校内登录
个人信息 更多+

田小永

教授 博士生导师 硕士生导师

  • 主要任职: 西安交通大学研究生院 学位办主任
  • 所在单位: 机械工程学院 / 研究生院
  • 电子邮箱:
  • 办公地点: 西安交通大学曲江校区南一楼A340
    创新港 高端装备研究院2-3023/涵英楼5-3057

论文成果

当前位置: 中文主页 - 科学研究 - 论文成果

Study on the fabrication accuracy of ceramic parts by direct

发布时间:2025-04-30
点击次数:
发布时间:
2025-04-30
论文名称:
Study on the fabrication accuracy of ceramic parts by direct
发表刊物:
Virtual and Physical Prototyping
摘要:
Parameters in the stereolithography, drying, and sintering processes of ceramic components
had significant influences on the fabrication accuracies. Taguchi’s experimental
design method was utilised to investigate the relationships between parameters and the
fabrication accuracies. In the stereolithography process, line-width compensation had a
significant influence on the part’s dimensions. On the contrary, scanning speed had an
insignificant effect. The vacuum-freeze drying method was used to decrease shrinkage
(less than 2.0%) in the drying process. Sintering temperature was the most important
factor in the sintering process. According to analysis of the influence of the ladder effect
on surface roughness, small layer thickness and large inclination angle (more than 308)
were proposed to improve the surface quality of the produced ceramic parts.
合写作者:
Xiaoyong Tian et al
卷号:
2012, 1-8, iFirst article
是否译文:
否
发表时间:
2012-08-01