期刊论文

26. X.B. Wang, P. Jiang*, Y.J. Tang, P.F. Cheng, W.X. Zhang. Fast calculation method for predicting the morphology of steady-state ablation[J]. Coatings, 2022, 12(9): 1270. https://doi.org/10.3390/coatings12091270.

25. X.B. Wang, P. Jiang*, Y.J. Tang, W.X. Zhang, S.B. Shi. Microstructure-based thermochemical ablation model of carbon/carbon-fiber composites[J]. Materials, 2022, 15(16): 5695. https://doi.org/10.3390/ma15165695.

24. 李定骏, 杨镠育, 孙帆, 江鹏*, 陈艺文, 王铁军. 预热温度对热障涂层表面裂纹形成的影响[J]. 航空学报, 2022, 43(6): 526184-526184. DOI: 10.7527/S1000-6893.2021.26184.

23. D.J. Li, P. Jiang*, X.H. Yuan, J.P. Zhang, X.Y. Cao. Water-droplet erosion behavior of high-velocity oxygen-fuel-sprayed coatings for steam turbine blades[J]. Corrosion Review, 2021, 12(1): 1-11. https://doi.org/10.1515/corrrev-2021-0049.

22. D.J. Li, F. Sun, C. Ye, F. Sun, P. Jiang*, J.P. Zhang, Y.W. Chen, X.H. Yuan. Mechanical-chemical coupling effects on an environmental barrier coating system under high-temperature water vapour conditions[J]. Materials, 2021, 14(19), 5907. https://doi.org/10.3390/ma14195907.

21. Y. Zhao*, F. Sun, P. Jiang*, Y.L. Sun. Effects of roughness on stresses in an oxide scale formed on a superalloy substrate[J]. Coatings, 2021, 11(4): 479. https://doi.org/10.3390/coatings11040479.

20. D.X. Li, P. Jiang, R.H. Gao, F.Sun, X.C. Jin*, X.L. Fan*. Experimental and numerical investigation on the thermal and mechanical behaviours of thermal barrier coatings exposed to CMAS corrosion[J]. Journal of Advanced Ceramics, 2021, 10(3): 551-564. https://doi.org/10.1007/s40145-021-0457-2.

19. P.F. Liu, P. Jiang, Y.L. Sun, R. Xu, T.J. Wang, W.X. Zhang*. Numerical Analysis of stress evolution in thermal barrier coating system during two-stage growth of heterogeneous oxide[J]. Ceramics International, 2021, 47(10): 14311-14319. https://doi.org/10.1016/j.ceramint.2021.01.292.

18. C.L. Li, X.C. Jin*, W. Zhao, J.J. Yang, P. Jiang, X.L. Fan*. Detecting the erosion of atmosphere-plasma-sprayed thermal barrier coating system using luminescent multi-sublayers[J]. Ceramics International, 2021, 47(10): 14689-14692. https://doi.org/10.1016/j.ceramint.2021.02.042.

17. P. Jiang, L.Y. Yang, Y.L. Sun, D.J. Li, T.J. Wang*. Local residual stress evolution of highly irregular thermally grown oxide layer in thermal barrier coatings[J]. Ceramics International, 2020, 47(8): 10990-10995. https://doi.org/10.1016/j.ceramint.2020.12.220.

16. 吕伯文, 江鹏, 李定骏, 王铁军*. 重型燃气轮机高温叶片热障涂层烧结问题研究进展[J]. 中国材料进展, 2020, 2020(11): 855-870. DOI: 10.7502/j.issn.1674-3962.202007024.

15. P. Jiang, L.Y. Yang, Y.L. Sun, D.J. Li, T.J. Wang*. Nondestructive measurements of residual stress in air plasma-sprayed thermal barrier coatings[J]. Journal of the American Ceramic Society, 2020. https://doi.org/10.1111/jace.17550.

14. P. Jiang*, C. Ye. Recession of environmental barrier coatings under high-temperature water vapour conditions: a theoretical model[J]. Materials, 2020, 13(20): 4494. https://doi.org/10.3390/ma13204494.

13. Z. Qu, P. Jiang, W.X. Zhang*. Development and application of infrared thermography non-destructive testing techniques[J]. Sensors, 2020,20(14): 3851. https://doi.org/10.3390/s20143851.

12. F. Sun, X.L. Fan*, T. Zhang, P. Jiang, J.J. Yang*. Numerical analysis of the influence of pore microstructure on thermal conductivity and Young's modulus of thermal barrier coating[J]. Ceramics International, 2020, 46(15): 24326-24332. https://doi.org/10.1016/j.ceramint.2020.06.214.

11. C. Ye, P. Jiang*. Accurate residual stress measurement as a function of depth in environmental barrier coatings via a combination of X-ray diffraction and Raman spectroscopy[J]. Ceramics International, 2020, 46(8): 12613-12617. https://doi.org/10.1016/j.ceramint.2020.02.025.

10. X.X. Yang, P. Jiang, F. Sun, L.Y. Yang, X.L. Fan*. A pyrolysis heating rate based pressureless method for preparing dense and crack-free polymer-derived silicon oxycarbide bulk ceramics[J]. Ceramics International, 2020, 46(8): 10392-10399. https://doi.org/10.1016/j.ceramint.2020.01.037.

9.  X.K. Wang, X.L. Fan*, Y.L. Sun, R. Xu. P. Jiang. Modelling and analysis of the oxide growth coupling behaviour of thermal barrier coatings[J]. Journal of Materials Science, 2019, 54(6): 10270-10283. https://doi.org/10.1007/s10853-019-03620-7.

8.  P. Jiang, X.L. Fan*, Y.L. Sun, H.T. Wang, L.C. Su, T.J. Wang*. Thermal-cycle dependent residual stress within the crack-susceptible zone in thermal barrier coating system[J]. Journal of the American Ceramic Society, 2018, 101: 4256-4261. https://doi.org/10.1111/jace.15699.

7.  C.L. Li, X.L. Fan*, P. Jiang, X.C. Jin. Delamination-indicating of atmosphere-plasma-sprayed thermal barrier coating system using Eu3+ luminescence mapping[J]. Materials Letters, 2018, 222:41-44. https://doi.org/10.1016/j.matlet.2018.03.116.

6.  范学领，张光辉，江鹏。瞬态热载荷下热障涂层系统界面断裂研究[J]. 固体火箭技术，2017, 40(6): 765-769. DOI: 10.7673/j.issn.1006-2793.2017.06.016.

5.  P. Jiang, X.L. Fan*, Y.L. Sun, D.J. Li, T.J. Wang*. Bending-driven failure mechanism and modelling of double-ceramic-layer thermal barrier coating system[J]. International Journal of Solids and Structures, 2018, 130-131:11-20. https://doi.org/10.1016/j.ijsolstr.2017.10.024.

4.  B. Li, X.L. Fan*, D.J. Li, P. Jiang. Design of thermal barrier coatings thickness for gas turbine blade based on finite element analysis[J]. Mathematical Problems in Engineering, 2017: 2147830, 13 pages. https://doi.org/10.1155/2017/2147830.

3.  X.C. Jin, X.L. Fan*, P. Jiang, Q. Wang. Microstructure evolution and ablation mechanism of C/C and C/C-SiC composites under a hypersonic flowing propane torch[J]. Advanced Engineering Materials, 2017, 19(11): 1700239. https://doi.org/10.1002/adem.201700239.

2.  P. Jiang, X.L. Fan*, Y.L. Sun, D.J. Li, B. Li, T.J. Wang*. Competition mechanism of interfacial cracks in thermal barrier coating system[J]. Materials & Design, 2017, 132: 559-566. https://doi.org/10.1016/j.matdes.2017.07.018.

1.  X.L. Fan*, P. Jiang, B. Li, X.C. Jin, Y. Zhao. Experimental and numerical evaluation of the ablation process of carbon/carbon composites using high velocity oxygen fuel system[J]. Advances in Materials Science and Engineering, 2017, 1543203, 7 pages. https://doi.org/10.1155/2017/1543203.

专利

发明专利

  1. 王铁军、江鹏、王彬文、杨镠育，一种高温防热结构力热参数测量装置与方法，ZL202210832072.7，2022.10.04

  2. 王铁军、江鹏、孙帆，空天飞行器结构用梯度热冲击与热疲劳试验装置与方法，ZL202210861855.8，2022.10.28

  3. 王铁军、江鹏、王销彬，一种空天飞机热环境模拟用模块化超高温加热装置及方法，ZL202210930388.X，2022.11.04

  4. 王铁军、江鹏、王销彬，一种空天飞机热环境模拟用模块化加热装置及方法，ZL202210930363.X，2022.11.04

  5. 王铁军、江鹏、范学领、李定骏、李彪、吕伯文，一种多场耦合环境模拟及在线监测系统，ZL201610278879.5，2018.07.17

  6. 王铁军、江鹏、范学领、李定骏、李彪、吕伯文，一种基于卤素灯共聚焦加热技术的梯度热冲击试验装置，ZL201610279068.7，2018.04.17

  7. 王铁军、吕伯文、江鹏、宋岩、李定骏、范学领，手持式带水平校准及压力测量的多功能磨抛装置及使用方法，ZL201510589603.4，2017.10.20

  8. 王铁军、乔壮、李鸿宇、江鹏、王彬文，一种飞机耐高温构件三维表面振动疲劳损伤测量方法，ZL202210897233.0，2022.11.08

  9. 李定骏、王铁军、范学领、江鹏、李彪、张伟旭，热喷涂实验用多功能组合夹具，ZL201521013763.6，2016.06.08

  10. 李彪、王铁军、范学领、李定骏、江鹏，一种涡轮叶片热障涂层厚度优化设计方法，ZL201610854678.5，2019.11.08

实用新型专利

  1. 江鹏、孙帆、杨镠育、王铁军，适用于不同曲率轴件、管件及焊接结构的柔性加热装置，ZL202021168091.7，2021.1.15

  2. 江鹏、王铁军、李定骏、杨镠育，一种基于SEM电镜的微型多功用原位试验台，ZL201822216992.8，2019.8.30

  3. 江鹏、王铁军、李定骏、杨镠育，一种基于SEM电镜的微型热力耦合原位加载台，ZL201822219280.1，2019.8.30

  4. 江鹏、王铁军、李定骏、杨镠育，一种扫描电镜下的超高温断裂原位观测装置，ZL201822215564.3，2019.8.30

  5. 江鹏、杨镠育、孙帆、王铁军，一种高温升率、极端高温热冲击试验装置，ZL202021169515.1，2021.1.12

  6. 王铁军、王彬文、江鹏，基于红外辐射加热的清洁节能型铝合金熔炼炉设备，ZL202021137693.6，2021.1.12

  7. 王铁军、王彬文、江鹏，基于水冷-加热双排石英灯管的超高温红外辐射加热装置，ZL202021139230.3，2020.11.27

软件著作权

  1. 高温升率石英灯辐照加热动态变温控制软件，2020SR1051778，2020.9.7