校内登录
个人信息 更多+

田小永

教授 博士生导师 硕士生导师

  • 主要任职: 西安交通大学研究生院 学位办主任
  • 所在单位: 机械工程学院 / 研究生院
  • 电子邮箱:
  • 办公地点: 西安交通大学曲江校区南一楼A340
    创新港 高端装备研究院2-3023/涵英楼5-3057

论文成果

当前位置: 中文主页 - 科学研究 - 论文成果

Characterizations of continuous carbon fiber reinforced composites for electromagnetic interference shielding fabricated by 3D printing

发布时间:2025-04-30
点击次数:
发布时间:
2025-04-30
论文名称:
Characterizations of continuous carbon fiber reinforced composites for electromagnetic interference shielding fabricated by 3D printing
发表刊物:
Applied Physics A
摘要:
In this paper, a continuous carbon fiber(CF) composite for electromagnetic interference shielding(EMIS) was obtained by continuous fiber 3D printing process. The continuous CF was used as conductive filler, and the thermoplastic resin of polylactide(PLA) was the matrix. 3D printed composite exhibited tunable shielding effectiveness (SE) by changing the angle between the CF orientation and the electric field(E-field). The SE was enhanced from 6.8 to 59.5dB with the angle decreasing from 90°(perpendicular to E-field) to 0°(parallel to E-field). In order to decrease the anisotropy of SE, CF deposited in a crossply (0°/90°) configuration was also studied with a shielding effectiveness SEav of 52.5dB in X band. Furthermore, with the copper and nickle coating on the CF, the SE could be further improved by about 5dB and10dB, achieving a high SEav of 62dB. The prepared CF composite has a low density of 1.03g/cm3, and fiber volume content of 6.3%, fiber mass content of 10.2%. Therefore, this proposed composite holds great promise as an electromagnetic interference shielding structure with high shielding effectiveness, strong processing ability, mechanical strength and light weight. Taking the advantages of 3D printing technology, the composites could be fabricated into any complex structures rapidly in low cost.
合写作者:
Li Xian Yin, Xiao Yong Tian*, Zhen Tao Shang, Xin Wang, and Di Li
是否译文:
否
发表时间:
2019-03-18