校内登录
个人信息 更多+

田小永

教授 博士生导师 硕士生导师

  • 主要任职: 西安交通大学研究生院 学位办主任
  • 所在单位: 机械工程学院 / 研究生院
  • 电子邮箱:
  • 办公地点: 西安交通大学曲江校区南一楼A340
    创新港 高端装备研究院2-3023/涵英楼5-3057

论文成果

当前位置: 中文主页 - 科学研究 - 论文成果

A Modeling Method of Continuous Fiber Paths for Additive Manufacturing (3D Printing) of Variable Stiffness Composite Structures

发布时间:2025-04-30
点击次数:
发布时间:
2025-04-30
论文名称:
A Modeling Method of Continuous Fiber Paths for Additive Manufacturing (3D Printing) of Variable Stiffness Composite Structures
发表刊物:
Appl Compos Mater
摘要:
A modeling method of variable stiffness composite structures (VSCSs) with curved fiber trajectories has
been developed. The fiber trajectories are aligned in the direction of maximum principal stress, and the VSCSs with
variable fiber orientation and the variable fiber volume fraction are modeled on the basis of these trajectories. A
material property degradation method taking into account the heterogeneity of material properties of the VSCSs is
used to predict the ultimate load and model the progressive failure for a composite plate with a hole under tensile
loading. It is shown that a transition from rectilinear reinforcement to curvilinear results in an increase in the
ultimate load of the plate. The opportunity for simulation of a continuous fiber path for the VSCSs is presented, and
the path could be used to produce the VSCSs by additive manufacturing (3D printing).
合写作者:
Malakhov, Andrei V Polilov, Alexander N Zhang, Junkang Hou, Zhanghao Tian, Xiaoy
卷号:
27
页面范围:
185-208
是否译文:
否
发表时间:
2020-04-04