校内登录

个人信息
Personal Information
  • 教师姓名： 李常胜
  • 性别： 男
  • 职称： 副教授
  • 职务： 高端制造装备2011协同创新中心主任助理
  • 主要任职： 西安交通大学-通用技术集团联合研究院院长助理
  • 其他任职： 精密工程研究所所长助理
  • 博士生导师： 否
  • 硕士生导师： 是
  • 学历： 博士研究生毕业
  • 学位： 博士
  • 所在单位： 机械工程学院
  • 电子邮箱：
  • 办公地点： 西安交通大学曲江校区南一楼A座428室
  • 联系方式：
  • 学科： 机械工程

期刊论文

当前位置： 中文主页 > 科研成果/Publication > 期刊论文

  1. Fan Z, Kang C, Zhan H, Tan Q, Xue H, Zhang H, Li Y, Zhu Di, Shan R, Li C, et al. Toward understanding shrinkage porosity formation in laser additive manufacturing of solute-doped Al2O3 ceramics[J]. Materials Characterization, 2026: 116438.

  2. 金雨生, 丁建军, 李常胜, 等. 圆光栅任意角位置测角误差分离与自校准方法[J]. 机械工程学报, 2026, 62(4): 25-36.

  3. 王红远, 郭磊, 李保震, 朱李莹, 李常胜, 等. 高端光学元件超精密磨削技术研究进展[J]. 红外与激光工程, 2026, 55(4): 20260108-1-20260108-25.

  4. 康城玮, 李亚迅, 李常胜, 等. 基于贝叶斯信息量与模态分解的单晶硅磨削加工接触状态监测研究[J]. 制造技术与机床, 2026 (3): 26-33.

  5. Fan Z, Tan Q, Zhan H, Kang C, Li C, et al. Grain refinement in ceramic additive manufacturing: Mechanisms, strategies and performance implications[J]. Journal of the European Ceramic Society, 2026: 118602.

  6. Li C, Tang J, Fan Z, et al. Silicone-replication-assisted surface topography characterization of fine-grained diamond grinding wheels using density-based clustering[J]. Journal of Manufacturing Processes, 2026, 172: 288-303.

  7. Zang Y, Li C*, Tang J, et al. Compensation method for complex optics considering the arc grinding wheel profile error[J]. Optics Express, 2026, 34(1): 929-952.

  8. Y Jiao, Q Lin, K Yao, N Zhao, C Tang, Y Zhao, K Ye, C Li, Z Jiang. Wide-range and high-resolution FBG interrogator based on a silicon AWG photonic chip[J]. Optics & Laser Technology, 2026, 194: 114391.

  9. Li C*, Gao X, Zang Y, et al. Polishing performance of magnetorheological elastomer pad for single-crystal silicon[J]. Journal of Materials Research and Technology, 2025, 36: 9748-9760.

  10. Zang Y, Li C*, Tang J, et al. A composite surface registration method for freeform surface evaluation based on ICP coarse registration and PSO fine registration[J]. Optics and Lasers in Engineering, 2025, 193: 109079.

  11. Fan Z, Kang C*, Li X, Li C, et al. Advances in acoustic emission monitoring for grinding of hard and brittle materials[J]. Journal of Materials Research and Technology, 2025, 36: 1379-1408.

  12. Jiao Y, Lin Q, Yao K*, Zhao N, Zhao M, Tang C, Zhao Y, Ye K, Li C, Jiang Z. Optimization of high-accuracy FBG wavelength demodulation based on spectral correction and algorithm compensation[J]. Optics Express, 2025, 33(14): 28971-28984.

  13. Duan D*, Zhang W, Liu H, Chen S, Li C, et al. Effect of PMMA pore former on mechanical strength and performance of glass fibre metal-bonded porous diamond blocks with Cu–Sn–Ti solder alloys[J]. Diamond and Related Materials, 2024, 144: 111054.

  14. Q Kang, X Kong, J Chang, X Fang, C Kang, C Wu, C Li, et al. Nano-cutting mechanism of ion implantation-modified SiC: reducing subsurface damage expansion and abrasive wear[J]. Nanotechnology, 2024, 35(34): 345702.

  15. 王琛英， 景蔚萱， 张雅馨， 李伟， 张易军， 李常胜, 等. 基于激光溯源的纳米台阶高度标准物质研制与计量技术[J]. 计量科学与技术, 2024, 68(2): 52-59.

  16. Li C, Zhao N*, Zhang L, et al. An analytical method for assessing the initiation and interaction of cracks in fused silica subjected to contact sliding [J]. Advances in Manufacturing, 2023, 11(3): 363-377.

  17. 蒋庄德, 李常胜, 孙林, 等. 高端光学元件超精密加工技术与装备发展研究[J]. 中国工程科学, 2023, 25: 131-141.

  18. Li C, Ding J*, Zhang L*, et al. Densification effects on the fracture in fused silica under Vickers indentation[J]. Ceramics International, 2022, 48(7): 9330-9341.

  19. Li C, Sun L*, Chen Z, et al. Wheel setting error modeling and compensation for arc envelope grinding of large-aperture aspherical optics[J]. Chinese Journal of Mechanical Engineering, 2022, 35(1): 108.

  20. Li C*, Ma Y, Sun L, et al. An investigation into the densification-affected deformation and fracture in fused silica under contact sliding[J]. Micromachines, 2022, 13(7): 1106.

  21. Zhao N, Lin Q, Zhu L, Li C*, et al. Development of sapphire optical temperature sensing system used in harsh environment sensing[J]. IEEE Transactions on Instrumentation and Measurement, 2022, 71: 1-10.

  22. D Duan, F Han, J Ding, Q Lin, C Li, et al. Microstructure and performance of brazed diamonds with multilayer graphene-modified Cu–Sn–Ti solder alloys[J]. Ceramics International, 2021, 47(16): 22854-22863.

  23. Li C, Zhang L*, Ding J*, et al. Kinematic modeling of surface topography ground by an electroplated diamond wheel[J]. The International Journal of Advanced Manufacturing Technology, 2021, 114(9): 2753-2765.

  24. Y Liu, J Guo, J Ding, D Duan, Y Jiang, C Li, et al. Gear mapping technology based on differential envelope principle[J]. Mathematical Problems in Engineering, 2021, 2021(1): 6633643.

  25. Li C, Zhang L*, Sun L*, et al. A finite element study on the effects of densification on fused silica under indentation[J]. Ceramics International, 2020, 46(17): 26861-26870.

  26. Fang X, Li C*, Sun L, et al. Hardness and friction coefficient of fused silica under scratching considering elastic recovery[J]. Ceramics International, 2020, 46(6): 8200-8208.

  27. Duan D*, Li C, Sun L, et al. Microstructure and performance of brazed diamonds with Ni–Cr+ multilayer graphene composite alloy[J]. Journal of Alloys and Compounds, 2020, 816: 152630.

  28. Duan D, Li C*, Ding J, et al. Microstructure and performance of brazed diamond segments with NiCr–x (CuCe) composite alloys[J]. Ceramics International, 2020, 46(9): 13180-13188.

  29. Liu J, Sun L, Li C, et al. Research on processing technology of grinding aspheric workpiece in the five-axis machine tool[J]. International Journal of Nanomanufacturing, 2020, 16(3): 243-257.

  30. Li C, Zhang L*, Sun L*, et al. A quantitative analysis of the indentation fracture of fused silica[J]. Journal of the American Ceramic Society, 2019, 102(12): 7264-7277.

  31. D Duan, L Sun, X Fang, Q Lin, C Li, et al. Microstructure and processing performance of brazed diamond drill bits with Ni–Cr+ Cu–Ce composite solder[J]. Diamond and Related Materials, 2019, 93: 216-223.

  32. D Duan, L Sun, Q Lin, X Fang, C Li, et al. Effect of CuCe alloy addition on the microstructure and mechanical performance of brazed diamonds with NiCr alloy[J]. International Journal of Refractory Metals and Hard Materials, 2019, 80: 253-258.

  33. L Sun, S Yang, P Wu, C Li, et al. An error separation method based on surface matching in large aspheric measurement[J]. International Journal of Nanomanufacturing, 2019, 15(4): 355-368.

  34. Li C, Sun L, Yang S*, et al. Three-dimensional characterization and modeling of diamond electroplated grinding wheels[J]. International Journal of Mechanical Sciences, 2018, 144: 553-563.

  35. A Moridi, L Zhang, W Liu, S Duvall, A Brawley, Z Jiang, S Yang, C Li, et al. Characterisation of high thermal conductivity thin-film substrate systems and their interface thermal resistance[J]. Surface and Coatings Technology, 2018, 334: 233-242.

  36. Li C, Yang S*, Wang C, et al. In-plane calibration for AFM[J]. International Journal of Nanomanufacturing, 2017, 13(2): 185-196.

  37. Li C, Yang S*, Wang Y, et al. Measurement and characterization of a nano-scale multiple-step height sample using a stylus profiler[J]. Applied Surface Science, 2016, 387: 732-735.

  38. Li C, Yang S, Wang C, et al. EEMD based pitch evaluation method for accurate grating measurement by AFM[J]. Applied Surface Science, 2016, 380: 274-280.

  39. Wang C, Yang S, Li C, et al. Morphology of Al2O3 film fabricated by atomic layer deposition[J]. Rare Metal Materials and Engineering, 2015, 44(12): 3078-3082.

  40. Yang S*, Li C, Wang C, et al. A sub-50 nm three-step height sample for AFM calibration[J]. Measurement Science and Technology, 2014, 25(12): 125004.

  41. Q Lin, S Yang, W Jing, C Li, et al. Buckling and delamination of Ti/Cu/Si thin film during annealing[J]. Journal of electronic materials, 2014, 43(9): 3351-3356.

最后更新时间：--  访问量：

版权所有：西安交通大学 陕ICP备05001571号