Host Brief Introduction

1.    Zhou C, Cao H, Wang X, Ding J. Second-order Iterative Time-rearrangement Synchrosqueezing Transform and its application to rolling bearing fault diagnosis. Measurement. 2022;190:110730.

2.    Wang D, Cao HR, Zhang YY. Blade tip characteristics of turbine disks with cracks. Engineering Failure Analysis. 2022;133.

3.    Sun YC, Cao HR, Wei XK. Micromechanism of Plastic Accumulation and Damage Initiation in Bearing Steels under Cyclic Shear Deformation: A Molecular Dynamics Study. Machines. 2022;10(3).

4.    Shi J, Jin X, Cao H. Chatter stability analysis in Micro-milling with aerostatic spindle considering speed effect. Mechanical Systems and Signal Processing. 2022;169:108620.

5.    Shi J, Cao H, Jin X. Dynamics of 5-DOF aerostatic spindle with time-varying coefficients of air bearing. Mechanical Systems and Signal Processing. 2022;172:109005.

6.    Li D, Cao H, Chen X. Active control of milling chatter considering the coupling effect of spindle-tool and workpiece systems. Mechanical Systems and Signal Processing. 2022;169:108769.

7.    Guo W, Ma TY, Cao HR, Zi YY, Wei XK. Numerical analysis of rolling contact fatigue crack initiation Considering material microstructure. Engineering Failure Analysis. 2022;138.

8.    Fu Y, Cao HR, Xuefeng C, Ding J. Task-incremental broad learning system for multi-component intelligent fault diagnosis of machinery. Knowledge-Based Systems. 2022;246.

9.    Fu Y, Cao HR, Chen XF, Ding JM. Broad auto-encoder for machinery intelligent fault diagnosis with incremental fault samples and fault modes. Mechanical Systems and Signal Processing. 2022;178.

10.   Wang L, Cao H, Liu Z, Fu Y, Ding J. Joint discriminative and shared dictionary learning with dictionary extension strategy for bearing fault classification. Measurement. 2021;186:110017.

11.   Su S, Cao H, Zhang Y. Dynamic modeling and characteristics analysis of cylindrical roller bearing with the surface texture on raceways. Mechanical Systems and Signal Processing. 2021;158.

12.   Luo W, Qiao B, Shen Z, Yang Z, Cao H, Chen X. Investigation on the influence of spalling defects on the dynamic performance of planetary gear sets with sliding friction. Tribology International. 2021;154.

13.   Li D, Cao H, Chen X. Fuzzy control of milling chatter with piezoelectric actuators embedded to the tool holder. Mechanical Systems and Signal Processing. 2021;148.

14.   He D, Cao H. Downsampling-based synchrosqueezing transform and its applications on large-scale vibration data. Journal of Sound and Vibration. 2021;496.

15.   Fu Y, Cao HR, Chen XF. Adaptive Broad Learning System for High-Efficiency Fault Diagnosis of Rotating Machinery. Ieee Transactions on Instrumentation and Measurement. 2021;70.

16.   Diwu Z, Cao H, Wang L, Chen X. Collaborative Double Sparse Period-Group Lasso for Bearing Fault Diagnosis. Ieee Transactions on Instrumentation and Measurement. 2021;70.

17.   付洋, 曹宏瑞, 郜伟强, 高文辉. 数字孪生驱动的航空发动机涡轮盘剩余寿命预测. 机械工程学报. 2021;57(22):106-13.

18.   曹宏瑞, 李登辉, 刘金鑫, 张兴武, 陈雪峰. 智能主轴高速铣削颤振的模糊控制方法研究. 机械工程学报. 2021;57(13):55-62.

19.   Wang L, Liu Z, Cao H, Zhang X. Subband averaging kurtogram with dual-tree complex wavelet packet transform for rotating machinery fault diagnosis. Mechanical Systems and Signal Processing. 2020;142.

20.   Shi J, Cao H, Maroju NK, Jin X. Dynamic Modeling of Aerostatic Spindle With Shaft Tilt Deformation. Journal of Manufacturing Science and Engineering-Transactions of the Asme. 2020;142(2).

21.   Shi J, Cao H, Chen X. Effect of angular misalignment on the dynamic characteristics of externally pressurized air journal bearing. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology. 2020;234(2):205-28.

22.   Shi F, Cao H, Zhang X, Chen X. A Reinforced k-Nearest Neighbors Method With Application to Chatter Identification in High-Speed Milling. Ieee Transactions on Industrial Electronics. 2020;67(12):10844-55.

23.   Shi F, Cao H, Wang Y, Feng B, Ding Y. Chatter detection in high-speed milling processes based on ON-LSTM and PBT. International Journal of Advanced Manufacturing Technology. 2020;111(11-12):3361-78.

24.   Niu L, Cao H, Hou H, Wu B, Lan Y, Xiong X. Experimental observations and dynamic modeling of vibration, characteristics of a cylindrical roller bearing with roller defects. Mechanical Systems and Signal Processing. 2020;138.

25.   Luo W, Qiao B, Shen Z, Yang Z, Cao H, Chen X. Influence of Sliding Friction on the Dynamic Characteristics of a Planetary Gear Set With the Improved Time-Varying Mesh Stiffness. Journal of Mechanical Design. 2020;142(7).

26.   Cao H, Wang X, He D, Chen X. An improvement of time-reassigned synchrosqueezing transform algorithm and its application in mechanical fault diagnosis. Measurement. 2020;155.

27.   Cao H, Su S, Jing X, Li D. Vibration mechanism analysis for cylindrical roller bearings with single/multi defects and compound faults. Mechanical Systems and Signal Processing. 2020;144.

28.   康婷, 曹宏瑞. 切削工况下机床主轴回转精度动态预测方法. 机械工程学报. 2020;56(17):240-8.

29.   曹宏瑞, 景新, 苏帅鸣, 陈雪峰. 中介轴承故障动力学建模与振动特征分析. 机械工程学报. 2020;56(21):89-99.

30.   Zhang X, Yin Z, Gao J, Liu J, Gao RX, Cao H, et al. Discrete Time-Delay Optimal Control Method for Experimental Active Chatter Suppression and Its Closed-Loop Stability Analysis. Journal of Manufacturing Science and Engineering-Transactions of the Asme. 2019;141(5).

31.   Zhang X, Wang C, Liu J, Yan R, Cao H, Chen X. Robust active control based milling chatter suppression with perturbation model via piezoelectric stack actuators. Mechanical Systems and Signal Processing. 2019;120:808-35.

32.   Xi S, Cao H, Zhang X, Chen X. Zoom synchrosqueezing transform-based chatter identification in the milling process. International Journal of Advanced Manufacturing Technology. 2019;101(5-8):1197-213.

33.   Xi S, Cao H, Chen X. Dynamic modeling of spindle bearing system and vibration response investigation. Mechanical Systems and Signal Processing. 2019;114:486-511.

34.   Wang C, Zhang X, Yan R, Chen X, Cao H. Multi harmonic spindle speed variation for milling chatter suppression and parameters optimization. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology. 2019;55:268-74.

35.   Wang C, Zhang X, Qiao B, Cao H, Chen X. Dynamic Force Identification in Peripheral Milling Based on CGLS Using Filtered Acceleration Signals and Averaged Transfer Functions. Journal of Manufacturing Science and Engineering-Transactions of the Asme. 2019;141(6).

36.   Wang C, Zhang X, Liu J, Yan R, Cao H, Chen X. Multi harmonic and random stiffness excitation for milling chatter suppression. Mechanical Systems and Signal Processing. 2019;120:777-92.

37.   Wang C, Zhang X, Liu J, Cao H, Chen X. Adaptive vibration reshaping based milling chatter suppression. International Journal of Machine Tools & Manufacture. 2019;141:30-5.

38.   Wang C, Zhang X, Chen X, Cao H. Time-Varying Chatter Frequency Characteristics in Thin-Walled Workpiece Milling With B-Spline Wavelet on Interval Finite Element Method. Journal of Manufacturing Science and Engineering-Transactions of the Asme. 2019;141(5).

39.   Wang C, Qiao B, Zhanga X, Cao H, Chen X. TPA and RCSA based frequency response function modelling for cutting forces compensation. Journal of Sound and Vibration. 2019;456:272-88.

40.   Shi J, Cao H, Jin X. Investigation on the static and dynamic characteristics of 3-DOF aerostatic thrust bearings with orifice restrictor. Tribology International. 2019;138:435-49.

41.   Shi J, Cao H, Chen X. Effect of angular misalignment on the static characteristics of rotating externally pressurized air journal bearing. Science China-Technological Sciences. 2019;62(9):1520-33.

42.   Shi F, Cao H, Zhang X, Chen X. A chatter mitigation technique in milling based on H-infinity-ADDPMS and piezoelectric stack actuators. International Journal of Advanced Manufacturing Technology. 2019;101(9-12):2233-48.

43.   Li Y, Cao H, Tang K. A general dynamic model coupled with EFEM and DBM of rolling bearing-rotor system. Mechanical Systems and Signal Processing. 2019;134.

44.   Li D, Cao H, Zhang X, Chen X, Yan R. Model predictive control based active chatter control in milling process. Mechanical Systems and Signal Processing. 2019;128:266-81.

45.   Li D, Cao H, Liu J, Zhang X, Chen X. Milling chatter control based on asymmetric stiffness. International Journal of Machine Tools & Manufacture. 2019;147.

46.   He D, Cao H, Wang S, Chen X. Time-reassigned synchrosqueezing transform: The algorithm and its applications in mechanical signal processing. Mechanical Systems and Signal Processing. 2019;117:255-79.

47.   Cao H, Shi F, Li Y, Li B, Chen X. Vibration and stability analysis of rotor-bearing-pedestal system due to clearance fit. Mechanical Systems and Signal Processing. 2019;133.

48.   Cao H, Li B, Li Y, Kang T, Chen X. Model-based error motion prediction and fit clearance optimization for machine tool spindles. Mechanical Systems and Signal Processing. 2019;133.

49.   Cao H, Kang T, Chen X. Noise analysis and sources identification in machine tool spindles. Cirp Journal of Manufacturing Science and Technology. 2019;25:26-35.

50.   景新, 曹宏瑞, 陈雪峰. 保持架打滑对航空发动机主轴承故障特征频率的影响. 航空动力学报. 2019;34(05):1145-52.

51.   Xi S, Cao H, Zhang X, Chen X. Zoom synchrosqueezing transform-based chatter identification in the milling process. The International Journal of Advanced Manufacturing Technology. 2018.

52.   Xi S, Cao H, Chen X, Niu L. A Dynamic Modeling Approach for Spindle Bearing System Supported by Both Angular Contact Ball Bearing and Floating Displacement Bearing. Journal of Manufacturing Science and Engineering-ASME Transaction. 2018;140(2):021014.

53.   Wang D, Tsui K-L, Miao Q. Prognostics and Health Management: A Review of Vibration Based Bearing and Gear Health Indicators. Ieee Access. 2018;6.

54.   Wang CX, Zhang XW, Liu YL, Cao HR, Chen XF. Stiffness variation method for milling chatter suppression via piezoelectric stack actuators. International Journal of Machine Tools & Manufacture. 2018;124:53-66.

55.   Wang C, Zhang X, Cao H, Chen X, Xiang J. Milling stability prediction and adaptive chatter suppression considering helix angle and bending. International Journal of Advanced Manufacturing Technology. 2018;95(9-12):3665-77.

56.   Shi F, Cao H, Li D, Chen X, Zhang X. Active chatter control in high speed milling processes based on H∞ almost disturbance decoupling problem. Procedia CIRP. 2018;78:37-42.

57.   Li D, Cao H, Shi F, Zhang X, Chen X. Model Predictive Control Based Chatter Suppression in Milling Process via Piezoelectric Stack Actuators. Procedia CIRP. 2018;78:31-6.

58.   Guo W, Cao H, Zi Y, He Z. Material analysis of the fatigue mechanism of rollers in tapered roller bearings. Science China-Technological Sciences. 2018;61(7):1003-11.

59.   Cao H, Yue Y, Chen X, Zhang X. Chatter detection based on synchrosqueezing transform and statistical indicators in milling process. International Journal of Advanced Manufacturing Technology. 2018;95(1-4):961-72.

60.   Cao H, Niu L, Xi S, Chen X. Mechanical model development of rolling bearing-rotor systems: A review. Mechanical Systems and Signal Processing. 2018;102:37-58.

61.   Cao H, He D, Xi S, Chen X. Vibration signal correction of unbalanced rotor due to angular speed fluctuation. Mechanical Systems and Signal Processing. 2018;107:202-20.

62.   陈雪峰, 张兴武, 曹宏瑞. 智能主轴状态监测诊断与振动控制研究进展. 机械工程学报. 2018.

63.   Niu L, Cao H, Xiong X. Dynamic modeling and vibration response simulations of angular contact ball bearings with ball defects considering the three-dimensional motion of balls. Tribology International. 2017;109:26-39.

64.   Cao HR, Dorgeloh T, Riemer O, Brinksmeier E. Adaptive separation of unbalance vibration in air bearing spindles. In: Teti R, editor. 10th Cirp Conference on Intelligent Computation in Manufacturing Engineering - Cirp Icme '16. Procedia CIRP. 622017. p. 351-6.

65.   Cao H, Zhou K, Chen X, Zhang X. Early chatter detection in end milling based on multi-feature fusion and 3 sigma criterion. International Journal of Advanced Manufacturing Technology. 2017;92(9-12):4387-97.

66.   Cao H, Zhang X, Chen X. The concept and progress of intelligent spindles: A review. International Journal of Machine Tools & Manufacture. 2017;112:21-52.

67.   Cao H, Yue Y, Chen X, Zhang X. Chatter detection in milling process based on synchrosqueezing transform of sound signals. International Journal of Advanced Manufacturing Technology. 2017;89(9-12):2747-55.

68.   Cao H, Riemer O, Brinksmeier E. Dynamic modelling and vibration simulation of air bearing spindle systems due to unbalance. International Journal of Mechatronics and Manufacturing Systems. 2017;10(3):260-76.

69.   Cao H, Li D, Yue Y. Root Cause Identification of Machining Error Based on Statistical Process Control and Fault Diagnosis of Machine Tools. Machines. 2017;5(3).

70.   Xi ST, Cao HR, Chen XF, editors. Zoom Synchrosqueezing Transform for Instantaneous Speed Estimation of High Speed Spindle. Materials Science Forum; 2016: Trans Tech Publications.

71.   Niu L, Cao H, He Z, Li Y. An investigation on the occurrence of stable cage whirl motions in ball bearings based on dynamic simulations. Tribology International. 2016;103:12-24.

72.   Cao H, Zhou K, Chen X. Stability-based selection of cutting parameters to increase material removal rate in high-speed machining process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2016;230(2):227-40.

73.   Cao H, Xi S, Chen X, Wang S. Zoom synchrosqueezing transform and iterative demodulation: Methods with application. Mechanical Systems and Signal Processing. 2016;72:695-711.

74.   Cao H, Li Y, Chen X. A New Dynamic Model of Ball-Bearing Rotor Systems Based on Rigid Body Element. Journal of Manufacturing Science and Engineering - ASME Transaction. 2016;138(7):071007.

75.   Cao H, Fan F, Zhou K, He Z. Wheel-bearing fault diagnosis of trains using empirical wavelet transform. Measurement. 2016;82:439-49.

76.   Zhang X, Wang B, Cao H, Li B, Chen X. Operational Reliability Assessment of Compressor Gearboxes with Normalized Lifting Wavelet Entropy from Condition Monitoring Information. Entropy. 2015;17(5):3479-500.

77.   Zhang C, Li B, Chen B, Cao H, Zi Y, He Z. Weak fault signature extraction of rotating machinery using flexible analytic wavelet transform. Mechanical Systems and Signal Processing. 2015;64:162-87.

78.   Xi S, Cao H, Chen X, Zhang X, Jin X. A frequency-shift synchrosqueezing method for instantaneous speed estimation of rotating machinery. Journal of Manufacturing Science and Engineering - ASME Transaction. 2015;137(3):031012.

79.   Wan Z, Cao H, Zi Y, He W, Chen Y. Mesh stiffness calculation using an accumulated integral potential energy method and dynamic analysis of helical gears. Mechanism and Machine Theory. 2015;92:447-63.

80.   Sun C, He Z, Cao H, Zhang Z, Chen X, Zuo MJ. A non-probabilistic metric derived from condition information for operational reliability assessment of aero-engines. Reliability, IEEE Transactions on. 2015;64(1):167-81.

81.   Niu L, Cao H, He Z, Li Y. A systematic study of ball passing frequencies based on dynamic modeling of rolling ball bearings with localized surface defects. Journal of Sound and Vibration. 2015;357:207-32.

82.   Li Y, Cao H, Niu L, Jin X. A General Method for the Dynamic Modeling of Ball Bearing–Rotor Systems. Journal of Manufacturing Science and Engineering - ASME Transaction. 2015;137(2):021016-1-11.

83.   Li Y, Cao H, Chen X. Modelling and vibration analysis of machine tool spindle system with bearing defects. International Journal of Mechatronics and Manufacturing Systems. 2015;8(1-2):33-48.

84.   Guo W, Cao H, He Z, Yang L. Fatigue Life Analysis of Rolling Bearings Based on Quasistatic Modeling. Shock and Vibration. 2015;501:982350.

85.   Chen X, Cai G, Cao H, Xin W. Condition assessment for automatic tool changer based on sparsity-enabled signal decomposition method. Mechatronics. 2015;31:50-9.

86.   Cao H, Zhou K, Chen X. Chatter identification in end milling process based on EEMD and nonlinear dimensionless indicators. International Journal of Machine Tools and Manufacture. 2015;92:52-9.

87.   Cao H, Xi S, Cheng W. Model Updating of Spindle Systems Based on the Identification of Joint Dynamics. Shock and Vibration. 2015;501:894307.

88.   牛蔺楷, 曹宏瑞, 何正嘉. 考虑三维运动和相对滑动的滚动球轴承局部表面损伤动力学建模研究. 机械工程学报. 2015;51(19):53-9.

89.   Zhang C, Li B, Chen B, Cao H, Zi Y, He Z. Periodic impulsive fault feature extraction of rotating machinery using dual-tree rational dilation complex wavelet transform. Journal of Manufacturing Science and Engineering- ASME Transaction. 2014;136(5):051011.

90.   Wang Y, Cao H, Zi Y, Wei X, Tsui K-L, editors. An accelerated wear model for magnetic heads with respect to sensory data. Prognostics and System Health Management Conference (PHM-2014 Hunan), 2014; 2014: IEEE.

91.   Wan Z, Cao H, Zi Y, He W, He Z. An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack. Engineering Failure Analysis. 2014;42:157-77.

92.   Niu L, Cao H, He Z, Li Y. Dynamic Modeling and Vibration Response Simulation for High Speed Rolling Ball Bearings With Localized Surface Defects in Raceways. Journal of Manufacturing Science and Engineering-ASME Transaction. 2014;136(4):041015-1-16.

93.   Cheng W ZZ, Cao H, He Z, Zhu G. . A Comparative Study of Information-Based Source Number Estimation Methods and Experimental Validations on Mechanical Systems. Sensors. 2014; 14(5):7625-7646.

. Sensors 2014;14(5):7625-46.

94.   Cheng W, Zhang Z, Cao H, He Z, Zhu G. A Comparative Study of Information-Based Source Number Estimation Methods and Experimental Validations on Mechanical Systems. Sensors. 2014;14(5):7625-46.

95.   Chen Y, Zi Y, Cao H, He Z, Sun H. A data-driven threshold for wavelet sliding window denoising in mechanical fault detection. Sci China Technol Sci. 2014;57(3):589-97.

96.   汪友明, 王文庆, 沈建冬, 曹宏瑞. 一种算子自定义小波薄板单元及应用. 计算力学学报. 2014;31(2):235-40.

97.   牛蔺楷, 曹宏瑞, 何正嘉. 滚动球轴承损伤故障动力学建模与仿真. 中国科技论文. 2014;9(8):902-7.

98.   牛蔺楷, 曹宏瑞, 何正嘉. 具有局部表面损伤的滚动球轴承动力学建模. 振动 测试与诊断. 2014;34(2):356-60.

99.   李亚敏, 曹宏瑞. 机床主轴轴承损伤的振动机理研究. 第 11 届全国转子动力学学术讨论会 (ROTDYN2014) 论文集 (上册). 2014.

100. 何正嘉, 曹宏瑞, 訾艳阳, 李兵. 机械设备运行可靠性评估的发展与思考. 机械工程学报. 2014;50(2):171-86.

101. 郭伟, 曹宏瑞, 何正嘉. 近年滚动接触疲劳的确定性研究寿命模型综述. CHINESE JOURNAL OF APPLIED MECHANICS. 2014;31(0).

102. 曹宏瑞, 李亚敏, 何正嘉, 朱永生. 高速滚动轴承-转子系统时变轴承刚度及振动响应分析. 机械工程学报. 2014;50(15):73-81.

103. 曹宏瑞, 李亚敏, 成玮, 何正嘉. 局部损伤滚动轴承建模与转子系统振动仿真. 振动 测试与诊断. 2014;34(3):549-52.

104. Yamin L, Hongrui C, Yongsheng Z, editors. Study on nonlinear stiffness of rolling ball bearing under varied operating conditions. Assembly and Manufacturing (ISAM), 2013 IEEE International Symposium on; 2013 July 30 2013-Aug. 2 2013.

105. Niu L, Cao H, He Z. Dynamic Modeling and Vibration Response Simulation for Rolling Ball Bearings with Local Surface Defects. The Ninth International Conference on VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY. Nanjing2013.

106. Liu Z, Cao H, Chen X, He Z, Shen Z. Multi-fault classification based on wavelet SVM with PSO algorithm to analyze vibration signals from rolling element bearings. Neurocomputing. 2013;99(0):399-410.

107. Li B, Jin W, Han L, Cao H, He Z. A spring dashpot model for dynamic analysis of beam-like structure with clearance. Journal of Vibroengineering. 2013;15(3):1490-503.

108. Guo W, Cao H, He Z. Deterministic Life Models for Rolling Contact Fatigue:A Brief Review of Recent Trends. The Ninth International Conference on VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY. Nanjing2013.

109. Cao H, Li Y, He Z. Rolling bearing modeling with localized defects and vibration response simulation of a rotor-bearing system. The Ninth International Conference on VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY. Nanjing2013.

110. Cao H, Li B, He Z. Finite element model updating of machine-tool spindle systems Journal of Vibration and Acoustics, Transactions of the ASME. 2013;135(2):024503-1-4.

111. Cao H, Lei Y, He Z. Chatter identification in end milling process using wavelet packets and Hilbert–Huang transform. International Journal of Machine Tools and Manufacture. 2013;69(0):11-9.

112. 汪友明, 吴青, 曹宏瑞. 一维算子自定义小波有限元的构造方法研究. 应用力学学报. 2013;30(3):445-50.

113. 万志国, 訾艳阳, 曹宏瑞, 何正嘉, 王帅. 时变啮合刚度算法修正与齿根裂纹动力学建模. 机械工程学报. 2013;49(11):153-60.

114. 孙闯, 何正嘉, 张周锁, 陈雪峰, 曹宏瑞, 宁喜钰, et al. 基于状态信息的航空发动机运行可靠性评估. 机械工程学报. 2013;49(6):30-7.

115. 牛蔺楷, 曹宏瑞, 何正嘉. 滚动轴承表面损伤建模与冲击力的定量计算. 振动、测试与诊断. 2013;33(S1):5-8.

116. 何正嘉, 蔡改改, 申中杰, 曹宏瑞, 李兵. 基于机械诊断信息的设备运行可靠性研究. 中国工程科学. 2013(01):9-14.

117. 曹宏瑞, 何正嘉. 模型驱动的数字化加工过程状态监测与诊断. 振动、测试与诊断. 2013;33(4):550-4.

118. 曹宏瑞, 陈雪峰, 何正嘉. 主轴-切削交互过程建模与高速铣削参数优化. 机械工程学报. 2013;49(5):161-6.

119. Zhang X, Chen X, He Z, Cao H. The multivariable finite elements based on B-spline wavelet on the interval for 1D structural mechanics. Journal of Vibroengineering. 2012;14(1):363-80.

120. Cao HR, Li B, He ZJ. A joint stiffness identification method based on finite element modeling and frequency response functions. Journal of Vibroengineering. 2012;14(2):611-20.

121. Cao H, Niu L, He Z. Method for Vibration Response Simulation and Sensor Placement Optimization of a Machine Tool Spindle System with a Bearing Defect. Sensors. 2012;12(7):8732-54.

122. Cao H, Li B, He Z. Chatter stability of milling with speed-varying dynamics of spindles. International Journal of Machine Tools & Manufacture. 2012;52(1):50-8.

123. Cao H, Holkup T, Chen X, He Z. Study on characteristic variations of high-speed spindles induced by centrifugal expansion deformations. Journal of Vibroengineering. 2012;14(3):1278-91.

124. 曹宏瑞, 牛蔺楷, 何正嘉. 高速主轴轴承损伤建模与振动响应仿真研究. 振动与冲击(增刊). 2012;31:241-4.

125. 曹宏瑞, 李兵, 何正嘉. 高速主轴动力学建模及高速效应分析. 振动工程学报. 2012;25(2):103-9.

126. 曹宏瑞, 何正嘉, 訾艳阳. 高速滚动轴承力学特性建模与损伤机理分析. 振动与冲击. 2012;31(19):134-40.

127. 曹宏瑞, 何正嘉. 机床—主轴耦合系统动力学建模与模型修正. 机械工程学报. 2012;48(3):88-94.

128. 曹宏瑞, 兵 李, 陈雪峰, 何正嘉. 高速主轴离心膨胀及对轴承动态特性的影响. 机械工程学报. 2012;48(19):59-64.

129. Li B, Cao H, Yang Z, editors. Thermal analysis of axial driving system for numerically controlled machine tool. International Conference on Power Transmission, ICPT 2011, October 25, 2011 - October 29, 2011; 2011; Xi'an, China: Trans Tech Publications.

130. Li B, Cao H, He Z. The construction of one-dimensional Daubechies wavelet-based finite elements for structural response analysis. Journal of Vibroengineering. 2011;13(4):729-38.

131. Chen B, He Z, Chen X, Cao H, Cai G, Zi Y. A demodulating approach based on local mean decomposition and its applications in mechanical fault diagnosis. Measurement Science and Technology. 2011;22(5):055704.

132. Chen B, Chen X, Li B, He Z, Cao H, Cai G. Reliability estimation for cutting tools based on logistic regression model using vibration signals. Mechanical Systems and Signal Processing. 2011;25(7):2526-37.

133. Cao H, Li B, He ZJ. Study on modeling of digital machining process and its condition monitoring & diagnosis method. Adv Mater Res. 2011;411:622-625625.

134. Cao H, Holkup T, Altintas Y. A comparative study on the dynamics of high speed spindles with respect to different preload mechanisms. International Journal of Advanced Manufacturing Technology. 2011;57(9-12):871-83.

135. 陈保家, 陈雪峰, 李兵, 曹宏瑞, 蔡改改, 何正嘉. Logistic回归模型在机床刀具可靠性评估中的应用. 机械工程学报. 2011;47(18):158-64.

136. Holkup T, Cao H, Kolar P, Altintas Y, Zeleny J. Thermo-mechanical model of spindles. CIRP Annals-Manufacturing Technology. 2010;59(1):365-8.

137. Cao H, Altintas Y, Holkup T. Modeling and comparison of high speed spindle systems with different bearing preload mechanisms.  CIRP - 2nd International Conference, Process Machine Interactions; The University of British Columbia, Vancouver, Canada2010.

138. Tan J, Chen X, Wang J, Chen H, Cao H, Zi Y, et al. Study of frequency-shifted and re-scaling stochastic resonance and its application to fault diagnosis. Mechanical Systems and Signal Processing. 2009;23(3):811-22.

139. He Z, Cao H, Li Z, Zi Y, Chen X. The principle of second generation wavelet for milling cutter breakage detection. Science in China Series E-Technological Sciences. 2009;52(5):1312-22.

140. 丁锋, 何正嘉, 訾艳阳, 陈雪锋, 曹宏瑞, 谭继勇. 基于设备状态振动特征的比例故障率模型可靠性评估. 机械工程学报. 2009;45(12):89-94.

141. 陈雪峰, 曹宏瑞, 何正嘉. 数字化制造装备的主轴服役性能监测与诊断. 机械工程学报. 2009(05):140-6.

142. Ding F, He Z, Zi Y, Chen X, Tan J, Cao H, et al., editors. Application of support vector machine for equipment reliability forecasting. IEEE INDIN 2008: 6th IEEE International Conference on Industrial Informatics, July 13, 2008 - July 16, 2008; 2008; Daejeon, Korea, Republic of: Institute of Electrical and Electronics Engineers Inc.

143. Chen X, Li B, Cao H, He Z, editors. The condition monitoring and performance evaluating of digital manufacturing process. 1st International Conference on Intelligent Robotics and Applications, ICIRA 2008, October 15, 2008 - October 17, 2008; 2008; Wuhan, China: Springer Verlag.

144. Chen H, Chen X, Zi Y, Ding F, Cao H, Tan J, et al. An effective approach to rolling bearing diagnosis based on Adaptive Redundant Second-Generation Wavelet. International Journal of Materials and Product Technology. 2008;33(1-2):65-78.

145. Cao H, Chen,Xuefeng, Zi Y, Ding F, Huaxin C, Jiyong T, et al. End milling tool breakage detection using lifting scheme and Mahalanobis distance. International Journal of Machine Tools and Manufacture. 2008;48(2):141-51.

Republication

No entries were found.
Republication Author Republication date Publisher
有限元方法及其工程案例 陈雪峰,李兵,曹宏瑞 2014-07-01 科学出版社