46. Y.H. Tian, F. Liu, Y.Y. Wang, U. Ramamurty, B. Li, L.B. Ren, B.Y. Liu, Z.W. Shan. Bending-Induced Nanocrystallization Enables Large Deformation in Notched Micron-sized Single-Crystal Magnesium. Acta. Mater., 2026, 309: 122062.
45.练政希, 刘泽宇, 李玖章, 肖鹏, 郭居魁, 谷柳, 祝绪堂, 任凌宝*. 镁合金专用熔剂研究进展与应用展望. 热加工工艺, 2025, 54(14): 166-175.
44. L.L. Fan, Y.K. Xiao, Y. Zeng, R. Ni, Y.W.X. Zhang, L.B. Ren, H. Dieringa, Y.D. Huang, G.F. Quan, X. Zhang*. The strength-ductility synergy of magnesium matrix nanocomposite achieved by a dual-heterostructure. J. Mater. Sci. Technol., 2025, 215: 296-314.
43.L.L. Fan, L.B. Ren, Z.Y. Zhu, Y.Y. Huang, Y. Zeng, W. Feng, G.F. Quan, H. Dieringa, F. Zhao. Microstructure evolution and hot deformation behavior of nano-TiC reinforced AZ61 composite with bimodal grain structure. J. Alloy. Compd., 2025, 1014: 178696.
42.王帅, 刘泽宇, 叶建林, 汪舸, 郭阳阳, 蒲炫羽, 曾荣昌, 任凌宝, 单智伟.镁合金激光焊接气孔形成机制及调控措施研究进展. 稀有金属材料与工程, 2025, 54(6): 1630-1640.
41. 刘泽宇, 胡佳其, 王帅, 叶建林, 刘璐, 郭阳阳, 李豪, 曾荣昌, 任凌宝, 单智伟. 车用镁合金激光焊接质量控制及服役性能研究进展. 稀有金属材料与工程, 2025, 54(5): 1377-1396.
40. L.L. Fan, R. Ni, L.B. Ren, P. Xiao, Y. Zeng, D.D. Yin, H. Dieringa, Y.D. Huang, G.F. Quan, W. Feng. Revealing hetero-deformation induced (HDI) hardening and dislocation activity in a dual-heterostructure magnesium matrix composite. J. Magnes. Alloy, 2025, 13: 902-921.
39. 郭居魁*, 马骁, 任凌宝, 惠雪丽, 李永新. 基于ProCAST的某超大型镁合金飞机吊舱铸件工艺仿真与改进. 热加工工艺, 2024, 53(11): 138-143+149.
38. 郭阳阳, 李嘉诚, 任凌宝, 羿昌波, 练政希, 李进*, 刘章, 郭居魁. 镁合金电弧增材制造研究进展及展望. 热加工工艺, 2024, 53(20): 9-17.
37. L.B. Ren, Y.R. Zhao, J.J. Li, F. Liu, B.Y. Liu, G. Wu, C.J. Boehlert, Z.W. Shan. Inhibiting creep in fine-grained Mg-Al alloys through grain boundary stabilization. J. Magnes. Alloy, 2024, Online.
36. Y.W.X. Zhang, L.L. Fan, Y.Y. Guo, M.Y. Zhou, L.B. Ren, H.B. Yang, G.F. Quan*. Discharge performance of Mg-Y binary alloys as anodes for Mg-air batteries. Electrochimica Acta, 2023, 460: 142596.
35. M.Y. Zhou, S.X. Gao, Y.L. Zhao, Q.F. Yang, X.H. Liu, L.B. Ren, L.L. Lyu, G.F. Quan, M. Gupta. Hybrid (Carbon Nanotube plus Graphene Nanoplatelet)/AZ31 Composite with Simultaneously Enhanced Strength and Ductility. Adv. Eng. Mater, 2022, 24(3): 2100827.
34. Y.Y. Guo, G.F. Quan, M. Celikin, L.B. Ren, Y.H. Zhan, L.L. Fan, H.H. Pan. Effect of heat treatment on the microstructure and mechanical properties of AZ80M magnesium alloy fabricated by wire arc additive manufacturing. J. Magnes. Alloy, 2022, 10: 1930-1940.
33. H. Wang, Z. Wang, G. Chen, L.B. Ren, T.B. Tan, Y.Y. Guo, Y. Liu, H.H. Pan*. Diffusion bonding of Zr-2.5Nb zirconium alloy and 304L stainless steel with Nb/Ni hybrid interlayer. Mater. Lett., 2022, 324: 132652.
32. Y.W.X. Zhang, L. Han, L.B. Ren, L.L. Fan, Y.Y. Guo, M.Y. Zhou, G.F. Quan*. Effect of yttrium and calcium additions on electrochemical behaviors and discharge performance of AZ80 anodes for Mg-air battery. Trans. Nonferrous Met. Soc. China, 2022, 32: 2510-2526.
31. M.Y. Zhou, X.H. Liu, H.F. Yue, S.C. Liu, L.B. Ren, Y. Xin, L.L. Lyu, Y.L. Zhao, G.F. Quan, M. Gupta. Hot deformation behavior and processing maps of hybrid SiC and CNTs reinforced AZ61 alloy composite. J. Alloys Compd., 2021, 868: 159098.
30. Y.Y. Guo, G.F. Quan, Y.L. Jiang, L.B. Ren, L.L. Fan, H.H. Pan*. Formability, microstructure evolution and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy using gas tungsten arc welding. J. Magnes. Alloy, 2021, 9: 192-201.
29. Z. Wang, Y.Y. Guo, L.B. Ren, G.F. Quan, Y. Liu, H.H. Pan. Effect of Bonding Temperature on Microstructure and Mechanical Properties of 304L/Zircaloy-4 Diffusion-Bonded Joints with Ni/Ta Hybrid Interlayer. Adv. Eng. Mater., 2021, 23: 1-9.
28. M.Y. Zhou, Y.L. Zhao, N. Liao, L.B. Ren, L.L. Lv*, G.F. Quan, M. Gupta. The effects of extrusion ratio on microstructure and mechanical properties of hybrid micron SiC and carbon nanotube reinforced AZ61 composite. Adv. Eng. Mater., 2021, 23: 1-8.
27. L.B. Ren*, C.J. Boehlert, G.F. Quan. The effect of Y and Nd additions on the microstructure and creep behavior of AZ80. Mater. Sci. Eng. A, 2021, 801C: 140397.
26. M.Y. Zhou, L.B. Ren, M. Gupta, L.L. Fan, Y.W.X. Zhang, T.H. Lu, G.F. Quan. Progress in Research on Hybrid Metal Matrix Composites. J. Alloy. Compd., 2020, 155274.
25. L.L. Fan, M.Y. Zhou, L.B. Ren, H.Y. Li, H.T. Zhang, T.H. Lu, C.L. Liu, G.F. Quan*. The Effect of Equal Channel Angular Pressing on Coarsening Kinetics of AZ80-0.2Y-0.15Ca Alloy in Semisolid State. Adv. Eng. Mater., 2020, 2000415.
24. T.H. Lu, M.Y. Zhou, L.B. Ren, L.L. Fan, Y.Y. Guo, X.N. Qu, H.T. Zhang, X.W. Lu, G.F. Quan*. Effect of Graphene Nanoplatelets Content on the Mechanical and Wear Properties of AZ31 Alloy. Metals, 2020, 10: 1265.
23. M.Y. Zhou, Y.L. Zhao, N. Liao, L.B. Ren, L.L. Lv, G.F. Quan, M. Gupta. The effects of extrusion ratio on microstructure and mechanical properties of hybrid micron SiC and carbon nanotubes reinforced AZ61 composite. Adv. Eng. Mater., 2020, 2001089.
22. L.B. Ren, M.Y. Zhou, T.H. Lu, L.L. Fan, Y.Y. Guo, Y.W.X. Zhang, C.J. Boehlert, G.F. Quan. Eutectic phase strengthening and strain rate sensitivity behaviors of AZ80 magnesium alloy. Mater. Sci. Eng. A, 2020, 770: 138548.
21. L.B. Ren, M.Y. Zhou, C.J. Boehlert, G.F. Quan. Multi-microalloying mediated grain growth and texture evolution during the high-temperature static recrystallization of AZ80 alloys. J. Alloy. Compd., 2020, 834: 155077.
20. B. Liu, M.Y. Zhou, L.B. Ren, H. Sun, G.F. Quan*. Microstructure and mechanical properties of graphene-reinforced magnesium alloys. Mater. Sci. Tech., 2019, 27(1): 9-15.
19. Q.R. Yang, Y. Zeng*, M.Y. Zhou, G.H. Huang, L.B. Ren, J.W. Lu, D.D. Yin, B. Jiang. Effect of yttrium addition (0.2 wt.%) on the hot compression behavior of the as-cast Mg-Sn alloy. Rare Metal Mat. Eng., 2019, 48(7): 2275-2283.
18. Y.T. Tang, C. Zhang, L.B. Ren, W. Yang, D.D. Yin, G.H. Huang, H. Zhou, Y.B. Zhang. Effects of Y content and temperature on the damping capacity of extruded Mg-Y sheets. J. Magnes. Alloys, 2019, 7: 522-528.
17. Y.Y. Guo, H.H. Pan, L.B. Ren, G.F. Quan*. Microstructure and mechanical properties of wire arc additively manufactured AZ80M magnesium alloy. Mater. Lett., 2019, 247: 4-6.
16. M.Y. Zhou, L.B. Ren, L.L. Fan, K.S. Tun, M. Gupta, Y.W.X. Zhang, T.H. Lu, G.F. Quan. Achieving ultra-high strength and good ductility in AZ61 alloy composites containing hybrid micron SiC and carbon nanotubes reinforcements. Mater. Sci. Eng. A, 2019, 768: 138447.
15. L.B. Ren, M.Y. Zhou, Y.W.X. Zhang, C.J. Boehlert, G.F. Quan. Effect of 0.4 wt.% yttrium addition and heat treatment on the high-temperature compression behavior of cast AZ80. J. Mater. Sci., 2019, 54(7): 5757-5772.
14. J.T. Dang, Z.Z. Jiang, L.B. Ren, D.D. Yin, G.F. Quan*. Microstructure and hot deformation behavior of as-extruded AZ631M magnesium alloy. Rare Metal Mat. Eng., 2018, 47(4): 1293-1301.
13. M.Y. Zhou, L.B. Ren, G.F. Quan*, X.X. Su. Study on corrosion behavior of as-extruded AZ80 magnesium alloy sheet in wet hydrogen sulfide atmosphere. Mater. Corros., 2018, 69(11): 1620-1630.
12. Y.Y. Guo, H.H. Pan, L.B. Ren, G.F. Quan*. An investigation on plasma-MIG hybrid welding of 5083 aluminum alloy. Int. J. Adv. Manuf. Technol., 2018, 98(5-8): 1433-1440.
11. Y.Y. Guo, H.H. Pan, L.B. Ren, B.S. Liu, Y. Liu, G.F. Quan. Effect of Zn interlayer thickness on the interfacial microstructure of two-step diffusion bonded joint of ZK60 and 5083 alloys. Vacuum, 2018, 161: 353-360.
10. L.B. Ren, L.L. Fan, M.Y. Zhou, Y.Y. Guo, Y.W.X. Zhang, C.J. Boehlert, G.F. Quan*. Magnesium application in railway rolling stocks: a new challenge and opportunity for lightweighting. Int. J. Lightweight Mater. Manuf., 2018, 1(2): 81-88.
09. L.B. Ren, G.F. Quan*, C.J. Boehlert, M.Y. Zhou, Y.Y. Guo, L.L. Fan. The microstructure and mechanical behavior evolution of AZ80 during gradient increment cyclic loading. Metall. Mater. Trans. A, 2018, 49A(8): 3692-3702.
08. M.Y. Zhou, X.N. Qu, L.B. Ren, L.L. Fan, Y.W.X. Zhang, Y.Y. Guo, G.F. Quan*, Q. Tang, B. Liu, H. Sun. The effects of carbon nanotubes on the mechanical and wear properties of AZ31 alloy. Materials, 2017, 10(12): 1385.
07. M.Y. Zhou, X.X. Su, L.B. Ren, D.D. Yin, G.F. Quan*, Y.B. Zhang. Tensile deformation behavior of as-extruded Mg-3A1-3Zn-1Ti-0.6RE magnesium alloy at elevated temperature. Rare Metal Mat. Eng., 2017, 46(8): 2149-2155.
06. L.B. Ren, G.F. Quan, Z.Z. Jiang, D.D. Yin*. Atmospheric Heat Dispersion Research of Mg-Al-Zn Magnesium Alloys. Rare Metal Mat. Eng., 2017, 46(5): 1265-1270.
05. L.B. Ren, G.F. Quan*, M.Y. Zhou, Y.Y. Guo, Z.Z. Jiang, Q. Tang. Effect of Y addition on the aging hardening behavior and precipitation evolution of extruded Mg-Al-Zn alloys. Mater. Sci. Eng. A, 2017, 690: 195-207.
04. L.B. Ren, G.F. Quan, Y.G. Xu, D.D. Yin*, J.W. Lu, J.T. Dang. Effect of heat treatment and pre-deformation on damping capacity of cast Mg-Y binary alloys. J. Alloy. Compd., 2017, 699: 976-982.
03. J.W. Lu, D.D. Yin*, L.B. Ren, G.F. Quan. Tensile and compressive deformation behavior of peak-aged cast Mg-11Y-5Gd-2Zn-0.5Zr (wt%) alloy at elevated temperatures. J. Mater. Sci., 2016, 51(23): 10464-10477.
02. L.B. Ren, J. Wu, G.F. Quan*. Plastic behavior of AZ80 alloy during low strain rate tension at elevated temperature. Mater. Sci. Eng. A, 2014, 612: 278-286.
01. G.F. Quan*, L.B. Ren. Process and property of superplastic mould forged AZ80 wheel hub. Mater. Sci. Forum, 2014, 788: 12-16.
★特邀会议报告(近三年):
08. 任凌宝等, 镁合金轻量化重卡创制及应用研究进展 (特邀报告), 变形镁合金技术与市场研讨会暨产需对接会, 中国·池州, 2026.08.21.
07. 任凌宝等, 轻量化通讯装备用耐蚀超高导热镁合金设计及制备 (特邀报告), 2026(第十六届)中国有色金属学会青年科技论坛, 中国·赣州, 2026.08.15.
06. 任凌宝等, 商用车专用高品质变形镁合金设计制备及应用 (特邀报告), 中国材料大会2026, 中国·武汉, 2026.07.15.
05. 任凌宝等, 绿色物流驱动镁合金轻量化重卡创制与应用 (特邀报告), 2025年全国镁行业大会暨镁业分会第二十八届年会, 中国·运城, 2025.10.21.
04. 任凌宝等, 基于镁合金运煤重卡开发实践探究高品质镁合金设计与应用 (特邀报告), 第四届(2024)国际有色金属新材料大会, 中国·郑州, 2024.11.22.
03. Ling-Bao Ren, et al., A review of the influence of flux on the application of high-quality magnesium-based materials (Invited Talk), ICM 8 & Mg 2024 Conference, Chongqing, China, 2024.11.04.
02. 任凌宝等, 高导热镁合金设计、制备与性能 (邀请报告), 第十五届中国有色金属学会青年科技论坛, 中国·哈尔滨, 2024.08.16.
01. Ling-Bao Ren, et al., Progress of high-quality magnesium alloy applications on commercial vehicle (Invited Talk), 81st World Magnesium Conference, Fukuoka, Japan, 2024.05.20.




