Shock tube measurements of ignition delay times for the ethane-dimethyl ether blends (PDF)
发布时间：2025-04-30
点击次数：
- 发布时间：
- 2025-04-30
- 论文名称：
- Shock tube measurements of ignition delay times for the ethane-dimethyl ether blends (PDF)
- 发表刊物：
- Energy & Fuels
- 摘要：
- Ignition delay times of ethane/dimethyl ether (DME) blends (DME blending ratio of 0%, 20%, 50% and 100%) were studied behind reflected shock waves at pressures of 2.0 and 20.0 atm, temperatures of 1100-1500K and equivalence ratios of 0.5, 1.0 and 2.0. Fuel mixtures were prepared with a constant argon dilution ratio for reasonable comparison. Two previous models including both ethane and DME chemistry were used to validate against the measured data. Subsequently, the chemical analysis was performed to get an insight into the effect of the equivalence ratio and blending ratio on the ignition delay time
- 合写作者：
- Zhang JX, Hu EJ, Pan L, Zhang ZH, Huang ZH
- 卷号：
- 2013, 27(10): 6247-6254
- 页面范围：
- 6247-6254
- 是否译文：
- 否
- 发表时间：
- 2013-10-16
- 上一条：Shock tube measurements and kinetic study on ignition delay times of lean DME-n-butane blends at elevated pressures (PDF)
- 下一条：Effect of the diesel injection timing and the pilot quantity on the combustion characteristics and the fine-particle emissions in a micro-diesel pilot-ignited natural-gas engine (PDF)