English Version

  Hui ZHANG

  Associated professor,  Ph.D

• Institute of Design Science and Basic Components
• Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System
• School of Mechanical Engineering

E-mail：zhanghui7@xjtu.edu.cn

Address：Xingqing Campus， West second building - East 259

                  IHarbour Campus， 2 building 2-4058

WeChat：Scan it！

2019.6 ~ Now

Associated professor, School of Mechanical Engineering, Xi'an Jiaotong University

2016.10 ~ 2019.6

Lecturer&Postdoctor, School of Mechanical Engineering, Xi'an Jiaotong University

2011.9 ~ 2016.9

Ph.D Candidate, School of Mechanical Engineering, Xi'an Jiaotong University

2013.11 ~ 2014.11

Ph.D joint student, Department of Mechanical and Biomedical Enginerring, City University of HONG KONG

2010.9 ~ 2011.9

Master, School of Mechanical Engineering, Xi'an Jiaotong University

2006.9 ~ 2010.9

Bachelor, School of Engineering Mechinery, Chang'an University

英文论文：

2026年：

(30) Hui ZHANG(*), Songjie DAI(*), Jiawei CHEN, Liangdong SU, Liguo QIN(*), Yang LIU, Guangneng DONG. 3D Capillary Liquid Diode for Selective Liquid Steering and Smart Lubrication[J]. Advanced Functional Materials, 2026: e75947.（1区，顶刊）   https://doi.org/10.1002/adfm.75947

(29) Songjie DAI, Hui ZHANG(*), Bohan HU,Fenghao YI, Yang LIU, Baotong LI, Guangneng DONG. Striped fluid-guiding surface textures for wetting adjustment and starved lubrication improvement[J]. Tribology International, 2026, 220: 111904.（1区，顶刊）  https://doi.org/10.1016/j.triboint.2026.111904

(28) Songjie DAI, Hui ZHANG(*), Yang LIU, Fenghao YI, Kaibin SHI, Guangneng DONG. Bulk-cusp microstructure for controllable multi-directional liquid spreading[J]. Nature Communications, 2026, 17: 1519.（1区，Nature 子刊）  https://doi.org/10.1038/s41467-025-68237-8

2025年：

(27) Hui ZHANG(*), Songjie DAI, Yang LIU, Yijun ZHU, Guangneng DONG. Arch shaped high curvature edge design for selective microfluidics[J]. Chemical Engineering Journal, 2025, 524: 168916.（1区，顶刊）  https://doi.org/10.1016/j.cej.2025.168916

(26) Songjie DAI, Hui ZHANG(*), Yang LIU, Shili GUO, Jiawei CHEN, Baotong LI, Guangneng DONG. Gallium based liquid metal as a special lubricant: A review[J]. Friction , 2025, 13, 9441047.（1区，顶刊）  https://doi.org/10.26599/FRICT.2025.9441047

2024年：

(25) Hui ZHANG(*), Pu WANG, Yang LIU, Songjie DAI, Yijun ZHU, Baotong LI(*), Guangneng DONG(*). Stretch-controlled branch shape microstructures for switchable unidirectional self-driven spreading of oil droplets[J]. ACS Applied Materials & Interfaces , 2024, 16(31), 41694-41703. https://doi.org/10.1021/acsami.4c07736

(24) Hui ZHANG(*), Songjie DAI, Yang LIU, Yijun ZHU, Yangdong XU, Baotong LI, Guangneng DONG. Fishbone-like micro-textured surface for unidirectional spreading of droplets and lubricity improvement[J]. Tribology International, 2024, 198, 109932.（1区，顶刊）https://doi.org/10.1016/j.triboint.2024.109932

(23) Yang LIU, Jiawei CHEN, Hui ZHANG(*), Hanchi GOU, Guangneng DONG. Wedge-shaped lyophilic pattern on superlyophobic surface for unidirectional liquid guidance and lubrication enhancement[J]. Tribology International, 2024, 194, 109552.（1区，顶刊）https://doi.org/10.1016/j.triboint.2024.109552

2023年：

(22) Yang LIU, Hui ZHANG(*), Yijun ZHU, Jiawei CHEN, Pu WANG, Songjie DAI, Xing LI, Guangneng DONG. Bionic jaw-like micro one-way valve for rapid and long-distance water droplet unidirectional spreading[J]. Nano Letters, 2023, 23, 5696-5704.（1区，顶刊）https://pubs.acs.org/doi/10.1021/acs.nanolett.3c01317

(21) YFagla Jules MAWIGNON, Liguo QIN(*), Mebhoob HUSSAIN, Hao YANG, Xiaodong HUANG, Inno Lorren Désir MAKANDA , Faisal RAFIQUE, Hui ZHANG(*). Laser surface texturing under transformer oil conditions for improved process quality and tribological behaviors[J]. Materials Chemistry and Physics, 2023, 295, 127095. https://doi.org/10.1016/j.matchemphys.2022.127095

2022年：

(20) Yang LIU, Hui ZHANG(*), Pu WANG, Zunyan HE, Guangneng DONG. 3D-printed bionic superhydrophobic surface with petal-like microstructures for droplet manipulation, oil-water separation, and drag reduction[J]. Materials & Design, 2022, 219: 110765.（1区，顶刊）https://doi.org/10.1016/j.matdes.2022.110765

(19) Yang LIU, Hui ZHANG(*), Songjie DAI, Guangneng DONG. Designing a bioinspired scaly textured surface for improving the tribological behaviors of starved lubrication[J]. Tribology International, 2022, 173: 107594.（1区，顶刊）https://doi.org/10.1016/j.triboint.2022.107594

(18) Hui ZHANG(*), Yang LIU, Songjie DAI, Feifan LI, Guangneng DONG. Optimization of boundary slip region on bearing sliders to improve tribological performance[J]. Tribology International, 2022, 168: 107446.（1区，顶刊）https://doi.org/10.1016/j.triboint.2022.107446

2021年：

(17) Yang LIU, Hui ZHANG(*), Guangneng DONG. A design of partial textured surface on gear washers for reducing friction and wear under low speed and heavy load conditions[J]. Materials, 2021, 14(16): 4666. https://doi.org/10.3390/ma14164666

(16) Wei WANG, Wenhan ZHAO, Yang LIU, Hui ZHANG(*), Meng HUA, Guangneng DONG(*), Tam HonYuen, Chin KwaiSang. A pocket-textured surface for improving the tribological properties of point contact under starved lubrication[J]. Materials, 2021, 14(7): 1789. https://doi.org/10.3390/ma14071789

(15) Yuquan NI, Hui ZHANG, Guangneng DONG(*). Tribological performances of modified Babbitt alloy under different sliding modes[J]. Journal of Tribology-ASME, 2021, 143(6): 061402. https://doi.org/10.1115/1.4050524

(14) Hui ZHANG(*), Yang LIU, Zhiwei ZHANG, Meng HUA, Guangneng DONG. A superhydrophobic surface patterned with hydrophilic channels for directional sliding control and manipulation of droplets[J]. Surface and Coatings Technology, 2021, 409: 126836.（1区，顶刊）https://doi.org/10.1016/j.surfcoat.2021.126836

2020年及以前：

(13) Hui ZHANG(*)，Yang LIU，Baotong LI，Meng HUA, Guangneng DONG. Improving processing quality and tribological behavior of laser surface textures using oil layer method[J]. Tribology International, 2020, 150: 106353.（1区，顶刊）https://doi.org/10.1016/j.triboint.2020.106353

(12) Hui ZHANG(*)，Yang LIU，Mahshid HAFEZI, Meng HUA, Guangneng DONG. A distribution design for circular concave textures on sectorial thrust bearing pads[J]. Tribology International, 2020, 149: 105733. （1区，顶刊）https://doi.org/10.1016/j.triboint.2019.04.017

(11) Hui ZHANG(*)，Yang LIU，Meng HUA, Guangneng DONG. A laser scanning method to control the location, shape, contact angle and sliding of water droplet on superhydrophobic surface[J]. Advanced Engineering Materials, 2019, 21(7): 1801375. https://doi.org/10.1002/adem.201801375

(10) Hui ZHANG(*)，Yang LIU，Meng HUA, Dongya ZHANG, Liguo QIN, Guangneng DONG. An optimization research on the coverage of micro-textures arranged on bearing sliders[J]. Tribology International, 2018, 128: 231-239.（1区，顶刊）https://doi.org/10.1016/j.triboint.2018.07.033

(9) Hui ZHANG(*), Mahshid HAFEZI, Guangneng DONG(*), Yang LIU. A design of coverage area for textured surface of sliding journal bearing based on Genetic Algorithm[J]. Journal of Tribology-ASME, 2018, 140(6): 061702. https://doi.org/10.1115/1.4039958

(8) Hui ZHANG(*), Guangneng DONG(*), Guozhong DONG. A mixed elastohydrodynamic lubrication model based on virtual rough surface for studying the tribological effect of asperities[J]. Industrial Lubrication and Tribology, 2018, 70(2): 408-417. https://doi.org/10.1108/ILT-07-2017-0214

(7) Hui ZHANG, Meng HUA, Guozhong DONG, Dongya ZHANG, Wangjian CHEN, Guangneng DONG(*). Optimization of texture shape based on Genetic Algorithm under unidirectional sliding[J]. Tribology International, 2017, 115: 222-232.（1区，顶刊）https://doi.org/10.1016/j.triboint.2017.05.017

(6) Hui ZHANG, Guangneng DONG(*), Meng HUA, Kwaisang CHIN. Improvement of tribological behaviors by optimizing concave texture shape under reciprocating sliding motion[J]. Journal of Tribology-ASME, 2017, 139(1): 011701. https://doi.org/10.1115/1.4032971

(5) Hui ZHANG, Guangneng DONG(*), Meng HUA, Feifei GUO, Kwaisang CHIN. Parametric design of surface textures on journal bearing[J]. Industrial Lubrication and Tribology, 2015, 67(4): 359-369. https://doi.org/10.1108/ILT-08-2013-0089

(4) Hui ZHANG, Meng HUA(*), Guangneng DONG(*), Dongya ZHANG, Kwaisang CHIN. A mixed lubrication model for studying tribological behaviors of surface texturing[J]. Tribology International, 2015, 93: 583-592.（1区，顶刊）https://doi.org/10.1016/j.triboint.2015.03.027

(3) Hui ZHANG, Liguo QIN, Meng HUA(*), Guangneng DONG(*), Kwaisang CHIN. A tribological study of the petaloid surface texturing for Co-Cr-Mo alloy artificial joints[J]. Applied Surface Science, 2015, 332: 557-564.（1区，顶刊）https://doi.org/10.1016/j.apsusc.2015.01.215

(2) Hui ZHANG, Dongya ZHANG, Meng HUA(*), Guangneng DONG(*), Kwaisang CHIN. A study on the tribological behavior of surface texturing on Babbitt alloy under mixed or starved lubrication[J]. Tribology Letters, 2014, 56(2): 305-315. https://doi.org/10.1007/s11249-014-0410-4

(1) Hui ZHANG, Meng HUA, Guangneng DONG(*), Dongya ZHANG, Kwaisang CHIN. Boundary slip surface design for high speed water lubricated journal bearings[J]. Tribology International, 2014, 79: 32-41.（1区，顶刊）https://doi.org/10.1016/j.triboint.2014.05.02