个人信息 更多+
  • 教师姓名: 黄佐华
  • 教师英文名称: Zuohua Huang
  • 性别: 男
  • 职称: 教授
  • 职务: 教授
  • 博士生导师: 是
  • 硕士生导师: 是
  • 学历: 博士研究生毕业
  • 学位: 博士
  • 所在单位: 能源与动力工程学院 绿色氢电全国重点实验室
  • 电子邮箱:
  • 办公地点: 西安交通大学兴庆校区北二楼四层
  • 联系方式:

论文成果

当前位置: 中文主页 - 科学研究 - 论文成果

Burning velocity and statistical flame front structure of turbulent premixed flames at high pressure up to 1.0 MPa (PDF)

发布时间:2025-04-30
点击次数:
发布时间:
2025-04-30
论文名称:
Burning velocity and statistical flame front structure of turbulent premixed flames at high pressure up to 1.0 MPa (PDF)
发表刊物:
Exp Thermal Fluid Sci
摘要:
Statistical flame front structure of turbulent premixed flames at high pressure up to 1.0 MPa was measured on a nozzle-type Bunsen burner with OH-PLIF technique. Turbulent burning velocity, flame surface density and flame brush thickness, as well as the local curvature and radius of curvature were derived from the experimental OH-PLIF images. Turbulence–flame interaction was analyzed based on the geometric parameters combined with laminar flame properties and turbulence length scales. Results show that the flame wrinkles at high pressure are dominated by small scale cusps superimposed with large scale flame branches which is a general characteristic of the turbulent premixed flames at high pressure. ST/SL increases remarkably with u′/SL and the influence of elevated pressure on ST/SL is significant. This is mainly due to the increase of flame front area caused by the turbulence wrinkling. Flame surface density significantly increases with the increase of pressure indicating that there is a large amount of fine cusps and small wrinkles in the flame front at high pressure. This would be due to the enhancement of the flame instability represented by effective Lewis number Leeff and flame intrinsic instability scale li. With the increase of turbulence intensity, the Σ at high pressure increases while slightly decreases at normal pressure. The most frequent length scale of the flame front moves to smaller value and the possibility increases with the increase of u′/SL for all pressures. The effect of flame intrinsic instability on finer flame front at high pressure is mainly on the formation of a large number of convex structures which enlarge the effective contact surface between flame front and unburned reactants, resulting in the increase of ST/SL.
合写作者:
Wang JH, Yu SB, Zhang M, Jin W, Huang ZH, Chen S
卷号:
2015, 68: 196-204
页面范围:
196-204
是否译文:
否
发表时间:
2015-05-10