
教授 博士生导师 硕士生导师
| 组织机构 | 职务 | 任职时间 |
| 中国复合材料学会国际合作工作委员会 | 委员 | 2024-07-01 |
| 中国复合材料学会复合材料增材制造专业委员会 | 副主任委员 | 2024-07-01 |
| 机械工程学报 | 机械工程学报第十二届编委会委员 | 2023-11-01 |
| Composite part B | Composite part B 期刊 编委 | 2023-11-01 |
| 上海市增材制造协会 | 上海市增材制造协会航空航天专业委员会 | 2023-10-01 |
| Additive manufacturing frontiers 第一届青年编委会 | Additive manufacturing frontiers 第一届青年编委会 副主任委员 | 2023-07-01 |
| 辽宁省先进复合材料高性能制造重点实验室 | 学术委员会 委员 | 2022-11-01 |
| 《 Composite communication》期刊 | 《 Composite communication》特刊主编 | 2022-09-01 |
| 《Composite Part B》 | 《Composite Part B》 特刊主编 | 2022-08-01 |
| 飞行器新概念结构重点实验室 | 学术委员会 委员 | 2022-08-01 |
| SAMPE大陆总会 | 热塑性复合材料专业委员会 副主任 | 2021-01-01 |
| SAMPE中国大陆总会 | SAMPE 北京分会第三届理事会 理事 | 2020-05-01 |
| 中国机械工程学会增材制造分会 | 委员 | 2017-12-01 |
| 全国增材制造标准化技术委员会 | 委员 | 2016-04-14 |
| 《Progress in Additive Manufacturing》(Springer)期刊编委会 | 国际期刊编辑 | 2015-01-01 |
| 国际标准化组织增材制造标准委员会 | 增材制造标准制定 | 2014-12-01 |
| 奖项 | 获奖项目 | 获奖时间 | 获奖层次 | 级别 |
| 2025年度教育部科学研究优秀成果奖 | 连续纤维增强复合材料增材制造与功能调控机理 | 2025-07-10 | 省部级 | 二等奖 |
| 国际先进材料与制造工程学会 | 突出贡献奖 | 2024-03-28 | 其他 | 特等奖 |
| 2023年度中国机械工程学会优秀论文奖 | Roadmap for Additive Manufacturing: Toward Intellectualization and Industrialization | 2023-10-01 | 省部级 | 优秀奖 |
| 陕西高等学校科学技术研究优秀成果奖 | 连续纤维增强热塑性复合材料结构增材制造 | 2022-03-01 | 厅局级 | 一等奖 |
| 机械工程学报优秀论文 | 连续碳纤维增强聚乳酸复合材料3D打印及回收再利用机理与性能 | 2021-10-01 | 其他 | 优秀奖 |
| SAMPE中国创新制造奖 | 连续纤维增强复合材料结构3D打印及其应用探索 | 2021-07-07 | 国际级 | 特等奖 |
| 2020科创中国先导技术 | 连续纤维增强复合材料3D打印工艺及装备 | 2021-01-18 | 国家级 | 一等奖 |
| 2019 Composites Part A Highly Cited Paper Award | Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites | 2019-06-18 | 国际级 | 其他 |
| 渐变折射率人工电磁介质设计与3D打印制造 | 机械工程学报高影响力论文奖 | 2017-11-13 | 其他 | 一等奖 |
详细论文清单见:https://www.researchgate.net/profile/Xiaoyong-Tian
2026
[1]. Li, W., et al., Multi-axis 3D printing of L-shaped honeycomb sandwich structure with continuous carbon fiber reinforced composites. Composite Structures, 2026. 377: p. 119901.
[2]. Kang, Y., et al., Multi-level approximating 3D printing of curved surface with continuous carbon fiber for solid parabolic antenna. Journal of Manufacturing Processes, 2026. 158: p. 363-373.
[3]. Huo, C., et al., 3D-printed SiC ceramic filters with glass sponge-inspired metastructures for high-temperature metal filtration. Additive Manufacturing, 2026. 120: p. 105135.
[4]. Liu, M., et al., Enhancing mechanical properties of CCF/PEEK composites by rotary 3D printing with Co-regulation of hot compaction and fiber tension. Composites Science and Technology, 2026. 279: p. 111603.
[5]. Ahmad, M.J., et al., Predictive Reinforcement and Mechanical Characterization of Copper Wire Embedded Polymer Composites Toward Advanced Multifunctional Applications. Polymer Composites, 2026: p. pc.71086.
[6]. Wu, L., et al., 3D printed continuous copper fibre reinforced composite for thermal metamaterials. Virtual and physical prototyping, 2026. 21(1).
[7]. Mei, Z., et al., Graph-based path planning for continuous fiber 3D printing with loop-dependent offset for topologically optimized structures. Journal of Manufacturing Processes, 2026. 177: p. 213-223.
[8]. Liu, M., et al., Tribological behavior of CCF PEEK composite bushings fabricated by in situ rotary 3D printing. Tribology International, 2026.
2025
[9]. Guo, Z., et al., 3D printing of curvilinear fiber reinforced variable stiffness composite structures: A review. Composites Part B: Engineering, 2025. 291: p. 112039.
[10]. Zhu, W., et al., Three-dimensional printing of high-performance continuous fiber-reinforced thermoplastic composites: Causes and elimination of process-induced defects. Composites. Part B, Engineering, 2025. 292: p. 112080.
[11]. Liu, T., et al., Solidification mechanism and performance of vacuum 3D printed carbon fiber reinforced polyether-ether-ketone composites for in-space additive manufacturing. Composites Part B: Engineering, 2025. 292: p. 112083.
[12]. Chi, X., et al., Machine Learning-Based Online Monitoring and Closed-Loop Controlling for 3D Printing of Continuous Fiber-Reinforced Composites. Additive Manufacturing Frontiers, 2025. 4(2): p. 200196.
[13]. Ahmad, M.J., et al., Non-conformal thermal cloak metamaterial by continuous metal fiber embedded 3D printing. International Journal of Heat and Mass Transfer, 2025. 242: p. 126796.
[14]. 田小永等, 面向太空制造的复合材料3D打印与回收利用. 上海航天(中英文), 2025. 42(1): 第20-28页.
[15]. Additive Manufacturing of Continuous Fiber Reinforced Polymer Composites. 2025.
[16]. Zhang, D., et al., 4D-Printed fiber-reinforced liquid crystal elastomer composites for multifunctional soft robots with self-heating actuation. Virtual and Physical Prototyping, 2025. 20(1): p. e2499927.
[17]. Yin, L., et al., A Bioinspired Helical Metamaterial for Broadband Electromagnetic Wave Absorption. Composites Part B: Engineering, 2025: p. 112685.
[18]. Huang, Y., et al., Multiscale topology optimization and 3D printing of continuous carbon fiber reinforced composites lattice structure. Composites Part B: Engineering, 2025: p. 112691.
[19]. Liu, T., et al., Progress in 3D Printing of Polymer and Composites for On-Orbit Structure Manufacturing. Additive Manufacturing Frontiers, 2025.
[20]. Huo, C., et al., 3D‐Printed Bioinspired Meta‐Structural Perovskite Catalysts for Dry Reforming of CH<SUB>4 </SUB>and CO<SUB>2</SUB>. Advanced Materials, 2025: p. 2508078.
[21]. Xue, J., et al., Inverse design of mechanical metamaterials balancing manufacturability and compactness: A case study on lattice cells. Extreme Mechanics Letters, 2025. 79: p. 102395.
[22]. Kang, Y., et al., Spider web-inspired continuous fibre floating 3D printing for large lightweight mesh structures. Virtual and Physical Prototyping, 2025. 20(1): p. e2546676.
[23]. Wu, S., et al., Additive Manufacturing and Performance Study of Hierarchically Structured Ceramics and Monolithic Catalysts. Additive Manufacturing Frontiers, 2025: p. 200254.
[24]. Liu, M., et al., Enhanced interlaminar shear strength of CCF/PEEK composites by rotary 3D printing with conformal infrared preheating and dual-roller hot pressing. Composites Part A: Applied Science and Manufacturing, 2025: p. 109376.
2024
[25]. Huang, Y., et al., 3D printing of topologically optimized wing spar with continuous carbon fiber reinforced composites. Composites Part B: Engineering, 2024. 272: p. 111166.
[26]. Huo, C., et al., 3D printed cross-scale structured TS-1 catalysts for continuous scale-up reactions. Additive Manufacturing, 2024. 80: p. 103962.
[27]. Huang, X., et al., High-Efficiency Dynamic Scanning Strategy for Powder Bed Fusion by Controlling Temperature Field of the Heat-Affected Zone. Chinese Journal of Mechanical Engineering, 2024. 37(1).
[28]. Sun, C., et al., A shape-performance synergistic strategy for design and additive manufacturing of continuous fiber reinforced transfemoral prosthetic socket. Composites Part B: Engineering, 2024. 281: p. 111518.
[29]. 吴若涵等, 基于同步辐射的3D打印CCF/PEEK复合材料失效机制及缺陷分析. 复合材料学报, 2024.
[30]. 刘明良等, 连续纤维增强加筋圆柱壳回转3D打印工艺及其轴压性能研究. 机械工程学报, 2024.
[31]. Guo, Z., et al., Optimization design and 3D printing of curvilinear fiber reinforced variable stiffness composites based on polar coordinate sweeping. Additive Manufacturing, 2024. 88: p. 104272.
[32]. Hou, Z., et al., Performance and failure modes of continuous fibre-reinforced energy absorption tubes by cylindrical layered 3D printing. Virtual and Physical Prototyping, 2024. 19(1): p. e2367122.
[33]. Yan, M. and X. Tian, Mechanical property of powder bed fusion printed carbon fiber reinforced polyetheretherketone and enhanced interlayer strength by post‐processing. Polymer Composites, 2024.
[34]. Tian, X., et al., Additive Manufacturing of Integrated Micro/Macro Structures Driven by Diversified Functions– 30 Years of Development of Additive Manufacturing in Xi'an Jiaotong University. Additive Manufacturing Frontiers, 2024: p. 200140.
[35]. Zhang, M., et al., Mechanism and performance of thermal radiation recycling for in-space 3D printed continuous carbon fibre-reinforced PEEK composites. Virtual and physical prototyping, 2024. 19(1).
[36]. Xing, X., et al., Data-driven design of thermal-mechanical multifunctional metamaterials. Materials Today Physics, 2024. 49: p. 101603.
2023
[37]. Liu, T., et al., Material extrusion 3D printing of polyether ether ketone in vacuum environment: Heat dissipation mechanism and performance. Additive Manufacturing, 2023. 62: p. 103390.
[38]. Zhang, M., et al., Thermal degradation and performance evolution mechanism of fully recyclable 3D printed continuous fiber self-reinforced composites. Sustainable Materials and Technologies, 2023. 37: p. e00706.
[39]. Akmal Zia, A., et al., Mechanical and energy absorption behaviors of 3D printed continuous carbon/Kevlar hybrid thread reinforced PLA composites. Composite Structures, 2023. 303: p. 116386.
[40]. Hou, Z., et al., Hybrid effect of 3D-printed coaxial continuous hybrid fibre-reinforced composites. Thin-Walled Structures, 2023. 188: p. 110820.
[41]. Tian, X., M. Ueda and K. Fu, Additive Manufacturing of Composites: Toward Light-weight, Functionalization, and Intellectualization. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2023. 2(2): p. 100082.
[42]. Xing, X., et al., Multifunctional thermal rotating cloak with nonconformal geometry. International Journal of Heat and Mass Transfer, 2023. 214: p. 124437.
[43]. Wang, Q., et al., Programmable spatial deformation by controllable off-center freestanding 4D printing of continuous fiber reinforced liquid crystal elastomer composites. Nature Communications, 2023. 14(1): p. 3869-3869.
[44]. Kang, Y., et al., 4D printed thermally tunable metasurface with continuous carbon fibre. Virtual and Physical Prototyping, 2023. 18(1).
[45]. Zia, A.A., et al., Tailorable mechanical and energy absorption behaviors of3D printed continuous hybrid fiber reinforced composites. Polymers for Advanced Technologies, 2023. 34(9): p. 2879-2889.
[46]. Wu, L., et al., 3D-printed Metamaterials with Versatile Functionalities. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2023. 2(3): p. 100091.
[47]. Xing, X., et al., Multifunctional Metamaterials with Ultrawideband Wave Absorption and Thermal Camouflage. Advanced Engineering Materials, 2023. 25(16).
[48]. Xing, X., et al., Thermal metamaterials with nonconformal geometry. Journal of Applied Physics, 2023. 133(20).
[49]. Zhang, M., et al., 3D printing of fully recyclable continuous fiber self-reinforced composites utilizing supercooled polymer melts. Composites Part A: Applied Science and Manufacturing, 2023. 169: p. 107513.
[50]. Xing, X., et al., A Thermo-Tunable Metamaterial as an Actively Controlled Broadband Absorber. Engineering, 2023. 20: p. 143-152.
[51]. Yan, W., et al., 3D Printing of Stretchable Strain Sensor Based on Continuous Fiber Reinforced Auxetic Structure. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2023. 2(2): p. 100073.
[52]. 杨来侠等, 3D打印连续纤维增强聚碳酸酯复合材料预浸丝制备与性能. 复合材料学报, 2023. 40(10): 第5654-5665页.
[53]. Akmal Zia, A., et al., Impact Resistance of 3D-Printed Continuous Hybrid Fiber-Reinforced Composites. Polymers, 2023. 15(21): p. 4209.
[54]. Zhang, D., et al., Spatial 3D Printing of Continuous Fiber-Reinforced Composite Multilayer Truss Structures with Controllable Structural Performance. Polymers, 2023. 15(21): p. 4333.
[55]. Huang, Y., et al., Progressive concurrent topological optimization with variable fiber orientation and content for 3D printed continuous fiber reinforced polymer composites. Composites Part B: Engineering, 2023. 255: p. 110602.
[56]. Wu, L., et al., Mechanical Metamaterials for Handwritten Digits Recognition. Advanced Science, 2023.
2022
[57]. Franchin, G., et al., Editorial: Advances in additive manufacturing of ceramics. Open Ceramics, 2022. 10: p. 100277.
[58]. Zocca, A., et al., Challenges in the Technology Development for Additive Manufacturing in Space. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2022. 1(1): p. 100018.
[59]. Qin, Y., et al., Enhanced impregnation behavior and interfacial bonding in CF/PEEK prepreg filaments for 3D printing application. Journal of Materials Research and Technology, 2022. 20: p. 4608-4623.
[60]. Huang, Y., et al., Multiscale concurrent design and 3D printing of continuous fiber reinforced thermoplastic composites with optimized fiber trajectory and topological structure. Composite Structures, 2022. 285: p. 115241.
[61]. Huo, C., et al., 3D printing of hierarchically porous monolithic TS‐1 catalyst for one-pot synthesis of ethylene glycol. Chemical Engineering Journal, 2022. 450: p. 138259.
[62]. Lin, K., et al., Electrical Property of 3D Printed Continuous Fiber Reinforced Thermoplastic Composite Mesh Reflecting Surfaces. International Journal of Aerospace Engineering, 2022. 2022: p. 1-7.
[63]. Malakhov, A.V., et al., Three-dimensional printing of biomimetic variable stiffness composites with controlled orientations and volume fraction of fibers. Composite Structures, 2022. 299: p. 116091.
[64]. Tian, X., et al., 3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2022. 1(1): p. 100016.
[65]. Tian, X., et al., Roadmap for Additive Manufacturing: Toward Intellectualization and Industrialization. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2022. 1(1): p. 100014.
[66]. Wu, L., et al., Modular Design for Acoustic Metamaterials: Low‐Frequency Noise Attenuation. Advanced Functional Materials, 2022. 32(13): p. 2105712.
[67]. Yan, M., X. Tian and R. Yao, Processability and reusability of CF/PEEK mixture for Powder Bed Fusion of high strength composites. Composites Communications, 2022. 35: p. 101318.
[68]. Zhong, Q., et al., High-accuracy calibration for multi-laser powder bed fusion via in situ detection and parameter identification. Advances in Manufacturing, 2022. 10(4): p. 556-570.
[69]. 曹汉杰等, 连续纤维自增强复合材料3D打印及其回收性能研究. 机械工程学报, 2022. 58(23): 第188-195页.
[70]. 侯章浩等, 连续纤维增强复合材料变刚度结构3D打印与性能研究. 机械工程学报, 2022. 58(5): 第170-177页.
[71]. 刘腾达等, 3D打印连续纤维复合假肢接受腔Z向强化制造策略. 机械工程学报, 2022. 58(7): 第267-275页.
[72]. 吴玲玲等, 2021年机械超材料热点回眸. 科技导报, 2022. 40(1): 第161-167页.
[73]. 李涤尘等, 增材制造——面向航空航天制造的变革性技术. 航空学报, 2022. 43(04): 第22-38+3页.