Science Project

No entries were found.

Research Team

 

2023:

  • Zhuo X, Wang C, Wang M, Wu J, Zhang X, Cui J, Mei X, Fan Z*(2023), Al-modified environmental barrier coatings for protection against water vapor corrosion, Corrosion Science. (Accept) (IF:7.720)
  • Zheng Q, Mei X*, Jiang G, Cui J, Fan Z, Wang W, Yan Z, Guo H, Pan A (2023), Investigation on ultrasonic vibration-assisted femtosecond laser polishing of C/SiC composites, Journal of the European Ceramic Society. (Accept) (IF: 6.364)
  • Zheng Q, Mei X*, Jiang G, Yan Z, Fan Z*, Wang W, Pan A, Cui J*(2023), Influence of surface morphology and processing parameters on polishing of silicon carbide ceramics using femtosecond laser pulses, Surfaces and Interfaces, 36(1), 102528. (IF:6.137)

2022:

  • Sun T, Mei XS*, Sun XM, Cao YX, Ji YC, Fan ZJ* (2022), Real-time Monitoring and Control of the Breakthrough Stage in Ultrafast Laser Drilling based on Sequential Three-way Decision. IEEE Transactions on Industrial Informatics, DOI 10.1109/TII.2022.3165302, (IF:10.215)
  • Zhang X1, Zhuo X1, Fan Z1, Mao J, Deng C, Deng C, Mei X, Cui J, Zhou K, Liu M (2022), Al2O3-modified 7YSZ thermal barrier coatings for protection against volcanic ash corrosion. npj Materials Degradation, 6(1), 89. (IF:6.889)
  • Huang WW, Mei XS, Wang YG, Fan ZJ, Chen C, Jiang GD (2022), Two-dimensional phase unwrapping by a high-resolution deep learning network, Measurement, DOI 10.1016/j.measurement.2022.111566, (IF:5.131)
  • Chen C, Mei XS, Hou DX, Fan ZJ, Huang WW (2022). A Voronoi-Diagram-based method for centerline extraction in 3D industrial line laser reconstruction using a graph-centrality-based pruning algorithm. Optik- International Journal for Light and Electron Optics, 261, 169179. (IF:2.443)
  • Xu H., Zheng W., Wang Y., Xu D., Zhao N., Qin Y., Yuan Y., Fan Z., Nan X., Duan Q., Wang W., Lu Y., Gao L. (2022). Flexible tensile strain-pressure sensor with an off-axis deformation-insensitivity. Nano Energy, 107384. (IF:17.881)
  • Ali M. S., Cui J., Ullah N., Ali Kiani M., Mei H., Ren X., Xu D., Fan Z., Mei, X. (2022). Molecular Dynamics Simulation on Wetting of Silver Nanosolder on a Diamond Surface. The Journal of Physical Chemistry C, 126(16), 7221-7229. (IF:4.126)

2021:

  • Fan ZJ, Sun XM, Zhuo XS, Mei XS*, Cui JL, Duan WQ, Wang WJ, Zhang XF, Lu Y* (2021), Femtosecond laser polishing yttria-stabilized zirconia coatings for improving molten salts corrosion resistance. Corrosion Science, 184, 109367. (IF:7.206)
  • Sun XM, Wang KD, Fan ZJ*, Wang RJ, Mei XS, Lu Y (2021), Regulation of hydrophobicity on yttria stabilized zirconia surface by femtosecond laser. Ceramics International, 47, 9264-9272. (IF:4.527)
  • Fan ZJ, Li LL, Mei XS, Zhao F, Li HJ, Zhuo XS, Zhang XF, Lu Y, Zhang L, Liu M* (2021),The multilayer ceramic film capacitors for high-performance energy storage: progress and outlook. Journal of Materials Chemistry A, 9, 9462. (IF:12.732)
  • Wang RJ, Dong X*, Wang KD, Sun XM, Fan ZJ, Duan WQ, Martin BGJ (2021), Polarization effect on hole evolution and periodic microstructures in femtosecond laser drilling of thermal barrier coated superalloys. Applied Surface Science, 537. (IF:6.707)
  • Li X, Fan R, Fan ZJ, Lu Y* (2021), Programmable mechanical metamaterials based on hierarchical rotating structures. International Journal of Solids and Structures, 216: 145-155. (IF:3.9)

2020:

  • Lin QY, Fan ZJ*, Wang WJ, Yan ZX, Zheng QZ, Mei XS (2020), The effect of spot overlap ratio on femtosecond laser planarization processing of sic ceramics. Optics & Laser Technology, 129, 106270. (IF:3.867)
  • Duan WQ, Mei XS, Fan ZJ*, Chen JM, Zhang YF (2020), Dynamic change process of recast layer in Nd: YAG millisecond laser trepan drilling. Journal of the Optical Society of America B, 37(3). (IF:2.106)
  • Li X, Fan ZJ, Fan R, Lu Y* (2020), Two-dimensional mechanical metamaterials with bending-induced expansion behavior. Applied Physics Letters, 117(1): 011904. (IF:3.791)

2019:

  • Fan ZJ*, Wang RJ, Mei XS, Zhang XF, Sun XM, Cui JL, Duan WQ, Wang WJ (2019), Microstructure evolution in yttria stabilized zirconia during laser hybrid induction modification. Journal of Alloys and Compounds, 810, 151898. (IF:5.316)
  • Fan ZJ*, Sun XM, Mei XS, Wang RJ (2019), Enhanced molten salt resistance by sidewall pores repair during fs laser drilling of a thermal barrier-coated superalloy. Materials, 12(12), 1905. (IF:3.623)
  • Fan SF, Feng XB, Han Y, Fan ZJ, Lu Y* (2019). Nanomechanics of low-dimensional materials for functional applications. Nanoscale Horizons , 4(4):781-788. (IF:10.989)
  • Fan ZJ*, Duan WQ, Zhang XF, Mei XS, Wang WJ, Cui JL (2019), Influence of preheating on the microstructure evolution of laser re-melting thermal barrier coatings/Ni-based single crystal superalloy multilayer system. Materials, 12(19), 3088. (IF:3.623)
  • Zheng QZ, Fan ZJ, Jiang GD, Pan AF, Yan ZX, Lin QY, Cui JL*, Wang WJ, Mei XS (2019), Mechanism and morphology control of underwater femtosecond laser microgrooving of silicon carbide ceramics. Optics Express, 27(19): 26264-26280. (IF:3.894)

Before 2017:

  • Fan ZJ, Wang KD, Dong X*, Wang RJ, Duan WQ, Mei XS, Wang WJ, Cui JL, Zhang S, Xu CY (2017), The role of the surface morphology and segmented cracks on the damage forms of laser re-melted thermal barrier coatings in presence of a molten salt (Na2SO4+V2O5), Corrosion Science, 277: 56-67. ( IF:7.206)
  • Fan ZJ, Dong X, Wang KD*, Duan WQ, Wang RJ, Mei XS, Wang WJ, Cui JL, Yuan X, Xu CY (2016), Effect of drilling allowance on tbc delamination, spatter and re-melted cracks characteristics in laser drilling of TBC coated superalloys. International Journal of Machine Tools & Manufacture, 106: 1-10. (IF:7.880)
  • Fan ZJ, Wang KD, Dong X*, Wang RJ, Duan WQ, Zhang Shuai, Mei XS, Wang WJ (2017), Novel route of a self-healing film preparation in laser re-melted thermal barrier coatings. Journal of Alloys and Compounds, 723: 743-750. (IF:5.316)
  • Fan ZJ, Wang KD, Dong X*, Duan WQ, Wang RJ, Mei XS, Wang WJ, Cui JL, Zhang Shuai, Xu CY, (2017), Evaluation of microstructural evolution and corrosion types in ultrasonic assisted laser re-melted thermal barrier coatings under exposure to molten salts. Materials Letters, 188:145-148. (IF:3.423)
  • Fan ZJ, Wang KD, Dong X*, Wang RJ, Duan WQ, Mei XS, Wang WJ, Zhang Shuai, Xu CY (2017), Enhanced cyclic oxidation resistance through the self-healing of segmented cracks using nano-Al2O3/Ni-20wt.%Al particles in laser re-melted thermal barrier coatings. Materials Letters, 201:156-160. (IF:3.423)
  • Fan ZJ, Wang KD, Dong X*, Duan WQ, Mei XS, Wang WJ, Cui JL, Lv J (2015), Influence of columnar grain microstructure on thermal shock resistance of laser re-melted ZrO2-7 wt.% Y2O3 coatings and their failure mechanism. Surface & Coatings Technology, 277:188-196. (IF:4.158)