个人信息 更多+
  • 教师姓名: 黄佐华
  • 教师英文名称: Zuohua Huang
  • 性别: 男
  • 职称: 教授
  • 职务: 教授
  • 博士生导师: 是
  • 硕士生导师: 是
  • 学历: 博士研究生毕业
  • 学位: 博士
  • 所在单位: 能源与动力工程学院 绿色氢电全国重点实验室
  • 电子邮箱:
  • 办公地点: 西安交通大学兴庆校区北二楼四层
  • 联系方式:

论文成果

当前位置: 中文主页 - 科学研究 - 论文成果

Characteristics of the ignition and combustion of biodiesel fuel spray injected by a common-rail injection system for a direct-injection diesel engine (PDF)

发布时间:2025-04-30
点击次数:
发布时间:
2025-04-30
论文名称:
Characteristics of the ignition and combustion of biodiesel fuel spray injected by a common-rail injection system for a direct-injection diesel engine (PDF)
发表刊物:
J Automobile Eng
摘要:
The effect of injection pressures at 100MPa and 200MPa respectively on the ignition
and combustion characteristics of biodiesel fuel spray injected by a common-rail injection
system for a direct-injection diesel engine was investigated. Two biodiesel fuels (namely biodiesel fuel from palm oil (BDFp) and biodiesel fuel from cooking oil (BDFc)) and JIS#2 diesel fuel were utilized in this research. TheMie scattering technique was used to characterize both the non-evaporating and the evaporating spray formation processes. The OH chemiluminescence technique was used to determine the ignition and the lift-off length of the combusting flame. Two-colour pyrometry was applied for the soot formation processes. At all injection pressures,
the biodiesel fuels (especially BDFp) gave a longer spray tip penetration and a smaller spray angle under the non-evaporating conditions while the liquid-phase penetration length was longer for the biodiesel fuels than for diesel under the evaporating conditions. From estimation using a simplified model for air entrainment by the sprays, the BDFp and BDFc exhibited lower mass ratios of air to fuel than diesel did. The ignition delay was longest for the BDFc while it was shortest for the BDFp. Both the experimental and the predicted flame lift-off lengths for the BDFp were the shortest, indicating the least percentage of entrained stoichiometric air upstream. There
was no significant difference between the integrated and averaged KL factors at 100MPa injection pressure for the BDFc and diesel fuels. At 200MPa, the BDFc presented much lower integrated and averaged KL factors than diesel did. The averaged flame temperatures of the BDFc were found to be lower than that of diesel. The oxygen content in the BDFc played a significant role in the soot formation in comparison with the oxygen from the percentage of stoichiometric
air entrained upstream of the lift-off length
合写作者:
Kuti OA, Wang XG, Zhang W, Nishida K, Huang ZH
卷号:
2010, 224(12):1581-1596
页面范围:
1581-1596
是否译文:
否
发表时间:
2010-11-20