Akmal Zia, A., et al., Impact Resistance of 3D-Printed Continuous Hybrid Fiber-Reinforced Composites. Polymers, 2023. 15(21): p. 4209.

[54]. Zhang, D., et al., Spatial 3D Printing of Continuous Fiber-Reinforced Composite Multilayer Truss Structures with Controllable Structural Performance. Polymers, 2023. 15(21): p. 4333.

[55]. Huang, Y., et al., Progressive concurrent topological optimization with variable fiber orientation and content for 3D printed continuous fiber reinforced polymer composites. Composites Part B: Engineering, 2023. 255: p. 110602.

[56]. Wu, L., et al., Mechanical Metamaterials for Handwritten Digits Recognition. Advanced Science, 2023.


2022

[57]. Franchin, G., et al., Editorial: Advances in additive manufacturing of ceramics. Open Ceramics, 2022. 10: p. 100277.

[58]. Zocca, A., et al., Challenges in the Technology Development for Additive Manufacturing in Space. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2022. 1(1): p. 100018.

[59]. Qin, Y., et al., Enhanced impregnation behavior and interfacial bonding in CF/PEEK prepreg filaments for 3D printing application. Journal of Materials Research and Technology, 2022. 20: p. 4608-4623.

[60]. Huang, Y., et al., Multiscale concurrent design and 3D printing of continuous fiber reinforced thermoplastic composites with optimized fiber trajectory and topological structure. Composite Structures, 2022. 285: p. 115241.

[61]. Huo, C., et al., 3D printing of hierarchically porous monolithic TS‐1 catalyst for one-pot synthesis of ethylene glycol. Chemical Engineering Journal, 2022. 450: p. 138259.

[62]. Lin, K., et al., Electrical Property of 3D Printed Continuous Fiber Reinforced Thermoplastic Composite Mesh Reflecting Surfaces. International Journal of Aerospace Engineering, 2022. 2022: p. 1-7.

[63]. Malakhov, A.V., et al., Three-dimensional printing of biomimetic variable stiffness composites with controlled orientations and volume fraction of fibers. Composite Structures, 2022. 299: p. 116091.

[64]. Tian, X., et al., 3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2022. 1(1): p. 100016.

[65]. Tian, X., et al., Roadmap for Additive Manufacturing: Toward Intellectualization and Industrialization. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2022. 1(1): p. 100014.

[66]. Wu, L., et al., Modular Design for Acoustic Metamaterials: Low‐Frequency Noise Attenuation. Advanced Functional Materials, 2022. 32(13): p. 2105712.

[67]. Yan, M., X. Tian and R. Yao, Processability and reusability of CF/PEEK mixture for Powder Bed Fusion of high strength composites. Composites Communications, 2022. 35: p. 101318.

[68]. Zhong, Q., et al., High-accuracy calibration for multi-laser powder bed fusion via in situ detection and parameter identification. Advances in Manufacturing, 2022. 10(4): p. 556-570.

[69]. 曹汉杰等, 连续纤维自增强复合材料3D打印及其回收性能研究. 机械工程学报, 2022. 58(23): 第188-195页.

[70]. 侯章浩等, 连续纤维增强复合材料变刚度结构3D打印与性能研究. 机械工程学报, 2022. 58(5): 第170-177页.

[71]. 刘腾达等, 3D打印连续纤维复合假肢接受腔Z向强化制造策略. 机械工程学报, 2022. 58(7): 第267-275页.

[72]. 吴玲玲等, 2021年机械超材料热点回眸. 科技导报, 2022. 40(1): 第161-167页.

[73]. 李涤尘等, 增材制造——面向航空航天制造的变革性技术. 航空学报, 2022. 43(04): 第22-38+3页.